Even using the MAC Filter as a device can circumvent my Wi-Fi coming from anAirPort Extreme and using WPA2?

Hello friends,
Even using the MAC Filter as a device can circumvent my Wi-Fi coming from anAirPort Extreme and using WPA2?
The device in question is known and therefore not using MAC address cloning.
I'm using version 5.6 of the AirPort Utility, since the new version does not provide a graph of signal from each connected client.
The MAC address in question is selected, but were covered for safety reasons.
Help me understand this question.
Fig01. The MAC addresses listed in my device.
Fig02. The devices connected to my network. Including the unauthorized device.
Fig03. The history of connected clients on my network.

It appears that you may be using the Timed Access settings.
Check the "Default Rule" for your network. If the "Default" is Unlimited Access.....then any device that has the password for your wireless network will be allowed to connect at any time that they wish.
You need to change the "Default" rule for the network to "No Access".
Then devices will be only be allowed to connect according to the rules and time limits that you establish and configure for each individual device.

Similar Messages

I used to be able to drag the numbers when using the matte filter. Now I can't. Does anyone know why or have a solution

The only way to use the matte filter is to adjust the numbers in the filters tab in the viewer. Please advise

Do you have the View Mode set to Preview?
Are you clicking the Point Control for the point you want to move before clicking on the Canvas?
MtD

How should I set up my VI so that I can use the linear fit coefficient data analysis program, when my values are coming from while loops within a sequence structure?

I'm attempting to create a calibration program, using the printer port, and a Vernier Serial Box by modifying a calibration program designed for the serial box.
There are six calibration points, and to collect them, I have it controlled by while loops so that the numbers are taken when a button is pushed, and this is inside a sequence structure so that I can get the six different points. I feed these numbers into two different arrays (for x and y values) and then try to use the linear coefficient analysis on these points, but the values for the slope and intercepts it returns are not correc
t.
If I cut out the array and coefficient analysis, and feed the same numbers in directly without the while loop and sequence structures, it produces the proper values... I don't know why the numbers it is producing are different, and I'd really like to know.
Thanks,
Karinne.

I would use a data manager sub-vi that would be called by each from of the sequence structure that produced a data point. The data manager sub-vi could auto append new items or could place items in a specific entry of an array. Later on when you want to calculate the linear fit, call the sub-vi to return the array of values.
Stu

How do I transfer my music from my ipod to my laptop? I have Windows 7 and using the newest itunes update. These are all songs that were burned from cd's and such and weren't actually purchased through itunes.

I try to play a song but an exclamation point shows up saying the file could not be located. They play on my 1st gen video ipod just fine. It does that with more than half of my songs. Originally I had my songs in an external hard drive but the HDD fell once and since then it hasn't been connecting to my laptop. Now the songs that I used to have back then won't play on my itunes unless u plug in the HDD which my laptop won't detect. Is there a way for me to transfer my working songs to my itunes from my ipod so they'll all play again? im getting ready to buy and ipod touch but it's not good if most of my songs don't transfer because of the "missing files".

Tarantulaman wrote:
i do, but like i said it fell once and since then it hasn't been able to connect to my laptop. it acts like nothing's connected. i believe if i call the company the HDD is from they'll be able to transfer it to a new one but who knows how much they'd charge. looks like i have no choice now.
If it were truly a backup, then the media would play on the laptop as it would be on the laptop.
Sounds like you actually do not have a backup, instead you chose to keep your media on an external drive.
Regardless of where the media is stored, it's always a good idea to have a backup for instances like this.

HT1386 Can I delete an Apple ID from my iPhone and use another one instead?

I have used a family member's Apple ID and now I have my own and would like to sync my iPhone with my new ID. Can I do that and keep the apps I have already downloaded? They are all free apps but I can get them again if needed. I just need to know how to get the new ID on my phone.
Thanks!

You will keep the Apps you have, but you will not be able to update them unless you sign back into that Apple ID.
Go into Settings > Store, at the bottom select your Apple ID, sign out, and sign in with the new one.

Can I buy a iphone 6 from new york and use it in romania ? is it neverloked ?

I have a friend which is in new york until 13 oct. and he wants to buy an iphone 6 for me. I don'w know if can i use it in romania my country...

I don't know if a apple store will ship it to mexico but even if they wouldn't you could ship it there yourself.

My iphone 4s got water in the headphone port. I put my phone in rice for 24 hours and the LED light is on. It stays on even when the phone is off. How can I fix it with out spending 200 bucks at apple to have them fix it?

My iphone 4s got water in the headphone poert. I put my phone in rice for 24 hours and the LED is on. It stays on even when the phone is off. How can i fix it without taking it to apple and spendding 200 dollars to have them fix it?

Short answer is you probably cannot. Once water gets inside the device and it is powered on, the damage likely is permanant.

Can I acquire data with VB from my DAQCard without using Measurment Studio?

I have the Measurement and Automation Software on my computer and VisualBasic.NET. Do I need any other software if I am receiving 2 analog signals and outputing 1 analog signal on my NI DAQCard-6024E PCMCIA?

The short answer is yes, you can acquire data with VB.NET from your DAQCard without using Measurement Studio.
There are a variety of ways to do it. All of them require that you install either the Traditional DAQ driver or the DAQmx driver in addition to Measurement and Automation Explorer. The DAQ drivers are included on a CD or CDs with your hardware. They are also available on the quarterly National Instruments Device Driver CD.
1) You can use the Measurement Studio DAQmx .NET API. This is far and away the easiest API to use to program DAQ cards in VB.NET and C#. This API is included in the DAQ installer and does not require you to purchase Measurement Studio. However, without Measurement Studio you do not get the benefit of the DAQ Assistant integrated into Visual Studio .NET. The DAQ Assistant, when integrated into Visual Studio .NET, allows you to graphically configure your DAQ tasks, generates the code you need to configure your tasks, and generates a .NET user control (with user interface) that demonstrates how you use the tasks that you created. The caveat to this approach is that PCMCIA cards are not directly supported under DAQmx 7.0. There is, however, a beta versin of DAQmx PCMCIA support as described in this KB article.
2) You can use the .NET P/Invoke services to call the Traditional DAQ or DAQmx C API directly. See MSDN for more information about P/Invoke. If you choose the DAQmx API, you will need to install the beta of the PCMCIA support as described in this KB article. National Instruments does not provide any examples, language-specific documentation, or code generation for this method. You'll need to look at the C API documentation to see what to do.
3) You can use the Measurement Studio Traditional DAQ ActiveX controls. These are included in the DAQ installer and do not require you to purchase Measurement Studio.
The absolute quickest and easiest way to get started using an NI-DAQ card in VB.NET is through the DAQ Assistant and Measurement Studio Professional or Enterprise edition.
Your next best approach is to use the native .NET DAQmx API. This API was designed from the ground up to support .NET languages. There are examples written in VB.NET to help you get started.
If for some reason, you don't want to use the native .NET API (or your hardware is not supported under DAQmx), whether you use P/Invoke or the ActiveX controls is a toss-up. It depends mostly on whether you are already familiar with the C API or the ActiveX API.
David Rohacek
National Instruments

I have 1Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both those devices use different Apple ID's than the Mac does? As in can I set up 'find device' for my husband's iPhone and my daughters iPad?

I have 1 Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both of these devices use different Apple ID's than the Mac does? As in, can I set up 'find my "device"' for my husband's iPhone and my daughters iPad?

Welcome to the Apple Community.
No, but you can log into any of their accounts on your computer at iCloud.com and see their devices.

HT203167 i have purchased 100 songs in last 2 years on itunes now i am able to find the first 50 songs i am using the original id in all my devices.i even got the invoice of my purchase where can find them all?

i have purchased 100 songs in last 2 years on itunes now i am able to find the first 50 songs, i am using the origial id in all my devices.i even got the invoice of my purshace where can find them all?
ITS NOT EVEN SHOWING UP IN PURCHASED SECTION

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

Use the Mac OS dictionary vs. add on dictionary for spelling in Firefox

I have a series of questions related to the OS dictionary and about looking up the definitions of words and spelling. With Safari I could use Command+: to turn on Spell checker and loved using it. I have spell checker turned on with FireFox via Preferences/Advanced/Check my spelling as I type and like the other method better. I suppose I could get used to the method FireFox uses, but don't understand why cmd: can't work too. I even went in through system preferences and added it as a keyboard shortcut for Firefox without success. I dont' see anything in the pulldown menu's using that key-combination so what's blocking it? Another important feature that doesn't work is I can't click on a word to look up the definition. That's an important feature and I use it often. Because of these I stopped using firefox and continue using Safari even though Safari doesn't work for a main site I visit. Safari is also generally slow and locks up constantly causing me a lot of grief. If the problems I wrote about worked I wouldn't use Safari again and would commit to using Firefox. I would appreciate knowing how to do what I'm trying to do. Thanks,
Chris

Thanks for the suggestions. I installed firefox 16.0.2 and see additional features but still can't use the Mac dictionary or spell checker. I'm going to install the latest OS on this computer then I'll be able to install the latest version of firefox. The newest OS I can use on my other computer is 10.4.8 as it's a PowerBook and doesn't have an Intel CPU. Maybe I just can't do these commands.
How do I reset FireFox?

The pdfs that are produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter. Is their a suitable free compression programme,

The pdfs that I produce in Word are very large. I need a method of compressing them variably - not just a quick reduction using the quartz filter. Is their a suitable free compression programme,

PDF Shrink for Mac
Compress PDF – Reduce your PDF Online
PdfCompress for Mac

Image Preview grey out when using the Radial Filter

Hi,
I am trying to use the radial filter on my photo in the Lightroom 5, but my problem is that when I tried to create the eclipse with my mouse drag on my photo, the photo immediate disapper and grey out, once then, I cannot do anything with my photo
Even I tried to change other parameter for example changing the color temperature....etc., the photo is still disappearing and grey out, nothing showin in the photo display area.
The program is not hanged, it's just that the photo not displaying, I have to click the Library module and then click again the Develop module, then the photo appears again.
Is there anyone encountering this issue and share with me any solution ?
( I wonder if it's because my laptop below the Lightroom required spec, my laptop is Intel i5 2.4G with 4G RAM)
Thanks.

My sincere thanks to those trying to help me. I've found the problem and feel extraordinarily stupid. In looking at screenshots in a tutorial, I realized the box that pops up for the controls for the graduated filter was collapsed on my screen. Once I clicked the arrow and got the proper controls, it works like it should. It's been a while since I felt this dumb!! But I guess that's why they call it the Beginner's forum, eh?
Thanks again!

I am using the mac QQ and when I login it said login timeout.

I am using the mac QQ and when I login it said login timeout.

If you are missing using google maps - try the Nokia map app called "here"

How to I get a link with a "Mail to" address to open up a Compose window in my Yahoo mail, rather than in the Mail progrom on my Mac. I do not use the Mac Mail program.

How to I get a link with a "Mail to" address to open up a Compose window in my Yahoo mail, rather than in the Mail progrom on my Mac. I do not use the Mac Mail program.
== This happened ==
Not sure how often
== always

Thank you, "the-edmeister" -- You render a great service, one that lifts my spirits.
Your answer also taught me to be a little more persistent, as I had started looking at Preferences, and just didn't notice the icons (including Applications) at the top of that window that would have led me to my answer.
Dave

Even using the MAC Filter as a device can circumvent my Wi-Fi coming from anAirPort Extreme and using WPA2?

Similar Messages

Maybe you are looking for