Even with recent powerbook g4 buy should i keep eye open for something newer

Last week bought powerbook g4 that runs well; August 05 15", 1.67ghz, 2gb ram, 250gb hd, ilife & iwork 09, good dvd, cosmetically fine.
Considering drawbacks of such old system will it be smart also purchasing newer Apple model? Having Macbook Pro in mind what kind of specs should be included assuring I'm  not stuck with two antiquated systems around same time? Thanx

Hello,
Well I've just recently purchased a MacBook Pro 2.4Ghz duo core 17" from 2007.
It's not the most powerful, but it was a good price and runs the latest version of Mac OS X 10.8. The way I look at it, it's going to be at least two years or more before mountain lion will become obsolete .
Should serve me well for a least two years and at £200 (300 USD) it's an affordable price.
Sadly it means I won't be using my PowerBook G4 17" as much.
But spec wise, look for a MacBook Pro 15/17 inch that mid to late 2007 plus
The more RAM the better the performance.
If it can run Mac OS X 10.8 then your know it want be too obsolete for a while.

Similar Messages

  • Help!Can't access iCloud (pics apps) even with correct password. Won't download my stored info on my new phone

    Help!Can't access iCloud (pics apps) even with correct password. Won't download my stored info on my new phone

    That happens because photo stream photos only remain in iCloud for 30 days, even though your last 1000 photo stream photos remain on your devices until deleted.  When you enabled photo stream on your iPod 4, you only received photo stream photos from the last 30 days as older photos are no longer in iCloud.  If you want to stream these older photos to your new iPod, you will have to create a shared photo stream on your old one that contains these photos (requires iOS 6 or higher) and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99.

  • HT4436 i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?

    i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?

    Question is did you lock your Mac from Find my iPhone using iCloud or is the Macbook really yours?
    If you have in fact locked your Mac using Find my iPhone on iCloud then you will need to enter the PIN you have set when you locked the Mac.
    *If you have not iniate the remote Lock then someone else has used your Apple ID and Password to lock your mac.
    Message was edited by: Ammadz

  • I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

    I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

    Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

  • Back-up doesn't progress. I have a large catalog...should I keep waiting or is something wrong?

    I am trying to do an incremental back-up. The Organizer has been calculating total media size for over 14 hours and is still at the initial 3%.  I have a large catalog.Should I keep waiting or is something wrong?

    I have mine set to not push or automatically check my email, it only checks my email when I actually use the mail app. I also keep 3G turned off unless I'm using an app that needs to get online like safari, mail or Pandora radio. Just this week I wanted to see how long it would last with my normal usage to go from full to zero and it was in stand by most of the time but I played a few games, used safari and mail a few times (I use 3G at work but at home it's turned off b/c I use my wifi connection)used it as an ipod a couple times in the car, had a few phone calls and several text messages and I think I played around with the GPS and map utility on the drive home from work one day and in the end it lasted almost 48 hours. I was plugged into my laptop for about 5-10 minutes to sync so it was charging then but overall I was quite happy with the battery.
    3G and automatic mail checking certainly drains the battery but I expected that when I got it. I wish there was a button on the home screen to turn 3G on and off instead of having to go into the control panel but it's not too inconvenient.
    Remember that Apple recommends that you fully cycle the battery once a month, fully charge it then let it drain to zero then fully charge it again.
    Check out these tips for maximizing battery life.
    http://www.apple.com/batteries/iphone.html
    Hope that helps.

  • I have a lot of videos processed using elements 2.  I have bought a MAC.  If I buy the newest version of elements for my new mac, will i be able to easily transfer the videos to the newest version i.e. will the new software automatically integrate the wor

    I have a lot of videos processed using elements 2.  I have bought a MAC.  If I buy the newest version of elements for my new mac, will i be able to easily transfer the videos to the newest version i.e. will the new software automatically integrate the work done on those videos.  What is my best option to transfer those videos to my new mac.  Thanks

    phyli2
    What is your "Elements 2" - Photoshop Elements 2 or Premiere Elements 2? For now I will assume Premiere Elements 2 which had to be on some version of Windows.
    What do you have from Premiere Elements 2 - project files (.prel) or exports to file formats such as .avi or .mpg or .mov?
    Project files from Premiere Elements (any version) Windows cannot be used in Premiere Elements (any version) Mac.
    Video files exported from Premiere Elements 2 with its QuickTime choice (.mov files) would be likely to open in Premiere Elements 13 Mac. The other Premiere Elements
    2 choices of MPEG and Windows Media would be expected to need conversion to .mov or .mp4 before import into Premiere Elements 13.
    In Premiere Elements 13 Mac, consider importing the files from wherever you save files in Mac to a project with the project's Expert workspace Add Media/Files and Folders/Project Assets. I would strongly encourage you to set the project preset manually (File Menu/New/Project) to match the properties of these source files before import rather than let the project do it manually for you based on the properties of the first video dragged to the Timeline.
    Please supply more details so that we can fine tune the reply. Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Do i need to buy anti-virus or internet security for my new mac?

    Do I need to buy anti-virus or internet security for my new mac?

    No.
    See this Discussion
    https://discussions.apple.com/message/16532409#16532409
    From the  More Like This  on the right.

  • HT1338 With recent iphoto update, i can't seem to open any photos.  They appear but when i dble click to select a photo to work with, no luck.  Any help?

    With recent iphoto update, i am having problems opening individual photos.  The photos are there when i scroll through, but when i select one to work with, nothing opens. Any suggestions?

    Thanks for your reply.  I did this, but I still can't open any photos when clicked on; "Faces"  don't appear over names; when I try to upload a photo while in facebook...I can't.  I think this is when i first discovered the problem.  Don't know what else to do except take in laptop.

  • My iPhone 5 is charging but wont turn on even with the hard reset and restore. Keeps showing low battery. HELP PLEASE

    My iPhone 5 shows it's charging but wont turn on even with the hard reset and restore. Just keeps showing low battery. HELP PLEASE
    I usually sleep with my phone on charge through the night and I haven't had any problem since, I left my iphone 5 charging last night and in the morning it stated 100% charged so I decided to turn the power off normally (Hold the hold button till it says slide to turn power off) I turned it off and suddenly my iphone went straight to low battery. Although I have been having weird battery percentage changes for example it would stay on 1 % for an hour or so or drain really quickly.
    I have restored it as i thought was the thing to do all it's doing it restoring and still stating low battery and I have charged it for hours +. I can't hard reset it nor restore it NEED HELP PLEASE.
    Most Apprieciated.

    Hello, skittles_5ive. 
    Thank you for visiting Apple Support Communities. 
    You may find this article helpful in troubleshooting your issue.  If all troubleshooting steps have been processed please see step 6. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Regards,
    Jason H.

  • Should I get Microsoft office for my new MBP?

    I ordered my MPB 13" online and added iWork. It was much cheaper than Microsoft Office and looked nice and fancy Should I get Microsoft Office too? I had it on my old laptop (not a mac).
    I'm a university student so I am unsure if iWork will be as compatable with lecture ppts and notes etc.
    Any suggestions?

    It may depend on what your major is, but iwork should be an excellent program for your use at college. I've used both Microsoft office and iWork for years. iWork is much more intuitive than MS office and is less $. You can save documents from iWork in MS office format. I've heard there are some advanced features in MS office that iWork doesn't have, but I've never needed them in my professional use.
    You might try iWork and see how it works and if you need to get MS office in the future it's pretty inexpensive since you are a student.
    Good luck.
    M.

  • Quicktime not playing even with recent Codecs

    Hi,
    I apologize if this is not the correct forum, I wasn't too sure where to post.
    I had a Promo video done for my business, it's in .mov format and played fine in Quicktime when I first received it.
    Recently it stopped working, Quicktime opens to a black screen, my file name shows at the top and the Windows "loading" circle is spinning but nothing happens.
    I have uninstalled/reinstalled Quicktime, installed all possible Codecs as listed in an Apple support page that I found (it had links to various Codecs required for Windows).
    I have Windows 7 Home Premium 64-bit, service pack 1 and Quicktime 7.7.4
    What kills me is that this file was working!!
    Any help that I can get is really appreciated!

    I also have a similar problem in Snow Leopard but it happens with Safari and all other browsers. Whenever I try to access embedded QT content I get the message "Required Plugin Misssing" and no QT plugin appears in the list for me.  When I attempt to install the plugin I get to an Apple page telling me that it is now built in to OS X. If I try to install an older version the OS will not allow it.  QT works fine outside of the browsers. From what I can tell this happened after a software update, my mac mini was hardly turned on for around 3 months and then came back into service.
    I've poked around for about a month now and found that this is affecting quite a few mac users and has been for quite a while now.  No good solutions have come from the community so far, and from Apple, silence....
    QT is their propriotary format and it is not working for many in their native browser, and from all appearances they seem to be ignoring the problem.  I think they need to hang up their iphones, turn down their ipods, and turn off their ipads and start paying a little attention to the technology their company was built on.

  • I am looking to buy an imac, should i wait a bit for a new version to come out soon?  I use it for photo and video editing

    I have a very old MBP it is almost too slow to edit large files and video on any more it does ok but I am a pro photographer and video guy and I edit a lot
    I would like to know if I should get a new imac right now or wait a few weeks incase a new one will come out soon, anyone have any insider info or help?  thanks   mac rumors says one may come in about 70 days but isk if i want to wait that long

    Regarding your dilemma about a new device or using current device i'd have to agree with
    please read the Terms of Use, they say:
    SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.
    Now if you really nead advice about a certain product you already have and wish to compare it with a new product you could always ask advice of a sales advisor.
    Believe it or not sales advisors are not just for sales only =)
    Ask your personal sales advisor nearby your home or the closest apple store for advise about your dilemma.
    - so far what i can see is that you're a professional photographer looking for an improvement , now i'm quite positive that you will find your improvement sooner or later wich will make your work alot easier.

  • How much should I expect to pay for a new hard drive for my macro with 250

    How much should I expect to pay to replace damaged hard drive?

    Nowadays a 3.5" SATA drive with 1 TB of storage space is under $70.00 depending upon cache size and spindle speed. Enterprise level drives will cost more since they come with a longer warranty and have a heavier use capability. These are desktop drives.
    Your profile suggests you have a laptop model. Notebook sized drives are more expensive.
    Look at OWC to find suitable replacement drives and prices dependent upon what you need. It's hard to provide you the correct information because you did not tell us what type of drive needs replacing.

  • HT201210 I upgraded from iPhone 3G to 4S a few days ago. I choose the option to restore from my last 3G backup. It worked fine but I just realized that I do not have the new apps which come with the 4S. What should I do? Thanks for any help. Léo

    I upgraded from iPhone 3G to 4S a few days ago. When setting up the new 4S, I choose to restore my last 3G backup. It started by updating the OS to version 5.1 (9B179) then restored my apps and setting. Everything went well except that I realized I do not have the new apps which come with the 4S, like FaceTime, HD video and Siri.
    What should I do to correct this?
    Thank you in advance for any help on this.

    Ah, FaceTime is not an app, either. It's accessed by tapping the FaceTime button when you are in the contacts app and have selected a contact. This can also be done from the Phone app under the Contacts tab, or during a call, you can switch to FaceTime.
    Let me know what other apps/features you are missing.

  • Im already create a new id but still maintain with previous id n what should do to ensure there is a new id.

    Hi,
    Im using rightknow iphone4s. which just a 3hrs ago,n i created the new id was successful but still unable to login
    in new id so what should i do.
    Thank you

    Settings > iTunes and App Store > Apple ID = Sign Out...
    Then Sign In using the preferred Apple ID.
    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622

Maybe you are looking for

  • Acrobat Pro version 8.1.7

    I am on Snow Leopard (just switched and Acrobat Pro for the mac version 8.1.7. I am trying to create forms from PDF's I have. And when I make a box in an area where I need users to fill in and outline the box with a color, when I save this pdf and op

  • Reg F-32 to clear the Customer Account Balances

    Dear experts, My requirement is that i need to clear the customer account balances . It can be cleared manually thru tcode F-32. But i need to automate the process by writing BDC or BAPI or any FM. Pl help me by providing some inputs on that. Also he

  • Batch number not appearing in OIBT

    Dear Experts, I am facing a problem concerning a Receipt from production. In fact, I have a query running in order to print label. In this query I take the batch number on OIBT table, (link to IGN1 through Baseentry, BaselinNum and BaseType) There is

  • Track design in a complex transport landscape

    I have read the blog for <a href="/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development Best Practice</a> I have read the online help for <a href="http://help.sap.com/saphelp_nw04/helpdata/en/42/f1a03611

  • Seq number

    Hi, I have a master detail form.1 master block and 1 detail block. The join field name is called join_seq. I have a database sequence and i want to put the sequence number as a value for join_seq. In the pre_insert trigger of the form i wrote select