Evennt ID 257 Source Defrag. The file move failed. (0x89000016)

Hello,
   I have been getting this error every night. I cannot find our much about it online and it does not identify the file.
this is a virtual windows 2012 server
Log Name:      Application
Source:        VSS
Date:          6/10/2014 11:52:59 PM
Event ID:      8224
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Description:
The VSS service is shutting down due to idle timeout.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="VSS" />
    <EventID Qualifiers="0">8224</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-11T03:52:59.000000000Z" />
    <EventRecordID>1936293</EventRecordID>
    <Channel>Application</Channel>
    <Security />
  </System>
  <EventData>
    <Data>
    </Data>
Is there something I need too do?
Thanks

Hi Tdar,
Before going further, would you please let me know the complete edition information of this Windows Server
OS where this issue occurred? Is Windows Server 2012 Standard or any other? And please let me know the complete message of Event ID 257. Meanwhile, would you please let me confirm whether there has SSD on the Windows Server?
Please refer to the following article and check if can help you.
Regarding to Event ID 8224, please refer to the following TechNet article and check if can help you.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Hi 
I get the same event on all my VMs.  We are using 2012R2 Standard.We are not using SSD.
Detailed Event
Log Name:      Application
Source:        Microsoft-Windows-Defrag
Date:          29/07/2014 02:46:50
Event ID:      257
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxxxxxxxx
Description:
The volume Recovery was not optimized because an error was encountered: The file move failed. (0x89000016)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Defrag" />
    <EventID Qualifiers="32768">257</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-29T01:46:50.000000000Z" />
    <EventRecordID>2367</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxxxxxxxxxxx</Computer>
    <Security />
  </System>
  <EventData>
    <Data>Recovery</Data>
    <Data>The file move failed. (0x89000016)</Data>
    <Binary>00000000A40500005105000000000000629468641336AAB85B55B1B5B038000000000000</Binary>
  </EventData>
</Event>
 Any suggestions ? 

Similar Messages

  • Getting "Warning: The file upload failed.No such file or directory." while trying to upload image using af:inputFile

    Hi,
    I have a <af:inputFile> component which will upload only image file and render  the corresponding image...
    It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
    I get this warning message "Warning: The file upload failed.No such file or directory." for certain files where as it works for certain image files.
    And in BPM whenever i upload PNG file it throws this error.
    Please help.

    For some files like Images with .png extensions it gives following error :
    java.io.IOException: No such file or directory
      at java.io.UnixFileSystem.createFileExclusively(Native Method)
      at java.io.File.checkAndCreate(File.java:1705)
      at java.io.File.createTempFile0(File.java:1726)
      at java.io.File.createTempFile(File.java:1803)
      at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl._createOutputStream(UploadedFileImpl.java:284)
      at org.apache.myfaces.trinidadinternal.config.upload.UploadedFileImpl.loadFile(UploadedFileImpl.java:208)
      at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl._processFile(CompositeUploadedFileProcessorImpl.java:344)
      at org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.processFile(CompositeUploadedFileProcessorImpl.java:95)
      at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl._doUploadFile(FileUploadConfiguratorImpl.java:329)
      at org.apache.myfaces.trinidadinternal.config.upload.FileUploadConfiguratorImpl.beginRequest(FileUploadConfiguratorImpl.java:162)
      at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl._startConfiguratorServiceRequest(GlobalConfiguratorImpl.java:610)
      at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:216)
      at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:155)
      at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
      at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
      at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
      at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
      at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
      at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
      at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
      at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
      at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
      at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  • I want to install Indesign CC 2014. Once unpacking, the file installation fails. Since: 'it's impossible to unpack to temporary folder (EX11)'. How to resolve?

    I want to install Indesign CC 2014. Once unpacking, the file installation fails. Since: 'it's impossible to unpack to temporary folder (EX11)'. How to resolve?

    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

  • The file transfer failed internal error

    Hi,
    I've just transferred 10 MP3's to a Nokia 5800 and then when it came to the 11th file I got the message " The File Transfer Failed : Internal Error".
    I originally thought that the Nokia had no more space so I deleted lots of files but the error still happens.
    What's the problem here? Anyone any ideas?

    The only files you can transfer are address book cards. I'm not positive that it will work for your phone but you could try. Download the program Bitpim. You will be able to transfer photos, ringtones, and other cool things from phone to computer and computer to phone. Let me know if you can get it to work.
    -Audrey

  • HT1420 my laptop has been stolen. I have bought a new one but I can't download the files (movies, articles,...) that I have in my ipad into my new ipad so I can put some of them in my daughters mini ipad. How can i do it?

    My laptop has been stole. I have bought a new one but I can't download the files (homemovies, articles, presentations) from my ipad to the new laptop so I can share with my daughters in their mini ipads. Any ideas?
    I am working with Windows 8

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • The file reads "failed to convert from PDF to word"

    The file fails to convert to word.  What should I do?

    Hi,
    What is the error message it is showing?
    Is it happening with a single file or with every files?
    Try with different browser.
    Regards,
    Florence

  • Opening files from the "File" menu fails? Illustrator CC 2014

    I can open a couple of files from the "File" menu and then it just stops working. I'm on OS X 10.10.1. I've uninstalled everything and reinstalled and it still does this. If I restart Illustrator it will work for the first couple of files and then it fails again. Has anyone else had this issue? If so, is there a fix for this? I'm really tired of restarting just to open files.

    I wonder if it is the preference file then. At first I assumed it was a permission issue, but it sounds like that is not it.
    To fix the preference file -
    Hold down the ctrl-alt-shift (windows) cmd-opt-shift (mac) keys when starting Illustrator. If you do not see a dialog box asking if you want to reset the preferences let us know.

  • Source of the file can not be read

    Hi all ... maybe someone can give me some ideas?
    I have a client who is trying to download these video's.  Hunt you might remember we changes them over to the XVID - MPEG4 format.  Well, I'm still not able to get the downloads stable enough so that I feel confident to actually try to make money from their sales.  Anyway, my client tried to download them yesterday and got the following message. 
    Do you have any ideas as to what is going on and how I might fix this?
    THANKS!!!
    ERROR:
    C:\DOCUME l\OWNER\LOCALS l\Temp\ighWBWGG.avi.part could not be saved, because the source file could not be read
    There is another symbol that I duplicate. It comes after the DOCUME and after LOCALS..It a "wave"

    I think the one thing we can be sure of is that this is not a Premiere Elements issue .
    C:\Documents and Settings is not a 'user' usable folder in Windows 7. Perhaps it's for backward compatibility.
    Neither System nor Administrator has 'ordinary' access to that folder.
    I think you should investigate where the link is trying to Download to - I suggest you or your customer select Libraries> Downloads.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • TS3972 How can I access the files(movies,music,etc) in my Apple Time Capsule(4th Gen) from my Apple TV(3rd Gen). This is very frustrating Apple has not provided a basic feature, and me buying the Time Capsule and Apple TV is an complete waste of bucks.

    I have an Apple TV (3rd Gen) and Apple Time Capsule (4th Gen). How can I access Movies and Music stored in the Time Capsule from Apple TV. This is very  n't give frustrating that Apple doesn't give their customers with an straight forward access to their customers in between their own products. Iam repenting that buying these products is completely waste of bucks. Appreciate your help...

    Welcome to Apple Support Communities
    The Time Capsule is clearly announced as a router with a hard drive to make backups, not to store anything and share it with your Apple TV.
    To access to movies and music from the Time Capsule, note that the Apple TV can only access to them if they are stored in your iTunes library, so you will have to put your movies and music into iTunes to access to them, and then, put your iTunes library on the Time Capsule in order to access to your data from there

  • The file transfer failed: the connection failed!!!

    Hi all, I have been trying for 2 days to get this working. I have a Sony Ericsson K800i. I wish to transfer a file from my Macbook to the phone via bluetooth. Every single time the subject message popped out.
    Now I have tried transferring file from my phone to my macbook; from my phone to other phone; from my macbook to other phones all via bluetooth and they worked out okay...
    I checked my device support OBEX object push and other one that all this forum goers said it's important... what kills me is that I have sent file from my macbook to my phone before and now it suddenly stops working...
    Anyone has a clue? thanks!!!

    hello guys
    i have the exact same phone and I have a slightly close problem since the migration to Leopard.
    i can transfer a file from the computer to the phone, i can also transfer from the phone to the computer, but everytime i try to browse the phone with the bluetooth file exchange application, i have a "internal error" error message.
    nothing to do with the blutooth sharing, back with Tiger it was always off and evrything worked fine, and now i've tried with and without, nothing solves my problem.
    any idea?
    thx in advance
    vince

  • When I move a file from the desktop to trash, the file only moves to the trash after I open the trash

    So if I have a file on the desktop and I delete it, it makes the 'throwing it in the trash' sound but the trash can icon stays empty (if I don't already have something there) until I click on trash, and the file still appears to be on my desktop until I click the trash. If, after I've moved something to the trash, I then drag the file that seems to still be there around the desktop and drop it somewhere randomly, the file moves itself from the trash back onto the desktop! Can anyone help?
    Thanks, Dan

    Welcome to the Apple Discussions. Do you have Time Machine setup to backup your hard drive? If so you can use it to recover the files.
    If not you will need to use a file recovery application like SubrosaSoft FileSalvage. It lets you run the application to check the drive for files that can be recovered before having to purchase it. There are other similar applications out there also. You can go to VersionTracker.com and search for "file recovery" to get other possible apps.
    There are recovery services that can do the job for you. They are pretty expensive but if you can't get the recovery application to work they are another option.
    Try to use the computer as little as possible beforehand so you don't run the risk of overwriting the deleted files.
    OT

  • How to really edit source in .fla file?

    Hello,
       I am a Java programmer and I can read and edit most anything I get my hands on. I don't work much with flash and when  I do there is no reason to look at any sort of source.
       I received a file from someone to add to a project and the instructions were to open the .fla in CS5 and edit certain lines to pioint to directories . The file is and interactive app type.
       I have tried doing this but I am at a loss. I had thought that I would just be able to view some source in the file and edit those lines and export the ,swf, but I can see nothing like that. I see all these visual button tools that don't help me any.
       Can someone tell me how I can actually see source for the file to edit the content I need to?
    Thanks!

    Flash programming language(AS3) is similar to Java. So once you get familiar with Flash Pro IDE you should get going easily. So before proceeding any further I will suggest you to read followings:
    http://help.adobe.com/en_US/flash/cs/using/WSd60f23110762d6b883b18f10cb1fe1af6-7fb9a.html
    http://help.adobe.com/en_US/flash/cs/using/WSd60f23110762d6b883b18f10cb1fe1af6-7f13a.html
    This should get you started, then move on to following and explore in detail as and when you have time:
    http://help.adobe.com/en_US/flash/cs/using/index.html
    To answer your query you can edit the source by using Action Script editor which can be directly opened by pressing F9. Action Script code can also be directly written to seperate .as file instead of .fla in which case you open the .as file if the editor panel is not open press F9.

  • Getting error 8 during a file move with shortcuts

    Hello,
       I am using the file move vi to move files and shortcuts from one folder to another. This works file when I am trying to move files. but when I try to move a shortcut (a file with a extension of *.lnk) the move vi fails and gets a error 8 (permission error). Why is this happening? I am assuming that a shortcut is a file, so I am treating it as a file and therefore expecting the move vi to move the shortcut from one folder to another.
    Regards,
    Kaspar

    It could be that this is related to a bug that has already been discovered and reported. Our R&D deparment is working on it. When LabVIEW copies or moves a shortcut, it actually makes a copy of the file that is the target of the shortcut. However, it adds the ".lnk" extension to the end of the file name. This causes the new file to show up like a shortcut in Windows, but it is not a shortcut. If you rename the file and remove the ".lnk", then the file (the target of the original shortcut) will open without problem.
    One workaround it to use the System Exec VI to copy the file from the Windows command line. See the attached VIs.
    Jeremy P.
    Applications Engineer
    National Instruments
    Attachments:
    Move with Command Line for LNK.vi ‏16 KB
    Copy with Command Line for LNK.vi ‏36 KB

  • Photoshop Elements 11 Organizer failed during folder / file move

    I have a large image collection, in excess of 40,000.  I'm running on a PC with Windows 7 and all updates installed.  I just purchased PSE 11 to replace PSE 10. After installing PSE 11 I converted my catalog.  That seemed to go OK.  At that point I discovered that my C: drive was almost full so I decided to move my image collection from its C: drive location to an external hard drive that had sufficient capacity.  In order to ensure the integrity of the catalog I decided that I should use the PSE 11 Organizer to move the files.  This would allow the Organizer to update the location information for the files as it moved them, although it was clear that this would take many hours to complete.  So, using Organizer I did a "drag and drop" of my image collection's root file from the C: location to the external drive which happened to be the J: drive.  Organizer appeared to be running properly so I left it to continue overnight.  The next morning I discovered that only about 2/3 of the files had been moved.  There was a very cryptic message that said the opertion could not be completed because of "...possibly unsupported files types, files with read only attributes.." etc.  I did not write down the actual message and it did not tell me where in the transfer the failure occurred.  After doing some detective work I discovered that many folders and files had been copied to the J: drive that were not appearing in the Organizer catalog and consequently were not being displayed.  Some folders had only a portion of their files copied.  Fortunately, the files were still visible and cataloged on the C: drive.  I did look at my files on the C: drive and there were some that for what ever reason had read only attributes.
    I don't have a good guess as to what was actually the root cause of the problem, but here's how I think the file movement should happen.  The selected file, files, or folders should be copied to the specified destination.  At that point they should be added to the catalog, then the files should be deleted from their original location and the catalog updated accordingly.  If an original file is read only then it can't be deleted but the attempt to delete it should be reported as an inability to delete with no consequences imposed on the files that have been placed in their new location.  The "problem" should not be promoted to the status of a serious or fatal error that causes only partial completion of the overall operation.

    Bill Junk wrote:
    I've seen a couple postings in the forum that related to catalog conversion failures and suggested that they could be avoided by running in administrative mode.  When I did my conversion is was not in administrative mode and it's certainly possible that there were files with restrictive permission settings that screwed things up.  It's also fairly likely that the catalog itself had some issues that were not detected or fixed by running a catalog repair.
    That's something I had the opportunity to test today : after a fresh install of my second copy of PSE11 on another computer (Vista), I first restored without problem a PSE11 backup from the other computer (XP). Then I tried a restore for a catalog from a PSE6 version on the second computer. The conversion failed the first time and worked the second time when run as administrator. This time, I don't think there were file types problems, since that PSE6 catalog had been restored successfully on a PSE10 version some months ago. I really don't understand that 'administrator' problem, since all my files are situated in a second internal 1 Tb drive with full access for my account ?
    I am not sure about the details of your case, but I understand you have restored exactly the same tree structure in a new J: drive. Your catalog is always accessible in its original location.
    In that case it's possible to simply create a copy of your catalog (a simple copy of the folder containing the database catalog.pseXXdb - to be found in the help menu, system info). Then you need a sqlite database management tool (I use the add-on sqlite manager in Firefox) to simply edit a single record in a table containing the identification of all drives known to the catalog. You simply edit the letter and the serial number of the drive (DOS command VOL:).
    I had a case where I had a catalog and all the media on an external drive. That external drive was assigned a different letter in different computers. Either I used the above solution, or I had to reassign drive letters in one of the computers.

  • I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external?

    I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external drive?

    Good luck and you are welcome.
    Like I said, I bought one of their inexpensive enclosures and now can use the hard drive just as a source for the files that are on it...my external drives are much larger and faster so I just plug that drive in when I need something from it.
    This one is on sale for $16 http://eshop.macsales.com/item/OWC/ES2.5BPU2S/

Maybe you are looking for

  • Can you help me? Error 9 when updating

    Log file 2014-03-15 15:10:52.000 iTunes[205:707]: restore library built Jan 31 2014 at 16:40:15 2014-03-15 15:10:52.000 iTunes[205:707]: iTunes: iTunes 11.1.5 2014-03-15 15:10:52.000 iTunes[205:707]: iTunes: Software payload version: 11D167 2014-03-1

  • I need to add more RAM, what do I do and how much do I need?

    I have an imac. It is a 21" 2011, 10.8 op system  with 4 gigs of ram. It has begun to show the "colored wheel" and a few of the programs that require a lot of ram lock up. I was told I needed more RAM. Where do I buy it, what kind do I need, and how

  • C4C Integration issue XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault

    Hi All, Scenario: ECC to C4C I am getting below error while pushing message to C4C using SOAP channel with Http Protocol. SOAP channel has been configured with SSL Authentication. Regards, Mani

  • Images disappear when Flash application goes live

    My Flash 8 application works great when I test within Flash 8 and even when I test on the local browser. However, when I use it on the server it does not show the images. Could this be caused by my not referencing my image files correctly, how can I

  • Need help with distcc

    Can someone point me in the right direction on getting a working distcc setup for this layout? (I've used the terms daemon and server from the wikipage: http://wiki.archlinux.org/index.php/Distcc) Server Daemon Server x86_64 i686 Mac Mini (Intel) ubu