Event 10830 errors generated by the AD managent pack.

Hi,
I have recently installed SCOM 2012 R2 in preparation to migrate over from 2007R2.
I have only one agent installed ( a Domain cotroller) and have found the 'One or more Domain controllers may not be replicating' rule is causing Event 10830 error every 15 minutes:
An alert couldn't be inserted to the database. This could have happened because of one of the following reasons:
- Alert is stale. The alert is generated by an MP recently deleted.
- Database connectivity problems or database running out of space.
- Alert received is not valid.
The following details should help to further diagnose:
Details: RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database "OperationsManager",
table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:a811dcbc-4c5b-d9de-592b-f01e17fc0e9a. HealthServiceId:60951ca0-edc4-5a4d-be13-734dba2e4c53. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred
in database "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated..
How can this be fixed?

For error 10830, you can refer below link
http://donald-scom.blogspot.com/2011/11/my-experience-handling-event-id-10830.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Similar Messages

Error while starting the OIM managed server in oracle VM

Hi ,
I am getting the following error , while starting the OIM managed server in Oracle VM.
<Jun 14, 2012 4:45:38 AM EDT> <Error> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <MisfireHandler: Error handling misfires: Unexpected runtime exception: null
org.quartz.JobPersistenceException: Unexpected runtime exception: null [See nested exception: java.lang.NullPointerException]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3042)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
Caused By: java.lang.NullPointerException
at org.quartz.SimpleTrigger.computeNumTimesFiredBetween(SimpleTrigger.java:800)
at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigger(JobStoreSupport.java:944)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs(JobStoreSupport.java:898)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3029)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
>
How to resolve this issue.Any one please suggest me , i am in a big trouble ...
Thanks in advance ..
-Deena.

Hi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena.

JVM Initialization Error when Starting the Second Managed Server

Hi,
I am getting the below error when starting the 2nd Managed server on Solaris X86 machine.
starting weblogic with Java version:
java version "1.5.0_17"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
Java HotSpot(TM) Client VM (build 1.5.0_17-b04, mixed mode, sharing)
Starting WLS with line:
/usr/jdk/instances/jdk1.5.0/bin/java -client -Xms256m -Xmx512m -XX:CompileThre shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform .home=/beafiler/weblogic10g/bea/wlserver_10.0 -Dwls.home=/beafiler/weblogic10g/b ea/wlserver_10.0/server -Dweblogic.home=/beafiler/weblogic10g/bea/wlserver_10.0/ server -Dwli.home= -Dweblogic.management.discover=false -Dweblogic.management.s erver=http://test_admin:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false - Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/beafiler/weblogic10g/bea/patch_wss 110/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patch_w lw1021/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patc h_wls1002/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/p atch_cie640/profiles/default/sysext_manifest_classpath -Dweblogic.security.provi ders.authentication.LDAPDelegatePoolSize=50 -Dweblogic.Name=wls_test2 -Djava.sec urity.policy=/beafiler/weblogic10g/bea/wlserver_10.0/server/lib/weblogic.policy weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Can any one please help me troubleshoot this?
Edited by: user4877326 on Jul 13, 2010 1:33 PM

Hi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena.

Error communicating with the Cluster Manage Web Service

Hi,
i connected oracle database with the Endeca Studio but while uploading Departments dataset i m getting this error
"Error communicating with the Cluster Manage Web Service" so plz can anyone explain me wat is this error about.
thanks in advance

I actually ran into this myself- as Pat notes, it's hard to say without seeing log files, but I think that perhaps the default domain profile that the Endeca Server uses for domains created using Provisioning services has not been created. First see what domain profiles exist. Navigate to wherever endeca-cmd lives (e.g., user_projects/domains/endeca_server_domain/EndecaServer/bin), and use the list-dd-profile command:
-bash-3.2$ ./endeca-cmd.sh list-dd-profiles
The profiles that exist will be returned in your terminal window:
prov_dd_profile
default
If you only see 'default', then you will need to create 'prov_dd_profile'
./endeca-cmd.sh put-dd-profile prov_dd_profile
Then try uploading your file again in Studio.
Cheers,
Andrew

Error showing while adding a management pack to 2007R2 authoring console

Hi Every one,
While trying to add an unsealed management pack to 2007 authoring console we are getting error
XSD Verification failed for management pack[line: 1, "color:#222222;font-family:arial,sans-serif;font-size:13px;line-height:normal;">
system.xml.schema.xmlschemavalidationException:The schemaversion atribute is not declared
any help will be thank full
Regards,
Nikhil

The Authoring Console has not been updated and does not understand the OpsMgr 2007R2 MP Schema version. It can still be used to produce MP that will work on OpsMgr 2007 R2, but you need to reference the old versions of the libraries.
You can check this link , it will help you in your issue
http://blogs.inframon.com/post/2012/06/12/Choosing-the-correct-Management-Pack-Solution-with-Visual-Studio-Authoring-Extensions.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

The selected management pack cannot be deleted.

I'm having problems deleting a custom management pack in SCOM 2012. The error is the following:
The selected management pack cannot be deleted. This might be because it is currently being deleted or it has already been deleted. If you think this message is in error, try again later.
Any ideas?

I face the same problem in SCOM 2012 SP1
The selected management pack cannot be deleted. This might be because it is currently being deleted or it has already been deleted. If you think this message is in error, try again later.
I only have the problem with one unsealed MP.
I can delete other sealed MPs and import them again. So I hope my environment with DB is working well.
I also have deleted all overrides for this pack (in the same MP/xml because it is unsealed), restarted the DB-Server and the SCOM Management Server and also started the SCOM console with switch "/clearcache". All without success
Any idea how I can remove this MP from my SCOM environment.
Remark:
I tried the idea from AndreasZuckerhut
http://social.technet.microsoft.com/Forums/systemcenter/en-US/166c3560-c3ae-4510-8e25-1b6f1b57e3bc/unable-to-delete-mp-in-scom-2012?forum=operationsmanagermgmtpacks
created an own MP with the same ID but a newer version and started the "Import Management Pack" from the SCOM -Management GUI.
This time I got the Import-error called "The transaction log for database 'OperationsManager' is full due to 'ACTIVE_TRANSACTION'. I also see the same eventlog entry 9002 on the SQL-Server System. Could this be also an hint to
the upper problem of an failed deletion of an MP? A guide how to solve this is on
http://www.codeproject.com/Articles/380879/About-transaction-log-and-its-truncation-in-SQL-Se . But I not tried it yet whether it solves the problem. I will ask an SQL expert first and will note the result here later.

How to identify who deleted the particular management pack?

In our environment someone deleted the custom management pack. Is it possible to find who deleted that management pack?
Thanks in advance.
Regards
Karthick

Hi,
Some people askd the same feature, but it seems the answer is no:
How to track management pack changes in Management Group
http://social.technet.microsoft.com/Forums/en-US/e7fd3bcb-d9d7-4c65-953f-7311e650fb11/how-to-track-management-pack-changes-in-management-group
Regards,
Yan Li
Regards, Yan Li

SQL Permissions for the SQL Managment Pack

Hi,
Were implementing version 6.5.1.0 of the SQL 2005 2008 2012 Managment pack. Its going ok, but there is a line...
Add “SQLDefaultAction” to the dbmodule_users database role.
that makes no sense. I can't see dbmodule_users as a database role. Am i being thick?
Chris
Chris Gibson

Hi Chris,
Did you follow the SQL management pack guide downloaded here:
http://www.microsoft.com/en-us/download/details.aspx?id=10631
To configure runas account for SQL monitor, you may check the article below:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error connecting to the Exchange Management Shell - and no one can connect w/ Outlook or OWA

Whew - I'm not sure what's happening but everything blew up this morning when another admin rebooted the server...
I can't connect to the Exchange Management shell - I get this:
[<servername>.<domainname>.local] Connecting to remote server failed with the following error message : WS-Management cannot process the request. The operation failed because of an HTTP error. The HTTP error (12152) is: The server returned
an invalid or unrecognized response . For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
And in digging around, re-running the sharepoint PSConfig appeard to be a fix for a related issue I was reading about, and since there didn't seemt to be any harm in running it again (I did find the technote and had manually ran it after SP1 was installed)
I ran it and this is an excerpt from the log:
09/08/2011 16:48:05 1 INF                      Entering function Farm.Clear
09/08/2011 16:48:05 1 INF                        Entering function CentralAdminServiceInstance.Reset
09/08/2011 16:48:05 1 INF                        Leaving function CentralAdminServiceInstance.Reset
09/08/2011 16:48:05 1 INF                      Leaving function Farm.Clear
09/08/2011 16:48:05 1 INF                    Leaving function Farm.TryIsJoinedToFarm
09/08/2011 16:48:05 1 ERR                    A failure has been encountered when trying to load the Farm
09/08/2011 16:48:05 1 INF                    Entering function StringResourceManager.GetResourceString
09/08/2011 16:48:05 1 INF                      Resource id to be retrieved is FarmIsJoinedFailureWhileUsingCommandLine for language English
(United States)
09/08/2011 16:48:05 1 INF                      Resource retrieved id FarmIsJoinedFailureWhileUsingCommandLine is Failed to detect if this
server is joined to a server farm. Possible reasons for this failure could be that you no longer have the appropriate permissions to the server farm, the database server hosting the server farm is unresponsive, the configuration database is inaccessible
or this server has been removed from the server farm. To diagnose this problem further, review the extended error information located at {0}. If this problem persists, run this wizard again to disconnect from the server farm. After disconnecting,
run the wizard again to create or connect to an existing server farm.
So I seem to have some massive permissions issues. Is there any kind of a technote or walkthrough that can step me through verifying what permissions should be where? The connect to Internet Wizard won't complete complaining it can't configure
the email and to run it again. That caused the Set Up your Internet Address wizard to not run, complaining you have to run the connect to Internet wizard.

Is there any update on the issue?
No. I gave up and rebuilt the server - this time inside of HyperV!
It's definetly a problem of some sort of a problem with IIS, that much is obvious. It's frustrating, because by not being able to get to the Exchange Management Shell it made recovery of the Exchange database VERY hard.
The rest of this will be a bit of a rant so feel free to stop reading here if you like :)
I'm pretty unhappy with the fragility of recovering an Exchange databas in general - there is a VERY narrow range of parameters to get mail back - and very many things that can prevent you from recovering. Had I suspected that there would have been
1/10th the pain in recovering mail, before I tried to connect the clients to the new exchange I would have made .PST files for everyone - which would have worked since they all had cached .OST files, even if the clients couldn't talk to Exchange due to the
aformentioned IIS problems. Anyway, it was a total nightmare, extremly frustrating and while many of my problems were probalby self-induced, the total lack of a coherant disaster recovery strategy has at least motivated me to be EXTREMLY diligent about
backups - and not just backups, but ensuring that the SBS backup is working and occasionally firing up a clone VM and doing a restore to ensure the one of two ways Exchange can be successfully backed up are indeed working.
With such an extreme dependence on IIS for client acces AND managemet of Exchange, there really, REALLY needs to be more documentation on how Exchange uses IIS, how to step through the registry and other low-level internals to troubleshoot and compare.
I must have read just about every technet article and literallly hundreds of blog entries on recovering Exchange - but the lack of information about Exchange's integration and dependancies on IIS were the most frustrating of all. Talk about putting all
your eggs in one basket and a huge single point of failure ticking time bomb!
And I think it was either SharePoint Express or an accidently applied SharePoint Express update that blew up IIS. A few days after that update got applied the server was restarted, and that's when everything went completly sideways. That's whats
even more frustrating - that so many applications are so dependant on a now essential layer is frustrating. I realize SBS is an exception to the rule - generally Exchange is installed on it's own server and this isn't a remote possiblity, but any update
(or installer) that messes with IIS really needs to check the environment it's going to go into, and if there is anything at all that could possibly cause a compatibility issue, the update should "fail open" and not install wtihout explicit confirmation
from the admin that he wants to isntall it. Then again, another admin either ran the installer or approved the SP Express update so that still may not have saved me - but if he saw an explicit warning he probably would not have just clicked through
it!
Oh well - thanks for reading if you went all the way through. I'm just glad that it's now over :)

Error message when the Application Manager attempts to open.

I am using a Mac with he latest OS, and when I try to download Photoshop, the Application Manager fails to open and I get an error message. Any suggestions?

Click here and follow the instructions.
(98888)

SunCluster 3.2 - Error when accessing the SC management console

Hi,
I have a SC 3.2 with two nodes. I defined a VIP for the both nodes. When accessing to the Web GUI on the VIP, I cannot access to the Systeme Application. When the 1st node is online, the Systeme management is accessible. When switching to the other node, the Systeme application is node accessible. I have the following error : "No application available". However, when connectin with CLI. It appears that everything is OK. Could you please help me.....
I need to access to the SC application when one or the other node is active....
Thanks for your help.

When checking the /var/log/webconsole/console/console_admin_log file, I have the following error:
bash-3.00# more console_admin_log
# ============================================================
# Console configuration log created on Mon, 5 May 2008, 20:13:08
5-May-2008 | 20:13:11 | INFO | Undeployed web app context "SunClusterManager"
for application SunClusterManager
bash-3.00#
Maybe is it the cause of my problem because the file console_admin_log doesn't exist of the node where it's working....????
Thanks for your help.

T430s Error in how the Power Manager icon displays in system tray at bottom of screen

The icon for the Power Manager in the Windows system tray in the bottom right area of the screen is cut off. It's basically displaying itself too low on the system bar. Please see picture attached:
Does anyone know how to fix this? I've tried updating to the latest version of Power Manager (v 6.40) but that didn't help. I'm running Windows 7 Professional 64-bit.
Thanks.

Hi, wesaturn
Have you tried updating all other driver updates available for your system, such as the BIOS and video drivers? They can all be found here if not.
Also, how long has this been occurring? And has it ever displayed properly?
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

What is the right Management Pack XML Schema?

hi ,when i use VSAE to create a console task (there was no template to generate console task),so i use 2007 r2 authoring tool to generate the xml, then i paste the code in VSAE,but VSAE can not build the management pack , and i also tried
sample code here http://msdn.microsoft.com/en-us/library/jj130203.aspx ,VSAE can not validate the XML file
the error was:
The 'Category' attribute is not declared
The element 'ConsoleTask' has invalid child element 'Application'. List of possible elements expected: 'Criteria, Assembly'.
The 'Category' attribute is not declared
the project was operation manager 2007 r2 management pack.
I find the XML schema in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Xml\Schemas\SystemCenter\FragmentSchemaOM10.xsd' was defferent from the one here 'C:\Program Files\System Center MP Authoring Console
2007\MP Schema\ManagementPackSchema.xsd' ,
the ConsoleTask which defined in the schema of 2007 r2 authoring tool was:
The ConsoleTask which defined in the schema of in VSAE:
So , is this a bug? or which schema was the right one ?
yoke88
IM：[email protected]

I've run into a similar problem with reporting in the past - I asked the question here, but don't have a thread id for you. The answer I received from the VSAE developer was
basically, VSAE automatically performs a conversion to schema 2.0 during build time, and if it is actually version 1.0 that you are working with you may (will) receive validation errors.
This doesn't help you much, but my solution was to write the pack using version 2.0 schema requirements, regardless if it was for SCOM 2007 or 2012...
Is it a bug??? In my opinion, it is a design flaw.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

SCOM 2012/SP1/R2 - What Is the Best Management Pack for HP Storage (P2000)

Hi all!
What would be the best recommended Management Pack for HP Storage (P2000) for the SCOM 2012/SP1/R2? Free products are privileged, of course, but we would also consider the paid ones.
Thank you very much for your time and attention!
Best regards!

Hi,
Recently I created Custom Management pack for MSA P2000 Storage. Its primary purpose is to monitor performance.
See: http://jurelab.wordpress.com/ for details.
Hope it helps
Jure

Error While Starting the Weblogic Managed server- BEA-160001

Hi,
While starting the managed server (10.3.4) below exception occurs. Help me on why the error occurs.
<Error> <J2EE> <BEA-160001> <Error deploying Internal Application: weblogic.application.ModuleException: [HTTP:101216]Servlet: "CoordinatorPortTypeServlethttp" failed to preload on startup in Web application: "wls-wsat.war".
java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
Caused by: java.lang.IllegalArgumentException: com.sun.xml.messaging.saaj.soap.LocalStrings != com.sun.xml.internal.messaging.saaj.soap.LocalStrings
     at java.util.logging.Logger.getLogger(Logger.java:314)
     at com.sun.xml.internal.messaging.saaj.soap.SAAJMetaFactoryImpl.<clinit>(SAAJMetaFactoryImpl.java:41)
.

Hi,
There are two workaround for this issue.
1) Without disabling wls-wsat application:
Here are the steps:
Add jar saaj-impl-1.3.jar to weblogic classpath
Start weblogic using java options:
-Djavax.xml.soap.MessageFactory=com.sun.xml.messaging.saaj.soap.MessageFactoryImpl
-Djavax.xml.soap.SOAPFactory=com.sun.xml.messaging.saaj.soap.SOAPFactoryImpl
-Djavax.xml.soap.MetaFactory=com.sun.xml.messaging.saaj.soap.SAAJMetaFactoryImpl
2) If wls-wsat is not required:
This is the setting to disable wls-wsat:
-Dweblogic.wsee.wstx.wsat.deployed=false
It is mentioned here in the doc
http://docs.oracle.com/cd/E21764_01/web.1111/e13734/cluster.htm
Regards,
Kal

Event 10830 errors generated by the AD managent pack.

Similar Messages

Maybe you are looking for