Event 123 - The DSM service was delayed by nn seconds for a driver query/download/install on device then screen freezes
The reader's digest version of the saga is I received a Dell Vostro 460 with a wiped disk. The PC emitted beep code indicating PSU or RAM issue when turned on. After resolving the marginal power supply with a new replacement, I installed Windows 7
but as soon as I would launch IE the system would freeze. All of the BIOS & device drivers are current. I tried upgrading to Windows 8 but kept getting the black screen right after the install process finished installing the devices. I had
to resort to a clean install. Having successfully install Windows 8.1 I have been able to a get to the desktop, however every time I launched IE my system freezes in the same way as with Windows 7. I installed a different browser and used that
to research the event log errors. As the system freezes, I see warning log entries with event id 123 entries:
Event 123 - The DSM service was delayed by 125 seconds for a driver query/download/install on device 'ACPI\GENUINEINTEL_-_INTEL64_FAMILY_6_MODEL_42_-_________INTEL(R)_CORE(TM)_I7-2600_CPU_@_3.40GHZ\_8'
Event 123 - The DSM service was delayed by 517 seconds for a driver query/download/install on device 'PCI\VEN_8086&DEV_1C3A&SUBSYS_04AB1028&REV_04\3&11583659&0&B0'
Event 123 - The DSM service was delayed by 106 seconds for a driver query/download/install on device 'PCI\VEN_8086&DEV_0100&SUBSYS_04AB1028&REV_09\3&11583659&0&00'
Event 123 - The DSM service was delayed by 155 seconds for a driver query/download/install on device 'PCI\VEN_10DE&DEV_0423&SUBSYS_049410DE&REV_A1\4&2209AF9F&0&0008'
There are more but these warnings are stacked in groups of two or three then the error & critical entries indicating I did a hard reboot.
When I use Firefox browser to open several tabs everything is fine until I stream audio/video then the same freeze screen happens and i have to reboot. Anything you can offer will be very much appreciated.
Hi,
'PCI\VEN_10DE&DEV_0423 is a graphic card driver from the vendor’s official webpage.
Besides as you mentioned in the post, it happened when you launch Internet Explorer, there is an accelerated Graphics item in the Internet Explorer, the settings should be changed, please follow this way:
Go to the control panel, then select the Internet Option, go to advance, just like the screenshot below:
select the checkbox if it is empty, anyhow make it different from the previous settings, then restart your computer to see the result.
Wade Liu
Similar Messages
-
I'm getting these errors in the eventlog and ULS, "An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root
Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS CERTIFICATE THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate."
The errors point to the SharePoint Security Token Service as the issue ("The revocation function was unable to check revocation for the certificate") reported back by the Topology service. This is apparent when executing a search, accessing
the managed metadata service, issuing SPSite commands in Powershell, or anything that needs to run through the "SharePoint Web Services" site. I've looked at the certificate assigned to that site and everything appears to be in order.
It would seem to me to be either an incorrect endpoint configuration (internally cached perhaps?) or related to security access for the configuration database (in order to validate the certificate root).
What I’ve tried so far:
I’ve been all over the certificate settings, both in the server store, and within SharePoint Token Service config. Both appear to be configured correctly such that the root CAs can be validated.
Re-entered the passwords for the application pool domain accounts to eliminate these as a potential cause. I’ve also verified the service accounts reporting the error, do have access to the configuration database.
Re-provisioned the STS service to see if that might clear out any cached issues and validated everything else according to this
MS Tech note.
So far nothing has worked. Is there anything else I could be looking at that I've missed? (Full eventlog detail below)
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 2/20/2015 11:19:41 AM
Event ID: 8311
Task Category: Topology
Level: Error
Keywords:
User: <SP SERVICE ACCOUNT>
Computer: <SHAREPOINTSERVER>
Description:
An operation failed because the following certificate has validation errors:\n\nSubject Name: CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US\nIssuer Name: CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US\nThumbprint: <STS
CERT THUMBPRINT>\n\nErrors:\n\n RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>8311</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>13</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-02-20T17:19:41.213852500Z" />
<EventRecordID>1611121</EventRecordID>
<Correlation />
<Execution ProcessID="10212" ThreadID="10328" />
<Channel>Application</Channel>
<Computer><SHAREPOINTSERVER></Computer>
<Security UserID="<SP SERVICE ACCOUNT>" />
</System>
<EventData>
<Data Name="string0">CN=SharePoint Security Token Service, OU=SharePoint, O=Microsoft, C=US</Data>
<Data Name="string1">CN=SharePoint Root Authority, OU=SharePoint, O=Microsoft, C=US</Data>
<Data Name="string2"><STS CERT THUMBPRINT></Data>
<Data Name="string3">RevocationStatusUnknown: The revocation function was unable to check revocation for the certificate.
</Data>
</EventData>
</Event>Hi Darren,
This problem seems to occur when an administrator deletes the local trust relationship of the farm from the Security section of the Central Administration website
In order to resolve this problem, the local trust relationship has to be created. This can be done by running the following PowerShell commands
$rootCert = (Get-SPCertificateAuthority).RootCertificate
New-SPTrustedRootAuthority -Name "localNew" -Certificate $rootCert
After running the above commands, perform an IISReset on all servers in the farm.
More information:
http://support.microsoft.com/kb/2545744
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!
Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??
-
The "SignFile" task was not given a value for the required parameter "CertificateThumbprint"
We have a line of business app which is deployed via clickonce. I can build and publish the application without any problems but when I try to use Continuous Integration (Build each check-in) I get the following error:
2>C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5):
error MSB4044:
The "SignFile" task was not given a value for the required parameter "CertificateThumbprint".
[C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
Done executing task "SignFile" -- FAILED.
We sign the application (to be more specific: the ClickOnce manifest) using a code signing certificate which is registered in the AD as Trusted Publisher.
The Certificate is stored in Certificate store on my local workstation. The Certificate is also in the certificate store of the build server (1. In the Personal Store, 2. in the Personal store of the TFSBuildServiceHost Service Account and 3. in the Personal
store of the tfs/build server itself).
Where are using Visual Studio 2013 Update 4, C#, .Net 4.5 and TFS 2013 Update 4.
I have no clue what causes this error, any help is appreciated.I installed the
Windows Software Development Kit (SDK) for Windows 8 and now I can build the solution via command line.
"C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe" C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln
"C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe" C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln
But the TFS Build still fails.
Here is the error output gathered from the tfsbuild logfile:
Task "AL"
C:\Program Files (x86)\Microsoft SDKs\Windows\v8.1A\bin\NETFX 4.5.1 Tools\x64\AL.exe /culture:de /out:obj\Debug\de\Pulse.resources.dll /platform:AnyCPU /template:obj\Debug\Pulse.exe /embed:obj\Debug\Pulse.View.Localization.CreditsView.de.resources /embed:obj\Debug\Pulse.View.Localization.PulseMainWindow.de.resources
Microsoft (R) Assembly Linker version 12.0.20806.33440
Copyright (C) Microsoft Corporation. All rights reserved.
Done executing task "AL".
2>Done building target "GenerateSatelliteAssemblies" in project "Pulse.csproj".
2>Target "CreateSatelliteAssemblies" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "CoreBuild" depends on it):
2>Done building target "CreateSatelliteAssemblies" in project "Pulse.csproj".
Target "SetWin32ManifestProperties" skipped. Previously built successfully.
Target "_DeploymentComputeNativeManifestInfo" skipped, due to false condition; ('$(GenerateClickOnceManifests)'!='true') was evaluated as ('true'!='true').
2>Target "CleanPublishFolder" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_DeploymentComputeClickOnceManifestInfo" depends on it):
Task "RemoveDir" skipped, due to false condition; ('$(PublishDir)'=='$(OutputPath)app.publish\' and Exists('$(PublishDir)')) was evaluated as ('bin\Debug\app.publish\'=='bin\Debug\app.publish\' and Exists('bin\Debug\app.publish\')).
2>Done building target "CleanPublishFolder" in project "Pulse.csproj".
Target "_DeploymentGenerateTrustInfo" skipped, due to false condition; ('$(TargetZone)'!='') was evaluated as (''!='').
2>Target "_DeploymentComputeClickOnceManifestInfo" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "GenerateApplicationManifest" depends on it):
Task "Copy"
Creating directory "bin\Debug\app.publish".
Copying file from "obj\Debug\Pulse.exe" to "bin\Debug\app.publish\Pulse.exe".
Done executing task "Copy".
Using "SignFile" task from assembly "Microsoft.Build.Tasks.v12.0, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a".
Task "SignFile"
2>C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5): error MSB4044: The "SignFile" task was not given a value for the required parameter "CertificateThumbprint". [C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
Done executing task "SignFile" -- FAILED.
2>Done building target "_DeploymentComputeClickOnceManifestInfo" in project "Pulse.csproj" -- FAILED.
2>Target "_CheckForCompileOutputs" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_CleanGetCurrentAndPriorFileWrites" depends on it):
2>Done building target "_CheckForCompileOutputs" in project "Pulse.csproj".
Target "_SGenCheckForOutputs" skipped, due to false condition; ('$(_SGenGenerateSerializationAssembliesConfig)' == 'On' or ('@(WebReferenceUrl)'!='' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto')) was evaluated as ('Off' == 'On' or (''!='' and 'Off' == 'Auto')).
2>Target "_CleanGetCurrentAndPriorFileWrites" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_CleanRecordFileWrites" depends on it):
Task "ReadLinesFromFile"
Done executing task "ReadLinesFromFile".
Task "ConvertToAbsolutePath"
Done executing task "ConvertToAbsolutePath".
Task "FindUnderPath"
Comparison path is "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse".
Done executing task "FindUnderPath".
Task "FindUnderPath"
Comparison path is "C:\Builds\1\Pulse\DefaultBuild\bin\".
Done executing task "FindUnderPath".
Task "FindUnderPath"
Comparison path is "obj\Debug\".
Done executing task "FindUnderPath".
Task "RemoveDuplicates"
Done executing task "RemoveDuplicates".
2>Done building target "_CleanGetCurrentAndPriorFileWrites" in project "Pulse.csproj".
2>Target "_CleanRecordFileWrites" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "CoreBuild" depends on it):
Task "RemoveDuplicates"
Done executing task "RemoveDuplicates".
Task "MakeDir"
Done executing task "MakeDir".
Task "WriteLinesToFile"
Done executing task "WriteLinesToFile".
2>Done building target "_CleanRecordFileWrites" in project "Pulse.csproj".
2>Done Building Project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (default targets) -- FAILED.
1>Done executing task "MSBuild" -- FAILED.
1>Done building target "Build" in project "Pulse.sln" -- FAILED.
1>Done Building Project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln" (default targets) -- FAILED.
Build FAILED.
"C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln" (default target) (1) ->
"C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (default target) (2) ->
(_DeploymentComputeClickOnceManifestInfo target) ->
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5): error MSB4044: The "SignFile" task was not given a value for the required parameter "CertificateThumbprint". [C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
0 Warning(s)
1 Error(s) -
I lost my phone and the location service is off. Is it possible to turn it on from another device?
I lost my phone and the location service is off. Is it possible to turn it on from another device?
No.
-
I just bought an iPod touch 4th generation 8GB for $199.99 but then when the iPod touch 5th generation came out, the 4th generation was still $199.99, but for a whole 16GB. Is there a way I can get some sort of free space?
If "just" is less than 14 days, you can return your iPod to Apple for a full refund.
-
Hello mr/ms,i have one problem tu ask for u,i purchase one app in app stre,but the app not install my device then my credit in my account have lost.
This is a user to user forum, so no one here can help you
Perhaps iTunes support
http://www.apple.com/support/itunes/contact/ -
Hello- My laptop needs the OS X recovery run. Can I download the software directly to a thumb drive without affecting my desktop unit? The Geek Squad said they need to wipe my hard drive and re-install the operating system. Thanks.
They already damaged you Mac by fooling with the BootCamp partition without knowing what they were doing. I wouldn't suggest haveing them help you do anything.
Here is the article that describes the Recovery HD: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
First, see if you can boot into the Recovery HD. Restart and hold down cmd-r until you see the gray screen. It should boot into Recovery. If your Mac shipped with Lion or Mountain Lion, it will boot into Internet Recovery if it cannot boot into the Recovery HD on the hard drive.
They should have tried this at the store. -
What is the other category on my mac book pro for hard drive space on how do I improve on it
What is the "other" category on my mac book pro for hard drive space? I found out that it is taking a whole lot of my computer's space...how do I find what it is and optimize it?
If you need to remove files for space see The XLab FAQs and read the FAQ on freeing space on your hard drive. Also see Freeing space on your Mac OS X startup disk.
Under no circumstances should you try deleting files outside of your Home folder. -
Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?
Many users have solved the problem by syncing several times; and if that doesn't work, perform a simple restore. Your titles will come back.
-
Event 7024 The DPMRA service terminated with the following service-specific error:
Hi
I am getting a DPMRA error on an Exchange 2013 Server.
Event 7024, Service Control Manager
The DPMRA service terminated with the following service-specific error:
An attempt was made to access a socket in a way forbidden by its access permissions.
I think I have fixed the issue by uninstalling the DPM Agent and reinstalling it. It now needs a restart (I will do this after hours)
Is there a better way of fixing an issue like this?Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com -
I have my Imac set with 4 user IDs. I do not have any problems logging in with three of the user IDs, but when I try to log in under my ID which is the Admin ID the screen freezes once I log in and I cannot close or open any thing. It begins by trying to open Skype and Messenger...then it gets frozen and I cannot close either or cancel and nothing works. What can I do or what it is the problem? HELP!!!
This next part is relatively advanced.
If you are not comfortable following these steps on your own you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
As you don't have any other Admin accounts we will have to work from another account:
Start from your Mac OS X 10.6 Install DVD.
From the Utilities menu, choose Reset Password.
Follow the onscreen instructions to reset the root password (the root account is not the same as your account). Specifically: Select the name of the drive that Mac OS X is installed on, select the user named "System Administrator (root)" from the pop-up menu, type the password in the first field, re-enter the password in the second field, then click the Save button.
Quit the reset password utility
Quit the installer
Click "Startup Disk"
Choose your Macintosh HD and restart
At startup click on "Other" and login using the name "root" and the password you choose in step 3.
Once logged in as the root user go to Macintosh HD > Users > Your User Account > Library -- Rename "Library" to "Library old"
Restart the computer and login to your Admin account and see if you still get the spinning wheel.NOTE: Do not open the Mail program as renaming the Library has temporarily removed your settings. Your dock and desktop pattern will look different.
Once logged back in to your user, see if the items that were missing from your desktop have returned. Also check in iPhoto to see if your pictures are there (assuming you use iPhoto). Check iTunes to see if your music is there (when you open iTunes it will ask you if you want to search for music on your computer…say no for now).
Let me know the results before we proceed. -
Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
- I've used Firefox exclusively for around 2 years.
- My outlook express has no problems
- other programs seem unaffected; it seems peculiar to Firefox.
- my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
- every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.Sounds like something is keeping Firefox from closing properly. See this: <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
how to i recover this space
Michael Allbritton wrote:
Yes, folks have gotten refunds even though the TOS says all sales are final. You'll need to contact iTunes Store support and politely make your case that you're just not satisfied with the service.
I've got kind of a radical suggestion, if you want to try it. In cases like you describe a full OS restore, then setting the iPhone up as a new device can fix all these little glitches. It is a lot of trouble, I know, but if you do want to use the service this is one method that should clear it all up for you.
Thank you, it's good to know that Apple does offer refunds. I want it to work, if it does what I would like the $25 would be more than worth it.
I thought clearing my music and starting up iTunes Match with an empty music library might do the equivalent of a full reset... I can't say I really feel like doing that, and I'm skeptical it would clear up all of the issues I've had (play counts, play lists, album art, data usage when I told it to bloody well not use the data).
Thanks for the input! -
İ bought smurfberies with my iPad but i want to refund it.What can i do?
Contact the app developer.
Maybe you are looking for
-
Since I live in three diffirent countries and I have 3 Apple ID accounts on my iPhone 4S. Recently I bought a MacBook Pro with Mountain Lion installed. I am not sure that when I connect my iPhone with a new MacBook all my data (apps, music, podcasts,
-
have navigation/phone in accord 2014 with MAP MAS-iOS, phone is apple 7.0.4, cannot return prerecorded messages to sender wheather vehicle is moving or stopped?? help, thanks in advance
-
Installing Itunes 6 for Windows
Hi, I just upgraded to Itunes 6, and now, even though it shows on my desktop Itunes-it won't open...The Icon is there, but now nothing happens when I open it. Then, after uninstalling and reinstalling about 8 times, I now get an "Error Report" when I
-
Keep grid scroll position across updates?
I have a JBoss app server status monitor that uses the XML status page to update a Flex grid control. I can scroll down in the list, but when the grid auto-updates, it puts the scroll position back at the top of the grid. This is very inconvenient fo
-
Qs: To call or use a foreign function from a dll file from forms, using the foreign function PL/SQL interface and ORA_FFI pachage, does the function's language, the code its written in, have to be standard C language, or can the dll and its functions