Event 2000. hpsa_servi​ce.exe

HP Error ID: -2146233088   at HP.ActiveCheckLocalMode.SessionManager.ActiveCheck​Manager.InitRegItem()
   at HP.ActiveCheckLocalMode.SessionManager.ActiveCheck​Manager..ctor()
   at HP.SupportFramework.Service.ACLM.AssetAgent.Execut​eAssetAgent(Boolean isFirst)
Message: HPAsset has not been installed, ACLM will depend on this component.
StackTrace:   at HP.ActiveCheckLocalMode.SessionManager.ActiveCheck​Manager.InitRegItem()
   at HP.ActiveCheckLocalMode.SessionManager.ActiveCheck​Manager..ctor()
   at HP.SupportFramework.Service.ACLM.AssetAgent.Execut​eAssetAgent(Boolean isFirst)
Source: HP.ActiveCheckLocalMode.SessionManager
Name: hpsa_service.exe
Version: 07.00.00.01
Path: C:\Program Files (x86)\Hewlett-Packard\HP Support Framework\hpsa_service.exe
Format: en-US
RAM: 3979
Ram Utilization: 20
TargetSite: Void InitRegItem()
This question was solved.
View Solution.

Please uninstall the existing HP Support Assistant and download & install the latest one from the following weblink:
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp5891​9.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

  • Problem Event :APPCRASH=Application:iTunes.exe=Fault Module QuickTime.qts

    Dear Friends,
    When i usb-connect my iphone to computer, i-tunes opens and says "ITUNES HAS STOPPED WORKING" and it shuts down.
    If any body faced this problem, Please advice me how to connect to itunes, i cannot upload or download anything from iphone. iam stuck with this.
    this started happening after I-tunes got updated.
    I HAD UN-INSTALLED AND RE-INSTALLED ITUNES,QUICKTIME COUPLE OF TIMES, STILL SAME ERROR.
    please see below the details of this errors
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 8.0.2.20
    Application Timestamp: 4925c4fe
    Fault Module Name: QuickTime.qts
    Fault Module Version: 7.60.92.0
    Fault Module Timestamp: 49628b19
    Exception Code: c0000005
    Exception Offset: 00a02227
    OS Version: 6.0.6000.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 720c
    Additional Information 2: 87abfdde4e44868a2d32f6948e899598
    Additional Information 3: f90e
    Additional Information 4: 9e28fae53134737dc3d52f78b3058022
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    same error on windows-xp and vista.
    it used to work fine before the itunes updates.
    Thankyou.
    Shankar

    I had this same problem, and to solve it I had to remove iTunes and revert back to older version. Also, when you do this, you have to remove the iTunes Library.ilt file or else you will get an error message saying it was created with a newer version of iTunes. So what I'm trying to say is don't install the iTunes 8.1 update just yet.

  • Event Source: Application Error Event ID: 1000 (F1Server.exe)

    Hi.
    We regulary have an Application Error with "faulting module ntdll.dll" (see below).
    And we can't find what is the problem.
    Can you help us? 
    Windows Server 2003 R2 Eneterprise Edition Service Pack 2
    [boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Enterprise" /noexecute=AlwaysOff /fastdetect /PAE /3Gb
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1000
    Date: 1/11/2014
    Time: 10:33:47 PM
    User: N/A
    Computer: MS-GARANT001
    Description:
    Faulting application F1Server.exe, version 7.9.0.0, faulting module ntdll.dll, version 5.2.3790.4937, fault address 0x00060c17.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 46 31 53   ure  F1S
    0018: 65 72 76 65 72 2e 65 78   erver.ex
    0020: 65 20 37 2e 39 2e 30 2e   e 7.9.0.
    0028: 30 20 69 6e 20 6e 74 64   0 in ntd
    0030: 6c 6c 2e 64 6c 6c 20 35   ll.dll 5
    0038: 2e 32 2e 33 37 39 30 2e   .2.3790.
    0040: 34 39 33 37 20 61 74 20   4937 at 
    0048: 6f 66 66 73 65 74 20 30   offset 0
    0050: 30 30 36 30 63 31 37      0060c17 

    Hi,
    This issue may be caused by corrupted files or application conflicts. I recommend you to run "sfc /scannow" at the command prompt to check the system files. In addition, you can perform a clean boot to see if any service is causing the issue.
    If the above cannot solve it, maybe you can find if there is any hotfix for the application or uninstall the application.
    Best regards,
    Susie

  • Problem Event Name:_APPCRASH osk.exe(on screen keyboard)

    Hi there everyone.Anyone out there can help me with this problem? Many thanks in advance. :)
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: osk.exe
      Application Version: 6.3.9600.17031
      Application Timestamp: 53087e42
      Fault Module Name: msvcrt.dll
    Fault Module Version: 7.0.9600.16384
      Fault Module Timestamp: 5215f944
      Exception Code: c0000005
      Exception Offset: 00000000000019c7
      OS Version: 6.3.9600.2.0.0.256.48
      Locale ID: 17417
      Additional Information 1: 6253
      Additional Information 2: 6253d17d50c5d8c4e4b3d3fabca46373
      Additional Information 3: 0fba
      Additional Information 4: 0fba811312e5e0ff4163312d8eac3fa7
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-GB\erofflps.txt

    This web site is for helping visitors in writing software. I don't think you can fix the crash by writing software unless you work for Microsoft.
    If you need help in using Windows, visit answers.microsoft.com. 
    Visual C++ MVP

  • Event ID 1000, Explorer.exe, Crashes

    Explorer.exe crashes from time to time. The crash seems random, but I think it happens when I open explorer or the control panel. It happens intermittently, so it's hard to tell. I get two different event ID 1000 in the logs. One error indicates the
    faulting module as ntdll.dll and the other as DUI70.dll. Here's a link to the dump files:
    http://1drv.ms/1yScTvQ I don't know how to analyze the dump files. Please help me, thank you! System Information:
    http://1drv.ms/15puFOb
    "Log Name:      Application
    Source:        Application Error
    Date:          11/22/2014 2:53:40 PM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      COMPUTER
    Description:
    Faulting application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
    Faulting module name: DUI70.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdf25
    Exception code: 0xc0000005
    Fault offset: 0x0000000000001098
    Faulting process id: 0x6d4
    Faulting application start time: 0x01d0069509c3cb8f
    Faulting application path: C:\Windows\Explorer.EXE
    Faulting module path: C:\Windows\system32\DUI70.dll
    Report Id: a3068706-7289-11e4-bfb8-6c626d45a41"
    "Log Name:      Application
    Source:        Application Error
    Date:          11/25/2014 7:54:57 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      COMPUTER
    Description:
    Faulting application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
    Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
    Exception code: 0xc0000374
    Fault offset: 0x00000000000c4102
    Faulting process id: 0x70c
    Faulting application start time: 0x01d008b520e84613
    Faulting application path: C:\Windows\Explorer.EXE
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: a38d81ec-74aa-11e4-9900-6c626d45a415"

    Another crash . . .this time I believe it was the Windows DirectUser Engine(duser.dll). Now, I'm not sure how to troubleshoot this further. Here is the last crash dump:
    FAULTING_IP:
    +1
    00000000`00000000 ??              ???
    EXCEPTION_RECORD:  ffffffffffffffff -- (.exr 0xffffffffffffffff)
    ExceptionAddress: 0000000000000000
       ExceptionCode: c0000005 (Access violation)
      ExceptionFlags: 00000000
    NumberParameters: 2
       Parameter[0]: 0000000000000008
       Parameter[1]: 0000000000000000
    Attempt to execute non-executable address 0000000000000000
    CONTEXT:  0000000000000000 -- (.cxr 0x0;r)
    rax=00000000c0000001 rbx=00000000059bd350 rcx=00000000044a0000
    rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000002
    rip=0000000077b4186a rsp=00000000059bd218 rbp=0000000000000002
     r8=00000000059bc938  r9=00000000059bcaa0 r10=0000000000000000
    r11=0000000000000246 r12=0000000000000000 r13=00000000059bd2c0
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl zr na po nc
    cs=0033  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00000246
    ntdll!NtWaitForMultipleObjects+0xa:
    00000000`77b4186a c3              ret
    PROCESS_NAME:  explorer.exe
    ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    EXCEPTION_PARAMETER1:  0000000000000008
    EXCEPTION_PARAMETER2:  0000000000000000
    WRITE_ADDRESS:  0000000000000000
    FOLLOWUP_IP:
    duser!GPCB::xwInvokeDirect+67
    000007fe`fbc81df7 448be8          mov     r13d,eax
    FAILED_INSTRUCTION_ADDRESS:
    +67
    00000000`00000000 ??              ???
    NTGLOBALFLAG:  0
    APPLICATION_VERIFIER_FLAGS:  0
    APP:  explorer.exe
    ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
    FAULTING_THREAD:  00000000000012c8
    BUGCHECK_STR:  APPLICATION_FAULT_SOFTWARE_NX_FAULT_NULL
    PRIMARY_PROBLEM_CLASS:  SOFTWARE_NX_FAULT_NULL
    DEFAULT_BUCKET_ID:  SOFTWARE_NX_FAULT_NULL
    LAST_CONTROL_TRANSFER:  from 000007fefbc81df7 to 0000000000000000
    STACK_TEXT: 
    00000000`059be398 000007fe`fbc81df7 : 00000000`06b84db0 00000000`00000000 00000000`00040001 00000bee`b6e64c36 : 0x0
    00000000`059be3a0 000007fe`fbc88c02 : 00000000`059be518 00000000`06cb6da0 00000000`059be4a0 00000000`059be410 : duser!GPCB::xwInvokeDirect+0x67
    00000000`059be450 000007fe`fbc88d56 : 00000000`06b84c70 00000000`059be9c8 000001b1`000000f3 00000000`00000000 : duser!DuVisual::xrDrawCore+0x1b1
    00000000`059be4f0 000007fe`fbc88dab : 000001b1`000000f3 00000000`06b84c70 000001b1`000000f3 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x107
    00000000`059be550 000007fe`fbc88dab : 000001b1`000000f3 00000000`06b84e50 0000019e`00000072 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be5b0 000007fe`fbc88dab : 0000019e`00000072 00000000`06b858f0 00000189`0000004e 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be610 000007fe`fbc88dab : 00000189`0000004e 00000000`06b85cb0 00000000`0000003f 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be670 000007fe`fbc88dab : 00000000`0000003f 00000000`06b8cb30 00000000`0000003f 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be6d0 000007fe`fbc88dab : 00000000`0000003f 00000000`06b8c8b0 00000000`0000003f 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be730 000007fe`fbc88dab : 00000000`0000003f 00000000`06b8c770 00000000`0000003f 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be790 000007fe`fbc88dab : 00000000`0000003f 00000000`06b8b790 00000000`0000003f 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be7f0 000007fe`fbc88dab : 00000000`0000003f 00000000`06b8b830 00000000`0000003f 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be850 000007fe`fbc88dab : 00000000`0000003f 00000000`06b90190 00000000`0000003f 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be8b0 000007fe`fbc88c5d : 00000000`0000003f 00000000`00000000 00000000`00000000 00000000`00000000 : duser!DuVisual::xrDrawTrivial+0x151
    00000000`059be910 000007fe`fbc89703 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : duser!DuVisual::xrDrawFull+0x929
    00000000`059beac0 000007fe`fbc890d0 : 00000000`00000000 00000000`00000000 00000000`00000001 00000000`00000000 : duser!DuVisual::xrDrawFull+0x97d
    00000000`059bec70 000007fe`fbc88ff7 : 00000000`00000000 00000000`2a010c48 00000000`00000000 00000000`00000000 : duser!DuVisual::xrDrawStart+0x58
    00000000`059beca0 000007fe`fbc88aa7 : 00000000`00000001 00000000`06befa60 00000000`2a010c48 00000000`00000009 : duser!DuRootGadget::xrDrawTree+0x51c
    00000000`059bee80 000007fe`fbc81859 : 00000000`00000000 00000000`00000000 000004b0`00000000 00000000`00000000 : duser!HWndContainer::xdHandleMessage+0x2b4
    00000000`059bf180 00000000`77a08971 : 00000000`00000000 00000000`03d430e0 00000000`00000001 00000000`059bf238 : duser!ExtraInfoWndProc+0x8b
    00000000`059bf1e0 00000000`77a072cb : 00000000`00000000 000007fe`fbc817e4 00000000`00000000 00000000`00000000 : user32!UserCallWinProcCheckWow+0x163
    00000000`059bf2a0 00000000`77a06829 : 00000000`00000000 00000000`77a0919b 00000000`00000000 00000000`00000001 : user32!DispatchClientMessage+0xc3
    00000000`059bf300 00000000`77b411f5 : 00000000`0000000f 00000000`00000000 00000000`00000000 000001e9`000bab7a : user32!_fnDWORD+0x2d
    00000000`059bf360 00000000`77a06e5a : 00000000`77a06e6c 000007fe`f85eb550 00000000`77a0791a 00000000`03d43004 : ntdll!KiUserCallbackDispatcherContinue
    00000000`059bf3e8 00000000`77a06e6c : 000007fe`f85eb550 00000000`77a0791a 00000000`03d43004 00000000`03d430e0 : user32!NtUserDispatchMessage+0xa
    00000000`059bf3f0 000007fe`f84b04b0 : 00000000`03d43004 00000000`03d43004 000007fe`fbc817e4 00000000`00000000 : user32!DispatchMessageWorker+0x55b
    00000000`059bf470 000007fe`f84b4925 : 00000000`03d430e0 00000000`00000002 00000000`00000000 00000000`00000000 : EXPLORERFRAME!CExplorerFrame::FrameMessagePump+0x436
    00000000`059bf4f0 000007fe`f84b509b : 00000000`03d430e0 00000000`03cc8540 00000000`00000000 00000000`00000000 : EXPLORERFRAME!BrowserThreadProc+0x180
    00000000`059bf570 000007fe`f84b5032 : 100ba44a`00000001 00000000`03c97cd0 00000000`7fffffff 000007fe`fd8f2d40 : EXPLORERFRAME!BrowserNewThreadProc+0x53
    00000000`059bf5a0 000007fe`f84abe50 : 00000000`03c97bb0 00000000`03c9ffa0 00000000`00000000 000007fe`fe0bf07c : EXPLORERFRAME!CExplorerTask::InternalResumeRT+0x12
    00000000`059bf5d0 000007fe`fe0befcb : 80000000`01000000 00000000`059bf660 00000000`03c97bb0 00000000`0000000a : EXPLORERFRAME!CRunnableTask::Run+0xda
    00000000`059bf600 000007fe`fe0c2b56 : 00000000`03c97bb0 00000000`00000000 00000000`03c97bb0 00000000`00000002 : shell32!CShellTask::TT_Run+0x124
    00000000`059bf630 000007fe`fe0c2cb2 : 00000000`03d6ec20 00000000`03d6ec20 00000000`00000000 00000000`00000010 : shell32!CShellTaskThread::ThreadProc+0x1d2
    00000000`059bf6d0 000007fe`fedbc71e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : shell32!CShellTaskThread::s_ThreadProc+0x22
    00000000`059bf700 00000000`778e59ed : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : shlwapi!WrapperThreadProc+0x19b
    00000000`059bf800 00000000`77b1c541 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0xd
    00000000`059bf830 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x1d
    SYMBOL_STACK_INDEX:  1
    SYMBOL_NAME:  duser!GPCB::xwInvokeDirect+67
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: duser
    IMAGE_NAME:  duser.dll
    DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bdf26
    STACK_COMMAND:  ~31s; .ecxr ; kb
    FAILURE_BUCKET_ID:  SOFTWARE_NX_FAULT_NULL_c0000005_duser.dll!GPCB::xwInvokeDirect
    BUCKET_ID:  X64_APPLICATION_FAULT_SOFTWARE_NX_FAULT_NULL_NULL_IP_duser!GPCB::xwInvokeDirect+67
    ANALYSIS_SOURCE:  UM
    FAILURE_ID_HASH_STRING:  um:software_nx_fault_null_c0000005_duser.dll!gpcb::xwinvokedirect
    FAILURE_ID_HASH:  {bc29cea9-f7e5-ba9f-c14c-7ccc77c4be36}
    Followup: MachineOwner

  • Does anyone know how to capture a menu event on a existing EXE program?

    I have figured out how to add menu Item to an existing EXE program, but I have not yet been able to figure out how to capture there events.  Any help would be greatly appreciated.

    "[email protected]" <[email protected]> wrote in message news:[email protected]..
    I have figured out how to add menu Item to an existing EXE program, but I have not yet been able to figure out how to capture there events.&nbsp; Any help would be greatly appreciated.
    It's not entirely clear what you are trying to acieve. I think you're trying to add menu items to an exsisting exe without recompiling it, from LabVIEW. If so the following applies.
    You have to hook the winproc. When a menu item is selected, windows send a message to the window's winproc. There are some API's that can be used to point the address of the winproc to another routine. This routine can do filtering, and then call the original routine.
    Note that LabVIEW doesn't (or didn't until LV7) use windows menu's, so when a LabVIEW (or exe created with LabVIEW) menu item is called, windows will not send anything. That is the price for platform independency.
    I think the OpenG site (or perhaps Winutils from NI) has some vi's to hook windows messages that are send to LabVIEW. Perhaps you can also use them hook another application.
    Regards,
    Wiebe.

  • Event ID 1022 msexchangeFDS.exe

    Good Day ,
    I did migration from exchange 2003 to exchange 2010 everything work fine but I saw this event appear :
    The Event 1022 msexchangeFDS.exe
    Can you help me
    Regards
    Zakaria
    e

    Thank you
    I found the tree folders from the begining
    o OAB version 2
    o OAB version 3a
    o OAB version 4
    I checked properties of this tree folders on the replication tab I found Exchange serveur 2003
    so it's normlal ?
    if i change to exchange 2010 in the replication tab will affect nothing in my emails
    another thing when I try to Disable public folder distribution from offline address Book give this message :Offline address book "\NM Offline Address List"can't generate version 2 or 3 when public folder distribution is disabled .
    Regards
    e
    If you see Exchange 2003 here, that tells me you have not migrated the public folders over to 2010 properly.
    Look at this
    http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
    Also in this day and age, you should not be generating v2 and V3 of the OAB.  No supported clients will use that.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Exchange 2013: Event ID 2937 - MSExchangeSubmission.exe - edgetransport.exe - MSExchangeDelivery.exe - MSExchangeFrontendTransport.exe

    Hi
    I realise that there are a few threads about this specific ID, but all the solutions are unique to the particular occurrence. Could any of you gentleman or ladies have a look and tell me how to fix it please. Thanks in Advance
    Process MSExchangeFrontendTransport.exe (PID=6120). Object [CN=VSAT-PM Group,OU=Users,OU=Connecting Africa,DC=connectingafrica,DC=local]. Property [ArbitrationMailbox] is set to value [connectingafrica.local/Deleted Objects/SystemMailbox{1f05a927-9036-4018-a6c3-5c29c152f5ac}
    DEL:f068d90d-28c9-4eea-9e5b-e786bb7ff87d], it is pointing to the Deleted Objects container in Active Directory. This property should be fixed as soon as possible.
    Process MSExchangeDelivery.exe (PID=5532). Object [CN=VSAT-PM Group,OU=Users,OU=Connecting Africa,DC=connectingafrica,DC=local]. Property [ArbitrationMailbox] is set to value [connectingafrica.local/Deleted Objects/SystemMailbox{1f05a927-9036-4018-a6c3-5c29c152f5ac}
    DEL:f068d90d-28c9-4eea-9e5b-e786bb7ff87d], it is pointing to the Deleted Objects container in Active Directory. This property should be fixed as soon as possible.
    Process edgetransport.exe (Transport) (PID=15260). Object [CN=VSAT-PM Group,OU=Users,OU=Connecting Africa,DC=connectingafrica,DC=local]. Property [ArbitrationMailbox] is set to value [connectingafrica.local/Deleted Objects/SystemMailbox{1f05a927-9036-4018-a6c3-5c29c152f5ac}
    DEL:f068d90d-28c9-4eea-9e5b-e786bb7ff87d], it is pointing to the Deleted Objects container in Active Directory. This property should be fixed as soon as possible.
    Process MSExchangeSubmission.exe (PID=3888). Object [CN=VSAT-PM Group,OU=Users,OU=Connecting Africa,DC=connectingafrica,DC=local]. Property [ArbitrationMailbox] is set to value [connectingafrica.local/Deleted Objects/SystemMailbox{1f05a927-9036-4018-a6c3-5c29c152f5ac}
    DEL:f068d90d-28c9-4eea-9e5b-e786bb7ff87d], it is pointing to the Deleted Objects container in Active Directory. This property should be fixed as soon as possible.

    Hi,
    First verify that you have all 5 Arbitration Mailboxes with: Get-Mailbox -Arbitration
    The error you see indicates that the database they were on was deleted, possibly in ADSIEdit,and now you have recipients with an old value set. Can't say for sure, but it looks like groups and since they do have an ArbitrationMailbox configured by
    default and to fix them all in one go, just run:
    Get-DistributionGroup -resultsize unlimited | Set-DistributionGroup -ArbitrationMailbox "SystemMailbox{1f05a927*"
    Similar issue here:
    http://social.technet.microsoft.com/Forums/exchange/en-US/4378e410-c2c5-47a9-abc2-eb2926ff40da/the-recipient-is-configured-to-use-arbitration-mailbox-but-that-mailbox-has-been-deleted?forum=exchange2010
    Martina Miskovic

  • Event 1000 and event 1026 Faulting application name: DistributedCacheService.exe

    I have 2 WFE, 1 App,  all 3 Distributed Cache in Services On Server of CA are started,  but only 2 AppFabricCachingService are started on 3 server Services. When I go to notable server which AppFabricCachingService not started, found
    the application event log 1000 and 1026.
    Event 1000:
    Faulting application name: DistributedCacheService.exe, version: 1.0.4632.0, time stamp: 0x4eafeccf
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c78c
    Exception code: 0xe0434352
    Fault offset: 0x000000000000a49d
    Faulting process id: 0x3ff0
    Faulting application start time: 0x01cf5e97bc497df8
    Faulting application path: C:\Program Files\AppFabric 1.1 for Windows Server\DistributedCacheService.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 1bb07d62-ca8c-11e3-a299-005056b837e0
    Event 1026:
    Application: DistributedCacheService.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: Microsoft.ApplicationServer.Caching.DataCacheException
    Stack:
       at Microsoft.ApplicationServer.Caching.VelocityWindowsService.StartServiceCallback(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    I tried many times and many method, sometimes it is WFE1, sometimes it is WFE2, now it is APP server. 
    Don't know why.
    Thanks in advance.
    Awen

    Stop it on all servers then start on App servers, if it is stable then you can add another server and more.
    But it is not recommended to run the DC on all servers in farm, but in your case you have 3 servers.here MSFT position.
    "On a farm with four or more servers, you must not start the Distributed Cache service on all servers on the farm. If you configure all
    servers as cache hosts, you may experience reliability and performance problems in the farm."
    Are all of your server in the farm have the same memory, if not then that's your problem.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Tnslsnr.exe crashes 9i (9.0.1.1) on Windows 2000  anyone speak listener trace?

    I'm running 9i (9.0.1.1) on Windows 2000 Professional tnslsnr.exe crashes as soon as it is accessed.
    Here is an example of what happens when I use tnsping with listener trace on.
    Can anyone speak listener trace and tell me what is wrong?
    C:\>tnsping odb1 5
    TNS Ping Utility for 32-bit Windows: Version 9.0.1.1.1 - Production on 05-MAY-20
    02 06:40:10
    Copyright (c) 1997 Oracle Corporation. All rights reserved.
    Used parameter files:
    C:\oracle\ora90\network\admin\sqlnet.ora
    C:\oracle\ora90\network\admin\tnsnames.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = MYLAPTO
    P) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = ODB1)))
    OK (4450 msec)
    TNS-12547: TNS:lost contact
    C:\>
    Then I get a Program error dialog box
    ! TNSLSNR.exe has generated errors and will be closed by Windows. You will need to restart the program.
    An error log is bein created.
    here is my listener.ora
    # LISTENER.ORA Network Configuration File: C:\oracle\ora90\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = MYLAPTOP)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_DESC =
    (GLOBAL_DBNAME = ODB1)
    (ORACLE_HOME = C:\oracle\ora90)
    (SID_NAME = ODB1)
    here is my tnsnames.ora
    ODB1=(DESCRIPTION =
    (ADDRESS =
    (PROTOCOL = TCP)
    (HOST = MYLAPTOP)
    (PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = ODB1)
    here is the listener.trc run at level 4
         TNSLSNR for 32-bit Windows: Version 9.0.1.1.1 - Production on 02-MAY-2002 21:37:32
         Copyright (c) 1991, 2001, Oracle Corporation. All rights reserved.
         --- TRACE CONFIGURATION INFORMATION FOLLOWS ---
         New trace stream is C:\oracle\ora90\network\trace\listener.trc
         New trace level is 4
         --- TRACE CONFIGURATION INFORMATION ENDS ---
         --- PARAMETER SOURCE INFORMATION FOLLOWS ---
         Attempted load of system pfile source C:\oracle\ora90\network\admin\listener.ora
         Parameter source loaded successfully
         Attempted load of command line source
         Parameter source was not loaded
         -> PARAMETER TABLE LOAD RESULTS FOLLOW <-
         Successful parameter table load
         -> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
         LISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = MYLAPTOP)(PORT = 1521)))
         SID_LIST_LISTENER = (SID_DESC = (GLOBAL_DBNAME = ODB1) (ORACLE_HOME = C:\oracle\ora90) (SID_NAME = ODB1))
         TRACE_LEVEL_LISTENER = USER
         --- PARAMETER SOURCE INFORMATION ENDS ---
         --- LOG CONFIGURATION INFORMATION FOLLOWS ---
         Log stream will be "C:\oracle\ora90\network\log\listener.log"
         Log stream validation requested
         Log stream is valid
         --- LOG CONFIGURATION INFORMATION ENDS ---
         nsglldprm: Resolved "STARTUP_WAIT_TIME_LISTENER" to: 0
         nsglma: Listener's pid=712
         nttgetport: port resolved to 1521
         nttbnd2addr: looking up IP addr for host: MYLAPTOP
         nttcnp: Validnode Table IN use; err 0x0
         nsopen: opening transport...
         nttcnp: Validnode Table IN use; err 0x0
         nttcnp: getting sockname
         nsopen: transport is open
         nsopen: global context check-in (to slot 0) complete
         nsgllsn: completing partial addr: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MYLAPTOP)(PORT=1521)))
         nsgllsn: Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MYLAPTOP)(PORT=1521)))
         nsopen: opening transport...
         nsopen: transport is open
         nsopen: global context check-in (to slot 1) complete
         nsopen: opening transport...
         nttcnp: Validnode Table IN use; err 0x0
         nttcnp: getting sockname
         nttcnr: waiting to accept a connection.
         nttcnr: getting sockname
         nttvlser: valid node check on incoming node 127.0.0.1
         nttvlser: Accepted Entry: 127.0.0.1
         nttcon: set TCP_NODELAY on 336
         nsopen: transport is open
         nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
         nsopen: global context check-in (to slot 2) complete
         nsanswer: deferring connect attempt; at stage 5
         ntt2err: soc 336 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
         nscon: doing connect handshake...
         nscon: got NSPTCN packet
         nsevdansw: exit
         nscon: sending NSPTAC packet
         nscon: doing connect handshake...
         nscon: nsctxinf[0]=0x4d, [1]=0x9
         nsconbrok: asking transport to enable NTOBROKEN
         ntt2err: soc 336 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
         nsevdansw: exit
         nsdo: 516 bytes from NS buffer
         ntt2err: soc 336 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
         nsglgrDoRegister: Creating new instance: "odb1".
         nsglgrDoRegister: Creating new handler: "DEDICATED".
         nsdo: 188 bytes to NS buffer
         nsdo: 248 bytes from NS buffer
         ntt2err: soc 336 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
         nsdo: 116 bytes to NS buffer
         nsopen: opening transport...
         nttcnp: Validnode Table IN use; err 0x0
         nttcnp: getting sockname
         nttcnr: waiting to accept a connection.
         nttcnr: getting sockname
         nttvlser: valid node check on incoming node 127.0.0.1
         nttvlser: Accepted Entry: 127.0.0.1
         nttcon: set TCP_NODELAY on 316
         nsopen: transport is open
         nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
         nsopen: global context check-in (to slot 3) complete
         nsanswer: deferring connect attempt; at stage 5
         ntt2err: soc 316 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
         nscon: doing connect handshake...
         nscon: got NSPTCN packet
         nsevdansw: exit
         nscon: sending NSPTRF packet
         ntt2err: soc 316 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
         nstimarmed: no timer allocated
         nsclose: closing transport
         nsclose: global context check-out (from slot 3) complete
         nsglecmd: Deallocating cxd 0x13dffa0.

    Hi,
    I don't know too much about this to be honest but I have some suggestions so I'll throw my two cents worth in. A few things come to mind, first I'd check the client, the issue looks like its there, second check the local security setup and third if your using Active Directory there are special directory issues.
    Hope this helps

  • Expected actions of svchost.exe - what is interesting, in the context of monitoring what svchost.exe is doing?

    Hi,
    I have seen numerous articles explaining svchost, and I think I have a reasonable grasp of it (although basic).  My favourite article so far is
    http://www.bleepingcomputer.com/tutorials/list-services-running-under-svchostexe-process/#advanced, which I think is well written and very handy indeed!
    My current issue is that I am tweaking a security program called McAfee Host IPS, currently running on 2003 R2 and 2008 R2 servers, and getting a lot of events associated with svchost.exe that I believe require exceptions to be configured.  What I do
    not want to do, however, is configure an exception that hides something that may be useful information, however there is a balance required in what I am doing.
    Focusing on my current task at hand, I can confirm I have seen a large number of events associated with the below.  The below is all of the information I have on the Host IPS signature in question, although I am currently digging further.
    IPS Signature Name: CMD Tool Access by a Network Aware Application
    IPS Signature details: This event indicates an attempt by a networked application to access, modify or execute a system program that may be used to modify the configuration of your system.
    IPS Signature severity: Low
    I have seen a large number of events with threat source process = C:\WINNT\SYSTEM32\SVCHOST.EXE, and the following files, either accessed or executed.
    C:\WINNT\System32\tasklist.exe
    C:\WINNT\System32\ipconfig.exe
    C:\WINNT\System32\cmd.exe
    C:\WINNT\System32\route.exe
    As the above reference lists DLLs specifically, and not EXEs, I am not sure if this is expected (but am gathering it is, especially as the IPS signature details refers to 'system programs').
    I am suspecting that my best action here is to configure an exception for threat source process <systemdir>\SVCHOST.EXE and target files <systemdir>\*.*, as my hypothesis is that even if I have not seen it in the tuning phase, there are
    a lot of similar benign actions that could potentially trigger in the day to day workings of the OS.  I am also assuming that I will see similar in later versions of Windows Server OS.
    To throw a slight curveball, we are also integrated with a SIEM solution.  As this signature severity is low, it is mapped to a log action so nothing will actually be stopped, but if there are no exceptions, relevant events would go through to SIEM. 
    They could be filtered there, but potentially used in correlation rules or troubleshooting, but that obviously takes more space in the McAfee (ePO) database and the SIEM solution, which needs to be taken into account.
    Thoughts on this would be greatly appreciated - I genuinely wish I knew more about this subject!
    Cheers,
    Darren

    Hi,
    I am not sure what specific information you are looking for - could you clarify?  I think I have covered the majority of what is happening in my initial post, however if there is a specific bit of information you are after, let me know.
    The above is an article I had stumbled across, with the majority of the information contained in the link included in my initial post.  The final paragraph under 'could this process be a virus' is interesting - I have copied it below - from your perspective
    is this merely anecdotal or is there something behind it (references, if they exist, would be fantastic)?
    "As long as you make sure that the location of the file is in your Windows\System32 directory, you aren’t dealing with a virus. There have been cases of certain viruses trying to mimic the same filename, but they are always located in another directory."
    - source: http://www.howtogeek.com/howto/windows-vista/what-is-svchostexe-and-why-is-it-running/ , 09/01/15

  • Invalid session : connecting from developer 6i to sql server 2000

    Hi ,
    I am facing the following problem for connecting to sql server
    2000 from oracle forms 6i.
    Oracle developer 6i(form builder 6.0.8.11.3)
    sql server 2000
    o/s windows 2000 server
    plus80.exe <username>/<password>@odbc:<dsn_name>
    SQL*Plus: Release 8.0.6.0.0 - Production on Tue Oct 24 17:36:56
    2000
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    ORA-00022: invalid session id; access denied
    Error accessing PRODUCT_USER_PROFILE
    Warning: Product user profile information not loaded!
    You may need to run PUPBLD.SQL as SYSTEM
    Server not available or version too low for this feature
    ORA-00022: invalid session id; access denied
    Connected to:
    Oracle Open Client Adapter for ODBC 6.0.5.29.0
    Microsoft SQL Server 08.00.0194
    SQL>
    pls help
    Thanks in advance
    Yogesh

    Hello ,
    this forum must have a attachment option , so it very easy for others to update their development
    Now how can i paste the procedure it have 6 - 8 pages and when i paste it, the words merge or join with others word, it become very difficult to read,,
    anyhow
    mail me i send the document
    [email protected]

  • Microsoft.Exchange.Search.ExSearch.exe has CPU pinned for 8 hours

    I made some changes to my Exchange server today allowing for larger attachments. I changed the limits on the transport settings and all of the send and receive connectors. I also updated the web.config for OWA to allow up to 50MB. This part went fine.
    However, when the changes were done and I rebooted the server, I noticed the server was running very slow. I have found that the Microsoft.Exchange.Search.ExSearch.exe process has had the CPU maxed out ever since the reboot. This is a very small installation
    of exchange, currently there are less than 10 users and I would guess well less than 1000 total messages per day. I did send one 20MB test file, but that is it. Any idea what is causing this process to run like this?

    I had a similar issue after installing rollup 3 for 2010. Had a few entries in my event log about exsearch.exe like the one bellow. After i mounted the store that was offline everything started to run normal again.
    Log Name:      Application
    Source:        MSExchange Search Indexer
    Date:          06-04-2010 13:05:15
    Event ID:      104
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SRV-INT1-MBX-02.corp.local
    Description:
    Exchange Search Indexer failed to enable the Mailbox Database Mailbox Database 0770182310 (GUID = 47465cce-f302-4e5e-b307-dcbe76b6d79d) after 1 tries. The last failure was: Microsoft.Mapi.MapiExceptionMdbOffline: MapiExceptionMdbOffline: Unable to Get Catalog
    State (hr=0x80004005, ec=1142)
    Diagnostic context:
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 60049   StoreEc: 0x8004010F
        Lid: 49469  
        Lid: 65341   StoreEc: 0x8004010F
        Lid: 56125  
        Lid: 47933   StoreEc: 0x8004010F
        Lid: 32829  
        Lid: 49213   StoreEc: 0x8004010F
        Lid: 48573  
        Lid: 64957   StoreEc: 0x8004010F
        Lid: 31321   StoreEc: 0x476     
        Lid: 1750    ---- Remote Context End ----
        Lid: 19154   StoreEc: 0x476     
        Lid: 22081   StoreEc: 0x476     
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown)
       at Microsoft.Mapi.ExRpcAdmin.CiGetCatalogState(Guid mdbGuid, Guid instanceGuid, Int16& catalogState, Byte[]& blob)
       at Microsoft.Exchange.Search.CatalogState.GetConfigDataFromPropertyStore()
       at Microsoft.Exchange.Search.CatalogState.get_PropertyBlob()
       at Microsoft.Exchange.Search.Globals.DoesCatalogExist(CatalogState state)
       at Microsoft.Exchange.Search.Globals.CheckAndInitializeCatalog(CatalogState catalogInfo)
       at Microsoft.Exchange.Search.Driver.ProcessNewCatalogInternal(CatalogState catalog, List`1 mdbsToCrawl, Int32& numberOfDisabledMDBs). It will retry after 10 minutes.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Search Indexer" />
        <EventID Qualifiers="49156">104</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-04-06T11:05:15.000000000Z" />
        <EventRecordID>31811</EventRecordID>
        <Channel>Application</Channel>
        <Computer>SRV-INT1-MBX-02.corp.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Mailbox Database 0770182310</Data>
        <Data>47465cce-f302-4e5e-b307-dcbe76b6d79d</Data>
        <Data>1</Data>
        <Data>Microsoft.Mapi.MapiExceptionMdbOffline: MapiExceptionMdbOffline: Unable to Get Catalog State (hr=0x80004005, ec=1142)
    Diagnostic context:
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 60049   StoreEc: 0x8004010F
        Lid: 49469  
        Lid: 65341   StoreEc: 0x8004010F
        Lid: 56125  
        Lid: 47933   StoreEc: 0x8004010F
        Lid: 32829  
        Lid: 49213   StoreEc: 0x8004010F
        Lid: 48573  
        Lid: 64957   StoreEc: 0x8004010F
        Lid: 31321   StoreEc: 0x476     
        Lid: 1750    ---- Remote Context End ----
        Lid: 19154   StoreEc: 0x476     
        Lid: 22081   StoreEc: 0x476     
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown)
       at Microsoft.Mapi.ExRpcAdmin.CiGetCatalogState(Guid mdbGuid, Guid instanceGuid, Int16&amp; catalogState, Byte[]&amp; blob)
       at Microsoft.Exchange.Search.CatalogState.GetConfigDataFromPropertyStore()
       at Microsoft.Exchange.Search.CatalogState.get_PropertyBlob()
       at Microsoft.Exchange.Search.Globals.DoesCatalogExist(CatalogState state)
       at Microsoft.Exchange.Search.Globals.CheckAndInitializeCatalog(CatalogState catalogInfo)
       at Microsoft.Exchange.Search.Driver.ProcessNewCatalogInternal(CatalogState catalog, List`1 mdbsToCrawl, Int32&amp; numberOfDisabledMDBs)</Data>
        <Data>10</Data>
      </EventData>
    </Event>

  • Generating LabVIEW events via ActiveX

    I have a Labview 2010 Vi compiled to an EXE with ActiveX server enabled.
    The VI has a single control that is a latched boolean control that is used in an Event Handler.
    When I toggle this control, remotely, via an ActiveX client, the control changes state, but does not generate an event. (non-signaled).
    I can understand this behavior if the control was not a latched control, but I would have thought that the latched control would automatically generate an event, since it doesn't make a distinction between "value" and "value (signaled)".
    Other than monitoring/polling the control status and when it changes using a Value (Signal) local variable, is there a way to generate an Event, in a LabVIEW EXE, via ActiveX?  Or is there another, more appropriate way to accomplish this.  I'm trying to remotely run an program from another program through an activeX interface.   I suppose if every control had a unique message and I had a message handler loop, then I could just use the ActiveX control to insert the appropriate message into the Queue, but this is an existing application and would take a fair effort to set that up.

    What if you tried dynamically registering the event? You could create a reference to the boolean and use the Register for Events VI. Then, wire this event into the dynamic event terminal of the event structure (right click the border and say "Show Dynamic Event Terminals").  I don't have an ActiveX program to call into LabVIEW with, so I'm not sure if this will be any different than what you're doing now, but it's something easy to try.  Perhaps you could post you ActiveX code and LabVIEW code or a modified version of both illustrating what you're mentioning?

  • WaHostBootstrapper.exe crash

    I deployed a web role on a VM that has Windows Azure Emulator 2.2 installed. I saw the following info/error in event log then WaHostBootstrapper.exe had crashed.
    On the computer emulator UI, I saw the role state change: Busy/unhealthy/.../Unresponsive.
    I checked the package and did found
    Microsoft.WindowsAzure.ServiceRuntime.dll ( File version = 2.2.1198.9) at
    C:\AzureServices\WebRole\Acms.Service.Azure\csx\roles\Acms.Service\approot\bin
    I have copy/paste the events as below. Please help.
    Log Name:      Application
    Source:        Windows Azure Runtime 2.2.0.0
    Date:          4/3/2014 2:06:35 PM
    Event ID:      1002
    Task Category: (1)
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      accessproxy.vdomain.com
    Description:
    The description for Event ID 1002 from source Windows Azure Runtime 2.2.0.0 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the
    local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    C:\AzureServices\WebRole\Acms.Service.Azure\csx\roles\Acms.Service\approot\bin
    "C:\AzureServices\WebRole\Acms.Service.Azure\csx\roles\Acms.Service\approot\bin\Mds\MonitoringAgentLauncher.cmd"
    2
    Log Name:      Application
    Source:        Application Error
    Date:          4/3/2014 2:07:08 PM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      accessproxy.vdomain.com
    Description:
    Faulting application name: WaHostBootstrapper.exe, version: 2.2.1198.9, time stamp: 0x5230da90
    Faulting module name: WaHostBootstrapper.exe, version: 2.2.1198.9, time stamp: 0x5230da90
    Exception code: 0xc0000005
    Fault offset: 0x000000000000fddb
    Faulting process id: 0x1598
    Faulting application start time: 0x01cf4f80aa9f3d05
    Faulting application path: C:\AzureServices\WebRole\Acms.Service.Azure\csx\roles\Acms.Service\base\x64\WaHostBootstrapper.exe
    Faulting module path: C:\AzureServices\WebRole\Acms.Service.Azure\csx\roles\Acms.Service\base\x64\WaHostBootstrapper.exe
    Report Id: e9d7880e-bb73-11e3-88a6-124444444444
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-03T21:07:08.000000000Z" />
        <EventRecordID>19026</EventRecordID>
        <Channel>Application</Channel>
        <Computer>accessproxy.vdomain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>WaHostBootstrapper.exe</Data>
        <Data>2.2.1198.9</Data>
        <Data>5230da90</Data>
        <Data>WaHostBootstrapper.exe</Data>
        <Data>2.2.1198.9</Data>
        <Data>5230da90</Data>
        <Data>c0000005</Data>
        <Data>000000000000fddb</Data>
        <Data>1598</Data>
        <Data>01cf4f80aa9f3d05</Data>
        <Data>C:\AzureServices\WebRole\Acms.Service.Azure\csx\roles\Acms.Service\base\x64\WaHostBootstrapper.exe</Data>
        <Data>C:\AzureServices\WebRole\Acms.Service.Azure\csx\roles\Acms.Service\base\x64\WaHostBootstrapper.exe</Data>
        <Data>e9d7880e-bb73-11e3-88a6-124444444444</Data>
      </EventData>
    </Event>

    hi,
    Did you try to remove "Windows Azure Runtime " DLL file from your references? I suggest you could try to remove this file from your reference and add it again. At the same time, please make sure your DLL files version is right and the property "Copy
    Local" is true.Also, you could refer to this same thread (http://stackoverflow.com/questions/16342105/azure-roles-are-cycling-wahostbootstrapper-exe-crashing-faulting-module-ntdll
    Please try it. Any update info,please let me know.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • How to connect macbook to smart tv

    I have a 2008 macbook and want to connect iT to my Samsung smart tv. I have bought a minidisplayport to HDMI adapter and get a gold video signal in my tv, bit no. sound. Does anyone know how to get. this right?

  • Error in Asset Acquisition Interface

    Hi All, We have an Interface which creates an Improvement asset & acquires it. When we see the asset details in AS03, on the Depreciation areas tab, depreciation key was getting blank. This whole process happens using three jobs in sequence. The last

  • Outlook 2010 corrupting incoming pdf attachments for one user

    I have one user here that is having incoming pdf attachments get corrupted in Outlook 2010. When she tries to open the file, it gives the error "Adobe Reader could not open filename.pdf because it is either not a supported file type or because the fi

  • Install Printers now displaying in System Preferences

    We are a school district using Casper to manage our computers. We are switching the way we manage printers (our Canon Copiers) from a managed printer to a scripted printer using CUPS scripting to install the printer. For the most part, it is working

  • Withhholding taxes for customers

    Hello, i have activated withholding taxes for customers. It works correctly if I enter just one item in the billing document, but if I enter 2 items, one of them with withholding tax prize condition and the other one without withholding tax condition