Event 29 and 24 that cannot receive the time source in windows server 2003

I have one server windows server 2003 R2 pop up the event log as below
Event 29
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently
accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.
Event 24
Time Provider NtpClient: No valid response has been received from domain controller server01.xxxxx.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize.
My domain controller server01 do not have any pop up event log for the time service.
I have found some information in Mircosoft TechNet would suggest such as restart the time service with command prompt. I have tried for it. But the event id keep on to pop up for each hour.
Should I configure for the time service can read for the hardware?
Moreover, if I still read the time from DC, any configuration can be done for my server and domain controller? Thanks!

Hi,
Thanks for your question.
Would you please tell us that if the DC holds a role of PDC emulator? If yes, you can run “DCdiag” on the DC to check if it is advertising itself as a Time server. In addition,
please make sure that no firewall is blocking UDP port 123 and you can also ping the DC on the client computer to verify that the client computer is capable of contacting the desired source.
In addition, please make sure that the value of the
AnnounceFlags in the registry below is 10:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config
Please also make sure the value of
Type
in the registry below is set to NT5DS:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters
More information:
Windows Time Service Tools and Settings
http://technet.microsoft.com/en-us/library/cc773263(v=ws.10).aspx#w2k3tr_times_tools_suxb
Best regards,
Susie

Similar Messages

I am a new iPod shuffle 4th Generation user and I cannot sync the music in my Windows Media play to my new iPod, can someone help?

I am a new iPod shuffle 4th Generation user and I cannot sync the music in my Windows Media play to my new iPod, can someone help?

Hi Daisymae3,
The iPod shuffle does not use Windows Media Player to sync, it uses Apple’s iTunes application, available for free from this web site -
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
See also the manual for your iPod shuffle -
User Manual iPod shuffle
manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User_Guide .pdf
Specifically Chapter 3 - Setting up the iPod shuffle.
iTunes is the free software application you use to set up, organize, and manage your content
on iPod shuffle.
Thanks for using Apple Support Communities.
Best,
Brett L

Problems with the shared files of Windows Server 2003 and Mac

I have some Mac computers in the domain of my LAN Network, and when I share a folder in Windows Server 2003 sometimes the Mac can not see and sometimes yes, but lasts a long time so that they can view folders. I have installed the protocol Apple Talk on the server and File Server and in the Domain Server.
The folders when users have no security users or groups are immediately with a connection AFP, but if they have not already created security can be displayed with a connection AFP, but if you can visualize a connection with SMB, but I can not work with Quark 6.0 Pro files.
What can I do to solve this problem.
Asalomon

The newer printers:
canon irc3100
canon ir5020-i have working on osx side, not in classic
Older printers:
hp laserjet 5m-2 of these
hp 2200
hp laserjet 5si-2 of these
hp laserjet 4100
These are installed on windows 2003 with mac print services running. I need to know what option i should use in osx when installing these network printers on these macs. When i go to printers folder, i chose windows printing then it prompts for the ppd file. I found it for the ir5020 but not the ir3100. I really need to test the hp laserjets in osx too. Ill post up when i test those. But that one canon (ir3100) is bothering me. They are roughly the same age and the drivers on the site don't seem to work.

Cannot print to PDF Printer in Windows server 2003 x64 (Adobe 9 STD)

Hi everyone,
I'm running into a very odd issue. We are using Citrix Presentation Server 4.5 in our environment. Recently, I install the x64 bit version of Citrix on top of Windows Server 2003 x64.
The problem that we are experience right now is that when user open a WORD or EXCEL document and try to print to PDF. The SAVE AS windows shows up to allow users to save, but nothing happens afterward. In another word, no PDF file is created.
However, if I ask the user to right click on the file (in windows explorer) and choose Convert to PDF, then the conversion go through.
Do you know a fix for this?

You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.

Do I need the /3gb switch on Windows Server 2003 Enterprise Edition

I have an Oracle 10g database running on a Windows Server 2003 Enterprise Edition with 16gb of RAM. Do I need to set the /3gb and or /PAE switch in the boot.ini file for Oracle to use this memory?

This metalink doc talking pretty extensively about the setting
Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
Doc ID: Note:225349.1
As you might know 32bit system has limitation of 4G max addressable memory issue. In Windows that's 2G limit because Windows reserve 2G for system. With /3G switch you can let Application address 3G with 1G for OS, if your system has more than 4G you need to use /PAE to address memory beyond 4G.
Of course if you don't plan to allocate more than 2G to Oracle SGA then don't need the settings.

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

/3 Gb switch, Windows Server 2003 and no imagecfg.exe!

The Imagecfg tool is not provided in the support toolkit for Windows Server 2003. How do I then implement the /3 Gb switch for oracle.exe and tnslsnr.exe as has been recommended in Metalink notes 116076.1 and 46001.1?
Also does this not appear a bit confusing:
Note 1036312.6 states:
On Windows NT Server, Enterprise Edition 4.0, Microsoft provides the 4GT (4GB
RAM Tuning) support so an application can utilize up to 3GB virtual memory
instead of the 2GB limit as it used to be.
The Windows NT service pack 3 provides the same feature but is not officially
claimed in the SP3 readme.txt.
The Oracle 8.0.3 release and higher have already been enabled to take
advantage of the new feature.
However a more recently updated note (46001.1) states:
d) Configuring the Oracle process to make allocations greater than 2GB
The Oracle database supports the 4GT tuning feature of Windows NT Server,
Enterprise Edition from release 7.3 onwards, allowing it to access up to 3GB
of virtual address space per instance. It may be the case that certain
releases / patch sets do not have the 4GT flag set even though the release
does support the feature. To check the executable has been correctly enabled
run :
imagecfg oracle.exe
oracle.exe contains the following configuration information:
Subsystem Version of 4.0
Image can handle large (>2GB) addresses
Stack Reserve Size: 0x100000
Stack Commit Size: 0x1000
For executables that do not have the flag set, run :
imagecfg -l oracle.exe
The above settings will only take affect if the boot.ini has been set up as
described in Note 46053.1.
So, do we really require to run the imagecfg utility (which is no longer provided in 2003 server support tool package) for versions higher than 8.1.7? Which tool should I then use instead of imagecfg for Windows Server 2003?

I think one of the reasons behind those Notes is that in older releases support for the feature existed and despite 7.3.4 or 8.0.3 and onwards had the capabilities, some patch sets or patches "forgot" this. The first Note you references says
"There may be a case where you are running 8.0.4.3.7 on NT and the 3gig address issue required the use of imagecfg to access the larger address space. One major reason might be the fact that patch sets may have brought in an executeable without the flag being set."
Sometimes it can be really hard to get notes on metalink to add upp, maybe mostly because there is so much info to maintain and cope with...
I dont think you should worry much about it. In any case, the developer/vendor who controls the code need to make sure the program is in reality large address aware and set flags accordingly.
If you want to check, to report something back to Oracle Support, there is dumpbin.exe to verify image header available in Visual Studio. Dont know of a public alternative.
http://msdn2.microsoft.com/en-us/library/c1h23y6c.aspx

Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

We have a report package that generates customised reports
We generate the PDF's by simply "printing" to the Adobe PDF printer
In Windows XP Pro (32 Bit) the report creates the PDF perfectly
In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
With thanks
Mark

I think it will work fine if you use the "Enterprise" authentication option. It may have dependencies on 32 bit components. So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS. That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels. I'm not sure if that is considered "full support".
We are trying to use the LDAP authentication option, but that tab is disabled. Other tabs such as Active Directory and WinNT are disabled as well. There maybe another component that we must bring down to 32 bit processing.
Is there a way to enable the LDAP authentication configuration tab?
thanks

Why Windows server 2003 enterprise edi is the recommended OS for Netweaver?

Hi All,
I am in a client discussion stage and the client is a huge enterprise going for SAP installation.
In order to implement SAP Netweaver 2004 S, the recommended OS is Windows Server 2003 Enterprise Edition?
I need to be equipped about the difference feature wise between Enterprise and Standard Edition.
Any kind of help is really appreciated.
It is a bit urgent.
So Tribe please come together and help me out.
Points will be rewarded for the timely help.
Thanks
Anila

why not have a look yourself
-> http://technet.microsoft.com/en-us/windowsserver/bb294403.aspx
as you might see, the standard edition of win2k3 only supports up to 4 gb of ram, 4 cpus and it seems that there will be not 64bit edition...so, these might be some reasons, why sap recommends the enterprise edition
GreetZ, AH

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I am confused. Do you mean you found the music, not the tones, or you can't find either?
If the former, then this is normal. You can't redownload tones from the Cloud.

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity

Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

I recently upgraded to Lion and i find that my computer is running slow and applications are crashing. For example I have Word 2011 for Mac and it crashes all the time I end up losing my work. It often happens when I'm in notebook trying to record.

i recently upgraded to Lion and i find that my computer is running slow and applications are crashing. For example I have Word 2011 for Mac and it crashes all the time I end up losing my work. It often happens when I'm in class using notebook and when I press record my computer starts thinking and it freezes.
Also, I feel that it overheats often and my battery runs out pretty quickly. I had the macbook (black) and this never happened before. I'm not sure if I'm doing something wrong or if there is something with my computer.I bought my computer summer 2010, I don't think this should be happening. Please Help......

This is exactly what keeps happening to mine too. I was at a conference taking notes, and I was
using the Notebook template, and doing some audio recording simultaneously. About 3 hours into the conference (not consistently recording, but on and off with the sessions) my file wouldn't save anymore, saying something like "File cannot be modified while in use with another program" and "Invalid file name" when I would go back into my folder to look for it). I tried installing some updates from Microsoft, and when I restarted, I was at least able to open my old notes again, and so far it looks like the audio was working. However, today at the conference, the same thing happened again, but I wasn't actively recording any audio (though after I had copy and pasted my second file of notes into the original, I went back to using it after re-naming it).
Does the crash happen to you under similar cirucumstances? The update might help a little, but it is definitely not the solution. Does anyone have any solutions? Lion shouldn't be this buggy... I moved to Mac to get away from the garbage of bugs and compatibility issues...

I did not keep the email with my registration for the free trial so I do not have a serial number as I have no products due to the fact that my trial has expired but I would now like to purchase a product and I cannot skip the serial number request.

I did not keep the email with my registration for the free trial so I do not have a serial number as I have no products due to the fact that my trial has expired but I would now like to purchase a product and I cannot skip the serial number request in order to buy the product it's so irritating I'm about to just do a different product altogether... anyone know how to get or bypass the serial number request?

You must first make the purchase, then you will receive the serial number you are asking about. YOu do not acquire the serial number thru the software. You acquire it thru the purchase, possibly via a follow-up confirmation email.

I have signed in to my mail on my ipod but it keeps saying 'the connection to the server failed' and i cannot receive or send anything what should i do?

i have signed in to my mail on my ipod but it keeps saying 'the connection to the server failed' and i cannot receive or send anything what should i do?

Did it work on the iPod before?
Can you access that mail account on other devices?
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Event 29 and 24 that cannot receive the time source in windows server 2003

Similar Messages

Maybe you are looking for