Event 4, Kernel-eventTracing
I periodically see this warning in the event log: The maximum file size for session "McAfee.{E4367DA7-2B80-47f3-86D2-7626A18FC6F4}" has been reached. As a result, events might be lost (not logged) to file "C:\ProgramData\McAfee\MCLOGS\ETW\mclogs.etl".
The maximum files size is currently set to 16777216 bytes.
It is immediately followed by this error: Session "McAfee.{E4367DA7-2B80-47f3-86D2-7626A18FC6F4}" stopped due to the following error: 0xC0000188
Can someone walk me through fixing this, it is getting annoying as it pops up almost every few days in the event viewer.
Some things that i think might work but am not sure how to do are: Making the maximum file size bigger, or making the log circular. I have tried changing both of these using performance monitor, but since the logging process is in event trace sessions,
and not startup event trace sessions, it seems that the changes are only saved until i restart the computer. Then, the event trace session is recreated with the old, faulty settings. I have tried simply deleting the log, but this does not seem to help as it
is simply recreated the next time i start the computer. Please help.
Hi,
I suspect this issue is related with some logging mechanism in McAfee, these log files do not rotate automatically at this time, so once the logs are full, then logging should stop and shows this error, （there might be an option to set the log file size
or clear the log, sorry but I'm not familiar with the logging mechanism of McAfee, hope this link could be helpful https://community.mcafee.com/message/309658
It is recommended to contact this support for they're more familiar with their product, may bring more different ideas for you.
McAfee Support
http://service.mcafee.com/default.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support
Similar Messages
-
Hello,
I upgraded my machine to Win7 x64 Pro about 3 weeks ago. My HW is an Asus mobo, Intel Q9450 w/8GB RAM. The boot drives are two Raptors configured as RAID01. All the drivers are the latest available from Intel, Asus and 3rd party vendors. My WEI is 5.9, limited by the disk transfer rates, otherwise 7.1 and 7.2 on the other indexes.
I've been receiving these errors at boot;
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 11/10/2009 7:51:03 AM
Event ID: 4
Task Category: Logging
Level: Warning
Keywords: Session
User: SYSTEM
Computer: herbt-PC
Description:
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>4</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>1</Task>
<Opcode>10</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2009-11-10T12:51:03.393985600Z" />
<EventRecordID>28</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="164" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>herbt-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">ReadyBoot</Data>
<Data Name="FileName">C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl</Data>
<Data Name="ErrorCode">3221225864</Data>
<Data Name="LoggingMode">0</Data>
<Data Name="MaxFileSize">20971520</Data>
</EventData>
</Event>
The image for PID 4 is listed as System.
My searches have turned up similar events listed but no solutions.
Any help would be appreciated.
Cheers!Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
As suggested above I assume this is a microsoft issue? It has been discussed here and other forums for quite some time. I never have seen a fix? I wish when we received errors of this nature microsoft would tell us what they were. How is this related to superfetch? What is superfetch? Why would superfetch have changed?
BY THE WAY.... Superfetch is on(started) is on automatic and logs on as local system. So this is not the cause of my issue. Also what is readyboot? Does the average computer really know what these programs/services or unique microsoft words/terms are?
System
Provider
[ Name]
Microsoft-Windows-Kernel-EventTracing
[ Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
[ SystemTime]
2010-04-11T14:35:49.829600000Z
EventRecordID
25
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
48
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
Daddy-PC
Security
[ UserID]
S-1-5-18
EventData
SessionName
Circular Kernel Context Logger
FileName
ErrorCode
3221225525
LoggingMode
268436608
Windows7, Windows, Win7 -
Microsoft-Windows-Kernel-EventTracing Error 2 happens twice at boot EX2013CU7
Not sure what it is. The server is running Server 2012 R2 and it is a VM. It has exchange and associated necessary features, roles, and prerequisites and nothing else installed. I have uninstalled and reinstalled Exchange 2013 CU7 3 times
and each time this error has been present. It happens twice at boot and seems to cause no problems.
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 12/23/2014 10:06:53 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer: myserver.mydomain.local
Description:
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2014-12-23T17:06:53.273839900Z" />
<EventRecordID>2</EventRecordID>
<Correlation />
<Execution ProcessID="3640" ThreadID="10016" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>Valis.PBJFS.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">FastDocTracingSession</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225525</Data>
<Data Name="LoggingMode">9</Data>
</EventData>
</Event>Hi,
This Event can be ignored. To prevent this Event prompt, please follow steps below:
1. Set the MetricsSelfSelectionSelected value in the registry to
2.
2. Restart the
Windows Azure Telemetry Service service.
3. Stop the
WindowsAzure-GuestAgent-Metrics event trace session.
More details, please refer following blog:
Event ID 2: Session "WindowsAzure-GuestAgent-Metrics" failed to start with the following error: 0xC0000035
http://blogs.msdn.com/b/mast/archive/2014/07/09/event-id-2-session-quot-windowsazure-guestagent-metrics-quot-failed-to-start-with-the-following-error-0xc0000035.aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Kernel-EventTracing Failure Errors every 30 minutes
A couple months ago I started getting the following error on one of my Windows 2012 Standard servers. The errors occur about every 30 minutes. I've searched high and low and can't find a solution for this. Can anyone tell me where to look?
Thanks,
Joe
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 6/11/2014 2:58:09 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: NETWORK SERVICE
Computer: Server24.internal.com
Description:
Session "" failed to start with the following error: 0xC0000022
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2014-06-11T07:58:09.331919500Z" />
<EventRecordID>3533</EventRecordID>
<Correlation />
<Execution ProcessID="2840" ThreadID="4540" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>Server24.internal.com</Computer>
<Security UserID="S-1-5-20" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225506</Data>
<Data Name="LoggingMode">276824069</Data>
</EventData>
</Event>Hi,
When exactly do you receive this error message? You could try to stop event trace session, please see:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
http://social.technet.microsoft.com/Forums/windowsserver/en-US/02ac2078-ac0e-48d1-b3db-3f2e76319afb/session-wbadmininbuilttracing-failed-to-start-with-the-following-error-0xc0000035?forum=windowsbackup
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Event 1001, BugCheck + Event 41, Kernel-Power
hello,
I'm getting these random restarts on my laptop i baught just few months ago.
In the event viewer i found Event 41, Kernel-Power
followed by an Event 1001, BugCheck.
Please help.
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
3
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2014-03-25T23:24:31.654884500Z
EventRecordID
21937
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Arseni_Graifer
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
159
BugcheckParameter1
0x3
BugcheckParameter2
0xffffe000059b3620
BugcheckParameter3
0xffffd00020c6b840
BugcheckParameter4
0xffffe00000c83010
SleepInProgress
0
PowerButtonTimestamp
0
BootAppStatus
0
System
Provider
[ Name]
Microsoft-Windows-WER-SystemErrorReporting
[ Guid]
{ABCE23E7-DE45-4366-8631-84FA6C525952}
[ EventSourceName]
BugCheck
EventID
1001
[ Qualifiers]
16384
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-25T23:24:56.000000000Z
EventRecordID
21926
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
System
Computer
ARSENI_GRAIFER
Security
EventData
param1
0x0000009f (0x0000000000000003, 0xffffe000059b3620, 0xffffd00020c6b840, 0xffffe00000c83010)
param2
C:\WINDOWS\MEMORY.DMP
param3
032614-25828-01
My tech specs:
proccessor: Intel Core i7-3632QM CPU @ 2.20GHz 2.20GHz
NVIDIA Geforce GT 635M
LENOVO IDEAPAD Z500Hi,
First, for this issue, please open device manager and check updates for power driver first.
Then, we consider that this issue is related to BSOD, please help to upload the minidump file here for our research:
Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled, refer to the step “Configure the dump type” in following article:
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263#method2
Kate Li
TechNet Community Support -
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 ::: -
I have been getting random crashes since I build this computer. Any solutions? This is what I see base on event viewer.
I have tested my memory using memory diagnostic and ran memtest for 11 hours.
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
2
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2014-02-23T08:25:56.872802400Z
EventRecordID
27701
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Tobizor-PC
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
0
BugcheckParameter1
0x0
BugcheckParameter2
0x0
BugcheckParameter3
0x0
BugcheckParameter4
0x0
SleepInProgress
false
PowerButtonTimestamp
0
My tech specs
Intel i7-4770K
MSI 7870GHZ
MSI Z87-G41
G.SKILL 8GB 1600
Intel 530 240gb
Rosewill Hive 750WPlease provide a copy of your System Information file. Type
System Information in the Search Box above the start Button and press the ENTER key (alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is
located. Do not place the cursor within the body of the report before exporting the file. The system creates a new System Information file each time system information is accessed. You need to allow a minute or two for the file to be fully
populated before exporting a copy. Please upload to your OneDrive, share with everyone and post a link here. Reports in normal mode preferred. Please say if the report
has been obtained in safe mode.
Please upload and share with everyone copies of your
System and Application logs from your Event Viewer to your OneDrive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window expand Windows
Logs and select System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files. Do not clear logs whilst you
have a continuing problem.
For help with
OneDrive
see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Hope this helps, Gerry -
Recieve hardware change events from kernel
is it possible to receive events from the kernel pertaining to hardware. For example would it be possible to get a notification whenever the power button is pressed etc etc
ps Ignore the "etc etc" I just added that for good measure, I'm mainly concerned with the power buttonhttp://developer.apple.com/mac/library/documentation/DeviceDrivers/Conceptual/IO KitFundamentals/PowerMgmt/PowerMgmt.html#//apple_ref/doc/uid/TP0000020-SW4
-
I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 24/12/2009 09:08:20
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer: George-XXL
Description:
Session "" failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
<EventRecordID>36</EventRecordID>
<Correlation />
<Execution ProcessID="1944" ThreadID="1948" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>George-XXL</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225485</Data>
<Data Name="LoggingMode">5</Data>
</EventData>
</Event>Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn't know what he's talking about because if you tell someone its ok to "safely ignore the errors in the event log" as a blanket instruction ESPECIALLY because as he stated so himself
he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it's just my opinion....I could be wrong! -
Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2012-02-01T00:02:48.677610900Z
EventRecordID 8270
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer LR8K6TLC.cntr.thrivent.corp
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots. I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you. -
I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+ New-PerfCounters -DefinitionFileName $f
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
+ FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible. -
Session "Circular Kernel Context Logger" failed to start with the following error: 0xC0000035
fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session "Circular
Kernel Context Logger" failed to start with the following error: 0xC0000035 Event Xml: <event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"><system><provider guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}"
name="Microsoft-Windows-Kernel-EventTracing"><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime="2014-04-16T16:04:17.657816300Z"><eventrecordid>44</eventrecordid> <correlation><execution processid="4" threadid="60"><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid="S-1-5-18"></security></execution></correlation></timecreated></provider></system> <eventdata><data name="SessionName">Circular
Kernel Context Logger</data> <data name="FileName"></data> <data name="ErrorCode">3221225525</data> <data name="LoggingMode">268436608</data> </eventdata> </event>The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral -
USB/eSata express card not working on stock kernel
Hello everyone,
I have a weird problem and I don't seem to find any solution by myself. Let me give you some background info on what I plan to do.
I purchased an express card to eSata/USB 3.0 adapter and want to make it work on my laptops. Precisely, it is this card: http://www.amazon.de/Notebook-Express-C … B007F8TXZ8
1: Lenovo X200s (1,6GHz) running Ubuntu 14.04 amd64
2: Lenovo X200s (1,6GHz) running Debian 7 amd64
3: Lenovo X200T (1,6GHz) running ArchLinux amd64
The card does work fine only on the Ubuntu machine. I would like to make it run on the two other ones as well. I thought I might get help here getting it to work on machine 3 and then transfer the results to machine 2. What really matters to me is eSata, btw, I do not even have a USB 3.0 device to test with.
First of all, here's what happens when I plug the card into machine 1:
user@1-ubuntu:~$ uname -r
3.13.0-39-generic
user@1-ubuntu:~$ dmesg | tail -n 44 # that's where it begins
[ 1953.576472] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
[ 1953.728077] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 1953.728119] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 1953.728304] pci 0000:05:00.0: PME# supported from D3hot
[ 1953.736062] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf0007fff 64bit]
[ 1953.736087] pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 1953.736092] pcieport 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1953.736098] pcieport 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 1953.736104] pcieport 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
[ 1953.736133] pci 0000:05:00.0: no hotplug settings from platform
[ 1953.736143] pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 1953.736398] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.736406] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1953.743621] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
[ 1953.743629] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 1953.743635] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 1953.743784] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 1953.743788] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.743791] usb usb9: Product: xHCI Host Controller
[ 1953.743794] usb usb9: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.743796] usb usb9: SerialNumber: 0000:05:00.0
[ 1953.743973] hub 9-0:1.0: USB hub found
[ 1953.743990] hub 9-0:1.0: 2 ports detected
[ 1953.744147] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1953.744153] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 10
[ 1953.744218] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 1953.744221] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1953.744224] usb usb10: Product: xHCI Host Controller
[ 1953.744227] usb usb10: Manufacturer: Linux 3.13.0-39-generic xhci_hcd
[ 1953.744229] usb usb10: SerialNumber: 0000:05:00.0
[ 1953.744366] hub 10-0:1.0: USB hub found
[ 1953.744383] hub 10-0:1.0: 2 ports detected
[ 1954.447851] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 1954.460505] usb 10-1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 1954.461215] usb 10-1: New USB device found, idVendor=174c, idProduct=5106
[ 1954.461219] usb 10-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1954.461222] usb 10-1: Product: AS2105
[ 1954.461225] usb 10-1: Manufacturer: ASMedia
[ 1954.461228] usb 10-1: SerialNumber: 00000000000000000000
[ 1954.463146] usb-storage 10-1:1.0: USB Mass Storage device detected
[ 1954.463279] scsi7 : usb-storage 10-1:1.0
[ 1955.460385] scsi 7:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
[ 1955.465099] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 1955.466483] sd 7:0:0:0: [sdb] Attached SCSI removable disk
I wouldn't know of any attached disks, and neither does it show up. Note that it is only the card I plugged in, no hard drive attached to it.
hburg1234@packrehsel:~$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 20e4
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Kernel driver in use: mei_me
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
Subsystem: Lenovo Device 20ec
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Lenovo Device 20f0
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f1
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
Subsystem: Lenovo Device 20f8
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
Subsystem: Intel Corporation WiFi Link 5100 AGN
Kernel driver in use: iwlwifi
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: Device 174c:2104
Kernel driver in use: xhci_hcd
The last one seems to be important to me, so here's a verbose output on that one.
user@1-ubuntu:~$ lspci -v | tail -n 8
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: Device 174c:2104
Physical Slot: 3
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f0000000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
user@1-ubuntu:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[2585.956558] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0 (pci)
KERNEL[2585.972086] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9 (usb)
KERNEL[2585.972116] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb9/9-0:1.0 (usb)
KERNEL[2585.975736] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10 (usb)
KERNEL[2585.975763] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-0:1.0 (usb)
KERNEL[2586.689218] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1 (usb)
KERNEL[2586.690935] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0 (usb)
KERNEL[2586.695723] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9 (scsi)
KERNEL[2586.695757] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/scsi_host/host9 (scsi_host)
KERNEL[2587.692633] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0 (scsi)
KERNEL[2587.692667] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0 (scsi)
KERNEL[2587.692691] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_disk/9:0:0:0 (scsi_disk)
KERNEL[2587.692708] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_device/9:0:0:0 (scsi_device)
KERNEL[2587.692824] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/scsi_generic/sg1 (scsi_generic)
KERNEL[2587.692898] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/bsg/9:0:0:0 (bsg)
KERNEL[2587.699636] add /devices/virtual/bdi/8:16 (bdi)
KERNEL[2587.699771] add /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.703694] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
KERNEL[2587.709178] change /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb10/10-1/10-1:1.0/host9/target9:0:0/9:0:0:0/block/sdb (block)
Apart from the supposedly found block device (can't judge) I am not sure if there is anything that is really eSata specific and not USB 3.0 related.
So far what I think I can tell from the output is that the modules
pciehp pci pcieport
seem to be dealing with the express card as such whereas
xhci_hcd
takes care of USB 3.0. I cannot see any clear reference to the eSata connector, which might not be surprising if the bus is just passed through (again: not sure).
For completeness' sake here comes the output of
user@1-ubuntu:~$ lsmod | tee before
Module Size Used by
ctr 13049 1
ccm 17773 1
pci_stub 12622 1
vboxpci 23194 0
vboxnetadp 25670 0
vboxnetflt 27613 0
vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci
cuse 13445 3
dm_crypt 23177 1
btusb 32412 0
cdc_ether 14351 0
usbnet 43913 1 cdc_ether
cdc_acm 28803 0
mii 13934 1 usbnet
cdc_wdm 19053 0
rfcomm 69160 8
bnep 19624 2
bluetooth 391136 22 bnep,btusb,rfcomm
binfmt_misc 17468 1
coretemp 13435 0
kvm_intel 143148 0
kvm 451729 1 kvm_intel
thinkpad_acpi 81013 0
nvram 14411 1 thinkpad_acpi
serio_raw 13462 0
arc4 12608 2
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_hda_codec_conexant 57441 1
iwldvm 232285 0
snd_hda_intel 56451 3
mac80211 630653 1 iwldvm
snd_hda_codec 192906 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_rawmidi 30144 1 snd_seq_midi
lpc_ich 21080 0
iwlwifi 169932 1 iwldvm
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
mei_me 18627 0
cfg80211 484040 3 iwlwifi,mac80211,iwldvm
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
mei 82276 1 mei_me
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 17 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
parport_pc 32701 0
ppdev 17671 0
mac_hid 13205 0
tp_smapi 28367 0
thinkpad_ec 14449 1 tp_smapi
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
i915 783961 2
psmouse 106714 0
ahci 25819 3
libahci 32716 1 ahci
i2c_algo_bit 13413 1 i915
e1000e 254433 0
drm_kms_helper 55071 1 i915
drm 303102 3 i915,drm_kms_helper
ptp 18933 1 e1000e
pps_core 19382 1 ptp
video 19476 1 i915
wmi 19177 0
and a list of the newly loaded modules:
user@1-ubuntu:~$ diff before <(lsmod)
1a2
> usb_storage 62209 0
Now, on my Arch machine the situation is as follows when the card is plugged in:
user@3-arch:~$ uname -r
3.17.2-1-ARCH
user@3-arch:~$ sudo udevadm monitor -k
monitor will print the received events for:
KERNEL - the kernel uevent
user@3-arch:~$ lsmod
Module Size Used by
sr_mod 21903 0
cdrom 47479 1 sr_mod
hid_generic 12393 0
usbhid 48603 0
hid 102220 2 hid_generic,usbhid
cdc_ether 12564 0
usbnet 34978 1 cdc_ether
cdc_acm 30362 0
cdc_wdm 17427 0
mii 12675 1 usbnet
ctr 12927 0
ccm 17534 0
fuse 87410 3
joydev 17063 0
wacom_w8001 12706 0
serport 12842 1
mousedev 17272 0
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
kvm 417429 0
pcspkr 12595 0
psmouse 107214 0
evdev 21544 20
mac_hid 12633 0
serio_raw 12849 0
i2c_i801 16965 0
snd_hda_codec_conexant 21835 1
snd_hda_codec_generic 63126 1 snd_hda_codec_conexant
arc4 12536 2
iwldvm 184847 0
mac80211 604456 1 iwldvm
i915 905750 2
lpc_ich 20768 0
iwlwifi 156837 1 iwldvm
snd_hda_intel 26387 0
snd_hda_controller 26938 1 snd_hda_intel
cfg80211 445286 3 iwlwifi,mac80211,iwldvm
thinkpad_acpi 69074 0
e1000e 215686 0
snd_hda_codec 108536 4 snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
drm_kms_helper 80934 1 i915
shpchp 35210 0
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
ptp 17692 1 e1000e
pps_core 17225 1 ptp
snd_timer 26614 1 snd_pcm
wmi 17339 0
drm 259106 4 i915,drm_kms_helper
nvram 13034 1 thinkpad_acpi
thermal 17559 0
snd 73436 8 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 13031 2 snd,snd_hda_codec
led_class 12859 2 iwldvm,thinkpad_acpi
rfkill 18867 3 cfg80211,thinkpad_acpi
ac 12715 0
hwmon 12930 2 coretemp,thinkpad_acpi
acpi_cpufreq 17218 1
battery 17452 0
i2c_algo_bit 12744 1 i915
mei_me 17900 0
tpm_tis 17182 0
i2c_core 50152 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
tpm 31467 1 tpm_tis
mei 75079 1 mei_me
intel_agp 17432 0
intel_gtt 17848 3 i915,intel_agp
video 18043 1 i915
processor 27777 3 acpi_cpufreq
button 12953 1 i915
sch_fq_codel 17343 6
tp_smapi 27621 0
thinkpad_ec 12813 1 tp_smapi
ext4 497696 3
crc16 12343 1 ext4
mbcache 17171 1 ext4
jbd2 86417 1 ext4
sha256_ssse3 25692 2
sha256_generic 16804 1 sha256_ssse3
ecb 12737 0
cbc 12696 1
algif_skcipher 17051 0
af_alg 12988 1 algif_skcipher
dm_crypt 22551 1
dm_mod 93490 15 dm_crypt
sd_mod 44398 3
crct10dif_generic 12581 1
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_generic,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ata_generic 12490 0
ahci 33291 2
libahci 27158 1 ahci
pata_acpi 12771 0
uhci_hcd 43507 0
ehci_pci 12512 0
ehci_hcd 69939 1 ehci_pci
libata 181518 4 ahci,pata_acpi,libahci,ata_generic
usbcore 199381 9 uhci_hcd,ehci_hcd,ehci_pci,usbhid,usbnet,cdc_acm,cdc_wdm,cdc_ether
usb_common 12440 1 usbcore
scsi_mod 147543 3 libata,sd_mod,sr_mod
i8042 18002 1 libps2
serio 18282 9 serio_raw,atkbd,i8042,serport,wacom_w8001,psmouse
Sticking to my suspicion that this might just be a USB related issue and eSata might still work due to some sort of passthrough, I attached the very eSata drive that I could mount on Ubuntu. It did not work.
I then researched and found this blog post: http://okomestudio.net/biboroku/?p=1360
So I downloaded the pkgbuild for the arch linux core kernel and checked the config. It matched the recommendations.
Another hint I found was to unload acpiphp and force-reload it. However, this tip does not seem to apply to the arch kernel:
[user@3-arch:~$ sudo rmmod acpiphp
rmmod: ERROR: Module acpiphp is builtin.
Anyone any idea on how to make the card work?
Thank you!
Last edited by archery1234 (2014-11-15 10:46:35)For anyone else seeking help on that: Card slot was deactivated in 2/3 Bioses.
-
This warning appears in Event Viewer every day on T530 w/ Win7-64
Event 37, Kernel-Processor-Power
The speed of processor [0,1,2,3] in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 86398 seconds since the last report.
Can anything be done to fix this?I assume you are running on AC power. Look in the power manager. My settings are set to "maximum performance", when running on AC. Also, the CPU can be slowed down if you are running too hot. If the power settings were already set to maximum performance, run a temperature monitor program. I use TPFANCONTROL (free)
-
¿Why my Windows 7 Pro have Kernel-Power error 41?
Hello, good morning, I installed Windows 7 Professional Edition and each time freezes and restarts, I open the event viewer and I see several critical events would like to see if someone can help me. They say "Event 41, Kernel-Power", I occasionally
happen ... especially when browsing internet through a USB modem ZTE MF-193, but I have also occurred trying to play games like Half Life 1 or Warcraft 3.
My pc specs are as follows. According to the Direct X diagnostics are:
Time of this report: 4/5/2014, 07:24:38
Machine name: FAMILY-PC
Operating System: Windows 7 Professional 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: Spanish (Regional Setting: Spanish)
System Manufacturer: Intel
System Model: DG41WV
BIOS: BIOS Date: 01/07/09 15:28:41 Ver: 08.00.10
Processor: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz (2 CPUs), ~3.0GHz
Memory: 2048MB RAM
Available OS Memory: 1980MB RAM
Page File: 1317MB used, 2643MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
System events in XML view say:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-04-05T11:11:43.116009800Z" />
<EventRecordID>16184</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Familia-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">278</Data>
<Data Name="BugcheckParameter1">0xfffffa8001e65010</Data>
<Data Name="BugcheckParameter2">0xfffff88007225cb0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0xc</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
another says:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-03-27T10:45:49.941213100Z" />
<EventRecordID>9491</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Familia-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">59</Data>
<Data Name="BugcheckParameter1">0xc0000005</Data>
<Data Name="BugcheckParameter2">0xfffff96000686d15</Data>
<Data Name="BugcheckParameter3">0xfffff88002a200d0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
And the latest says:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-04-03T15:16:12.334410200Z" />
<EventRecordID>14621</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Familia-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>
I sincerely appreciate your support, I really like windows 7 but Windows XP I never thought such failures in the last hour I had 2 of them in the last 24 hours I've had 4 and in the last 7 days I've had 25.
It is a very distressing situation.YM
These were called BCC116 and are related to a video timeout/failure
"It's not a true crash, in the sense that the Blue Screen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception".
Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OS's like XP to crash.
As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds.
If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.
The first step is to install the newest video driver.
If playing with video driver versions hasn't helped, make sure the box is not overheating.
Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU.
Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference.
If so, it might be as simple as dust buildup and subsequently inadequate cooling.
I would download cpu-z and gpu-z (both free) and keep an eye on the video temps
For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557263%28v=vs.85%29.aspx
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\040514-15771-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a53000 PsLoadedModuleList = 0xfffff800`02c90e50
Debug session time: Sat Apr 5 07:08:35.611 2014 (UTC - 4:00)
System Uptime: 0 days 0:25:10.484
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {fffffa8001e65010, fffff88007225cb0, 0, c}
Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+23cb0 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa8001e65010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88007225cb0, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 000000000000000c, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
igdkmd64+23cb0
fffff880`07225cb0 4889542410 mov qword ptr [rsp+10h],rdx
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: firefox.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
fffff880`061000f8 fffff880`06d3ccbc : 00000000`00000116 fffffa80`01e65010 fffff880`07225cb0 00000000`00000000 : nt!KeBugCheckEx
fffff880`06100100 fffff880`06d3c938 : fffff880`07225cb0 fffffa80`01e65010 fffffa80`034ebd50 fffffa80`03253010 : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`06100140 fffff880`06c0ff07 : fffffa80`01e65010 00000000`00017a38 fffffa80`034ebd50 fffffa80`03253010 : dxgkrnl!TdrIsRecoveryRequired+0x114
fffff880`06100170 fffff880`06c3dd7e : fffffa80`ffffffff 00000000`000179b8 fffff880`061002c0 00000000`00000000 : dxgmms1!VidSchiReportHwHang+0x40b
fffff880`06100250 fffff880`06c23bb1 : fffffa80`034ee000 ffffffff`feced300 00000000`00000000 00000000`00000001 : dxgmms1!VidSchWaitForCompletionEvent+0x196
fffff880`06100290 fffff880`06c3091c : 00000000`0000fea9 00000000`00000000 fffff880`06100798 fffffa80`01ef5010 : dxgmms1!VIDMM_GLOBAL::xWaitForAllEngines+0x1e9
fffff880`06100390 fffff800`02f2fd38 : ffffffff`ffffffff ffffffff`ffffffff 00000000`00000000 00000000`00000000 : dxgmms1!VIDMM_MEMORY_SEGMENT::RotateCopyCallback+0xe0
fffff880`06100400 fffff880`06c3594c : 00000000`0f5c0000 fffff880`061006d8 00000000`00000000 fffff8a0`00000002 : nt!MmRotatePhysicalView+0x6e8
fffff880`06100640 fffff880`06c2feb8 : fffffa80`034eec60 00000000`00100000 00000000`00000000 00000000`00000000 : dxgmms1!VIDMM_PROCESS_HEAP::Rotate+0x148
fffff880`061006d0 fffff880`06c21904 : fffffa80`034fdec0 fffff8a0`03643b00 00000000`00000001 fffff880`06100800 : dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0x6f8
fffff880`06100840 fffff880`06c217e3 : fffffa80`034ee000 fffff880`06c2170a 00000000`00000000 fffffa80`02b253c0 : dxgmms1!VIDMM_GLOBAL::EvictAllAllocationInList+0x40
fffff880`06100880 fffff880`06c1e70d : 00000000`0000005a 00000000`00000000 00000000`00000000 fffffa80`00000000 : dxgmms1!VIDMM_GLOBAL::EvictAllReclaimedAllocation+0x43
fffff880`061008d0 fffff880`06c3865d : 00000000`00000000 fffff8a0`02dd8510 fffffa80`00000000 fffffa80`02b253c0 : dxgmms1!VIDMM_GLOBAL::PrepareDmaBuffer+0xc79
fffff880`06100aa0 fffff880`06c38398 : fffff800`0401c080 fffff880`06c37d00 fffffa80`00000000 fffffa80`00000000 : dxgmms1!VidSchiSubmitRenderCommand+0x241
fffff880`06100c90 fffff880`06c37e96 : 00000000`00000000 fffffa80`019de500 00000000`00000080 fffffa80`03253010 : dxgmms1!VidSchiSubmitQueueCommand+0x50
fffff880`06100cc0 fffff800`02d68166 : 00000000`01b39914 fffffa80`03252620 fffffa80`017e8840 fffffa80`03252620 : dxgmms1!VidSchiWorkerThread+0xd6
fffff880`06100d00 fffff800`02aa3486 : fffff800`02c3de80 fffffa80`03252620 fffff800`02c4bc40 fffff880`01246a90 : nt!PspSystemThreadStartup+0x5a
fffff880`06100d40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
igdkmd64+23cb0
fffff880`07225cb0 4889542410 mov qword ptr [rsp+10h],rdx
SYMBOL_NAME: igdkmd64+23cb0
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: igdkmd64
IMAGE_NAME: igdkmd64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a01d55b
FAILURE_BUCKET_ID: X64_0x116_IMAGE_igdkmd64.sys
BUCKET_ID: X64_0x116_IMAGE_igdkmd64.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x116_image_igdkmd64.sys
FAILURE_ID_HASH: {88759713-193a-fb8a-dab9-6846ea1a48f2}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag
Maybe you are looking for
-
My Windows 7 crashed a couple days ago after a windows update, I got this message. Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off. I restarted the
-
G3 Powerbook as external display?
Is this even possible? I know about the patch to make the iMac spanning to any external monitor, but I have a G3 that I'd like to make a use of. Thanks!
-
The Move Tool ? Is it working right in this example? newbie question
I'm new to photoshop. I'm trying the 30 day trial. I am doing the 2nd lesson from the book, Adobe Photoshop CS4 by Adobe. Its the lesson with the "Pitch In" post card where you type some text on the picture with the horizontal text tool.(Lesson 01, "
-
How do I view saved Internet Connect password?
When I first got online, I saved my ISP's password. It is NOT 10 digits long, but I just noticed when I open Internet Connect, it has 10 bullets on the password line. I would like to see what it has saved there. But I can't find Internet Connect list
-
Latest debug releases for mactinosh (9.0.28.0) do not include Universal Binary version
latest debug releases for mactinosh (9.0.28.0) do not include Universal Binary Release, the installers only have PPC binaries for both the standalone projector and the debug plugin. Please, please post the UB build of 9.0.28.0 debug! Thanks!