Event 4004, Error 9098. after deleting and recreating replication group

I have my primary server replicating with 3 servers and 3 different replication groups across a WAN. I'm working through a hardware upgrade, and need to move my RG up one folder level now at one of the locations now that I have the new hardware in place.
I've removed the RG in DFS manager, I stopped the dfs service and deleted the DFSPrivate folder from both servers.
Now when I recreate the RG, one folder level higher on the primary server, it replicates in AD/event log on both servers, but after about 7min I get the error 9098 on the primary, and a failure error on the secondary server.
Replication is still working to other 2 servers, so I'm afraid to run the rmdir "D:\System Volume Information\DFSR" /s command in fears that it will mess up the other 2 RG's.
Is there a better way to kickstart this new RG? is my only option to rebuild the DB? What does rebuilding do, just rebuild all the file indexes? will I need to also delete it on all the secondary servers? I have good backups of all the data, so I'm not too
concerned about loosing data, just downtime, and long hours for me.
I also tried creating a new folder on the secondary server, it seemed to get a little further, it created a new DFSPrivate folder, but still failed a short time later with the same 9098 error on the Primary. I know another option is to recreate the folder
on both servers, copy data, and replicate, but I'd rather not if I don't have to.

Followup for anyone in the same boat. on my existing RG, I purged the dfsr folder from both servers(3 servers in total), with the dfs replications service stopped, and each leg of the connecting disabled and purged the DFSPrivate directories, I then restarted
the service, and enabled the replication for each connection, replication connected on each server but did not start replicating, I had to restart the dfsr service on each server again, and manually set the primary server, both were set to NO when I checked
membership status. No data loss in this process, it all worked very slick, the initial replication finished in about 2hrs.
I was then able to recreate the connection for my 2nd replication group that started all of this, it fired right off, no more 9098 errors since both dfsr databases were re-created.

Similar Messages

Can't leave voice message. Error 13014 after deleting and recreating Lync account

I deleted a Lync 2010 account that I was having issues with and recreated it. Now when I try to leave a voice message I received a fast busy. In the Lync logs I see the following error:
ms-diagnostics
: 13014;reason="The routing rules did not result in a final response and callee is not enabled for Unified Messaging";
I've tried disabling and re-enabling UM but it doesn't work. Any idea how to resolve?

Hi,
Did the issue happen only for the Lync account which you recreated before or also happen for multiple users?
Please check if you have assigned the correct number in Line URI in user settings.
Please also check if there any policy influence it.
You can refer to the link of “Lync Exchange UM Integration”:
http://blog.schertz.name/2010/11/lync-and-exchange-um-integration/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Farm Account gets Access Denied error when accessing SharePoint Subsites after Account was deleted and recreated in Active Directory .

A SharePoint Domain Account(farm admin account) was deleted and recreated with the same absolute credentials in AD due to this i cannot navigate to certain sites, not even able to edit web parts and cant view site actions menu.
The account has full permissions across the site and is a site admin.
I have tried to import the old login to the new login
stsadm -o migrateuser-oldlogin <domain\name>-newlogin <domain\name> [-ignoresidhistory]
But this did not help as it didnt resolve the SID's issues.
I couldn't restore the deleted object(AD acc) too.
Is there a way that i can use to get this account to work again?
There option of creating a new domain accout and give it full permissions is not recommened by the client.
So i must find a to get this account to work again.
Thank you in Advance.
Calvin

Hi,
I would have a look in Active Directory first. Because a new account can't have same IDs that an old one, your new account can't be used instead of the old one, even if login, password and group memberships seems to be set all the same.
If your forest functionnal level is 2008R2 or more, and if Active Directory Recycle bin has been enabled, you can probably restore the deleted account.
you can find the way to restore a deleted account here :
https://technet.microsoft.com/en-us/library/dd379509%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
If your forest is set to a previous functionnal level or the recycle bin is not enabled, you could give a chance to authoritative restore, as described here :
https://technet.microsoft.com/fr-fr/library/cc816878(v=ws.10).aspx
hope it helps
Sébastien

Help! Must Delete and Recreate Bluetooth Device Each Sync

I need to Hotsync my Treo 650 under both Mac OS X v.5 (Leopard) and Win XP on the same machine running under Boot Camp. Before Leopard, I was able to do this via Bluetooth (cable on Treo 650 does not work right at all) without issue.
Under Leopard, when I try to Hotsync, I get the error, "Unable to initiate Hotsync operation because port is in use by another application". If I Delete the device from the Bluetooth list and setup the device from scratch, it works perfectly and continues to do so while in Leopard.
But when I go to Win XP under Bootcamp and try to sync, I get the same error message all over again. To fix it, I delete and recreate the device setup in Bluetooth and it syncs just fine while in XP. But when I return to Mac OS X, I am back to the same error message and must delete and recreate the device again.
Does anyone know how I can set up the Treo 650 so that I don't have to delete and recreate the Bluetooth setup everytime I need to sync?

Hi,
see this thread :
http://forums.ni.com/t5/LabVIEW/Using-the-Bluetooth-of-a-Mobile-Phone-with-LabVIEW/m-p/1623196#M5864...
regards,
V-F

Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

Anybody had an issues with mail since upgrading to mountain lion? Can't get emails from one account, tried deleting and recreating but to no avail. Set up a new user and it works fine. Macbook pro 13" mid 2010 model.

Delete and recreate in MD01

Hi,
When I run MRP in MD02 for a finished material with Planning mode=3 , system is deleting existing Stock transfer PR and re creating Stock Transfer PR.But when I run in MD01 with Planning mode=3 , system is not deleting existing Stock transfer PR and not re creating a new one. Old one is retained!!
Why delete and recreate is not working in case of MD01??. Pls help
Regards.

PP,
1. How to decide whether to create a planning file entry in MD20, and then run in NETCH OR ELSE directly run with NEUPL?
That depends upon what you are trying to accomplish, and what your business requirements are. Planning file entries are generally created automatically, so creating one manually seldom has to be done on a day to day basis. NEUPL has the disadvantage that it consumes considerably greater amount of processing power than any Net change mode. You have to decide what you want, and what you are willing to spend to get it.
2. If I tell to my client to use NEUPL in MD01, then whats the difference wrt NETCH
I hope you are not saying that you don't know the difference between regenerative MRP and Net Change MRP. If this is the case, I suggest you do some homework. Start with
http://help.sap.com/erp2005_ehp_06/helpdata/EN/f4/7d2dba44af11d182b40000e829fbfe/frameset.htm
If this does not answer your questions, then you need to discuss this matter with a senior PP consultant on your team.
Best Regards,
DB49

ABAP dictionary : can we delete and recreate transparent table

Hi Experts,
I would like to know if we can delete and recreate transparent table which had already been transported to another server? Will it create any other problem?
The reason why I want to do this is that I want to transport the table contents and the table was earlier created under the class 'Application table' . Now I want to create it under 'Customizing table' class.
Thanks in advance

I think you can change the table's Delivery class in SE11.
Than you can add your entries in the transport request.
Follow these steps:
(1) Create a transport request
(2) Open it, update mode
(3) Add a line with R3TR TABU <table name>, select the line created
(4) goto Menu, Key list and add the two keys list you have created (* is wildcard, mandt+key)
(5) Save, release and transport your request
No need to delete and regenerate it.
Regards,
Naimesh Patel

How to delete and recreate Photoshop and Illustrator preferences

Can anyone tell me how to delete and recreate my Photoshop and my Illustrator's preferences?

Photoshop Help | Preferences

Everytime I open InDesign it comes up with an error, even after uninstalling and reinstalling?

Everytime I open InDesign it comes up with an error, even after uninstalling and reinstallin. How do I get it to work?

Nobody can know since you haven't botehred to actually tell us what error you get and then the usual like system information or what version of ID you actually mean. Your post is totally useless.
Mylenium

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this.

I downloaded IOS6 a week ago, now, all of a sudden the when I try to send emails the server connection fails. I have tried deleting and recreating the email account, but no good. Any suggestions?

I downloaded IOS 6 a week ago and just last night the server connection fails when I try to send an email. I tried deleting and recreating the email account several times, but it still doen't work. Any ideas?

Are you using yahoo? If so, wait it out. Yahoo has had a lot of issues lately and you just have to wait for them to fix it.

When i delete and album or group of albums do they go intoa hidden recycle bin

when i delete and album or group of albums on my IPod by using the delete function do they go into a hidden recycle bin (taking up valuable space on my Device) which I then need to empty at some point..if so how do I do this Please? thanks

They should be totally delete and free up that storage space. However, sometimes that does not happen and they become "other"

Error Prompted after add and remove record immediately

Dear ALL
I caught the problem as follows:
1. Add a new Records at a popup.
2. Save and Commit and Refresh the page
3. Remove that newly added record
4. Error prompted about null primary key and that record cannot be removed
Alternatively, I move out to another page after save and then back to the same page, then the delete process is OK. I wonder why the error comes. Need your kind advise.
Regards
Trewina

One possibility is that in step 3 now row is marked as current row.
How do you delete the row? Select it in a table?
Timo

Thumbnail Cache Randomly Deleting and Recreating

I have a ton of photos on the computer and having to wait for the thumbnails to cache is a pain, in fact, the only pain so far with windows 7. I'm just wondering if anybody else is having this problem where the thumbnail cache spontaneously deletes itself and then all the thumbnails have to cache again. This happens at least once a day. Is there something that I'm doing to cause this? Any help is much appreciated. Thank you

Like everyone else this has been driving me nuts, I've got literally zillions of images & videos that are god-awful to scan in Explorer without thumbnails, and most of those (RAW photos & videos) are ultra-slow to recreate.
HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/ThumbnailCache
MaxCacheFileSize1024 (default: 5880 decimal)
MaxCacheFileSize256 (default: 366 ")
MaxCacheFileSize32 (default: 82 ")
MaxCacheFileSize96 (default: 682 ")
I've upped each one by 10x (remember to restart Explorer), let's hope it works ...
Interesting, I do not even have this key? Can't believe Microsoft haven't fixed this yet, it must be a trivial thing to allow users to set their own max value. They are even passing off the problem as fixed when this 'fix' does not actually work! http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/82f82ef8-caf7-49d0-96a7-611ce87eeba2
I have simply given up on Windows Explorer to show photos now, Faststone Image Viewer does a much better job with many more features and all explorer functions included, just set your main pictures folders as favourites- right click "Add Folder to Favorites",
and you're away. Most importantly, the thumbnails never get deleted and will automatically load by just clicking the folder, no need to scroll down as in Windows Explorer. Double click a file to view full screen, move mouse to left you have, all advanced file
and draw functions, to right, file attributes, EXIF, histogram data, below simple draw functions, image zoom & navigation, mouse to top to get scroll bar to access all images in the folder & navigate to new folders or favorites, return to main program. You
can customize many functions including thumbnails, mouse functions in settings.
http://www.faststone.org/FSViewerDownload.htm
I was still having this problem even after changing the folder permissions based on the "Answer" above. However, I think I finally figured it out. The problem was that all my photo thumbnails were being sorted by "Date
Taken" descending. When I changed this to "Name", which is the default I think, I no longer expericed the long delays while the thumbnails showed up. So I'm not sure if it was actually a cache issue or just that Windows will always
go through the list of files to try and re-sort (or something) by Date Taken or perhaps whatever other criteria you are using. Just go with Name and see if that helps.
There should no 'delay' in showing thumbnails, XP never had this problem, if you use Faststone Viewer as I recommend above, you'll never see any delays whatsoever after the thumbnails load the 1st time, and no disappearing thumbnails ever again.

TS3276 Beginning on December 23rd I was no longer able to receive incoming emails on my computer. They appear on the server. My iphone can retrieve them, but my mail program on my computer can't see them. I tried deleting and recreating account. Didn'

I'd been using the program on the same computer for years. I've tried just about everything now, backing up my email boxes to my desktop and deleting them, creating a new account and deleting the old one. I've checked the behaviors. I've dumped tons of old emails. Help. There is one other thing that was happening in the months before that I didn't realize. As my computer downloaded the incoming files, they were not being erased from the server. I don't know why. I hadn't changed any settings. The Rep from my server company insisted it was that I'd maxed out the program or something was corrupt and recreating the account would help. It didn't. When I'd done everything else and backed up everything, I also tried deleting the Cache in the Finder. No difference. Help.

How much mail are we talking about here? Roughly how many messages, and roughly how many gigabytes of mail?
Who is the mail provider? Is this a local provider on a local network, or one of the "free" providers, or something from your ISP?
Do you have free disk space on your OS X system here, or is it possible that your disk is getting full?
As for the usual diagnostics for problems with Mail.app, launch Mail.app and select the Connection Doctor from the Window menu, let it run, select More Details, and re-run the tests. Expunge any personally-identifying information and post the results here, if they don't make the trigger clear.
You can also try a mailbox repair pass; there's a Rebuild option in the Mail.app menus.
If the downloads are failing, then the usual trigger is the IMAP or POP password setup; there are two entirely seperate connections and two separate credentials and such; the send path (SMTP) and the receive (IMAP or POP) path. Usual triggers for problems are changes to the mail servers involved, or the mail ports, or the credentials needed; I've seen vendors change each of those, and forget to mention it to their users.
That OS X version is extremely old. (I don't have anything nearly that old to check the details fo the setup of that version; 10.6.8 is the oldest OS X version I have handy.)

Event 4004, Error 9098. after deleting and recreating replication group

Similar Messages

Maybe you are looking for