Event 41 Kernal Power Windows 8.1

<p>Please help. My pc restarts and I need a bit of help diagnosing it. Can someone please look at the minidump files in the link
https://skydrive.live.com/redir?resid=78F64FBC2B98E1AC%21722
any help would be appreciated.
Thanks

Hi,
Also, refer to link:
Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first" in Windows 8, Windows Server 2012, Windows 7, or Windows Server 2008 R2
http://support.microsoft.com/kb/2028504/en-us
Alex Zhao
TechNet Community Support

Similar Messages

Microsoft Windows Kernal Power

I have a computer that has bluescreened twice without anything happening. Both times it is reported that no one is using the laptop. It's just sitting there not doing anything. I looked at the Event Viewer and there are Kernal-Power events, and then Kernal-Processor-Power
events. The most recent gave me these details:
- System
- Provider
[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0
Keywords 0x8000000000000002
- TimeCreated
[ SystemTime] 2015-04-09T19:18:11.102008100Z
EventRecordID 29574
Correlation
- Execution
[ ProcessID] 4
[ ThreadID] 8
Channel System
Computer LIZ2-PC
- Security
[ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0
I'm trying to assess why these blue screens are occurring so I can do some preventative work on it. Be it replacing the computer or the RAM, this issue is slowing productivity and I need to rectify it before it halts productivity.

We do need the actual log files (called a DMP files) as they contain the only record
of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.
Thanks!
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Kernal-Power Alarm repeatedly appear after each month and server restart un-expectedly

We are facing un expected restart issue almost on every month using the window 2008r2, what could be the cause of this issue. Please support
Kernal-Power event ID 41 appear after happening this issue

Hi,
Please refer to the article below to see if it helps:
Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2
http://support.microsoft.com/kb/2028504
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Event 1001, BugCheck + Event 41, Kernel-Power

hello,
I'm getting these random restarts on my laptop i baught just few months ago.
In the event viewer i found Event 41, Kernel-Power
followed by an Event 1001, BugCheck.
Please help.
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
3
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2014-03-25T23:24:31.654884500Z
EventRecordID
21937
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Arseni_Graifer
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
159
BugcheckParameter1
0x3
BugcheckParameter2
0xffffe000059b3620
BugcheckParameter3
0xffffd00020c6b840
BugcheckParameter4
0xffffe00000c83010
SleepInProgress
0
PowerButtonTimestamp
0
BootAppStatus
0
System
Provider
[ Name]
Microsoft-Windows-WER-SystemErrorReporting
[ Guid]
{ABCE23E7-DE45-4366-8631-84FA6C525952}
[ EventSourceName]
BugCheck
EventID
1001
[ Qualifiers]
16384
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-25T23:24:56.000000000Z
EventRecordID
21926
Correlation
Execution
[ ProcessID]
0
[ ThreadID]
0
Channel
System
Computer
ARSENI_GRAIFER
Security
EventData
param1
0x0000009f (0x0000000000000003, 0xffffe000059b3620, 0xffffd00020c6b840, 0xffffe00000c83010)
param2
C:\WINDOWS\MEMORY.DMP
param3
032614-25828-01
My tech specs:
proccessor: Intel Core i7-3632QM CPU @ 2.20GHz 2.20GHz
NVIDIA Geforce GT 635M
LENOVO IDEAPAD Z500

Hi,
First, for this issue, please open device manager and check updates for power driver first.
Then, we consider that this issue is related to BSOD, please help to upload the minidump file here for our research:
Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled, refer to the step “Configure the dump type” in following article:
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263#method2
Kate Li
TechNet Community Support

Error in event handler method in window

Hi,
I have created configuration in SEFVISU, to receive the workitem i have created a parameter in event handler method in window
but it is throwing dump The ASSERT condition was violated, if i remove that parameter means application executing properly but i am not able to pass the unique, values please guide me.
Regards,
Srini.

Hello Srini,
are you talking about the default event handler method of the window? if so then you need to ensure that the parameter name defined in the event and passed in name are same. And also its better to go for the parameter type as STRING.
other option would be instead of defining the static parameters in the event handler method, you can get the parameters from the WDEVENT itself by accessing WDEVENT->PARAMETERS table.
hope this helps.
BR, Saravanan

Capture All Mouse and Keyboard events even if java window NOT in FOCUS

Hi All,
Is this possible to capture all mouse and keyboard events even if java window is not in focus or is minimized. This java program should cature each and every event from the user once the program is started. Any help in this regard is appreciated!
Thanks&Regards
Sam

I don't think you can. (without JNI)

The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name:      Security
Source:        Microsoft-Windows-Eventlog
Date:          1/15/2015 11:12:39 AM
Event ID:      1108
Task Category: Event processing
Level:         Error
Keywords:      Audit Success
User:          N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2.

...Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time.

Recommendations for low power Windows Labview controller

I build a lot of battery powered Labview systems. The lowest power Windows controllers I've been able to find are the Intel Atom based units (e.g. iGoLogic iBox510 at about 3-5 Watts). I'd love to find something in the 1 Watt or less range. Does anyone have any suggestions? I'd be willing to consider non-windows solutions if they had really low power consumption.
Thanks - Gene

Yes, that is correct that the modules need to be plugged into a chassis or controller. I'll take a look into our controllers and see if any of them meet those power constraints.
Jon
Applications Engineer
National Instruments

Mouse Events "Falling Through" During Window Activation

I'm implementing a "tool pallette" in my application (much like tools in an application like Photoshop) and I want the user to be able to immediately click on options on this pallete without having to make the window active. Since Swing doesn't have an explicit "Pallete" window that would give this to me for free, I'm assuming I need to subclass JDialog to make this happen.
Even if window activation still must happen, it's crucial that the user only needs to click once to press the button on an inactive window.
I know I can detect WindowEvents like WINDOW_ACTIVATED by simply adding my own window listener, but I don't know how I'd go about having mouse events "fall through" the window listeners and cause the appropriate action on the underlying component. It's almost as if I need to tell the window itself to listen for nothing.
I thought glass planes may be the answer, but that doesn't seem to be what's preventing the intial click in an inactive window from falling through to the underlying component.
Any thoughts, comments, or experiences regarding this are greatly appreciated!

The solution to this problem was posted in the Swing forum. Turns out to be a simple difference of JWindow and JDialog, but a difference I wasn't seeing under all L&Fs (i.e., Windows L&F handles JDialog properly, MacOSX (Aqua) L&F seems to treat it like any other window... I've filed a bug with them).

Kernal power Event 41

I have an MSI P55-ga55/Intel i5 760/4GB 1333mhz ram all at stock and running on a Corsair 550VX PSU but twice I've had this issue where the pc just reboots itself. It happened once exactly two weeks ago and again today. Both times I was running mozilla firefox and just surfing the web. I can gurentee it's not a heat or overclock issue ( i dont oc) since my cpu and gpu are below 40 most of the time. Btw i run windows 7 x64.
Any help will be nice =)

Have you entered you MB model wrong? I think it should be P55A-G55 as there is no P55-GA55 that I know of.
It must have been set to run at XMP profile and providing there's no defect with the RAM it should be fine at 1333 and if still a bit of trouble leave at 1333 and set Command Rate (CR) to 2T instead of 1T. It's possible you may need to bump voltage to 1.55 maybe but give it a try at 1333 1.5V 1st.
As can be seen in your CPU-Z shots it should have been at 2T for XMP and was at 1T instead.
Yes, it's the Ripjaw series in particular that's been a problem and not a general G.skil problem.

BLACK SCREEN on start up with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-power

Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.

You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 :::

Event 41, Kernel-Power

I have been getting random crashes since I build this computer. Any solutions? This is what I see base on event viewer.
I have tested my memory using memory diagnostic and ran memtest for 11 hours.
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
2
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2014-02-23T08:25:56.872802400Z
EventRecordID
27701
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Tobizor-PC
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
0
BugcheckParameter1
0x0
BugcheckParameter2
0x0
BugcheckParameter3
0x0
BugcheckParameter4
0x0
SleepInProgress
false
PowerButtonTimestamp
0
My tech specs
Intel i7-4770K
MSI 7870GHZ
MSI Z87-G41
G.SKILL 8GB 1600
Intel 530 240gb
Rosewill Hive 750W

Please provide a copy of your System Information file. Type
System Information in the Search Box above the start Button and press the ENTER key (alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is
located. Do not place the cursor within the body of the report before exporting the file. The system creates a new System Information file each time system information is accessed. You need to allow a minute or two for the file to be fully
populated before exporting a copy. Please upload to your OneDrive, share with everyone and post a link here. Reports in normal mode preferred. Please say if the report
has been obtained in safe mode.
Please upload and share with everyone copies of your
System and Application logs from your Event Viewer to your OneDrive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window expand Windows
Logs and select System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files. Do not clear logs whilst you
have a continuing problem.
For help with
OneDrive
see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Hope this helps, Gerry

DistributedCOM Event ID 10010 on Windows 2008 R2

Hi,
I'm getting following error on one of my Virtual Windows 2008 R2 server and have tried lots of solutions but still this event logging on my server.
The GUID mentioned in the event is related to Virtual Disk Service and I have verified all security permission related setting in component services as well as in Windows Registry but no luck yet.
Please help to resolve this issue.
Following are the event details:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 19/04/2013 9:02:54 PM
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: ExchangeSVR.Gen3Com.local
Description:
The server {7D1933CB-86F6-4A98-8628-01BE94C9A575} did not register with DCOM within the required timeout.
<System>
<Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
<EventID Qualifiers="49152">10010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-04-19T11:02:54.000000000Z" />
<EventRecordID>133132</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>ExchangeSVR.Gen3Com.local</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">{7D1933CB-86F6-4A98-8628-01BE94C9A575}</Data>
</EventData>
</Event>
Thanks,

Hi Thakur,
I believe, this thread may help to fix DCOM issue.
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/8c292062-64f2-4c1a-8c50-13ababb67738/
Regards, Ravikumar P

Help to create a SCOM Alert for same event ID on many Windows 2008 servers

Hi all,
I 'm a newbie in SCOM and I need to create a alert with information type on 1 event ID on 2 servers. The Event ID is the same on both servers and I don't know which type of monitor I need to create. Can you help me please ?
Thanks a lot.

Hi,
First, should the server appear unhealthy if this event appears? If so, it should be a monitor. If not, it should be a rule (that will only give an alert).
Go to Authoring and Rules/Monitors. Set the scope to Windows Server. Create the Rule/Monitor and remove the "Enabled by default". In the event expression, use the parameters - these should be pretty straight forward.
Afterwards, override the rule/monitor for the two servers on which you wish to monitor this event.
This is pretty rough description, let me know if you need it more detailed.

Loss of WiFi and in 'Event: Module' = Path: C:\Windows\System32\IWMSSvc.dll

re: Thinkpad W540 20BG 0016US Win 7 [64] Pro (So called WORKSTATION) - What am I doing wrong?
In my event log:
WLAN Extensibility Module has stopped unexpectedly.
Module Path: C:\Windows\System32\IWMSSvc.dll
Lenovo installed Access Connection (no version number displayed on splash and no 'about'), but digging for the file, says v6.11 in c:\SWTOOLS\readyapps\accon\setup.exe
There is no quick emergency disconnect from the WiFi..... if a web site is malicious and locks you to a script..
I have no idea what is happening. No WiFi lights, No WiFi switch, Software version hidden from the user ..... On my previous Workstation I saw what was happening.
So, any hints from users that resolved this WLAN issue?

Nuke the proprietary internet handlers and let Windows deal with it.
Get Rainmeter with a network monitor to watch your bandwidth usage.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Event 41 Kernal Power Windows 8.1

Similar Messages

Maybe you are looking for