Event Alerts Limited to 2 Days

iPhone Calendar Event Alerts limit you to 2 days before the event. This creates an incompatibility/inconsistency with Mac iCal Events, which let you choose any interval. Anyone have any work-arounds for this?

I have the same problem: I would like to set event alerts earlier than 2 days but it seems impossible...

Similar Messages

  • As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars

    As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars, and have not installed new hardware or software. What else could be causing this, and how do I fix it? This is critical!

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Ical limitation with all day events

    I fill up my calendar quite a lot with all day events. The space allowed for the events is limited so some events don't show. There should be a stretchable bar to allow visibility or not.
    I wonder how to pass on this suggestion to Apple.

    Agrr, I couldn't find how to delete this question. As often when i get to ask a question i get the answer. My events don't disappear, they are there and there is a scroll bar that shows when i scroll in the all day event part.

  • Why isn't my iPad 2 giving me alerts for my all-day events?

    Why isn't my iPad 2 giving me alerts for my all-day events?  I have alerts set-up for 2 days prior.  My alerts work for other calendar entries where they are set-up for 15mins prior.

    The laptop has a more powerful wifi radio then the iPad. Try getting closer to the location where iPad can connect.

  • Can't change alert time for all day event

    I have an ipad 4, iOS 6.1.3.  When. I set up an all day event and I want to be alerted the day before, the time for the alert is 9am and I can't change it.  I went into the settings to make sure there wasn't a default set, and there wasn't.  Is this just the way it is and I either take it or leave it?  Thanks for your help.

    You are correct - you can modify whether to receive an alert for an all day event, and, if so, how far in advance.  But once you have chosen to receive the alert the day before the event, the 9AM time is not modifiable.  I even checked on iCloud and on my Mac, and the same is true there.
    (It turns out that other things that cannot be done on iPad, for example, create a repeating event on, say, the third Tuesday of each month, can be done on the Mac or in iCloud and then will function correctly on iPad.)
    Anyway, if you would like to provide feedback to Apple, here's how:
    Apple Feedback

  • Check Event Alert failed with error - No errors in the log file.

    Hi All,
    I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
    I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
    When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
    Checking the output file (empty) log file (no errors)
    What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
    Thanks!
    M

    Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
    I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
    Thanks,
    Hussein

  • Property Manager: PN_LEASE_MILESTONES_ALL (Check Event Alert)

    Hi,. I tried to configure the Check Event Alert to Property Manager (PN_LEASE_MILESTONE_ALL), in the documentation , I read that I must configurate ORACLE ALERT, but  I don´t find some documentation about it.
    I did an Event Alert, but i cant merge the Milestone Template with Alert, by that I mean when the table PN_LEASE_MILESTONE_ALL is updated or inserts rows, the notifications email is ok, but any information about the template uses:
    Action Due Date
    Lead Days.
    Responsible User
    Type
    Frequency
    Begin Date
    So, Can you help me?

    Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
    I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
    Thanks,
    Hussein

  • How can I adjust event window size while in day view on ical?

    How can I adjust the all-day event window size while in day view on ical?  I have thee all-day events, but they're just a little too big to simultaneously appear without having to scroll up/down the all-day event section.

    {Ctrl + Scroll wheel} does a Page Zoom and that setting is saved domain by domain.
    '''View > Zoom > Reset''' while you're viewing one of those zoomed-out pages in the SmartZone.
    https://support.mozilla.com/en-US/kb/Page+Zoom

  • How to create event alert for particular column get updated

    Hi every one.... plz help me
    How to create oracle event alert when particular column is update. plz help me.... Acutually i need email alert when ever list price for an item column in pricing table get updated+... plz. Its urgent.

    Oracle Event alert is based on update of specific table and not on specific column in table.
    However you can create a trgigger on table which is based on updat of column. And in this trigger you can send a mail using plsql.
    HTH

  • All Day events in Calenday spans two days

    I mentioned this earlier, but thought I'd repost it into it's own discussion.
    I've noticed that most (all?) of my all day events show up just fine in iCal (for a single day), but after syncing to my iPod - the iPod shows these all day events spanning over to the following day.
    I just did a fresh iPod restore the other day so even if that did fix it - it was very very temporary.
    And yes - at the time I checked that option to over write the data on the iPod.

    No time zone issue here either. Strange. Just one of those things we will never know...
    My lame fix?
    List the event I want for "all day" at 3:00am. Then later, when I feel like it, go to iCal and change them to All Day. Course, that only works if you never move it in Outlook again (for example, it I move the all day event from Thursday to Friday it will once again, become a two day event in the iPhone).
    Maybe someone at Apple could just fix this during a lunch break...I will even pay for the lunch!

  • All-day events in iCal become 2-day events on iPhone

    Since I updated to 1.1.2, all my all-day events in iCal become 2-day events on the iPhone. Has anyone else had this problem? I can reset the end time on the iPhone, but I have lots of recurring monthly events and it would take forever to do this manually.

    I have the very same issue. I solved it once somehow but now it's back. I use Plaxo to sync between Outlook-iCal-iPhone and maybe that somehow has confused the phone. Let me know if you find any solutions. I will do the same.

  • Can I set my macbook to install updates at a specific time? My internet is limited through the day but between 2am and 7am it is unlimited?

    My internet is limited through the day and I want to know if I can set a specific time for updates to be carried out to make sure my macbook is working efficiently.

    Yes. When you get a notification that an update is available, select "Try Tonight". That will constrain the update to occur between 2:00 and 5:00 AM.

  • Table used in Event Alert

    Hello everyone,
    Is is possible to use a custom table (a table I created) for being used in an Event Alert?
    I tried, but when I wanted to enter it in the Event Details, the table was not in the List of Values.
    Thanks!

    Hi,
    Please see the following documents.
    Note: 103418.1 - Beginner's Guide: Create a Custom Event Alert to Fire against a Custom Table
    Note: 106642.1 - How to Save an Event Alert Calling a Custom Table in a Custom Application
    Note: 60879.1- How To Setup Custom Oracle Alerts On Custom Applications
    Note: 153113.1- Custom Event Alert not Firing
    Regards,
    Hussein

  • Issue w/ the Phone. The event alert is off. How can I fix this?

    When I set an event on my calendar and I leave an alert for 5 mins to notify me before my event starts. Before it would alert be 5 mins before the event. Now it alerts me 5 mins after the event ends and in the event alert it says (ADK). How can I fix this problem? Thanks!

    Go into Settings > General > International > Calendar and change it to Gregorian.

  • I want to set up an event that repeats every 3 days that is timezone independant. Is it possible?

    I want to set up an event that repeats every 3 days that is timezone independant. Is it possible?

    It is possible to have multiple libraries in a single account and use each one for a different iPod without affecting the other. To create or access a second (or more) library, hold down the Option key when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
    Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library but if you are only going to update your Dad's iPod periodically this shouldn't be an issue:
    Using multiple iTunes libraries -Mac

Maybe you are looking for

  • How can I disable iMessages from going to my iMac?

    I recently upgraded to Mountain Lion. Since then, iMessages won't be delivered to my iPhone. They always get delivered to my iMac. This is especially annoying because I'm not home most of the day and texting is a primary means of communications, part

  • ERecruitment:  Unregistered Application Wizard (hrrcf_a_reg_applwzd_unreg)

    We have an issue where if you provide URL of application group to candidate, adn you have not registered, you get logon after filling in personal information (First, Last, Email Address x 2).  The candidate record is created, but the application wiza

  • DBMS to XML file using XSD for validarion rules

    Hi All, I am working on a migration project and my goal is to generate XML file (should also validate using XML Schema) from MySql and SQLServer database. Idea is to write a query and then visually map result fields to XSD file (for basic field valid

  • T430 keyboard flex?

    I recently got a T430 and noticed there is some flex on the left side of the keyboard, and also in the area of the trackpoint. It makes the keys there sound slightly more "hollow" than on the right side where there is no flex. It's a minor issue but

  • Simple question about segments

    Good afternoon, I am reading the Oracle Database Concepts and I want to make sure that I've understood correctly. A segment may only contain physical data for ONE and ONLY ONE schema object. In other words, there cannot be a segment that would have 1