Event-based report

Hi,Good morning everybody!
Is there any information about how to deal with report on Event-based or how to dispose report on timing.
Thanks!

Hi,
You can take a look at the "Publishing Reports" manual Chapter on "Event driven publishing"
http://otn.oracle.com/products/reports/htdocs/getstart/docs/A92102_01/pbr_evnt.htm#1005558
(download whole manual - pdf)
http://otn.oracle.com/docs/products/reports/content.html
Navneet.

Similar Messages

Need help on event based report scheduling on webi 3.2

Hi All,
I need to add/remove trigger events on scheduled report instances.
I have around 100 scheduled report instances and want to add a event trigger.
I do not want to reschedule all the instances one by one with new event trigger.
Is there any way that i can add event trigger to all the instances at once ?
Thanks,
Alorika

Hi
Can you please tel me hoe to view these report properties in R3.
If I go to schedule, It allows to set a new schedule but I want to view the existing settings.
Please guide.
Thanks ,

Training & Event Management - Reports

Dear Guru's
I am implimenting TEM for my client for the first and am very new to the module. I have completed the configuration and testing.
ISSUE: now when i try to extract a report based on feedback/Appraisals via PD/TEM - infosystems, i am only getting the header of the reports. Once i double click the template name only its leading to show the ratings and feedback.
this will not work for my customer. i need a report which can extract the ratings per business event.
Is there any way i can get these reports output in Grid format, similar to OM n PA reports and extract to an excel??.
It will work for me even if i can get event wise report with all the ratings and feedback and if it could be extracted into a spreadsheet. as year end there would be a analysis done on the performances of the trainings conducted and attendees.
Request you all if there is any standard process to get the expected details. if not...help me with some process that can be induced to get the expected.
Apprecaite your quick responce.
THanks in Advance.
Priya R

Hi Sandeep,
i used S_PH9_46000451 as advised in the forum and this only gives the header info but not the individual ratings per event or employee.
learn that FM HRHAP_DOCUMENT_GET_DETAIL can be used to get the appropriate report with ratings.
Correct and help me if i have to do any thing else to get the result.
Thanks,
Priya

Events of reports

hi gurus,
what are events in reports and when there are triggering.

HI
Event related to reports are not triggered based on any statements in ABAP.
The event are triggered depended on the way the output is generated .
Initialization : triggered when the report is loaded in memory.
At selection-screen output : triggered when the selection screen is loaded in memory before being displayed.
At selection-screen / <field> : before leaving the selection screen.
start-of-selection : the first event for displaying the report.
end-of-selection : after the start-of-selection is completed.
classiscal report events.
top-of-page : every time a new page is started in the list.
end-of-page : every time the list data reaches the footer region of the page.
interactive report events.
top of page during line selection : top of page event for secondary list.
at line-selection : evey time user dbl-clicks(F2) on the list data.
at pF<key> : function key from F5 to F12 to perform interactive action on the list.
Initialization : triggered when the report is loaded in memory.
At selection-screen output : triggered when the selection screen is loaded in memory before being displayed.
At selection-screen / <field> : before leaving the selection screen.
start-of-selection : the first event for displaying the report.
end-of-selection : after the start-of-selection is completed.
classiscal report events.
top-of-page : every time a new page is started in the list.
end-of-page : every time the list data reaches the footer region of the page.
interactive report events.
top of page during line selection : top of page event for secondary list.
at line-selection : evey time user dbl-clicks(F2) on the list data.
at pF<key> : function key from F5 to F12 to perform interactive action on the list.
events in reports
events of reports
check the above threads
Sail

WHAT ARE SUBEVENTS OF DIFFERENT EVENTS IN REPORTS ?

WHAT ARE SUBEVENTS OF DIFFERENT EVENTS IN REPORTS ?
BEST REGARDS,
RYAN

hi,
output events are.........
start-of-selection.
using this event we can genarate basic list.
end-of-selection.
we can use this event also for genarating basic list
top-of-page.
this event is related to list, we can use this event to providing list header.
end-of-page.
this event is related to list, we can use this event to providing list footer.
if our program reading data from logical database, in that case GET and
GET LATE events triggered to genarate report.
interactive repotrs.
we use AT LINE -SELECTION and AT USER-COMMAND events to genarate secondary events based on user actions.
TOP-OF-PAGE DURING LINE-SELECTION EVENT, provides page heading to all secondary lists.
PBO and PAI events also used to genarating list.
regards,
AshokReddy.

Priority events in reports

what is the seq of events that will trigger in reports

Event related to reports are not triggered based on any statements in ABAP.
The event are triggered depended on the way the output is generated .
Initialization : triggered when the report is loaded in memory.
At selection-screen output : triggered when the selection screen is loaded in memory before being displayed.
At selection-screen / <field> : before leaving the selection screen.
start-of-selection : the first event for displaying the report.
end-of-selection : after the start-of-selection is completed.
classiscal report events.
top-of-page : every time a new page is started in the list.
end-of-page : every time the list data reaches the footer region of the page.
interactive report events.
top of page during line selection : top of page event for secondary list.
at line-selection : evey time user dbl-clicks(F2) on the list data.
at pF<key> : function key from F5 to F12 to perform interactive action on the list.
Initialization : triggered when the report is loaded in memory.
At selection-screen output : triggered when the selection screen is loaded in memory before being displayed.
At selection-screen / <field> : before leaving the selection screen.
start-of-selection : the first event for displaying the report.
end-of-selection : after the start-of-selection is completed.
classiscal report events.
top-of-page : every time a new page is started in the list.
end-of-page : every time the list data reaches the footer region of the page.
interactive report events.
top of page during line selection : top of page event for secondary list.
at line-selection : evey time user dbl-clicks(F2) on the list data.
at pF<key> : function key from F5 to F12 to perform interactive action on the list.
events in reports
events of reports
check the above threads
plz reward if found useful
Message was edited by:
p498863

Extremely slow performance in comparison to RDC-based report

Today our application uses the Crystal Reports RDC. In the last
ten years we have made good experience with Crystal Reports.
In the next few months we want to migrate our application to
JAVA.
Because the reports offer a great reuse-potential, we would like
to implement them via CR4E.
But during the first benchmark tests we made a very bad experience.
Running (Printing) in CR4E the reports needed from 20 up to 480 percent
more time in comparison to the RDC-based reports.
When using POJOs need from 25 up to 570 percent more time.
When printing the reports from within the CR2008 designer there is
no performance difference.
The reports have from 4 to 82 pages.
We didn´t expect such a huge performance difference.
Is CR4E in general slower than the RDC-based Crystal Reports?
Or are there any parameters in CR4E in addition to the RDC-based
solution for tuning the reports?
Edited by: Rainer Graedtke on Nov 9, 2009 2:44 PM

Hi Ted,
thanks for the fast response.
Is there another "datasource option" with better performance than POJO?
In the upcoming JAVA-version of our application we would like to "feed"
our reports from memory, not from the underlying database.
One more statement concerning our performance problem:
In our reports we make extensive use of subreports.
Each report has the minimum of two subreports, one for the pageheader,
one for the pagefooter.
This is necessary because we have changing headers and footers
depending on the contents of the details.
The report with the largest performance loss contains 29 subreports!
RDC-based it prints in 10 seconds, Java-based we need over 50 seconds.
Is there any suggestion how to improve the performance of our reports in
JAVA/CR4E other than reducing the number of subreports?
Another question concerning the keycode-problem:
We have designed the reports in the CR2008 Designer and we want to run
them under CR4E. Is this a valid approach?
Sincerely Rainer
Edited by: Rainer Graedtke on Nov 10, 2009 10:51 AM

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

Running a Dynpro-based Report as a Job/in Background mode

Hello,
i've got a report which hasn't got a selection-screen as its startscreen, but a complex dynpro and is based on different start-buttons and not only the "basic" F8/Run-Button. the users still would like to be able to run the report in background mode and as an automated weekly job. moreover they want to use their own configuration/variant for date-fields etc., just like they are used from a selection-screen. is this possible "out of the box" with a dynpro-based report or how can i archive this through my own programming logic?
thanks for your help,
dsp

Hi,
I guess yes, but since you seem to have several processes possible at startup (those buttons), you will have to code a new bit of code at the start of your application. This to choose the correct process... you should have a new statement like
IF sy-batch IS NOT INITIAL.
"Perform batch process
ELSE.
"Perform normal run
ENDIF.
For the variant, I'm not sure to really get the idea... Do the users already use variants with the actual version? or is there no selection screen at all? If not, you should use one and set-up parameters to pre-fill your dynpro fields...
Kr,
Manu

How can I use Server level variables in a business model based report

hi gems..
I have declared one server level variable in the BI Analytics repository.
Now I have made one business model based report.
In one column I want to use that server level varible.
I go to the formula tab of that column and then clicked on variable--> session --> put the name of the variable and click ok.
But when i viewed the report, it is not showing the dates, rather it is showing the date format I chosed i.e DD-MMM-YYYY.
please help..

actually the previous problem got resolved...
Now when I am trying to apply a filter on a particular column using that server variable, then it is showing that the varible has no value definition.
I have clicked on the filter tab of that column-->add-->variables-->session variables-->then I put the name of the variable-->click OK.
the following error is comming-
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 23005] The repository variable, Variable_name, has no value definition. (HY000)
I have made that server variable from manage-->variables-->(right click) create new initialisation block-->gave the name and wrote the query and aslo gave the connection pool name and test that and it worked fine..

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

Key figures in Cost elemnt based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

Key figures in cost element based report

Dear All,
I have created a Cost Element based Report for the Project using report painter. In this same report, I want to pull a key figure(the key figure is 'remaining forecast planned costs") which is coming from cost forecasting report (Report 12CTC1 from transaction CJE0).
The issue is this 'key figure' is not available for report made in report group 6P3(report group for cost element based report). Is there anyway I can pull this particular key figure in my report.
Thanks in advance !
Regards,
Mahendra Dighe

Also if you're using HR data, the employee data is time dependent, so that for each employee number there are any number of records. This may be causing the aggregate reporting condition that you mentioned. In BW it's important to recognize that the master data also can play a role in how many records are returned. The infoprovider is not the only source of additional records. For example:
Employee has three records in the time range.
Salary infoprovider has only one.
Results will contain THREE records, one for each employee record, all with the same salary record. On an aggregate basis, the salary results will be multiplied by three.
Time dependent master data can be a source of much confusion. For some HR reporting, I have created a 'most current' employee master data record that is not time dependent, and is loaded daily. I then use that for data models such as salary or other separate infoproviders.

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

I need help with my event-based cue points with audio

Im having trouble with my video game project for my action script 3 class at school. Here is what i did, i made a game called Tailgate toss up. I filmed my character and rendered it in Adobe Premiere. I than brought my .mov file into After Effects and I put event-based cue points-
my first cue point at 0:00:03:13 called "loop"
my second cue point at 00:00:03:27 called "draw"
my third cue point at 00:00:05:24 called "bang"
my fourth cue point at 00:00:13:29 called "dead"
my fifth cue point at 00:00:14:29 called "You Lose"
my last cue point at 00:00:19:14 called "End"
Here is my action script 3 code
///first frame:
start_btn.addEventListener(MouseEvent.CLICK, startGame);
function startGame(event:MouseEvent){
gotoAndStop(2);
SoundMixer.stopAll()
stop();
///second frame:
stop();
var loopTime
var hitHim:Boolean = false;
var vConnection:NetConnection = new NetConnection();
vConnection.connect(null);
var vStream:NetStream = new NetStream(vConnection);
var client:Object = new Object();
client.onCuePoint = onCuePoint;
vStream.client = client;
var myVideo:Video = new Video(418, 480);
myVideo.y = 0; ///this adjusts where the video is, right now it is the size of the canvas which is 418,480
addChild(myVideo);
myVideo.attachNetStream(vStream);
vStream.play("michelle.flv");
var throw_bottle:Sound
throw_bottle = new Sound(new URLRequest("audio/throw_bottle.mp3")); //change to button noise, will add sound into ae file
target_mc.addEventListener(MouseEvent.CLICK, shoot);
target_mc.buttonMode = true;
target_mc.visible = false;
draw_mc.visible = false;
function onCuePoint(cuePoint:Object):void {
   if(cuePoint.name == "loop"){
loopTime = cuePoint.time;
    if(cuePoint.name == "draw"){
var randomLoop:Number = Math.random()*10;
if(randomLoop > 2){
vStream.seek(loopTime);
}else{
setChildIndex(target_mc, numChildren - 1);
setChildIndex(draw_mc, numChildren - 1);
target_mc.visible = true;
draw_mc.visible = true;
if(cuePoint.time == "5:24"){
draw_mc.visible = false;
target_mc.visible = false;
if(!hitHim){
vStream.seek(15);
if(cuePoint.name == "dead"){
vStream.close();
myVideo.clear();
gotoAndStop(3);
if(cuePoint.name == "end"){
gotoAndStop(3);
function shoot(event:MouseEvent){
throw_bottle.play();
hitHim = true;
///my third and last frame
playAgain_btn.addEventListener(MouseEvent.CLICK, playAgain);
function playAgain(event:MouseEvent){
gotoAndStop(2);
SoundMixer.stopAll()
stop();
When I have no audio it works perfectly, no problems. When I bring audio in i re-render it as a .mov file and bring it back into After Effects and add the cue points to it. Than i re-render it out again as a flv file. When i bring it into my flash project it will work when the looping variable does just one loop and my target will appear so you can click on it or not. But when the looping variable makes it loop 2 to 10 times it skips over the catching (the part of the clip if you clip the button) and goes directly to the dropping of the can, not giving you the option of clicking the button. So basically it skips the "draw" or second cue point of my game and goes to "You Lose" cue point.
Any suggestions?

Hi,
The latest audio driver for your machine is on the following link.
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59649.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Event-based report

Similar Messages

Maybe you are looking for