Event Collector in SAP BW 7.0?

Hi All,
i want to know where can i setup the event collector in SAP BW 7.0. as in BI 3.5 we can find it in Tool-> event collector in RSA1. but in BI 7.0 it is not there. can somebody point me to the right direction?
thanks in advance,
ALden

Thanks, i already use the rsa1old transaction and implemented the event collector. but is there a way in BI7.0 without going to the old gui? i mean is there a new transaction or new link to it?
thanks
ALden

Similar Messages

Difference between process chain and event collector

what is the difference between process chain and event collector and also plz explain about metachain.In what scenarios they are used.
Many Thanks,

hi,
have a look at these help docs
Process Chain:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
Event Collector:
http://help.sap.com/saphelp_bw30b/helpdata/en/c1/6c0538c7cb583ae10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/6e/192756029db54192427cf6853c77a7/content.htm
Creating an event colector:
http://help.sap.com/saphelp_bw30b/helpdata/en/45/253d3873130057e10000009b38f842/content.htm
regards
sham'm

Process chains and event collectors

Hi All,
I need help in Process chains and event collectors.I joined in new project and this client using process chains and event collectors and they ask me to work on these areas.I didnt work on this as of now So please send any docs on this area and explain the procedure and technology methods behind this concept.I would really appreciate If someone can send me the full documentation on this concept as I couldnt find any any docs on this.
Thanks,
Ras

Hi Ras,
Process chains are a sequence of processes to be performed. The are put together in a chain with the necessary dependancies (process A needs to finish before B can start) and conditions (if A and B are successful then C else send an email), and then scheduled. They usually revolve around processes related to data loading: Load, activate, roll up, compress etc.
Please take a look at this links/threads for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
process chains
process chains
Process chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
Process Chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
Re: Ho to make a variable mandatory or optional?
There are lot of threads available in the SDN....go through them.....hope it really helps you in getting understand what are process chains and Events included in that.
Assign points if it helps you.
Regards,
Sreedhar

How to create event/notification in SAP using PI.

Hi there,
How to create the event/notification in SAP that triggered by the PI system. Any suggestion appreciated.
Thanks

Hi Mistry
You call a bapi to add the event message to SAP EM.
Below an example:
SAP EM ABAP - Calling a BAPI to create an Event Message in SAP Event Management - Code Gallery - SCN Wiki
Best regards
Eduardo Chagas

Upgrade from Training and Events managment to SAP LSO

Hi,
We've upgraded from Training and Events management to SAP LSO 604 and during that process we have run the execute booking relationship harmonization node in IMG.
We still have references to Business event groups and Business event type in themaster data catalog instead of Course groups and Course types. Are we missing something?
Thanks,
Swathi.

Hi Swathi,
You have not missed anything, they resemble the same both in TEM & LSO so dont worry.
Go Ahead >>>>>>>>>>>>>>
Regards
Rafi

Implement custom.js in Generic Event Collector

Sentinel Log Manager 1.2
Collector: Generic Event Collector
Hello,
sorry for this low end question, but I'm going crazy. I try to
implement a custom.js to get some data into CustomerVar fields.
My problem, if I start with simple code and implement the file like
described here http://tinyurl.com/cgvtaab. If I checked my Sentinel Log
Manager no additional data was writen to the event record. I stripped my
code to a realy simple example, to exclude errors here:
Collector.prototype.customInit = function() {
this.protoEvt.CustomerVar21 = "test log";
return true;
Record.prototype.customPreparse = function(e) {
return true;
Record.prototype.customParse = function(e) {
return true;
The collector runs in "custom" execution mode.
Thanks for help
Michael
michaelkuerschner
michaelkuerschner's Profile: https://forums.netiq.com/member.php?userid=6939
View this thread: https://forums.netiq.com/showthread.php?t=50155

Hi folks,
Couple quick things:
1) You were absolutely correct to put your code in customInit() as you
originally did - commenters are correct that the init code is only run
on startup, but in this case what you're doing is modifying the static
global protoEvt, which is the template on which all subsequent Events
are based. If you do run through this in the debugger, then what you
should see is that immediately after the 'curEvt = new
Event(instance.protoEvt)' line in main.js (which should be at the bottom
of your assembled Collector), your 'curEvt' global variable should have
that CustomerVar21 set in it. Further, when you get to the Event.send()
bit, the Event you are constructing should have that pre-set. You can of
course look at the protoEvt object in the debugger as well to make sure
that it actually was modified by your customInit().
2) I saw that you actually did call out that you set Custom execution
mode, but you did not mention AFAIK that you did the 'Add Auxiliary
File' step to upload your edited custom.js into the Collector. Can we
assume you did that?
BTW, just a tip on the debugger: read through:
http://www.novell.com/developer/plug...tor_debug.html
Note the bit about scrolling to the bottom of your file to find the main
loop - this is where all the action happens, so put your breakpoints
there (typically).
DCorlette
DCorlette's Profile: https://forums.netiq.com/member.php?userid=323
View this thread: https://forums.netiq.com/showthread.php?t=50155

Network Policy Server Event ID 6272 not being forwarded to Event Collector.

Hi there
I have configured an Event Subscription to collect events from 2 DCs that run RADIUS for network switches. It appears the events are being forwarded okay, I am getting the Security events (Logon and Logoff) on the event collector PC. However I am not getting
any of the Network Policy Server security events (specifically Event IDs 6272), to centrally audit RADIUS logins to switches.
The subscription is collector initiated, and I have added Network Service to the Event Log Readers Group. Is there something I am missing in the setup requirements for these events to be forwarded?
Thank you,
Kind regards
Hylton

Hi Gabriel101,
Could you offer us more information about your environment, such as what edition server you are using, whether your AD and NPS role on the same server, whether your NPS working
properly now, whether you can receive others security auditing.
The related KB:
NPS Local Log File Status
http://technet.microsoft.com/en-us/library/cc735386(v=ws.10).aspx
Event ID 6272 — NPS Authentication Status
http://technet.microsoft.com/en-us/library/cc735388(v=ws.10).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Event Collector versus process chains

In a BW upgrade project from BW 3.1 to BI 7 we have all data load processes in BW managed with old feature "event collector".
A very important question : this old feature will continue to manage our data loads in BI 7 or we need obligatorely to create process chains ???
Thanks in advance
Andreas

Hello,
The event collector will work, but you should migrate all to the process chains.
Regards,
Jorge Diogo

Event Collector

Hi Guru's,
I have two events in Event Collector scheduled using one of the user ID. Now that ID is blocked and i need to reschedule the same with my ID. How do i proceed. Please suggest me some ways .
Regards,
Harish

Hai log off from the locked user session and use your id and trigger should work if not take basis help to unlock from previous session and then start as usual.
Goodluck.

Create event to start sap business workflow

Hi all,
I'd like to raise an event in java webdynpro which starts a business workflow.
The Workflow already exists, There is a ESS with java webdynpro, which uses floorplan manager. When an employee enters some data in the ESS and clicks on the "Save" button, an event should be raised by the appplication (to start a business workflow)
My problem is, that I don't know:
-How to raise that event in java webdynpro?
-Where to raise that event in java webdynpro?
I've already modified the view, and it works perfectly (If the user clicks on the "Save" button, the entered data transfered to the SAP system.) The application is using the floorplan manager, and I can't find the "Save" button, therefor, can't raise the event, when the user clicks on it

I've already found that description. I set up the FPM in the portal. I registered a new event :
Event type = Save
EventID = "SAVE"
Description = "Save the infotype"
I have a Business Object, in the R/3 system which has an event called ".ON_CHANGE_INFOTYPE" This event starts a workflow.
My question is: How can I start this workflow??
The process should be something like this:
User clicks "Save" on the portal -> The FPM creates the "SAVE" event -> the SAVE event invokes the ONCHANGE_INFOTYPE_ -> the ON_CHANGE_INFOTYPE starts the workflow.
So what should I do? Create the event in the embended view and catch in in the onSAVE method? How can I start the workflow int he R3 system from the java webdynpro portal?

Event trigger in sap pi 7.3.1

Hi
I looking standard approach on below requirement .
1. Requirement : All failed messages needs to post to JMS adapter using Event trigger , when message failed in SAP PI.
2.Audit log : In SAP 7.3.1 I need to post message audit log to JMS adapter using Event trigger (Start time / End time ) without using BPMs.
Please suggest on this.
Thank you
Inder

Hi Inder - Regarding the audit log - have a look at the below blog
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/09/michals-popi-tips-audit-logs-from-a-native-ws--new-feature (1)
For the alerting , either you can use above suggested approach or have a look at the below blog
Customize E-Mail Body and Subject in Alerts in SAP PI 7.31 – Java Stack Only – Part 1 – ESR (2)
May be you can merge both of them, after reading the alerts(2) make another soap call to get the audit log entries(1) and send it to JMS adapter..
Of course it's not an event based instead it works based on polling Interval that you configure in the channel..

Event handling in SAP R/3 CIC

Hi,
I am working on CIC modification ( SAP 4.6 -- its R/3 CIC not CRM) , where in the FM CIC_START_FRAMEWORK
I could see the framework and the different components Subscribing to events like :
ACTION_CONFIGURE
ACTION_EXECUTE
GLOBAL_CONFIG_MOD
OK_CODE
Could someone explain where exactly these EVENTS are maintained/configured and briefly on how this event handling is designed in CIC.
Regards,
Abhilash.T

Hi Florian,
Thanks a lot for the response, few more points :
1. How the user action on the CIC screen are linked to the events ..(any configuration done for this??).
2. Will the Call back functions will be acting as the event handlers.?
3. If custom events are to be maintained in CIC , where it can be configured ,,ie should we call FMs
CIC_EVENT_SUBSCRIBE , CIC_EVENT_RAISE explicitly inside the program or can they be configured?
Thanks in advance,
Regards,
Abhilash.T

Triggering events in Non-SAP Applications

Hi All,
We have implemented Knowledge Management and Collaboration using EP 6.0 SP14 , KMC SPS14 and TREX 6.1.
We are in need to implement the following requirements:
1. <b>When a document is approved in KM, the same has to trigger event(s) in other Non-SAP applications</b>
(ie. an exisiting Java application).
Kindly let me know , if this is possible and if so how ?
Thanks & Regards,
venkat.

Hi Venkat,
I will read and reply.
Meanwhile XI Forum is at
Process Integration (PI) & SOA Middleware
Regards,
Piyush
ps: please mark all useful answers.

Windows Event Collector - Built-in options for load balancing and high availability ?

Hello,
I have a working collector. config is source initiated, and pushed by GPO.
I would like to deploy a second collector for high availability and load balancing. What are the available options ? I have not found any guidance on TechNet articles.
As a low cost option, is it fine to simply start using DNS round-robin with a common alias for both servers pushed as a collector name through GPO ?
In my GPO Policy, if I individually declare both servers, events are forwarded twice, once for each server. Indeed it does cover high availability, but not really optimized.
Thanks for your help.

Hi,
>>As a low cost option, is it fine to simply start using DNS round-robin with a common alias for both servers pushed as a collector name through GPO ?
Based on the description, we can utilize DNS round robin to distribute workloads and increase fault tolerance. By default, DNS uses round robin to rotate the order of RR data returned in query answers where multiple RRs of the same type exist for a queried
DNS domain name. This feature provides a simple method for load balancing client use of Web servers and other frequently queried multihomed computers. Besides, by default, DNS will perform round-robin rotation for all RR types.
Regarding DNS round robin, the following article can be referred to for more information.
Configuring round robin
http://technet.microsoft.com/en-us/library/cc787484(v=ws.10).aspx
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Life and work events in my sap erp 2005

hi,
BP used My SAP ERP
i do find workset related to life and work events in the BP. I also find various links in the workset to view LWE namely Benefits, Birth/Adoption, Change Status etc. But when I click any of these links they do nt show any Life and work events.
IT shows me a screen with road map select template --> fill parameters --> edit roles --> set deadlines --> edit basic data.
It shows some sort of editor that has public folders and private folders, and some stuff.
Below is an error message saying '
Cannot retrieve process template: No active version of the given development object exists'.
Can any one guide me as to what needs to be done here and how to proceed and confidure LWE.
Appreicate any help.
regadrs
Sam

SPRO -- > PErsonnel Management --> General settings --> Homepage for Self-services -- > Services -- > Assign services to sub areas.
Assign the LWE services to the LWE sub area here.
These are the standard entries in the system. Suprised that you do not have them ( Assuming that u do no thave them)
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_BENEFITS
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_BIRTH
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_BIRTHCHILD_DE
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_BIRTHCHILD_US
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_CHANGESTATUS
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_DIVORCE
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_FIRSTDAYS
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_MARRIAGE
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_MATLEAVE_DE
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_TERMINATEEMPLOYMENT
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_TERMINATION_DE
EMPLOYEE_LIFEWORK_SUBLIFEWORK_2005     EMPLOYEE_LIFEWORK_TERMINATION_US

Event Collector in SAP BW 7.0?

Similar Messages

Maybe you are looking for