Event created twice

Good day Experts.
I'm changing my bank details in ESS. During the save, the event CREATED for object BANKDETAIL is created twice. In SWEL, the time when both events are created is the same. I've also checked the SWEC and SWETYPV. The event is only activated in SWETYPV.
This problem has been bothering us for a long time.
Regards
Makoro Manyathela

Good day Rick.
Yes. The event is triggered twice. When u activate the trace and display it you can see that the event is being triggered twice. The changing of bank details is done in ESS.
See extract from the trace.
Duration Obj. name Op.     Recs. RC     Statement
1.402.174 ZAJNB0962 Server      1      0 ZAJNB0970 ZAJNB0962_ZED_12 Server HRXSS_PER_READ_P0009_ZA 928 255
100.653 ZAJNB0962 Server      1      0 ZAJNB0970 ZAJNB0962_ZED_12 Server HRXSS_PER_EDIT_P0009_ZA 1.447 455
870.759 ZAJNB0962 Server      1      0 ZAJNB0970 ZAJNB0962_ZED_12 Server HRXSS_PER_GET_F4_VALUES 36.166 417
524.162 ZAJNB0962 Server      1      0 ZAJNB0970 ZAJNB0962_ZED_12 Server HRXSS_PER_MODIFY_P0009_ZA 1.836 1.481
      318 ZAJNB0962 Server      1      0 ZAJNB0970 ZAJNB0962_ZED_12 Server HRXSS_PER_CHECK 566 225
      399 ?          Client      1      0 ZAJNB0962_ZED_12 ? Client SWW_WI_CREATE_VIA_EVENT_IBF 5.366 6
      434 ?          Client      1      0 ZAJNB0962_ZED_12 ? Client SWW_WI_CREATE_VIA_EVENT_IBF 5.913 6
    3.901 ZAJNB0962 Client      1      0 ZAJNB0962_ZED_12 ZAJNB0962_ZED_12 Client ARFC_RUN_NOWAIT 1.427 697
    4.645 ZAJNB0962 Client      1      0 ZAJNB0962_ZED_12 ZAJNB0962_ZED_12 Client ARFC_RUN_NOWAIT 1.427 697
        0 ZAJNB0962 Server      2      0 ? ZAJNB0962_ZED_12 Server ? 0 0
I'll wait for the response.

Similar Messages

Subtype event not triggering and supertype event triggers twice!!!!!!

Hi,
We have created a subtype for object bus2030 and also an event created for that. My workflow should trigger whenever an inquiry is created.
I've maintained this as triggering event in SWDD and done type linkage is SWE2 and everything looks fine.
When i simulate or create event the WF is triggered but when create inquiry in VA11 WF does not triggers.
I've checked SWEL for event trace but no event is triggered at all... Am i missing something... I've done almost everything that i used to do...
Even synchronized buffer!!! nothing paid me a solution...
Infact the same was working with 3.1i system but after migration to ECC6 we had to create new WF template for the same Process.
Now I also see that the supertype bus2030-created event is triggered twice but, obviously no receiver type exists. But the zbus2030 event is not being triggered at all!!!!
Kindly help me understanding my mistake...
Regards,
PB

Hope you have already set the deletegation in SWO6.
Now, event dont get triggered automatically, jus because they are defined in object. They have to be explicitly published in thesystem.
Check for a suitable user exit in your transaction, which makes use of function module to create the event, from that you know how to proceed.
If you dont find user exit, try other triggering techniques such as change documents, logistics, BTEs... etc.
regards,
Sandeep Josyula

Events created on iPod touch don't sync to iCal

I've been trying to sync events created on my iPod touch with my laptop iCal to no avail. I've called Apple customer service twice and they haven't been able to help. When I'm in iTunes, I designate the iCal calendar that I want touch-created events to sync to, but the events never appear in that calendar. I've created new, empty calendars in iCal to try to get events to appear there, but nothing. Events sync to my iPod touch from all my iCal calendars, though. This one-way synching isn't a good thing. Help me please!!

I'm having the exact same problem. Did you ever find a solution. Any changes to my calendar made on my iPod Touch do not sync to my iCal calendar that is designated in the Info tab in iTunes.

Performance issue : itemRenderers created twice

Hi,
I have a big performance issue with my flex app.
I have a repeater whose repeated items contain a Tree.
I noticed every of those tree elements where created twice (I
call a static incremental counter on their creationComplete event).
Does that symptom make you think of any problem I could have
in my code ?

First, Repeater is not a good choice if you have many complex
elements because it renderers all off the items. How many items are
you repeating? (what is the length of your dataProivder?)
Second, I suspect your methodology for analyzing the
instantiations. I have not see such a behavior. You might post a
sample app that demonstrates the problem.
Tracy

How to trigger event CREATED for Bus.Obj BUS2126003 (Vendor Settlement)

Hi
I want to start a workflow inside Agent Business, when Vendor Settlement (BUS2126003) is Created.
The problem is that the event does not get triggered when Created. Not even the CHANGED event is tiggered during change.
Currently I have workflow on the objects BUS2144001 (Customer Settlement - Agency Business )
and BUS2100001 (Settlement request list - Agency Business). Both these objects gets triggered when created (EVENT = CREATED).
I try to find out a way to trigger CREATED for Vendor Settlement. Do you have any suggestion for this?
I've tried to find any exits, Badi's, ...from where I could trigger the event myself.... but with no good result...
Best reg
Henrik

Hi HA,
are you talking about ERS (Evaluated Receipt Settlement) in SRM?
If yes, check with the settings in IMG, there is an ERS flag in Vendor master record that needs to be set for that vendor.
Hope it helps.
Aditya

Excise Invoice created twice for same billing document.

Hi All
Excise Invoice ( J1IIN ) has been created twice for same billing document in 1 or 2 cases.
How is this possible,if possible what is the config to restrict the same.
Thanks in advance
Samson

I dont think its possible to EI twice wrt: single billing document.
EI created wrt: Invoice which is created wrt: Delivery document. Then there will be only one material document with movement type 601. Through which qty will get updated in Rg1 register.
This document once utilized, cant used again.
re-check billing document, which billing document you are using & their settings in IMG.
Regards,
Reazuddin MD

Time zone compatability problem with timed event created on iOS and pushed to Windows7 Outlook calendar for sharing

Hi, I am in Jerusalem time zone. My Windows7 LAPTOP time zone is set to it (UTC+02:00 Jerusalem). My iPhone5 and iPad are both "Set Automatically" (ON) to Jerusalem. When I create any new event in my outlook on my Laptop it's generated with the Jerusalem time zone and pushed properly via iCloud to my iPhone and iPad. However when I create a new timed event on either my iPhone or iPad. or even in iCloud calendar (in a browser) the event is pushed to outlook on my Laptop in a "Beirut" time zone. Now that both Jerusalem and Beirut are on the same time zone (UTC + 02:00) it doesn't create any problem (though I prefer to see that the pushed events are indeed in Jerusalem time zone and not Beirut...). However, at and around day time saving change days there are problems of events created on iOS devices or even in iCloud (using browser) and pushed to outlook at the wrong times (1 hour earlier or later, depends on the change direction in Jerusalem time...) with a Beirut time stamp.
How can I resolve this problem and make sure all timed events, created on iOS devices at a Jerusalem time zone, appear as such after pushed via iCloud to my windows7 Outlook calendatr? Thanks!

I also have this issue (iPhone 5). Outlook needs to be configured properly in that timezone option needs to be selected. Which is challenging enough.
However the bigger issue for me is that when I open the ICN file:
1. I have no way to accept decline etc.
2. When the event is populating the calendar in the wrong time I can neither cut and paste nor select and move. It is totally static.
So for every meeting request I have to ensure it populates the right time as per my time zone. and if it doesnt i have to manually enter a second meeting 'X' hours earlier/later depending on which time zone the meeting was generated in.
I spoke to Apple. Their solution is make sure Outlook is properly configured. Fine...but good luck. I need a work around that is Apple based. Because this *****.
They said they would send to the development team. I am not holding my breath.

Events created on iPhone don't appear in iCal on my computer...

...but events created on the computer do appear on the iPhone. I'm using iCloud and other functions (e.g. Photo Stream) work fine. I've browsed the community for suggestions, but keep ending up reading articles from 2007 or 2008. Thanks in advance for your assistance!

MacBook Pro (15-inch Late 2008), Mac OS X (10.7.3), 2.66 GHz Intel Core 2 Duo, 4 GB mem
OS 10.7.3
I was able to solve the problem through a combination of two suggestions in the troubleshooting advice provided in the like you sent: turning off and then back on the Calendars box in System Preferences/iCloud, then restarting the computer. Works fine now, but it's scary to watch all of your calendar events disappear after you uncheck that box!
Thanks!

Events created on iphone over a week into the future do not sync with mac

Hello,
I have the following problem: whenever I create an event on iCal on the iPhone (2.2.1 3G), this newly created event sync backs fine to iCal on my mac (macbook running 10.5.6), as long as it occurs within 7 days into the future. Any events that lie more than 7 days into the future will not sync back from my iphone to the mac.
Example: today is 3/3. Any events create on the phone for 3/3, 3/4 ... 3/9 WILL sync back to ical on my mac. Events for 3/12 do NOT sync. Events for 3/10 8am did sync, but 11pm did not. Forget about your dental appt 6 months from now. As if there is some arbitrary "7 day in the future" cutoff.
I called phone support, thinking there may be a hidden setting or so that I overlooked, and that was utterly useless. The Apple rep suggested to look in the app store for an application that might fix this. "Besides", he said, "nobody creates events more than 7 days in the future". ***?
Looks like a bug to me, but maybe I overlooked something.
Can anybody confirm this behavior?
Is there any setting that I can try?
Any procedure that I should try?
ny other suggestions?
Thanks much!
Erik

Before i began syncing calendar events over the air with my MobileMe/former .Mac account, I synced contact info direct with iCal on my Mac via the iTunes sync process. I had no problem syncing events created more than 7 days in the future with the direct sync with iCal on my Mac, and I don't have this problem syncing calendar events over the air with my MM account.
I believe there is a setting under the Info tab for your iPhone sync preferences for syncing calendar events. I no longer have this available for my iPhone sync preferences since I'm syncing calendar events over the air with my MM account. I know the setting includes an option for syncing events in the past, but I don't recall if it included an option for syncing events in the future. There should be a setting for syncing all events. Is this selected?
There is also a setting on the iPhone for syncing all events, or events 2 weeks back, or 3 months back, but nothing for limiting syncing events in the future such as limiting this within the next 7 days.

Calendar events created on iphone do not sync to ical...

I have created several events on my iphone calendar then watched them disappear when performing a sync with my laptop. I have gone to itunes, hi-lited my iphone (when mounted) then gone to "info" tab in itunes, I've selected "home" where it says "Put new events created on this iphone into the calendar" (pull down menu)
None of these phone-created-events end up in "home" or "work" or any of my other calendars. My laptop ical overrides anything on the phone and deletes it. Is there something else I should be checking or setting? I have the most current version of iphone software that's been offered (1.1.4). I would like to be able to put an event in there and have the sync work both ways.

Never mind. For some reason it just worked. I guess I really meant it this time.

Event created on iPhone does not appear in iCal

When I create an event on my phone and sync, it does not appear in iCal. Events created on my laptop sync without issue. Contacts sync both ways, but calendar events do not go from the phone to the computer. I am not using MobileMe to sync, simply using the USB cable.
I have tried the following to resolve my issues:
* Make sure iTunes and iPhone are up to date
* Make sure all calendars are set to sync with iTunes
* Try different USB ports on the laptop
* Restart phone and computer
* Reset sync history in iSync and re-sync
* Follow directions in this support article: http://support.apple.com/kb/TS1627 to do a full reset of sync history and re-sync
Yet after trying all of those solutions, I still cannot sync events created on my phone to my laptop. Does anyone out there know of anything else I can try that might work?
Thank you,
Cameron

After a trip to the genius bar, I found how to solve this problem, at least for me:
0) Plug in iPhone
1) Start iCal
2) Export all calendars (File -> Export)
3) Quit iCal
4) Delete all calendars from ~/Library/Calendars
5) Start iCal
6) Import all exported calendars
7) Start iTunes, configure syncing to overwrite calendars on phone
8) Sync iPhone

How do I send an Event created in Calendar on my iPad2 via e-mail?

How do I send an Event created in Calendar on my iPad2 via e-mail?

Hello, light diva.
Thank you for visiting Apple Support Communities.
Here is an article that walks you through the process of sending calendar invites.
Invite others to an event
http://support.apple.com/kb/PH4706
Cheers,
Jason H.

Calendar Event : event created in Pre2 cannot sync to exchange

Event created in Pre2 exchange 2010 calendar, is visible in Pre2 only, but cannot see the same event when checking calendar in the same exchange account in PC. Have tried 'Sync Now' in pre2, no use.
But when new event is created in PC exchange, the event is visible in Pre2.
How can I resolve this issue ?
Post relates to: Pre 2 p102ueu (Unlocked EU)

Hello and welcome to the forums...
Has this worked before? If it has worked before, has anything changed from the last time it was syncing?
What I would try is removing and re-adding the Exchange account to the device. Just to be sure, you may want to remove the exchange account from all apps on the device and restart it. Add the Exchange account back to the calendar app and test the process again.
If it worked before and now its not, or if has never worked... you may want to check with the Exchange Admin to see if anything has changed on the server side. Exchange controls the device preferences most of the time.
Let us know what's happening. Hope this helps...
Cola

Events created on my iPhone 5 calendar are no longer syncing with iCal.

Events created on my iPhone 5 calendar are no longer syncing with iCal on my Macbook Pro (Lion OSX). It works fine the other way around.
I can't understand why, and cannot find a solution. Please help!

You can no longer sync via iTunes. That method of sync was removed (and the 1000+ post thread is arguments over things tangientally related to that).
You need to sync via other means than iTunes, then.
One option is to use iCloud. If you sign into iCloud on all your devices, and then make sure your calendars are in the "iCloud" section on your devices, they should sync.
If you don't want to use iCloud, you could use Google calendars, they operate much the same way (but may be less reliable).
Or if you use Exchange for work, you could sync that way.
Or if none of those are acceptable, you could install OS X Server and set up the calendar server on your local network and use it to sync. This is fairly straightforward "for setting up a UNIX calendar server" but it's not trivial and beyond the scope of a forum post to explain it all

Terminating event 'Created' in ABAP OO context

Hi,
I need a little help here. A lot of times I have used terminating event ‘Created’ for different BOR types – and asynchronous tasks where users are asked to create an object using call transaction from a work item.
Now I am struggling with the same in ABAP OO and have an issue:
The goal is to have a terminating event raised on a custom class - and received by a work item if a customer is fully created, that is the general part, the company code part and the sales area part.
Raising the event is working great. I have put in a class in trx. SWEC together with a function module which set the class as object type if the condition is fulfilled.
Then in trx. SWED I have entered another function module to set the key for class together with object_por-catid = ‘CL’.
Then when a customer master record is created I can see in the event trace that the event is raised with the correct key.
No I want to receive the new object into my asynchronous dialog task. I define the event as terminating event – and in the code call transaction XD01.
When the work item is created I find a waiting event linkage in trx. SWE3 – of cause without key; this is unknown until after creating.
But after executing the workitem and raising the event the workitem does not receive the event and is therefore not completed.
Is this approach not possible in ABAP OO – or do I miss something in the class definition / coding?
The event is defined as public instance – I have not coded any event handler method.
Thanks,
Claus.

Hello Claus,
Interesting question, unfortunately not with a simple answer.
The issue is that you are waiting for an instance event without a key. Your object raises an event with a key => No match.
If you raise the created event without a key, you won't be able to match up two near-simultaneous creations with their corresponding work items. Same thing if you wait for a static event.
So how does SAP do it with BOR events? By breaking the rules of course!
They do some hidden trickery to bypass this problem by doing an 'Export to Memory' of the work item ID, and the CREATED event raising code bypasses the usual event linking mechanisms and looks for it's creator by retrieving the memory variable. I don't have the exact spots of code in my head, but a bit of debugging should find it.
So what can you do? Given that you have full control of the class you could do something similar and maybe also create some kind of temporary key consisting of the Work Item ID and raise an event with that, or you could maybe skip the transaction concept completely and run the create GUI entirely within your WF step - maybe a custom screen gathering the initial data and then create the object via BAPI. Time to get creative!
Hope that helps,
Mike
Edit: Or you could do the quick and dirty solution and just use the BOR events for the step and instantiate the class during the binding back to WF...

Event created twice

Similar Messages

Maybe you are looking for