Event date does not agree with photo dates in the event

Mavericks 
Iphoto 9.5.1
I have made a new event and put lots of genealogy pictures for one family member in it.  I changed all the photos to Jan 4, 2002.  These are docs, pics, obits, etc. Thus I have given this one person this date.  Other family names  have another date.  I modified all the original files within each event.
Beside this couples name on the "Event" label it says Jan 3, 2002 - August 23, 2014.  Therefore it shows itself in the Jan 3, 2002 group of people.  That is about 20 family groups up the page.   
I have done the following:
     --Made sure that there are no pictures with the date Jan 3, 2002 in the event
     --Have taken all the pictures in the event and separated them out into new events--census, certificates, pictures, obits, etc.  Thought I would trick the event to restarting! 
     --Did a "select-all"  of that event and created a new event--same thing.
     --Closed down iPhoto and started over again.
I have no idea why the Jan 3, 2002 is showing up.  These are one side of the family.  The January 4 is the other side!
On August 23, 2014, I did take a couple of the cemetery pictures in this event.  However, they were given the new date of January 4 and Modified the original files using the checkbox.  I put the same picture in another family member's event and it is OK.  I
Hope I have given enough details.

I think I have solved it!  After much frustration and then writing for help, I was not to be stopped.  I kept looking up other helps and one person suggested that one of the pictures might be a problem.  So I tried that approach.  I made an event just out of the "possible" problem pix (the August  2014 date.)  It was not causing a problem in another event, however.   From that  event with the same pix, I exported the pix to the desktop, and then imported the pix back into iPhoto.  Then I put them into the event that was having the problem.  So far so good.  The date of the event matches all the dates of the photos.  I will now delete the "problem children."
Maybe this will help someone else. 

Similar Messages

  • BW:  Data Packages Selected number does not agree with transferred

    Hi,
    I am running into an issue with an existing master data text load process chain in Production.  The extractor is from ERP and there are only 159 records.  What is happening is the chain is stuck on yellow but there is an issue with the data packages.  The status error message is 'Missing data packages for PSA table'.  Clicking into the Details tab the message then states Data Package 1:  arrived in BW; Processing:  Selected number does not agree with transferred.
    The version is BI 7.0.  I have done the following steps and still no luck.  Looking for any suggestions.  Thanks.
    ERP
        SM37 (Job always finishes)
        SM58 (No IDOCS stuck)
        ST22 (No short dumps)
    BW
        SM58 (No IDOCS stuck)
        SM37 (Job always finishes)
        ST22 (No short dumps)
    Reactivated Datasource:  RSDS_DATASOURCE_ACTIVATE_ALL
    Reactivated Transformation:  RSDG_TRFN_ACTIVATE

    Hi
    Just check whether source system connection is ok in RSA1.
    if it is fine then have a loo at the below thread(last post)
    Data Load from R/3 to BW-'Selected number does not agree with transferred'
    Regards,
    Venkatesh

  • Graph Data does not align with the axis label

    Hi,
    The graph data does not align with the axis label when
    datetimeaxis is used.
    http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
    (in the using parseFunction property example) when you hover on the
    line graph the values do not align on the labels. Is this a bug?
    Can somebody help me with this.
    Thank you,
    Gautam.

    Hi All
    Thanks for looking into it.
    Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
    So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
    But that change has not reflected in BW yet even after replicating datasource.
    I hope i have made you all understand the situation.
    Thanks for your help
    Ishi

  • Error  " Selected numbers does not agree with transferred"

    Hi,
    While in production support I got a issue saying
    Error  " Selected numbers does not agree with transferred"
    How to solve this.
    Regards
    San Reddy

    Hi,
    This doesnt mean that its a failure.
    I will suggest you to check a few places where you can see the status
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) SM58 and BD87 for pending tRFCs.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    SM21 - Job log can also be helpful.
    In your case its probably because of tRFC issue.
    Check SM58 / BD87 for pending tRFCs.
    Thanks,
    JituK

  • Field catalog does not agree with the fields of the functional area

    G'day everyone,
    I am using a generic extractor via infoset to extract data from R/3 source system.
    Using RSA3, I have obtained an error message and no further details.
    ****ERROR MESSAGE
    "Field catalog does not agree with the fields of the functional area
    Message no. RSUQ134
    ****ERROR MESSAGE
    I have checked and adjusted my infoset in SQ02 and they seems fine but still obtain the same error.
    In BW, replicated the datasource and activate the transfer rules but still obtain the same error.
    Anyone knows how to get more details for this type of error? Or how to fix this problem?
    Regards
    Wayne

    I think I have just solved it.
    Transaction RS02 delete and recreate after checking the structure in BW and Source system are the same.
    Cheers

  • Result of agent resolution does not agree with agents of task

    Hello Experts,
       I am trying to configure a workflow for Employee Travel expense, the Business object am using is BUS2089 for event CREATED.
      And am configuring workflow task WS20000040 (Approve trip). and in the work flow builder I am assigning User as an Agent and fixing it to a user say "USER1" for Task 404 (Check trip facts) and for Task 416 (Approve trip facts) again am assigning User as an Agent and fixing it to user say "USER2"
    Now when the Trip is saved using PR05, this work flow is triggerred - which is what i want and it sends work item to USER1,  now when USER1 says Trip facts are consistent the work item should go to USER2 but here it is failing and the log says "Agent determination for step 0000000416 failed" and details say "Result of agent resolution does not agree with agents of task" which is  SWF_RUN 544
    Can you guys help me by telling where am going wrong.  Am i missing some configuration somewhere.
    I have changed the Task properties - Attributes i have changed the task as a General Task,(i did it by navigating through Control Tab of the task)
    appreciate your response.. Thanks
    Usman

    Thanks Novjot
        I made the task as a general task and i see a gree light adjacent to it, but still it doesn't work.
    the way i made it as a general task is as follows:
    1. in the navigation area - select task 416
    2. In the right hand side, on Control Tab in Task properties, click on the Red button and maintain Agent assignment
    3. In Agent Assignment change attributes to General Task - instead of General Forwarding allowed.
    save and activate, and generate runtime version
    Is this correct or any other way?
    Thanks
    Usman

  • Error: Result of agent resolution does not agree with agents of task

    Hi,
    I'm getting the error "Result of Agent Resolution does not agree with agent of Task".  I'm passing the agents in Expression which I'm getting from Method in my previous step and passing to workflow container and it is getting passed to Expression. The userid is present in that container. And the Task is assigned as General Task but still I dont know what might be the problem. The ID is with 'US' prefix. Even if I give the userid directly in the Task, it shows the same error.
    Regards,
    JMB

    Hi
    Incase you are using different clients for development and testing, make sure in testing client, task is assigned as general task.
    You may check the way the userid is passed. Please note that the US is object type and Object ID(user id) is different. Both of them should not be part of one string. So while you test, just pass the user id without a prefix US. Hope it will work for u.
    Regards
    Waz

  • Agent resolution does not agree with agents of task

    Hi Guys,
    I extended B.O-IDOCAPPL to ZIDOCAPPL to catch the inbound error for the IDOC.
    The workflow gets triggered correctly when we get the inbound error.
    In the workflow i created a custom display method....this is a dialog method. Now when the workflow comes to this point it gives the message in the technical log
    <i>" Result of agent resolution does not agree with agents of task"    </i>  
    <b>Now instead of calling this method if i just put a user decision it shows up fine in the users inbox.</b>
    I have tried SWU_OBUF , Refresh from SWUS , Refresh from Inbox
    Nothing seems to work, anyidea as to what's happening here ?
    Message was edited by:
            Abhishek Dhoundiyal

    I have tried :
    1.) hardcoding user ID
    2.) using a role
    3.) using WF initiator...
    This is set up as a general task......
    One interesting observation that i had... (If the below is irrelevant please ignore)
    If i run the task via SWUS it executes but still does not evaluate the agents.. and then if i execute the workitem in SWIA it lets me execute...
    Now if i trigger the workflow it executes but still does not evaluate the agents but it does not allow me to execute the workitem in SWIA , the technical log says workitem not found.

  • I want install an old version of itune since the new version does not sync with my iPhone  but the old version I installed did not play rather it says that it can't read a file itune library .itl written by Newer version what do Ido

    I install an old version of itune since the new version does not sync with my iPhone  but the old version I installed did not play rather it says that it can't read a file 'itune library .itl' written by Newer version of itune how do I installed this old version to work

    You need to restore the pre-upgrade backup of the library file in the manner shown in  Empty/corrupt library after upgrade/crash.
    tt2

  • I cannot add an event on my iPhone or iPad calendars. The "plus" button, or add event button does not even appear when I open the app.

    I cannot add an event on my iPhone or iPad calendars. The "plus" button, or add event button does not even appear when I open the app.

    Thanks for the suggestion. Sadly, that did not fix it. I changed the sync setting as you described, but I still don't get my older events. I have turned my IOS devices off and on again too. One more piece of information, the only events I see for October are recurring events. Either one day events like birthdays set to repeat every year, or events within the month that spanned more than one day. No one time events or appointments are showing.

  • Radio Playlist does not play with Photos

    I have created a "Radio" playlist and synced to my Apple TV (Playlist containing internet radio). It works perfectly as long as I hear it as "music", but as soon as I choose that playlist to be played in combination with Photos, it does not play (while photos are being shown). Any idea?
    Alex

    Can't say I'm surprised really.
    We didn't really have internet radio playlists until a few months ago.
    It should be straightforward to add, but I doubt it would be a high priority addition.
    Request it here:
    http://www.apple.com/feedback/appletv.html
    AC

  • Outline Agreement (Contract) data does not match with EKPO table.

    Hi,
    I have created a outline agreement(Contract) with net price as 100 / 1 Kg. But when I go to EKPO table in front of Net Price it is reflecting net price as 1 / 1 Kg. So it shows that it is dividing the net price by 100 in Table EKPO. This is happening with the currencies which are maintained in T Code OY04 (Currencies like JPY, CLP, ESP, ITL) with decimals as 0.
    Rest all curriencies which have not maintained in OY04, there is no problem in EKPO as the data matches with Outline Agreement Net Price.
    Request you to please provide the input to resolve the same.
    Thanks & Regards,
    Neeraj Singh

    Hi Neeraj Singh,
    The value of data stored in EKPO depends on the decimal places defined
    for the currency. In standard the decimal places is taken as 2 . Therefore the value will be
    the same as order price if the currency is defined for two decimal
    places ( default is 2 ).
    However, if the decimal places for JPY is defined as zero the table
    will show a value of price /100. If you choose a currency with
    3 decimal places the value in the table will be price * 10 and so on.
    Example:
    Currency                          Decimal places      Order price      Value in EKPO
    SGD                                               2               2000               2000
    NLG                                               2               2000               2000
    JPY                                               0               2000               20
    KWD (Kuwati Dinar)                     3               2000               20000
    ITL                                                 0               2000               20
    All currencies that do not have any decimal places at all
    (TCURX-CURRDEC = 0) must have EKPO-NETPR multiplied by 100.
    Please check SAP notes which may be of help to understand this issue 53206 and 137626
    The issue you reported in not an error but standard.  I hope this information is of help.
    Regards,
    Lorraine
    Edited by: Lorraine Donnelly on Jul 12, 2010 6:57 PM

  • Page data does not load with goButton? (new window of identical page)

    Hi guys. I ran into a problem. Essentially, I need to print a .jsff page but before I do, I have to alter its format a little bit. The solution I decided to use was to create a new .jspx page containing almost the exact same content. I even copied the data bindings and everything. Finally, I created a goButton on my original page like so:
    <af:goButton text="Print as BOSSMON" destination="SubmitPrint.jspx?org.apache.myfaces.trinidad.agent.email=true"
                        targetFrame="_blank">
    </af:goButton>This opens my page nicely in the format I want. But...there is no data on the page! It just opens a frame of the page. Can someone help me resolve this?
    Otherwise, is there any other technique I could use to accomplish my goal?

    Hi guys. Thanks to everyone for their suggestions. I finally got a working solution, something totally different from the suggestions.
    My goal was to print a .jsff page nicely. But before I could do that, I needed to modify some data on the page. I also wanted to do this in as few clicks as possible. I tried the goButton technique but the binding data would not load. I couldnt figure out why.
    Nonetheless, I finally managed to make my own version (albeit, not that neat!). I accomplished this by essentially making a template which automatically opens in showprintablebehavior format. I tried to follow a bunch of online tutorials/blogs but nothing worked for me. Here are the steps I used:
    1) Creating a new .jspx page.
    2) Copy the entire source of the .jsff page (the one which needs to be printed) into our new template .jspx page. (do have to modify the beginning parts by adding <af:document> <af:form> etc)
    3) Create a pageDef for the template page and copy the entire pageDef as well (do have to change the name of the pagedef)
    4) Modify your print template to your liking.
    5) Add a taskflow rule that links the original .jsff page to the new template page
    6) Add a commandButton on the original .jsff page which opens this printing page in a new window (remember to use "dialog:....."). Here is mine:
    <af:commandButton text="Open Printer Friendly Version" id="printer_popup" action="dialog:edit_print" useWindow="true"
                                  windowEmbedStyle="window" inlineStyle="display:block;"
                                  windowHeight="100" windowWidth="100">
    </af:commandButton>7) Now, in the printing template page, add a command button which simply has the showprintablebehaviour tag within it as well as a client listener to invoke some javascript. Here is what I used:
    <af:commandButton text="Printer Page" id="sha_print">
        <af:clientListener method="do_loading" type="focus"/>
        <af:showPrintablePageBehavior/>
    </af:commandButton>8) In the beginning of this page, you will have an <af:document> tag. Modify it so it sets focus to our print button above when the page loads. Like so:
    <af:document id="d2" initialFocusId="sha_print">9) Now add a resource tag to your page which has the "do_loading" javascript method.
    <f:facet name="metaContainer">
        <af:resource type="javascript">
              function do_loading(event) {
                  var target = document.getElementById('sha_print');
                  target.click();
                  top.close();
                  //alert("got focus sir!");
        </af:resource>
    </f:facet>Thats it! What this does is when you click on the command button to open the printer template, our template page opens but as it opens, it automatically sets focus to the printer button using the document tag. The printer button has a listener which activates when it receives focus (in our case, as soon as the page loads). This listener invokes the javascript method, which progamatically clicks the printer button and closes this window. What your left with is a printer friendly page of your modified page!
    All the data is present there too!
    If anyone has any questions/comments, please do ask.

  • IPhoto change time and date does not work with Flickr

    Hello everyone,
    In my iPhoto librairies, I do change my photo date and time to set them we they were actually taken. Here, I'm refering especially to photos which are:
    * scanned photo
    * stiched photo
    The issue is:
    When I share these photo on Flickr, Flickr sort them with the previous date time setting, even if I have selected to change the original file in iPhoto.
    So it is painful to end up seeing that all the work done on iPhoto is not reflected elsewhere.
    This issue can only be in iPhoto as the old date time should be swapped with the new one.
    Let me know when the fixed will be implemented so I stop loosing precious time editing photos!
    Regards,
    Francois

    I have an Access Database created with Access 2010 installed on a machine running Windows 8 using the Access 2010 Runtime code. For the most part the database works but all reports that require a date in the header come out with ##error. Works fine
    with full access on any other machine. Just this one were we are using Runtime. Any ideas?
    Make sure you don't have Date used as a Field Name, as it is a Reserved Word in Access and can cause unpredictable behavior.
    Also make sure you have compiled the VBA code, before using the Runtime version.
    Have error handling in place, to capture errors in your DB.
    Hope these pointers help,
    Daniel van den Berg | Washington, USA | "Anticipate the difficult by managing the easy"
    Please vote an answer helpful if they helped. Please mark an answer(s) as an answer when your question is being answered.

  • When I take a picture with my iphone, the date does not show when I down load the picture. Is there a way to program this?

    when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.

    Dropbox "Camera upload" option just rename the files and looks like this.

Maybe you are looking for