Event for task  not defined as start/end event

Hi all,
We get the following error in our inbox although the event seems to work as intended
Event ZIMEC006 APPROVED_REJECTED for task TS81700130 not defined as start/end event
If I go to the task TS81700130, the event APPROVED_REJECTED is defined as a terminating event(under the tab terminating events)  with objecttype BO and object ZIMEC006 and the binding is ok
What could be the problem?
Thanks for all help
Hans

Hi,
The BO your using is a custom one,
If Yes Goto the BO, Release that Event,Save and generate the BO.
other wise, if you created a Subtype of the Std. BO, check that Z-event you created is released  and the BO delegated to Std. BO, save and generate the BO.
Then try now.
Regards,
Surjith

Similar Messages

  • Event DRAW CHANGED for task TS90000016 not defined as start/end event

    Hello,
    i have created a workflow with one task, this task is of object type DRAW and the method is CHANGED. and i want to trigger this task when the status of a document changes to completed.
    Now when i change the status of a document to completed, the workflow is starting but then throwing an exception. Here is what i am getting, any ideas as to why ?
    Event DRAW CHANGED for task TS90000016 not defined as start/end event
    Event linkage with errors deactivated
    from the swel event trace i am getting the following:
    the receiver <task> started correctly,
    then i get the following:
    Receiver FM SWW_WI_CREATE_VIA_EVENT_IBF
    message: Event DRAW CHANGED for task TS90000016 not defined as start/end event
    any ideas as to why this is happening and how i can fix it ?
    regards to all the experts out there
    points are awarded.

    Hi,
       If you want the task to be executed without any agent intervention follow this:
    In the transaction PFTC_DIS OR PFTC_CHG  open your standard task and
              see whether you have checked the ' background processing' option in    
              execution category.
    It seems the "changed" method in Draw object is synchronous - so you
               dont need any terminating events.
       else
    check for the bindings in workflow and make sure you dont make any
             container with import parameter as mandatory.
       Hope this will solve the problem.
    Regards,
    Manikandan R

  • Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type

    hi all
    i made 4 workflows for MBO appraisal using APPR_DOC BO nd using std wfs- ws12300114, ws12300122, ws12300124 nd ws12300125. all r working properly in development server.
    but
    in quality all r giving errors related to evevts. as for example, for ws12300114 workflow it is giving error--
    "Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type"
    for all 4 wfs it is giving error like this related to event nd business object.
    plzzzzzzzz anybody knows thn reply or call me at 09886999122 or mail at [email protected]
    thanks in advance
    Raj

    Hi,
    Since you are saying that the object worked fine in DEV and giving problem in Quality I feel that some sort of Your Dev work was not properly included in the Transport Request and was not gone to Quality server.
    Something like EVENT activation, release status etc were not gone to Quality
    check them.
    reward if useful
    regards,
    Anji

  • "Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type 'APPR

    hi all
    i made 4 workflows for MBO appraisal using APPR_DOC BO nd using std wfs- ws12300114, ws12300122, ws12300124 nd ws12300125. all r working properly in development server.
    but
    in quality all r giving errors related to evevts. as for example, for ws12300114 workflow it is giving error--
    "Event 'INFO_APPRAISEE_CHANGE_APPROVE' is not defined for object type 'APPR_DOC' "
    for all 4 wfs it is giving error like this related to event nd business object.
    plzzzzzzzz anybody knows thn reply or call me at 09886999122 or mail at [email protected]
    thanks in advance
    Raj

    Hi,
    Since you are saying that the object worked fine in DEV and giving problem in Quality I feel that some sort of Your Dev work was not properly included in the Transport Request and was not gone to Quality server.
    Something like EVENT activation, release status etc were not gone to Quality
    check them.
    reward if useful
    regards,
    Anji

  • I am getting "Event name is not defined" in VC

    Hi,
    I am using NWDS & VC 7.2 and trying to deploy my first sample application.
    When I click the "Validate" button in "Deploy" option, I am getting the error "Event name is not defined".
    Where can I see the detailed error log to understand what is the event name which is missing?
    Thanks.
    Regards,
    Ram.

    Hi Ram,
    You can find a complete workshop, beginner to advanced here:
    [http://www.sdn.sap.com/irj/scn/logon?redirect=%2firj%2fscn%2fgo%2fportal%2fprtroot%2fdocs%2fwebcontent%2fuuid%2fa079f8d2-d0a9-2c10-eb82-937591a7c0be|http://www.sdn.sap.com/irj/scn/logon?redirect=%2firj%2fscn%2fgo%2fportal%2fprtroot%2fdocs%2fwebcontent%2fuuid%2fa079f8d2-d0a9-2c10-eb82-937591a7c0be]
    Regards,
    Netanel

  • BPM 11g - Human task not removed when interrupting boundary event fired

    In BPM 11g (11.1.1.1.3), I am testing a message catch event on the boundary of a human task. It is set for interrupting, so it should, when the event fires, remove the human task from the work list and follow the flow out of the event. The event flow is being followed, but the human task is being left active in the user's work list. I would expect the human task to be removed when the interrupting boundary message event occurs.
    I think this is a bug, but would welcome any suggestions on how to solve it. Does anyone know if this works in the latest release (11.1.1.1.4)? We might upgrade pretty soon. Has anyone else tried boundary message events and gotten them to work properly in BPM 11g?
    Just FYI....in order to make the BPM message event occur and provide instance correlation, we had to add a mediator and BPEL correlation. We followed process documented in a previous post to do this (http://blog.andrade.inf.br/2011/01/implementing-correlation-in-bpm-11gr1.html). Thanks to whomever posted that...it got us a few steps further along!

    I do not think this is bug based on
    Oracle® Fusion Middleware Modeling and Implementation Guide for Oracle Business Process Management
    23.1.1 Understanding the Relationship Between SOA Composites and SOA Components
    "In a similar way, when an interrupting timer or message boundary event arrives to a user task, the BPMN process instance leaves the user task but the associated Human Task remains available. Because the interrupting timer or message boundary event arrived before the user completes the user task, the human task remains unfinished, and you can still access it thought the Worklist application. However running that human task does not have any effect on the BPMN process."
    This also gives us big trouble. I am looking for the solution.
    Helen

  • "ReferenceError: prepareFFB is not defined" I started getting this JavaScript error recently whenever I start Firefox. I would like to stop getting this error

    I get the following JavaScript error every time I start Firefox:
    ReferenceError: prepareFFB is not defined.

    hello, this sounds like it's possibly caused by an addon. do you have any extension/theme installed, you can connect the "FFB" to? if not try disabling them all in firefox > addons > extensions & reenable them one by one to find out which of them might be causing the error message.

  • Timeline Start and Finish Dates - how to not display finish dates for tasks not added to timeline

    I have a project, Project 1, with start date 1 Jan 2014 and finish date 31 Dec 2014.  When I switch to timeline view, the timeline spans this period. I now want to create a second view for a sub project within Project 1, called Project 1A.  It
    starts 1 June 2014 and finishes 31 August. I only want to see Project 1A's tasks and time span on this second custom timeline view. I create the new view, add the tasks from Project 1A to the timeline, and save the view as CustomView1A. My problem: CustomView1A
    shows the tasks for Project 1A, but also shows the dead space between 1 Jan 2014 and 1 June 2014, as well as the dead space between 31 August and 31 December.
    I dont want to see the dead space. I want CustomView 1A's timeline to start and finish on Project 1A's start and finish dates.
    How do I adjust CustomView 1A's timeline borders on the left and right to exclude the dead space?
    Hanneliese Fourie

    Dear Sir,
    I checked in CO41 and it allows me to convert planned order to production order and not have any provision to re-scheduling the planned order . Any function to reschedule planned order to future dates ( whose start dates and finish dates are in past ) ?
    Thanks,
    SL

  • On Click event for button not firing

    Hi,
    I'm writing a portlet under Plumtree 5.0.2 and using web controls 2.1 (released version).
    I have a form that has a text box, a label, and a submit button. By cliking on the button the text from the box should appear in the label. If I run the application outside the portal everything seems to work fine, but on the portal the click event does not fire. why?
    I have my ptrender tag on the form, httpmodules in the config file, GetPostBackEventReference on Page_Load. Did I forget something?
    any advice is appreciated. Thanks
    Tania

    Tania,
    You'll need to add ptrender="true"to the button's opening tag if you want the button's server-side code to execute. Also, you won't need ptrender on the form's opening tag.
    From what I can see, placing ptrender on the form's opening tag can be used for two things:(i) when the user clicks a button (which doesn't have ptrender itself) causes the browser to return to the portal, similar to executing portletresponse.ReturnToPortal() in your server-side code.(ii) causing a third-party control to similarly return to the portal as (i) above.
    Nick.

  • Trigger Event for Task Deleted

    hi,
    I need to handle Task deletion in workflow. But there is no standard deleted event available.
    So I have created custom business object ZBUS2175 and have delegated to std object.
    Now using BSVX transaction I am trying to assign this event when status is changed to I1102. But event is not getting triggered.
    Is there any other status I need to set?
    Please reply.
    Thanks.
    HArshada

    Hi,
    The BO your using is a custom one,
    If Yes Goto the BO, Release that Event,Save and generate the BO.
    other wise, if you created a Subtype of the Std. BO, check that Z-event you created is released  and the BO delegated to Std. BO, save and generate the BO.
    Then try now.
    Regards,
    Surjith

  • Including a photo when Auto Play not clicked (Preferences Start/End)

    Captivate 8, Windows 7.
    I've included a photo to show behind the PLAY button when Auto Play is not checked. I've used this before in previous Captivate versions with great success. But now when I publish it, the photo shows up as an ugly red background. What happened to the photo? Are there photo limitations for this action?

    If the photo was a PNG it could be that the transparency setting in the graphic is causing the red background.  Try a JPG instead.

  • Unable to define Rule completely in ACTIVITY, asking for TASK definitation

    Hi ,
       I am facing the below problem, request your help.
      I have an workflow , I have to created new activity and added rule under that, When i check for syntax errors, its says that TASK not defined, When Add TASK for the same activity where rule exists, Once the TASK is added, the rule is getting Deletd.
      Kindly suggest. How to add Rule to Activity without errors without task, or is there any step to add rule alone.
    Awaiting for your response.
    With Regards,
    Poornima

    Hi,
    What BO method are you using? Is a standard method?
    There are only 2 reasons for a agent doesn't appear on your activity:
    1) If there is a (sub)workflow defined in the task
    or
    2) There is a background task.
    Try deleting the activity, use SWU_OBUF tcode and creating a new activity.
    Regards,

  • Issue in triggering events in task

    Hi,
    In my workflow there is a fork and after a fork there is a task for which triggering event is defined and this particular event is triggered from zprogram and agent for task is determined using a rule.
    In zprogram logic is written as event (triggering event for task) is triggered when all 4 users in fork presses submit button.
    Problem is when 4th user presses submit button workitem is created in workplace of agent defined for task and in 4th user as well.Workitem should not be created for 4th user.
    Please suggest.
    Regards,
    Kaustubh.

    Hi Rick,
    I have defined single task in all branches of a fork with CONFIRM END OF PROCESSING tick in task. Task is to call ztransaction.
    Problem is if all users in a fork enters into transaction and by clicking BACK comes out without pressing SUBMIT button in ztransaction and clicks COMPLETE WORK ITEM flow will go to task defined after fork which i dont want.
    Flow should go to task after fork only when user presses SUBMIT and COMPLETE WORK ITEM button.
    Hence I have created triggering event for task which gets triggered only after all user presses SUBMIT.
    Please suggest.
    Regards,
    Kaustubh.

  • Contract Value Calulation based on Start & End Time

    Hello Friends,
    My client is into Vessel Hiring & the Vessels are given on hire for fixed period (with clear start & end dates & time). 
    For the above scenario we have a Periodic Contract to BIlling cycle which generates Invoices for every month. while creating the Contract we enter Basic Price as Day-Rate (Calculation type in Condition - O - Quantity - Daily Prices)
    Thus the system automatically calculates the Basic Price Condition value based on number of days in any month.
    Now the issue here is the client wants system to take Start & End time into consideration. In the Contract header - Contract Data tab we have developed two additional fields (Z-Fields) that capture start time & end time for every Contract.
    So, we want system to calculate the Basic Price Condition value based on the Contract start date + Contract Start time.
    Example :
    1. Contract start date - 25.03.2010 & Start time = 12:00 noon. Basic Price = Rs. 10,000 per day.
    2. In the Monthly Invoice, system would calcualte the Basic Price as Rs. 70,000 (7 days i.e. 25.03.2010 to 31.03.2010)
    But here the client wants system to consider Start Time & determine Value as Rs. 65,000 as the Contract started on 12:00 noon on 25.03.2010.
    Can anyone tell me how to achieve this?
    I guess we should develop some routine (in VOFM) & apply it in Pricing Procedures.
    But can some expert guide me on the logic of the routine & exactly where to apply the same in Pricing Procedure...
    Thanks,
    Jignesh Mehta

    Hi,
    Develop routine and make combination
    if start date is xyz  and start ime is less that 12 then price is so on so
    if date start date is xyz and satrt time is more that 12 then price is so on so.
    Hello I am not ABAPer, still tried to suggest you,don't mind for my suggestion
    Kapil

  • Catching the start/end of component resizing?

    Hi Folks,
    I have a JPanel descendant and I want to store its initial size before being resized (by mouse), then at the end of resining, use this value to calculate the resizing factor.
    componentAdapter.componentResized() works fine for Windows LAFs, as it is called just once (when the mouse is released). But, using other Look and feels, it is called several times during the resize process (it can be seen also that the panel is repainted continuously).
    I tried to turn off repainting with setDynamicLayout(), but besides it did not worked at all, it looked ugly.
    My question: is there a way to get an event for determining the beginning and the end of the resizing process using any LAFs?
    Thanks,
    -meri

    Hello,
    well, who's controlling the resize? You have a mouse
    drag to do it? Then you can know on mouse press what
    the size is...Yes, a mouse drag is used to resize a JDialog which contains my component. The problem with mouse press is if it's a resizing (grabbing the border of the dialog), then no other mouse events are fired on the component (either MousePressed).
    or maintain the "current size" in a variable and
    compare that to the componentResized call and after
    done, reset the "current size" to the new size.Fine, I could do it (already done), but for special reasons, it would be much more better to calculate further sizes of the very first (initial) one.
    Thanks anyway! I will keep on searching for some solution...
    -meri

Maybe you are looking for

  • 1st gen iMac G5 won't stay up but target

    I've tried resetting the SMU but the power doesn't stay on. It comes on, as soon as the twirly lines start on the gray screen, it shuts off. However, if I start it in Target Disk mode, it comes up and stays on so it isn't a power issue. I dont have t

  • Removing subtitles from a TV Show

    Hello, I was wondering if anyone could help me figure out how to get rid of the subtitles here? Under the little "bubble" the audio option is grayed out! (Sorry the picture is mostly grey, I'm guessing it's for copyright reasons because it wasn't whe

  • How to save a chart after each iteration in a for loop?

    Hello, I have written code which initializes a spectrometer. Once initialized, if the "Capture" button is pushed, the spectrometer takes a new spectrum three times (see for loop) every second. This spectrum is displayed as a chart in my front panel.

  • Lotus Notes as DataSource

    Hello, How is it possible to extract data from a Lotus Notes database into SAP BW? Since I know too little about Lotus Notes, therefore my questions: Which way of extraction has to be chosen: UDC, or something else? Which kind of database is LN, mult

  • TS3991 I can't open several Keynote files

    I use iCloud. I get an error message that there was a problem opening the file. I have now way of accessing these files. They will not open on any of my devices: iPhone, iPad and MBP.