Event ID 1000 in Windows 2003 Server SP2 Backup Failure while trying to schedule backup job
Hi,
After run below mentioned two commands, I am able to schedule on backup Job but when I am trying to add another backup job then the same error is coming. Plz. reply with the solutions.
Cacls.exe C:\Windows\Tasks /E /G "NT AUTHORITY\SYSTEM":F
Cacls.exe C:\Windows\Tasks /E /G BUILTIN\Administrators:F
Hi,
If the issue could be resolved by these 2 commands, it seems to be a permission issue which is different as the common cause of Event 1000.
As the commands need to be performed each time creating a schedule, please check each file (task) under the folder c:\windows\Tasks and see if permissions are "inherited".
Also check the folder c:\windows\Tasks and see if "NT AUTHORITY\SYSTEM" and "BUILTIN\Administrators" are set as "This folder, subfolders and
files". It is recommended to compare the permission settings of this folder with a working system.
If you have any feedback on our support, please send to [email protected]
Similar Messages
-
Oracle 9i - Unable to set /PAE and /3GB Switch in Windows 2003 Server SP2
Hi
I was wondering if anyone had any experience on Windows 2003 Server (SP2) with setting /PAE and /3GB switches.
I am unable to set both together, setting one or the other works fine in the boot.ini.
Oracle seem to think you can set both but it causes my OS to crash/become unstable.
Has anyone set both switches together on 32 bit Windows 2003 Server successfully?
I am using Oracle 9.2.0.3 Enterprise Edition.
ThanksThe server is new. But we installed 10g before 11g was available. Then upgraded to 11g, so it is a little mess. What the oracle installer should have done in a fresh install, it is maybe not what the server has now.
I have checked for memory issues, processor issues, http errors, every EM setting and metric, and everything looks just right, but the applications are slow and the users are upset.
Anyway, thanks for the advice. Maybe we will need to re-install everything or go back to 10g on Windows 2003 Server x32. That configuration was working fine before rushing into 11g. -
Iphone 5 S can't get sync with itunes installed on windows 2003 server SP2
After successfully installed itunes 11.1.5 for windows (i'm using windows 2003 server SP2 32bit). Whenever time I connect my iphone 5S to this computer, it always pops up an error message "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again"
After I uninstalled/reinstalled many times I got successful install iTunes software, but this still having problem with this error message. When I open iTunes application and plug my iPhone 5S it always show the above error message & on iTunes application --> Files --> Devices I couldn't see any devices available (i.e Syns option is faded out & not clickable)Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant -
Bootcamp with Windows 2003 Server SP2
First of all I've got a bootcamp installation of Windows 2003 Server SP2 on my Mac Mini 2Ghz Core Duo, but until now I can't get the following:
- installation of Bootcamp software in Windows
- drivers for video and bluetooth
If some one can give me help on getting the correct software/drivers for this.
Already thanks.
Robbertgo to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
Anil Malkai -
BOE XI R2 SP3 - Does it work on Windows 2003 Server SP2?
We are using BOE XI R2 SP3 (v. 11.5.9.1076) on Windows 2003 Server (32bit) Service Pack 1. Our company needs to upgrade all Windows 2003 Servers to Service Pack 2.
According to the documentation on the web, BOE XI R2 SP3 is supported on Win 2003 Svr SP1
(http://resources.businessobjects.com/support/communitycs/TechnicalPapers/boe_xi_r2_supported_platforms_windows_sp3.pdf)
However, I can't find any information on the BOE XI R2 SP3 version running on Win 2003 Svr SP2.
Could someone please let me know if there is such information (link to web site, etc), or if from own experience, this version of BOE XI works with W2003 SP2?
If this doesn't work, what should we do next? Should we upgrade BOE XI R2 to Service Pack 4, and then upgrade Win 2003 Server to SP2, or upgrade Win 2003 Server to SP2 and then upgrade BOE XI R2 to SP4?
Any feedback would be greatly appreciated.
Thank you so much.Hi,
BOE XIR2 SP3 is supported on :
Supported Operating Systems
Desktop Products
u2022 Windows 2000 SP4 Professional
u2022 Windows XP SP2 Professional
u2022 Windows Vista (All 32-bit and 64-bit Editions)
u2022 Windows 2000 SP4 Advanced Server
u2022 Windows 2000 SP4 Datacenter Server
u2022 Windows 2000 SP4 Server
u2022 Windows Server 2003 R2 Enterprise Edition
u2022 Windows Server 2003 SP1 Datacenter Edition
u2022 Windows Server 2003 SP1 Enterprise Edition
u2022 Windows Server 2003 SP1 Standard Edition
u2022 Windows Server 2003 SP1 Web Edition
u2022 Windows Server 2003 (x64 Edition) SP2
Server Products
u2022 Windows 2000 SP4 Advanced Server
u2022 Windows 2000 SP4 Datacenter Server
u2022 Windows 2000 SP4 Server
u2022 Windows Server 2003 R2 Enterprise Edition
u2022 Windows Server 2003 SP1 Datacenter Edition
u2022 Windows Server 2003 SP1 Enterprise Edition
u2022 Windows Server 2003 SP1 Standard Edition
u2022 Windows Server 2003 SP1 Web Edition
u2022 Windows Server 2003 (x64 Edition) SP2
Hope this helps
Regards,
Shweta -
Table files and Index files 2GB on Windows 2003 Server SP2 32-bit
I'm new to Oracle and I've ran into the problem where my Table files and Index files are > 2GB. I have an Oracle instance running version 10.2.0.3.0. I have a number of tables file and index files that have a current files size of 1.99GB. My Oracle crashes about three times a week because of a "Write Fault/Failure. I've detemined that the RDBM is trying to write a index or table files > 2GB. When this occurs it crashes.
I've been reading the Oracle knowledge base that it suggest that there is a fix or release of Oracle 10g to resolve this problem. However, I've been unable to locate any fix or release to address my issue. Does such a fix or release exist? How do I address this issue? I'm from the world of MS SQL and IBM DB2 and we don't have this issue. I am running and NTFS files system. Could this be issue be related to an Windows Fix?
Surely Oracle can handel databases > 2GB.
Thanks in advance for any help.After reading your response it appears that my real problem has to do with checking pointing. I've included below a copy of the error message:
Oracle process number: 8
Windows thread id: 3768, image: ORACLE.EXE (CKPT)
*** 2008-07-27 16:50:13.569
*** SERVICE NAME:(SYS$BACKGROUND) 2008-07-27 16:50:13.569
*** SESSION ID:(219.1) 2008-07-27 16:50:13.569
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Can you tell me why I'm having issues with checking point and the control file?
Can I rebuild the control file if it s corrupt?
The problem has been going on since April 2008. I'm takening over the system.
Thanks -
Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2
Hi,
I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this.
I tried on 3 different win2003 server SP2 machines and couldn't able to install properly.
I easily installed and run this HTTP server on my Windows 7 machine. However on the other partition of my PC
windows server 2003 is installed. It didn't worked on this OS.
Once I was somehow able to install OHS on my 64 bit Windows 2008 Server, but again never:((
I got the following error messages during the install.
waiting for your answers .
ERROR1
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (instance1)
Error
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Log
Step Create and Start AS Instance (instance1) started
Deploying NonJ2EEManagement Application...
Step Create and Start AS Instance (instance1) failed
Step Create and Start AS Instance (instance1) failed
Create and Start OHS Component (ohs1)
Log
Create Shortcuts
Log
ERROR2
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (inst2)
Error
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Log
Step Create and Start AS Instance (inst2) started
Creating Oracle Instance directories...
Recording OPMN ports reservations...
Bootstrapping OPMN configuration files...
Instantiating opmnctl for direct usage...
Registering instance
Step Create and Start AS Instance (inst2) failed
Step Create and Start AS Instance (inst2) failed
Create and Start OHS Component (ohs2)
Log
Create Shortcuts
LogA few guesses what could be wrong.
- Under which user are you installing, does this user have all the rights to create and start stuff.
- Have you first installed a weblogic server (this should be installed) and did associate any components with the weblogic domain?
I usually do not associate anything with my weblogic domain and configure the httpd.conf file for the Apache server by hand instead of using the enterprise manager.
Once the WebLogic server is installed i follow the following steps
Installation WebTier
Run setup.exe
Select Install Software - Do Not Configure.
Click Next.
Prerequisite Checks --> Next.
Accept the default installation directory.
Click Next.
Uncheck i wish to... click Next (in the pop-up Yes)
Click Install.
Click when the installation it finished and click Finish
Configuration WebTier
Run the file <WebTier-Home>/bin/config.bat.
Click Next
Uncheck Associate Selected Components with WebLogic Domain and click Next
Accept the defaults and click Next
Enter the parameters for the WebCache
Web Cache Administrator Password: password
Confirm Password: password
Click Next.
Select Auto Port Configuration and click Next.
Uncheck I wish to... and click Next. (pop-up Yes)
Click Configure
Click Next and Click Finish
When i follow the above steps an instance of the webtier is running. -
Excel Export Fails in Windows 2003 Server
In my development environment, I am deploying an classic ASP web site on a Windows 2003 server (sp2).
It is exporting the crystal reports to excel.
In my UAT environment, I am deploying the same ASP web site on a windows 2003 server (sp2) R2. (Release 2).
However, it is failing while exporting the crystal reports to excel.
Both development and UAT Site is using Crystal reports XI.
The other difference between development and UAT environment is ,
Development environment is installed with MsOffice 2000 whereas NO MsOffice is installed in UAT Enviornment.
CODE: (Failing at the last line Session("oRpt").Export false )
Set crystalExportOptions = Session("oRpt").ExportOptions
crystalExportOptions.DiskFileName = application("RptEmailPath") & FileName
crystalExportOptions.DiskFileName = crystalExportOptions.DiskFileName & ".xls"
crystalExportOptions.FormatType = 21
crystalExportOptions.DestinationType = cint(1)
Session("oRpt").Export false
Please help me to sort out the issue.Hi,
This is issue was getting resolved after installing Crystal Report Service Pack II.
Go to
Start --> Programs -> Business Objects --> Crystal Reports Server --> Central Configuration Manager
The version number in this window clearly shows which version of the service pack has been installed in a system.
If it is 11.5.8.826 means system is installed with Crystal Report Service pack II.
Thanks,
Muthu T. -
WRV54G and VPN and Windows 2003 Server
Hello. I use Windows 2003 Server on my laptop and trying to establish VPN into my WRV54G. QuickVPN is not compatible with the OS, so that's not an option. I tried the manual setup and I got to a point where I had to enter the destination IP address. I use a DynDNS address and so I won't have a static IP.
I'm using firmware version 2.39.2.
Thoughts?
Thanks!First thing i would like you to check is if you are able to "ping" the WAN ip address for the WRV54G.
Also what are the settings that you have on the WRV ??? typically the remote secure group and remote security gateway should be set at "any".
In the WRV...under the VPn go to advanced VPN and sset the mode to "agressive" , enable keep-alive and netbios broadcast....
let me know if this work or let me know a few more details. -
Error launching Infoview on Windows 2003 R2 SP2 64 bits
In our Lab, just installed BO XI 3.1 on a Windows 2003 R2 SP2 32 bits AND a Windows 2003 R2 SP2 64 bits servers.
When launching Infoview on the 64 bits server, I get the following error message:
Server Error in '/InfoViewApp' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this applicationprevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application....
I did modify the web.config file for the tag: <customErrors mode="RemoteOnly"/>
When accessing Infoview after the change, I get:
Server Error in '/InfoViewApp' Application
Retrieving the COM class factory for component with CLSI {E063B04A-CB8B-460E-99D0-F7D8FA2FAAA2} failed due to the following error: 80040154
Description: An unhandled exception occurred during the execution of the current web request. Pleas review the stack trace....
I don't have any problems accessing Infoview on my 32 bits server. Same installation procedure.
I uninstalled BO on my 64 bits server and reinstalled without solving my problem.
Any ideas or experience with 64 bits envir.?
Thanks for any advice, suggestions. Wondering if I should just be going with 32 bits but we're trying to go with as many 64 bits servers in the field.
RegardsDenis,
You pointed me in the right direction. Found something in the DB knowledge of SAP (with some patience..).
I'm not too sure if it's the article ID but here's what show up next to the title: 1326978
Mainly, here's the solution:
Symptom
How to configure XI 3.1 with Win2003 64-bit using IIS
When navigating to InfoView, user receives "Server Error" message.
Server Error in '/businessobjects/Enterprise115/InfoView' Application. -- displayed for XIR2
Server Error in '/InfoViewApp/ Application. -- displayed for XI 3.x
Reproducing the Issue
Issue could occur in any 32-bit version of XI (XIR2 and XI 3.x) that supports 64 bit windows 2003 operating systems
Cause
While newer versions of XIR2 and XI 3.x are supported on 64 bit OS's they do not currently support 64 bit .net
Resolution
XI 3.1 is a 32-bit application and InfoView/CMC cannot run while IIS is in 64-bit mode. In addition, IIS cannot run in both 32-bit and 64-bit modes simultaneously. Follow these steps to change IIS to run in 32-bit mode and unregister/register the correct IIS app pools.
Open the windows command prompt and do the following:
To disable 64-bit .NET 2.0:
cd C:\windows\microsoft.net\Framework64\v2.0.50727
aspnet_regiis /u
To enable IIS to run in 32-bit mode:
cd C:\Inetpub\AdminScripts
cscript adsutil.vbs SET W3SVC/AppPools/Enable32bitAppOnWin64 1
To enable 32-bit .NET 2.0:
cd \WINDOWS\microsoft.net\Framework\v2.0.50727
aspnet_regiis /i
In IIS manager under Web Service Extensions:
ASP.NET v2.0.50727 (32-bit) (The new one that appeared when you enabled 32-bit .NET 2.0) Set to Allow.
ASP.NET v2.0.50727 (the 64-bit version that has been there since you installed .NET 2.0 framework) If it is still listed, Set to Prohibit.
Restart IIS (via Windows command prompt)
iisreset
I am now able to get to the login screen of InfoView but I'm missing the type of authentication field (Enterprise, Windows AD)
I'll take a look early tomorrow.
Thanks again.
Jay -
32bit client on windows 2003 server R2 64bit running oracle 10g release 2
Hello,
could you please help me ?
I have a windows 2003 r2 sp2 64 bit server on witch oracle 10g release 2 64 bit is installed.
So far no issue.
I need to have a 32bit client installed on the same server to be able to run some applications on the server, but my applications won't start telling me that TNS could not resolve the connect identifier specified.
my tnsnames.ora seem correct both in the db_1\network\admin directory and in client_1db_1\network\admin directory.
both Sqlplus(client_1 10.2.0.1 and db_1 10.2.0.3) return a connection.
I don't know where the problem could be coming from
Thanks a lot
Fred897790 wrote:
Hello,
could you please help me ?
I have a windows 2003 r2 sp2 64 bit server on witch oracle 10g release 2 64 bit is installed.
So far no issue.
I need to have a 32bit client installed on the same server to be able to run some applications on the server, but my applications won't start telling me that TNS could not resolve the connect identifier specified.
my tnsnames.ora seem correct both in the db_1\network\admin directory and in client_1db_1\network\admin directory.
both Sqlplus(client_1 10.2.0.1 and db_1 10.2.0.3) return a connection.
I don't know where the problem could be coming from
Thanks a lot
Fred
THANKS! for NOT supplying actual error code & message
ORA-12154?
I don't know what you have.
I don't know what you do.
I don't know what you see.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds. -
Error installing E-Bussiness Suite (EBS) R12 on Windows 2003 Server x32
I am trying to install EBS R12 and i am getting error at stage 3 of 5 on 53%
I followed steps from below link
http://supportuae.wordpress.com/2013/01/26/installing-oracle-e-business-suite-r12-on-microsoft-windows-server-2003/
My Setup
Win 2003 Server SP2 x32 *(Installed in D:\) 20 GB*
MS Visual C++ Express edition *(D:\MSVS)*
Cygwin 1.7 *(D:\cygwin)*
Acive Perl
Oracle Apps Dump at G:\
Installing Oracle Apps at E:\ with 270 GB NTFS
Installed in Administrator Login
Below is my Error log
~~~~~~~~~~~~~
Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
Step 0 of 5
Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
Processing Step 3 of 5
Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=03:12 PM )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "FALSE" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_1"
"runProcess_1"
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the install for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Installing Applications Technology Stack
Statusstring Installing Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx600M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -d G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\driver\appsts\driver\gias.drv -pwd no_password_here -log E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\log\ApplyAppsTechStack.log -nthreads 4 -verbose
Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
Checking Disk contents in - G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz
Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
Unzip Count:60
Processing Disk1....
Processing Disk2....
Processing Disk3....
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 0 == 0 goto :BITS_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_2"
"runProcess_2"
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
Statusstring Registering Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -stage G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at E:\oracle\VIS\inst\apps\VIS_ebs\admin\log\ApplyAppsTechStack_04211520.log
| 0% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
instantiate file:
source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
Step 0 of 5
Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
Processing Step 3 of 5
Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=04:30 PM )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not ""runProcess_2"" == "FALSE" (goto :"runProcess_2" ) else (goto :runProcess_1 ) )
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.logwhich version of Oracle R12 ?
these are generic errors, please check log file for details and post here error log
and also ensure that you are following proper guidelines mentioned in MOS note:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
i am using Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
i have already posted complete log from E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
Can you post link to guidelines mentioned in MOS note:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1] -
Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?
I just got a pair of new 3TB disks that I wanted to put on my Windows 2003 server enterprise x64 system, SP2, all updates installed.
When I first tried to convert to dynamic, I got the error "The operation did not complete" as described in this KB article
http://support.microsoft.com/kb/826823
It says there is a patch, but there is not one for x64, just x86 and ia64
I found another technet discussion here: https://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/cb62238c-b3d0-4989-b45a-ae6de6701a7b?stoAI=10
However its best suggestion is to use a product from AOMIE, but I tried that and it didn't even recognize the disk. It also suggests that one needs a better version of diskpart.exe and to try to the 32 bit version. Anyone have any experience
with that?
I also tried creating moving the disk to Windows 7 x64, making it dynamic there, but when I move the disk back to 2K3 it does not recognize it, and goes back to a 2TB partition. I also saw something about needing a 512 block size for 2K3, but W7 does
not allow anything smaller than 1K.Hi,
During my research, if found the following artcle which also mentioned a 3TB disk should be supported in Windows 2003 SP1:
Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a720ae72-0c04-44dd-94c0-2e6aecce530e
So I contact the author about this issue. He said it could be caused if your hard disk is a 512e drive as the 3TB drives on the market today are normally 512e drives.
However manufacturers stopping identifying this, and if the controller is old, FSUtil will not able to identify a 512 drive but recognized it as a normal 512n drive.
Thus please provide the drive model so we could search on manufacturer's website for exact information.
Also please paste the screenshot in your reply which Satish mentioned if available.
In addition, here is an article Robert provided:
http://www.windowsitpro.com/article/what-would-microsoft-support-do/support-advanced-format-hard-drives-141584 -
DLU - Zen3.2sp3 and Windows 2003 Server TS
Hey guys,
Im using Windows 2003 Server with TS installed for Citrix 4.0 running
Netware 5.1 Sp7 with Zen3.2 sp3. Are there any issues with DLU working on
this setup. At this stage its not working. Using the Novell Client 4.90 Sp2.
Policy works fine on XP Pro, Windows 2000 server and Pro.
Any help would be appreciated.
Thanks
Ramirami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Oracle 9i rac windows 2003 server
Hai,
I am planning to do oracle 9i rac windows 2003 server(enterprise edition service pack 2) installion. All the pre-requiste has been completed. At the time of running clustersetup.exe , it is exiting without showing an error. The event veiwer is having the below mentioned details.
Event Type: Information
Event Source: DrWatson
Event Category: None
Event ID: 4097
Date: 4/8/2011
Time: 3:05:13 PM
User: N/A
Computer: IBDB1
Description:
The application, C:\preinstall_rac\clustersetup\clustersetup.exe, generated an application error The error occurred on 04/08/2011 @ 15:05:13.921 The exception generated was c0000005 at address 004014C1 (clustersetup)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any idea how to resolve this issue?
Regards
SridharWindows 2003 is not listed as supported platform:
http://download.oracle.com/docs/html/A95493_01/reqs.htm#1101810
I would not try to install a desupported database version on an unsupported platform.
Maybe you are looking for
-
Can I place an clipped eps image into a PSD file?
WINDOWS CS2 Photoshop I just started using CS2 - Can I place an eps image (saved with a clip path created in PSD) into a PSD file? I used to be able to do that in PSD 7. When I place the eps file into PSD, I don't get the clip I get the entire image.
-
hi All, I want to change the selection screen for logical database PTRVP, is it possible to change it without changing the database selection program ? I tried to look out for selection category for this LDB [ like HR LDBs] but dint find any. can you
-
Downgrading from Final Cut Pro HD to Final Cut Express 4
I have Final Cut Pro HD I have chosen to go back to (or to) Final Cut Express 4. I just bought the upgrade version of FCE 4 and I am wondering if FCP HD counts as a former version of FC for the upgrade version. I haven't opened the box so I want to m
-
Forms Central / Copyright & Securing Documents
@Hi there, Forms Central I am creating forms on Form Central (which i understand will be no longer from July 2015). What I wanted to know if adobe is going to implement something different or will this service become completely obsolete? I love using
-
Automating Project Info in Preferences?
Hi, Is there any way to automate the Project Info in Preferences? It only appears when the project is open, as I create lots of videos how can I automate all the info like web address, email address, copyright info etc... instead of typing it every s