Event ID 1035

I have this event every 15min
Log Name:      Application
Source:        MSExchangeFrontEndTransport
Date:          6/10/2014 2:56:49 μμ
Event ID:      1035
Task Category: SmtpReceive
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      server
Description:
Inbound authentication failed with error LogonDenied for Receive connector Client Frontend server. The authentication mechanism is Login. The source IP address of the client who tried to authenticate to Microsoft Exchange is [127.0.0.1].

Hi Tosiadis
Thank you for your question.
By my understand , the exchange server checked the healthmailbox properties and found that there were few healthmailboxes have the different UPN.
I suggest you change the Healthmailbox UPN to a default domain name
You can refer to the following link:
http://support.microsoft.com/kb/2952691
if any questions. please let me know.
Best regard,
Jim xu

Similar Messages

Exchange 2007 a lot of event id 1035!!!!!!

Hi to all
The last two days i have start receive a lot of 1035 warnings messages in my event log.
Event Type: Warning
Event Source: MSExchangeTransport
Event Category: SmtpReceive
Event ID: 1035
Date: 25/11/2014
Time: 9:22:10 πμ
User: N/A
Computer: xxxxxxxxxxxxxxx
Description:
Inbound authentication failed with error LogonDenied for Receive connector Default xxxxxxxxxxxxxxx. The authentication mechanism is Ntlm. The source IP address of the client who tried to authenticate to Microsoft Exchange is [191.237.193.88].
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
From the http://whatismyipaddress.com/ip/191.237.193.88 i found that ip is from Mirosoft.
So far noone has complain that was unable to receive or send email.
Why i receive all of this warnings????
Thanks and regards.

Hi Vagelisr
Thank you for your question.
Event id 1035 means your exchange server cannot authenticate with the remote exchange server. Your exchange server requires authentication to route internal user messages between server, it may cause by the following three reason:
•The Exchange server is experiencing Time synchronization issues
•The Exchange server is experiencing Service Principal Name (SPN) issues
•The required TCP/UDP ports for the Kerberos protocol are blocked by the firewall.
You can refer to the following link to troubleshooting:
https://support.microsoft.com/kb/979174
If not, you can refer to the following link to modify the IP range of the default receive connector and the way of authentication:
http://www.exchangefreaks.com/EVENT-ID-1035-showing-up-on-an-Exchange-2007-Server-t135392.html
You can also create a new receive connector with the IP address of the exchange server , you can refer to the following link:
http://technet.microsoft.com/en-us/library/bb125159.aspx
If there are any questions, please let me know.
Best Regard,
Jim

Win32_NTLogEvent sometimes returns null for the Message field even though the event does contain a message

This does not happen often but it does happen. We have an application that regular runs WMI queries to collect windows events. However, on a particular machine, on particular events, the windows event description that comes from the Win32_NTLogEvent.Message
field is null. The event does indeed have a description and that can clearly be seen in the Event Viewer.
One particular event that causes the problem is
Event Type: Information
Event Source: MsiInstaller
Event Category: None
Event ID: 1035
Date:  4/21/2010
Time:  8:51:53 AM
User:  NT AUTHORITY\SYSTEM
Computer: COMP201002
Description:
Windows Installer reconfigured the product. Product Name: 32 Bit HP BiDi Channel Components Installer. Product Version: 1.1.0.2. Product Language: 1033. Reconfiguration success or error status: 0.
As you can see, the description exists. However, the field returned by WMI is null.
Any way i can diagnose the problem to see what's going on? Is this a WMI bug?

Hi markoueis, I suggest you first check these links for troubleshooting WMI as the issue can be caused by WMI on the particular machine:
http://www.microsoft.com/technet/scriptcenter/topics/help/wmi.mspx
How to troubleshoot WMI-related issues in Windows XP SP2
http://support.microsoft.com/kb/875605
You can also try restart WMI service and see the result. If this does not work, you can try the steps in the following article to rebuild repository:
WMI Troubleshooting: The Repository on Vista / Server 2008
http://blogs.technet.com/b/askperf/archive/2008/07/11/wmi-troubleshooting-the-repository-on-vista-server-2008.aspx
Hope this helps!
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

11004 error SBS Exchange 2003 SP2 with POP connector. Exchange version 6.5 7638.1

Hello
I am getting loads of errors displayed in Event Viewer Application log like:-
Event ID 1035
A error occurred in connecting to the <xxx.xxxxxx.co.uk> POP3 server for user <[email protected]>. The error is 11004. The server may be down for maintenance
or your server is not connected to the Internet.
Event ID 1023
The downloading process for mailbox <[email protected] [mail.XXXXXXXXXXXXX.co.uk]> was ended with one or more errors.
The Server has 3GB memory and 64GB free disk space on the parttiion supporting Exchange
Can anyone suggest a troubleshooting scheme?

Is this machine running SBS? Is this an error that's logged by the kludgy POP3 connector? If so, that connector isn't part of Exchange -- it's something the SBS folks added. You'll have to ask our question in a SBS forum.
Keep in mind that a POP3 server will lock the mailbox if the messages are being checked by another client (unlike Exchange which allows multiple POP3 sessions). That would cause those 1035 errors to be logged by Exchange.
When you combine the 1035 with the 1023 events it looks more like connectivity problems than an Exchange problem. You might want to use a network monitor and see if the connection's being dropped.
In any case, good luck with Exchange 2003. It's no longer supported -- but I don't think your problem is related to Exchange but to the SBS add-on software.
--- Rich Matheisen MCSE&I, Exchange MVP

MSExchangeTransport 1020 'NT AUTHORITY\ANONYMOUS LOGON - How can I identify Client?

My Exchange 2010 box is logging this error with some regularity:
MSExchangeTransport
1020
The account 'NT AUTHORITY\ANONYMOUS LOGON' provided valid credentials, but is not authorized to use the server; failing authentication.
How can identify what client is attempting this connection?

Hi,
If there is no event id 1035, I recommend you use protocol logs with log parser to check the sender IP. Also, you can use network monitor to verify this client's IP address.
Here is a helpful article for your reference.
Report Top Sender IP’s on Exchange Server 2010 using Log Parser
http://exchangeserverpro.com/exchange-2010-report-top-sender-ips-log-parser/
Note: Microsoft is providing this information as a convenience to you. The site is not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

DNS load balancing for Enterprise serevrs

Hi All
In my test Lync 2010 Enterprise environments, recently i have implemented the DNS load balancing with webservices
My environment is two lync 2010 ent servers , 1 SQL server, 1 Monitoring + Archive server (Same Box)
The below steps was performed from me for DNS load balancing.
PLEASE NOTE: NO HARDWARE LOAD BALANCING IN MY SETUP
Create a Host record for the Pool name with respective front end servers
Pool name : Pool2.doitnow.com with 2 lync 2010 enterprise servers named lyncfe01n.doitnow.com (192.168.1.5) and lyncfe02.doitnow.com (192.168.1.6)
Two host A records in DNS as POOl2 with IP of 192.168.15 and 192.168.1.6
1. From the Lync Server 2010 program group, open Topology Builder.
2. From the console tree, expand the Enterprise Edition Front End pools node.
3. Right-click the pool, click Edit Properties, and then click
Web Services.
4. Below Internal web services, select the Override FQDN check box.
5. Type the pool FQDN that resolves to the physical IP addresses of the servers in the pool. in
(my case it is Pool2.doitnow.com )
6. Below External web services, type the external pool FQDN that resolves to the virtual IP addresses of the pool, and then click
OK. ((my case it is Pool2.doitnow.com ) - is that REQUIRED ?
7. From the console tree, select Lync Server 2010 , and then in the
Actions pane, click Publish Topology.
IS THERE ANY THING TO BE DONE APART fROM ABOVE POINTS
Now
what i did is. in lyncfe01n.doitnow.com - i have disabled the network card and try to login lync 2010 client , but not succeesfull
my assumption is, it should work via lyncfe02.doitnow.com, since load balanace in DNS is in already in place
do i need to open / firewall rule to be creany port in second lync server
here is the below seqeunce of event viwer from lync
Log Name:      Lync Server
Source:        LS User Services
Date:          1/14/2014 3:34:31 PM
Event ID:      32108
Task Category: (1006)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Pool Manager changed state of Registrar with FQDN: lyncfe02.doitnow.com to Inactive.
======
Log Name:      Lync Server
Source:        LS User Services
Date:          1/14/2014 3:35:01 PM
Event ID:      32109
Task Category: (1006)
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Pool Manager changed state of Registrar with FQDN: lyncfe02.doitnow.com to Active
====
Log Name:      Lync Server
Source:        LS Routing Data Sync Agent
Date:          1/14/2014 3:50:58 PM
Event ID:      48003
Task Category: (1058)
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
The Routing Data Sync Agent has initiated a sync cycle with: [pool2.doitnow.com]
=====
Log Name:      Lync Server
Source:        LS User Services
Date:          1/14/2014 3:56:21 PM
Event ID:      32108
Task Category: (1006)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Pool Manager changed state of Registrar with FQDN: lyncfe02.doitnow.com to Inactive.
===============
Log Name:      Lync Server
Source:        LS File Transfer Agent Service
Date:          1/14/2014 3:56:45 PM
Event ID:      1008
Task Category: (1121)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Failed to read Central Management database information from AD connection point. Microsoft Lync Server 2010, File Transfer Agent will continuously attempt to retrieve this information.
While this condition persists, configuration changes will not be delivered to replica machines.
Exception:
Microsoft.Rtc.Management.ADConnect.ADTransientException: Active Directory error "-2147016646" occurred while searching for domain controllers in domain "doitnow.com": "The server is not operational.
Name: "doitnow.com"
" ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryServerDownException: The server is not operational.
Name: "doitnow.com"
---> System.Runtime.InteropServices.COMException (0x8007203A): The server is not operational.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at System.DirectoryServices.ActiveDirectory.PropertyManager.GetPropertyValue(DirectoryContext context, DirectoryEntry directoryEntry, String propertyName)
   --- End of inner exception stack trace ---
   at System.DirectoryServices.ActiveDirectory.PropertyManager.GetPropertyValue(DirectoryContext context, DirectoryEntry directoryEntry, String propertyName)
   at System.DirectoryServices.ActiveDirectory.Domain.GetDomain(DirectoryContext context)
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.GetDCForDomain(String fqdn, NetworkCredential networkCredential)
   --- End of inner exception stack trace ---
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.GetDCForDomain(String fqdn, NetworkCredential networkCredential)
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.DiscoverDC()
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.ReportDownServer(String serverName, ADServerRole role)
   at Microsoft.Rtc.Management.ADConnect.Connection.ADConnection.MarkDown(LdapError ldapError, String message)
   at Microsoft.Rtc.Management.ADConnect.Connection.ADConnection.AnalyzeDirectoryError(DirectoryException de)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.AnalyzeDirectoryError(ADConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find(ADObjectId rootId, String optionalBaseDN, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCreator, CreateObjectsDelegate
arrayCreator, Boolean includeDeletedObjects)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find(ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCtor, CreateObjectsDelegate arrayCtor)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find[TResult](ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.GetTopologySetting()
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.GetBackEndServer()
   at Microsoft.Rtc.Xds.Replication.Common.Utils.TryGetConnectionPointFromAD(String& sqlStorePath, Exception& exception)
Cause: Possible issues with configuration or AD access.
Resolution:
Ensure that activation is completed and AD is accessible from this machine.
   at Microsoft.Rtc.Xds.Replication.Common.Utils.TryGetConnectionPointFromAD(String& sqlStorePath, Exception& exception)</Data>
====================
Log Name:      Lync Server
Source:        LS Master Replicator Agent Service
Date:          1/14/2014 3:56:45 PM
Event ID:      2014
Task Category: (2122)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Failed to read Central Management database information from AD connection point. Microsoft Lync Server 2010, Master Replicator Agent will continuously attempt to retrieve this information.
While this condition persists, configuration changes will not be delivered to replica machines.
Exception:
System.ApplicationException: Domain "doitnow.com" cannot be contacted or does not exist. ---> System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException: The specified domain does not exist or cannot be contacted.
   at System.DirectoryServices.ActiveDirectory.Domain.GetDomain(DirectoryContext context)
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.GetDCForDomain(String fqdn, NetworkCredential networkCredential)
   --- End of inner exception stack trace ---
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.GetDCForDomain(String fqdn, NetworkCredential networkCredential)
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.DiscoverDC()
   at Microsoft.Rtc.Management.ADConnect.Connection.DirectoryServicesTopologyProvider.ReportDownServer(String serverName, ADServerRole role)
   at Microsoft.Rtc.Management.ADConnect.Connection.ADConnection.MarkDown(LdapError ldapError, String message)
   at Microsoft.Rtc.Management.ADConnect.Connection.ADConnection.AnalyzeDirectoryError(DirectoryException de)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.AnalyzeDirectoryError(ADConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find(ADObjectId rootId, String optionalBaseDN, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCreator, CreateObjectsDelegate
arrayCreator, Boolean includeDeletedObjects)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find(ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties, CreateObjectDelegate objectCtor, CreateObjectsDelegate arrayCtor)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Find[TResult](ADObjectId rootId, QueryScope scope, QueryFilter filter, SortBy sortBy, Int32 maxResults, IEnumerable`1 properties)
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.GetTopologySetting()
   at Microsoft.Rtc.Management.ADConnect.Session.ADSession.GetBackEndServer()
   at Microsoft.Rtc.Xds.Replication.Common.Utils.TryGetConnectionPointFromAD(String& sqlStorePath, Exception& exception)
Cause: Possible issues with configuration or AD access.
Resolution:
Ensure that activation is completed and AD is accessible from this machine.
===============
Log Name:      Lync Server
Source:        LS Inbound Routing
Date:          1/14/2014 3:56:46 PM
Event ID:      45005
Task Category: (1037)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Unexpected exception occurred in the Inbound Routing Application.
======================================
Log Name:      Lync Server
Source:        LS User Services
Date:          1/14/2014 3:56:53 PM
Event ID:      30975
Task Category: (1006)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Encountered a connection failure while executing a request against the back-end.
Back-end: sql.doitnow.com\rtc
Log Name:      Lync Server
Source:        LS User Services
Date:          1/14/2014 3:56:53 PM
Event ID:      32134
Task Category: (1006)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Failed to connect to back-end database. Lync Server will continuously attempt to reconnect to the back-end. While this condition persists, incoming messages will receive error responses.
Back-end Server: sql.doitnow.com\rtc   Database: rtc Connection string of:
driver={SQL Server Native Client 10.0};Trusted_Connection=yes;AutoTranslate=no;server=sql.doitnow.com\rtc;database=rtc;
Cause: Possible issues with back-end database.
Resolution:
Ensure the back-end is functioning correctly.
=================
Log Name:      Lync Server
Source:        LS User Services
Date:          1/14/2014 3:56:53 PM
Event ID:      32112
Task Category: (1006)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Pas with FQDN: Pool2.doitnow.com has been detected to be down.
=================
Log Name:      Lync Server
Source:        LS User Services
Date:          1/14/2014 3:56:54 PM
Event ID:      32098
Task Category: (1006)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Failed processing conference status requests. This error might delay the freeing up of PSTN meeting ids in conference directories homed on this pool.
Error code: 0x800407D0
Cause: Possible issues with back-end or Lync Server health.
Resolution:
Ensure the Lync Server service is healthy.
===========
Log Name:      Lync Server
Source:        LS User Replicator
Date:          1/14/2014 3:58:33 PM
Event ID:      30022
Task Category: (1009)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
The connection to domain controller DC01.doitnow.com appears to have been terminated. The domain controller could have gone down. User Replicator will attempt to reconnect to an available domain controller for this domain.
=====
Log Name:      Lync Server
Source:        LS File Transfer Agent Service
Date:          1/14/2014 3:58:43 PM
Event ID:      1035
Task Category: (1121)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      lyncfe01n.doitnow.com
Description:
Failed to register with back-end database. Microsoft Lync Server 2010, File Transfer Agent will continuously attempt to reconnect to the back-end. While this condition persists, no replication will be done.
The Connection string: Data Source         = sql.doitnow.com\rtc;
                Database            = xds;
                Max Pool Size       = 5;
                Connection Timeout = 60;
                Connection Reset    = false;
                Enlist              = false;
                Integrated Security = true;
                Pooling             = true;
Exception: [-1] Could not connect to SQL server : [Exception=System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.Rtc.Common.Data.DBCore.PerformSprocContextExecution(SprocContext sprocContext)]
Cause: Possible issues with back-end database.
Resolution:
Ensure the back-end is functioning correctly.
=================

Thanks Andrew.
may be i missed to create SRV records for the second FE server - Let me check this point and come back -- is it mandatory to create the SRV records for second FE server?
Are the clients using "Automatic Configuration"? Yes.
so web service need a hardware load balancer right?

Problem updating Click2Call and Skype ... and reso...

I noticed, in my Application Event Log (Win7), the following errors:
Log Name: Application
Source: MsiInstaller
Date: 11/01/2013 18:15:10
Event ID: 11729
Task Category: None
Level: Information
Keywords: Classic
User: DOMAIN\user
Computer: machine.domain.local
Description:
Product: Skype Click to Call -- Configuration failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">11729</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-11T07:15:10.000000000Z" />
<EventRecordID>287237</EventRecordID>
<Channel>Application</Channel>
<Computer>machine.domain.local</Computer>
<Security UserID="S-1-5-21-3026788693-2722709429-[removed for privacy]-1111" />
</System>
<EventData>
<Data>Product: Skype Click to Call -- Configuration failed.</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B42364346323936372D433831452D343043302D393831352D4330353737344645463132307D</Binary>
</EventData>
</Event>
And this:
Log Name: Application
Source: MsiInstaller
Date: 11/01/2013 18:15:10
Event ID: 1035
Task Category: None
Level: Information
Keywords: Classic
User: DOMAIN\user
Computer: machine.domain.local
Description:
Windows Installer reconfigured the product. Product Name: Skype Click to Call. Product Version: 6.5.11422. Product Language: 1033. Manufacturer: Skype Technologies S.A.. Reconfiguration success or error status: 1625.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">1035</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-11T07:15:10.000000000Z" />
<EventRecordID>287238</EventRecordID>
<Channel>Application</Channel>
<Computer>machine.domain.local</Computer>
<Security UserID="S-1-5-21-3026788693-2722709429-1111111111-1111" />
</System>
<EventData>
<Data>Skype Click to Call</Data>
<Data>6.5.11422</Data>
<Data>1033</Data>
<Data>1625</Data>
<Data>Skype Technologies S.A.</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B42364346323936372D433831452D343043302D393831352D4330353737344645463132307D3030303039306163636265623338386265623432313132613465663065666639613763633030303030393034</Binary>
</EventData>
</Event>
From the last one, the MSI code 1625 should mean "This installation is forbidden by system policy. Contact your system administrator" ... this seemed odd to me, as I'm the admin. So I decided to manually run: C:\Users\[user]\AppData\Local\Temp\Low\MSI\SkypeToolbars.msi
This reported that it couldn't perform the install as there was a version already installed.
Sure enough, in "Programs and Features" was "Skype Click to Call. Version: 5.10.9560"
For some reason, the V6 installer couldn't update it... but never reported the correct reason
So I uninstalled the previous version and then ran the MSI again ... this time it requested the Chrome be closed (it was, but Chrome has a few background processes) ... it should know how to stop them. I killed the processes and then the install ran smoothly.
As my Google searches didn't explain this error or how to fix it, I thought I'd post it here.
Hope it helps someone
Another little oddity ... Skype was 6.0.126 (20MB), while Click2Call is 6.5.11422 (31M)
So I thought I'd do a Check for Updates ... this told me I had the latest version. But, being the sceptic that I am, I downloaded the full installer and now have 6.1.129
Obviously someone needs to work on their update code ...
Maybe someone can pass these points onto appropriate people at Skype/Microsoft?
Regards,
Mike Lazarus
http://about.me/GLComputing

Hi bleze,
Maybe you can try to use the svcutil.exe to help you create the proxy:
#Svcutil.exe:
http://msdn.microsoft.com/en-us/library/aa347733(v=vs.110).aspx .
Besides, it will be better if you can tell us what error do you meet when you update the service reference in the 64bit.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

`Component install failed` blues...

I am trying to install the trial version of Photoshop Extended cs3 and every time I try, it will tell me that "Component Install Failed" and have a red x next to Photoshop and/or Shared Components. This is the first Photoshop product that I have tried to put on my computer, and the only other Adobe program we have is Flash MX. I did not install any beta`s and we recently formatted the hard drive, so I`m pretty sure that running the CS3 Script cleaner thing won`t help. I have also tried to install it on my laptop, (Recently formatted as well) and it does the same thing.
Any help would be appreciated!

Not sure if this means anything....a bunch of these came up...
Log Name:      Application
Source:        MsiInstaller
Date:          10/08/2008 11:07:09 AM
Event ID:      1035
Task Category: None
Level:         Information
Keywords:      Classic
User:          greg-PC\greg
Computer:      greg-PC
Description:
Windows Installer reconfigured the product. Product Name: Adobe Bridge Start Meeting. Product Version: 1.0. Product Language: 0. Reconfiguration success or error status: 0.
Event Xml:
    1035
    4
    0
    0x80000000000000
    2810
    Application
    greg-PC
    Adobe Bridge Start Meeting
    1.0
    0
    0
    (NULL)
    7B30384233323831392D364545462D343035372D414544412D3541423638314133364132337D

Win7 Msiinstaller keeps trying to install BB when I want to watch a KMP file

I can't seem to stop this loop from happening other than using the Task manger to stop it. I have checked file associations, remover the KMP software, and the BB software. I had a portable drive that I use to have the program installed to and it is no longer avalable to use..Any Ideas of how to stop other than reloading windows?
Log Name: Application Source: MsiInstaller Date: 1/9/2015 7:17:52 AM Event ID: 1035 Task Category: None Level: Information Keywords: Classic User: Jack-PC\Jack Computer: Jack-PC Description: Windows Installer reconfigured the product. Product Name: BlackBerry Desktop Software. Product Version: 7.1.0.41. Product Language: 1033. Manufacturer: Research In Motion Ltd.. Reconfiguration success or error status: 1602. Event Xml: 1035 4 0 0x80000000000000 45077 Application Jack-PC BlackBerry Desktop Software 7.1.0.41 1033 1602 Research In Motion Ltd. (NULL) 7B42453542303435302D444343422D344645392D393345322D3342333844383841373435427D3030303033313733346338643236376163636263623431396662336439613638623661363030303030393034

I can't seem to stop this loop from happening other than using the Task manger to stop it. I have checked file associations, remover the KMP software, and the BB software. I had a portable drive that I use to have the program installed to and it is no longer avalable to use..Any Ideas of how to stop other than reloading windows?
Log Name: Application Source: MsiInstaller Date: 1/9/2015 7:17:52 AM Event ID: 1035 Task Category: None Level: Information Keywords: Classic User: Jack-PC\Jack Computer: Jack-PC Description: Windows Installer reconfigured the product. Product Name: BlackBerry Desktop Software. Product Version: 7.1.0.41. Product Language: 1033. Manufacturer: Research In Motion Ltd.. Reconfiguration success or error status: 1602. Event Xml: 1035 4 0 0x80000000000000 45077 Application Jack-PC BlackBerry Desktop Software 7.1.0.41 1033 1602 Research In Motion Ltd. (NULL) 7B42453542303435302D444343422D344645392D393345322D3342333844383841373435427D3030303033313733346338643236376163636263623431396662336439613638623661363030303030393034

MsiInstaller 1035 Events - VmmAgent

Hi,
I have 2 Hyper-V hosts, both on 2012 R2. I just added both to be managed by VMM 2012 R2. Every 30 minutes, MsiInstaller logs a 1035 event to advise that it has 'Reconfigured' the product and does so for each app installed on the server.
On one host, I removed it from VMM. As such, this stopped the 1035's being logged. So this points to the vmmagent.
Anyone else see this and/or have a fix?
Cheers
Regards,
Stan Svetec
Blog:
http://stansvetec.blogspot.com
Twitter: LinkedIn:

Hi ssvetec,
Please ensure that the hyper-v host and VMM server are up-to-date .
In addition , please check if the VMM 2012R2 was installed latest RollUp .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Tracking the source of 1035 events

Hi,
As you may be aware that when ever you query win32_product class, it does consistency check of the installed products and logs event 1035 in the application event log.
Any clue on how to track which application is querying this win32_product class?
Thanks

Just guess…
When query win32_product class.
constantly repeated System events: Event ID: 7035 and Event ID: 7036
can get some clues from details of those two event?
Best,
Howtodo

Training and Event (PE) Tables

I would be grateful if someone could give me a copy or tell me how I can get a list of all the tables in PE - Training and Event Management.
Thanks

HRP1000 & HRP1001 are the main tables.And the rest are
Prices (Infotype 1021)
Availability Indicators (Infotype 1023)
Capacity (Infotype 1024)
Depreciation Meter/Validity (Infotype 1025)
Business Event Info (Infotype 1026)
Site-Dependent Additional Info (Infotype 1027)
Address (Infotype 1028)
Business Event Type Info (Infotype 1029)
Procedure (Infotype 1030)
Mail Address (Infotype 1032)
Name Format (Infotype 1034)
Schedule (Infotype 1035)
Costs (Infotype 1036)
Billing/Allocation Info (Infotype 1037)
Business Event Blocks (Infotype 1041)
Schedule Model (Infotype 1042)
Demand (Infotype 1060)
Web Link (Infotype 1061)
Knowledge Link (Infotype 1062)
Business Event Group Info (Infotype 1063)
to get the db table name just pre-fix HRP before the Infotype Number.
~Suresh

DB13offline backup erERRORMESSAGE: Error -1035 in dmdb6bkp.c(1498):SQL1035N

We have received the below msg when we took offline backup.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000251, user ID SAGARK)
Execute logical command DB6_DBBACKUP On host eccprod
Parameters:PRD OFFLINE TO /prdback/sapbackup BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0
Job started
Step 001 started (program RSDBAJOB, variant &0000000000250, user ID SAGARK)
Execute logical command DB6_DBBACKUP On host eccprod
Parameters:PRD OFFLINE TO /prdback/sapbackup BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0
set connect partition: 0
deactivate db PRD...
ERRORMESSAGE: Error 1495 in dmdb6bkp.c(1092):
SQL1495W Deactivate database is successful, however, there is still
a connection to the database.
Making database backup...
Database      = PRD
Backup Mode   = FULL
Backup Options= OFFLINE
Buffer size   = AUTOMATIC
buffers     = AUTOMATIC
Parallelism   = AUTOMATIC
numLocations = 1
location[0]   = /prdback/sapbackup
util priority = 0
ERRORMESSAGE: Error -1035 in dmdb6bkp.c(1498):
SQL1035N The database is currently in use. SQLSTATE=57019
Stopping database manager...
ERRORMESSAGE: Error -6036 in dmdb6bkp.c(1299):
SQL6036N START or STOP DATABASE MANAGER command is already in
progress.
Starting database manager...
ERRORMESSAGE: Error -6036 in dmdb6bkp.c(1308):
SQL6036N START or STOP DATABASE MANAGER command is already in
progress.
External program terminated with exit code 2
DB6_DBBACKUP returned error status E
TemSe: I/O error
set connect partition: 0
deactivate db PRD...
ERRORMESSAGE: Error 1495 in dmdb6bkp.c(1092):
SQL1495W Deactivate database is successful, however, there is still
a connection to the database.

Hello Mohan,
Please ensure you are using the latest available version of dmdb6bkp.
Did the backup eventual;ly complete?
However there had been some issues to deactivate/activate the database .
As note 594353 states , this is normal and on occurance of this event
the corresponding action is retried up to 10 times .
You can check this via
1. db2diag.log
2. List history backup commands
3. db2ckbkp                       ... DB2 Check backup command
You can ensure that the backup did complete.
Please update if the backup still fails.
Regards,
Paul

Integration Event webservice problem

Hi there
i'm trying to create a java client to check all contacts deleted in crmod. For that i've created a workflow rule that creates an integration event, everytime a contact is deleted.
Now when i try to get those events i'm getting this message: org.xml.sax.SAXException: Invalid element in crmondemand.xml.IntegrationEvent.SiebelMessage - ListOfContact
     at org.apache.axis.encoding.ser.BeanDeserializer.onStartChild(BeanDeserializer.java:258)
     at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1035)
     at org.apache.axis.message.SAX2EventRecorder.replay(SAX2EventRecorder.java:165)
     at org.apache.axis.message.MessageElement.publishToHandler(MessageElement.java:1141)
     at org.apache.axis.message.RPCElement.deserialize(RPCElement.java:236)
     at org.apache.axis.message.RPCElement.getParams(RPCElement.java:384)
     at org.apache.axis.client.Call.invoke(Call.java:2467)
     at org.apache.axis.client.Call.invoke(Call.java:2366)
     at org.apache.axis.client.Call.invoke(Call.java:1812)
     at crmondemand.ws.IntegrationEvent.Default_BindingStub.getEvents(Default_BindingStub.java:249)
     at TesteIntEvent.main(TesteIntEvent.java:40)
This is the piece of code that i'm using:
Default_BindingStub stub = new Default_BindingStub(url, service);
IntegrationEventWS_GetEvents_Input input = new IntegrationEventWS_GetEvents_Input();
IntegrationEventWS_GetEvents_Output output = new IntegrationEventWS_GetEvents_Output();
output = stub.getEvents(input);
the error occurs in the last line. Does anyone has an ideia of what is happening?
thanks in advance.

This is not answer of your question but alternate option.
If your requirement is just to check the contact deleted, use the Deleted Item Service API.
NO need to overload integration event queue. Though it can be done by IE also but for that you need to create the Queue, WF etc, not the efficient way.
Dinesh

Business Event change after follow up

I've changed entries in table T778T for specific infotypes relating to a business event, such as 1035 and 1024, in the thinking that after I've gone into infotype 1026 of a followed up BE and unticked 'follow up' to change the status back to firmly booked, it would allow those infotypes to be changed. However, when I try to change 1024 for instance, I get an error message of 'No change to business event possible, archived attendance records exist'. Does anyone know if there's a route around this message and changing the event infotypes?
Thanks

Hi Sunil,
I doubt if one can change the shopping cart after the quote has been accepted.But as far as restarting of workflow upon change in a shopping cart is concerned, it can be controlled using the authorization level (1 to 4) for a perticular role. "4" is the hightest authorization and "1" is the least.It is maintained in -Personalization oject key- BBP_WFL_SECURITY in TCODE-PFCG.
Once the quote is accepted , the PO can be created using the price mentioned in accepted quotation.
In bid invitation document which is created from a shopping cart, line item can be edited but no further line item can be added in this bid invitation doc.
I hope this info will be useful for you.
Regards,
Amit
[email protected]

Event ID 1035

Similar Messages

Maybe you are looking for