Event ID 13568 With Only One Domain Controller

I had two domain controllers in an SBS 2003 domain. The very first installed domain controller died. So I seized the FSMO roles and eventually removed it from the domain by cleaning up the metadata. I told my bosses that we
really needed a new server so that there would be a replication of the AD but no go.
Now, I am getting the 13568 Event ID error on the remaining Windows Server 2003 domain controller that has the SBS Active Directory. This error requires a restore of Active Directory from system state (of which I do have a backup). I eventually
fixed the dead server and was wondering if I could install SBS 2003 to this server and then restore AD to it from the system state backup.
If that is possible, then how do I do it and how do I get this server back into the domain so that the existing DC takes its AD and replicates it to itself.
Please let me know if I have not been clear. Susan E. Russel

Hi,
Event ID 13568 indicates the replica set is in Journal wrap error state, to resolve this, no need to restore AD from backup. This error occurs if a sufficient number of changes that occur while FRS is turned off in such a way that the last USN change that
FRS recorded during shutdown no longer exists in the USN journal during startup. The risk is that changes to files and folders for FRS replicated trees may have occurred while the service was turned off, and no record of the change exists in the USN journal.
To guard against data inconsistency, FRS asserts into a journal wrap state.
What happens in a Journal Wrap? : http://blogs.technet.com/b/instan/archive/2009/07/14/what-happens-in-a-journal-wrap.aspx
Journal Wrap error resolution: http://adfordummiez.com/?p=61
Regards,
Abhijit Waikar - MCSA 2003|MCSA 2003:Messaging|MCTS|MCITP:SA

Similar Messages

Multiple events per date with only one photo each - Unwanted

I have the eyefi wireless sd card in my camera and it is setup to transmit my photos into iphoto automatically, which it does. However, the problem arises in that iphoto creates multiple events for the same date each containing only one photo. I would prefer that iphoto create individual events per date and have the multiples of that date's photos within. I thought I had the settings configured to do so as I have preferences set for autosplit events one per day but I still see events such as - July 3, 2008 - July 3, 2008 - July 3, 2008 - each with only one photo inside.
I am wondering if it is something in iphoto's settings or the way in which eyefi transmits the photos into iphoto.
Any thoughts?

I do not have a WiFi connection to my camera so can not test but am just guessing
I can think of two possibilities
- 1 - if you are taking the photos with the WiFi connected then each time you snap a photo it may be being sent which would be looked at as a new import and therefore create a new event - to stop this I believe you would have to not have a full time WiFi connection to your camera or somehow set the camera to send batched - not each one - iPhoto will take each batch into and follow the rules for making events for that batch even if you camera is sending many batches of One photo
- 2 - You have the preference for making batches set to one every two hours and there is a long time between photos - I'm guessing that #1 is more likely
LN

Only One domain controller, Remote Registry service keeps DISABLING itself. Where in the registry could this be set?

This is killing my remote management. I have 4 server 2012R2 domain controllers. Only one of them is being affected with this problem. Almost everytime I check, the remote registry service is disabled again. It seems like there is a corrupt
group policy preference that keeps on attacking during a policy refresh, but I can't imagine setting a group policy to disable this service. It is needed for our remote management. Also the IP Tunnel service is also disabling. Another strange
artifact is that when I set a Windows Firewall policy to add an exception for remote administration in a group policy to my Admin workstation, it seemed to set a firewall rule in other computers to block remote administration. I can not figure out where
else this strange Windows Firewall rule Blocking remote administration could have come from. These may be related or they may not, but they are occuring on the same domain controller. I am able to set the RemoteRegistry service to enabled and to
start it (which I have done too many times now), but it constantly is being changed back to disabled. I am searching the registry to find any invalid entries or artifacts that may be affecting these two annoying effects, but I cannot find anything yet.
Any ideas? I need to know what policies will disable the remoteregistry service OR the IPTunelling service, or where in the registry this could be set to enact this during a policy refresh. Of course, any other ideas are welcome, I have spent
several days troubleshooting this, and need to conquer this by tomorrow if possible, thank you. James

Hi,
Please type
services.msc in RUN to open Services panel, navigate to the Remote Registry service. Then open its Properties and set
Startup type: Automatic. Then please check if this issue still exist.
In addition, please refer to mlippold’s suggestion (the last reply) in following thread and configure relevant
value in RemoteRegistry registry key, then check if can help you to solve this issue.
For registry items, please back up all registry items before all operations. That will help us to avoid some unexpected issue.
Remote
Registry Service stops automatically if we do not use it above 10 minutes
By the way, did you open Event Viewer and check if find any relevant errors?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can inherited events be used with only one processor?

Hi friends!
The question is quite simple: I have one parent event and several events which inherit from the first one. Every inherited event has its own properties and also the inherited properties (which have public visibility in the parent class so that the inheritance is automatic). I pass events to the CEP processor but it only works with the parent class and doesn't with the child ones. I mean, I'm using only one processor and only one CQL sentence.
Is it neccesary to configure one processor for every inherited event?
Thanks!

Hi friend!
Here you are:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xmlns:application="http://www.bea.com/ns/wlevs/config/application"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd
http://www.bea.com/ns/wlevs/config/application
http://www.bea.com/ns/wlevs/config/application/wlevs_application_config.xsd">
     <bean id="myConverter" class="com.bea.wlevs.adapter.example.mesevents.MeSEventsAdapter"/>
     <wlevs:adapter id="jmsInbound" provider="jms-inbound">
          <wlevs:listener ref="mesEventsChannel" />
          <wlevs:listener ref="inputPetitionChannel" />
          <wlevs:instance-property name="converterBean"
               ref="myConverter" />
     </wlevs:adapter>
<wlevs:event-type-repository>
<wlevs:event-type type-name="MeSEvent">
<wlevs:class>com.bea.wlevs.event.example.mesevents.MeSEvent</wlevs:class>
</wlevs:event-type>
<wlevs:event-type type-name="InputPetition">
<wlevs:class>com.bea.wlevs.event.example.mesevents.InputPetition</wlevs:class>
</wlevs:event-type>
</wlevs:event-type-repository>
<wlevs:channel id="mesEventsChannel" event-type="MeSEvent" advertise="true">
<wlevs:listener ref="mesEventsProcessor"/>
</wlevs:channel>
<wlevs:channel id="inputPetitionChannel" event-type="InputPetition" advertise="true">
<wlevs:listener ref="mesEventsProcessor"/>
</wlevs:channel>

<wlevs:processor id="mesEventsProcessor" />
<wlevs:channel id="mesEventsOutputChannel" event-type="MeSEvent" advertise="true">
<wlevs:listener>
<bean class="com.bea.wlevs.example.mesevents.MeSEventsBean"/>
</wlevs:listener>
<wlevs:source ref="mesEventsProcessor"/>
</wlevs:channel>
<wlevs:channel id="inputPetitionOutputChannel" event-type="InputPetition" advertise="true">
<wlevs:listener>
<bean class="com.bea.wlevs.example.mesevents.MeSEventsBean"/>
</wlevs:listener>
<wlevs:source ref="mesEventsProcessor"/>
</wlevs:channel>
</beans>
It says the following:
As you can see there are two input channels which are both connected to the JMS adapter as well as only one processor which is connected to the input channels and to the output channels. It is supposed that each event goes through each input and output channel but it fails and says the following:
Channels mesEventsOutputChannel and inputPetitionOutputChannel from the same query must have the same event type.
InputPetition is MeSEvent's child. It inherits all MeSEvent's preperties.
Does anybody know what is happening?
Thanks!

Counting (interneal timebase)events with only one counter

Hello,
i am using a PXI-6115 card. This card is external clocked with 8 MHz. But I want to measure only about every second. So I divided the external clock with the internal counter 0. This works fine.
Now my problem. Now I want to know the external clock rate. Is it possible to build a pulse period measurement with only one counter??
I thinking of counting internal timebase- pulses with counter 1 and to start and stop the counter 1 by the output of counter 0.
Is this possible and how??
Thanks for help, Ruediger

Yes, there's a way to measure pulse periods with a single counter. The trick is to perform a buffered period measurement and sum the periods. The size of the buffer will determine the quantization/roundoff error.
The source of this error is that you have no control over the initial phase relationship of your external clock and your internal timebase. There's a nominal ratio between the two frequencies, and you'd start by expecting ratio * (buffer size) total cycles counted.
However, your actual count must be an integer, so you'll get either the next-highest or next-lowest integer, but you can't predict or control which one.
Example: If you collect 1 period at 8 MHz using the internal 20 MHz timebase, you'll capture either 2 or 3 e
dges from your timebase, implying a measured frequency of either 10 MHz or 6.6667 MHz.
If you collect 1001 periods, you'll capture a total of 2502 or 2503 timebase edges, implying a measured frequency of either 8.0016 MHz or 7.9984 MHz.
Notes:
1. In many cases, you can set up for buffered event counting, using the internal 20 MHz clock as a source and your external 8 MHz as a gate.
The advantage is that the buffered values already represent cumulative time so you don't need to sum them.
A disadvantage would be that the internal 24-bit counter value will roll-over in less than 1 second at 20 MHz. I typically capture periods and then sum in software because I can convert to floating point between capture and sum if necessary to produce both high-resolution and long duration measurements.
2. You should typically ignore the very first value in the buffer and work only with the others. If you want to capture 1001 legitimate periods, size the buffer for at least 1002
-Kevin P.

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="staging.local"/>
    <Domain Name="staging.local"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature">3082019206092A864886F70D010702A08201833082017F020101310B300906052B0E03021A0500300B06092A864886F70D0107013182015E3082015A02010130373023311330110603550403130A545247315343434D3032310C300A06035504031303534D5302106C6A0DBD0066FA9642BBD3DB95A990CD300906052B0E03021A0500300D06092A864886F70D01010105000482010042A5446464A1253E1A8D831E124760EAAF9ABAEB8627D5066402ADA9E5EBF22032BD329C6DCEC93506E122ED6D43064E57504C60DEAD096C14F5873C03659B99660F7F037AE8B326F5A5AAD5D04E2FAFDE6BBE99B4226F1B45437D1214585783F2CC92E332045586025E1577F90B15EF16A18EBC10EE029550C3FF0255C74BC373E06851692D090B589FFAA2E2C427CE5687D04F31FE45D738D027F5357E03901E075A0AE9ECD9E5FA90A9AF7470A1877FFC6AD9DE2AAFE6717FB0237A59ACF8C96C797A5C83985F58B3EFD376F8BD29ABEA613B33B3CCEE9160697A83F6503FCF9BD12FFE1234ACF3A58EB7A0DB61915B5C543BB6A9D34491F281BAB589C55E</Property><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

How can I play different videos with only one MediaPlayer?

I want to play two videos with only one MediaPlayer:
private static MediaPlayerBuilder mpB;
private static Media mLogo;
private static Media mSaludo;
private static MediaPlayer mpLogo;
private static MediaView mvLogo;
private static Group gLogo;
public void start(final Stage stage) {
mLogo = MediaBuilder.create().source(myGetResource(VIDEOLOGO_PATH)).build();
mSaludo = MediaBuilder.create().source(myGetResource(VIDEOSALUDO_PATH)).build();
mpB = MediaPlayerBuilder.create();
mpLogo = mpB.media(mLogo).build();
mvLogo = MediaViewBuilder.create().mediaPlayer(mpLogo).build();
gLogo.getChildren().add(mvLogo);
sActual = new Scene(gPozos, WIDTH, HEIGHT, Color.BLACK);
stage.setScene(sActual);
stage.show();When I want to play mLogo:
sActual.setRoot(gLogo);
mpLogo.play();Then, when I want to play mSaludo I do this:
mpLogo = mpB.media(mSaludo).build();
sActual.setRoot(gLogo);
mpLogo.play();or this:
mpB.media(mSaludo).applyTo(mpLogo);
sActual.setRoot(gLogo);
mpLogo.play();or this:
mpB.media(mSaludo);
sActual.setRoot(gLogo);
mpLogo.play();But is impossible to change the Media. It doesn't work. Sometimes I play mLogo video and sometimes (depends on the code) the video mLogo doesn't start and I see an image of the first keyframe and nothing else. I have no exceptions, no errors, nothing.
I want to play mLogo and then mSaludo. How can I do this?
Thanks
Noelia

Ok, I understand, if I have 100 videos I have to build 100 MediaPlayers but only one MediaView.
Here I post my code with only two videos, I included all the asynchronous errors.
package pruebafx;
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import javafx.application.Application;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.media.Media;
import javafx.scene.media.MediaErrorEvent;
import javafx.scene.media.MediaPlayer;
import javafx.scene.media.MediaView;
import javafx.stage.Stage;
* @author Solange
public class PruebaFX extends Application {
    private static final Logger logger = Logger.getLogger("pruebafx.pruebafx");
    private static final String MEDIA_PATH = "/images/";
    private static final String VIDEOLOGO_PATH = MEDIA_PATH + "logo.flv";
    private static final String VIDEOSALUDO_PATH = MEDIA_PATH + "saludo.flv";
    private static Group root;
    private static Scene scene;
    private static MediaPlayer mpLogo;
    private static MediaPlayer mpSaludo;
    private static Media mLogo;
    private static Media mSaludo;
    private static MediaView mediaView;
     * @param args the command line arguments
    public static void main(String[] args) {
        Application.launch(args);
    @Override
    public void start(Stage primaryStage) {
        try {
            FileHandler fh = new FileHandler("DisplayManagerlog-%u-%g.txt", 100000, 100, true);
            // Send logger output to our FileHandler.
            logger.addHandler(fh);
            // Request that every detail gets logged.
            logger.setLevel(Level.ALL);
            // Log a simple INFO message.
            logger.info("Starting PruebaFX");
        } catch (Exception e) {
            System.out.println(e.getMessage());
        primaryStage.setTitle("Change Videos");
        root = new Group();
        mLogo = new Media(myGetResource(VIDEOLOGO_PATH));
        mSaludo = new Media(myGetResource(VIDEOSALUDO_PATH));
        mpLogo = new MediaPlayer(mLogo);
        mpSaludo = new MediaPlayer(mSaludo);
        mediaView = new MediaView(mpLogo);
        mpLogo.setOnEndOfMedia(new Runnable() {
            public void run() {
                mpLogo.stop();
                mediaView.setMediaPlayer(mpSaludo);
                mpSaludo.play();
        mpSaludo.setOnEndOfMedia(new Runnable() {
            public void run() {
                mpSaludo.stop();
                mediaView.setMediaPlayer(mpLogo);
                mpLogo.play();
        mLogo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en Media mLogo");
        mSaludo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en Media mSaludo");
        mpLogo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en MediaPlayer mpLogo");
        mpSaludo.setOnError(new Runnable() {
            public void run() {
                logger.severe("Error en MediaPlayer mpSaludo");
        mediaView.setOnError(new EventHandler<MediaErrorEvent>() {
            public void handle(MediaErrorEvent t) {
                logger.severe("Error en MediaView mediaView");
                logger.severe(t.getMediaError().getMessage());
        root.getChildren().addAll(mediaView);
        scene = new Scene(root, 300, 250);
        primaryStage.setScene(scene);
        primaryStage.show();
        mpLogo.play();
    public String myGetResource(String path) {
        return (this.getClass().getResource(path).toString());
}My video saludo.flv hangs up.
Here is the content of the log file:
<?xml version="1.0" encoding="windows-1252" standalone="no"?>
<!DOCTYPE log SYSTEM "logger.dtd">
<log>
<record>
<date>2011-12-12T12:03:53</date>
<millis>1323702233578</millis>
<sequence>0</sequence>
<logger>pruebafx.pruebafx</logger>
<level>INFO</level>
<class>pruebafx.PruebaFX</class>
<method>start</method>
<thread>12</thread>
*<message>Starting PruebaFX</message>*
</record>
<record>
<date>2011-12-12T12:04:06</date>
<millis>1323702246109</millis>
<sequence>1</sequence>
<logger>pruebafx.pruebafx</logger>
<level>SEVERE</level>
<class>pruebafx.PruebaFX$6</class>
<method>run</method>
<thread>12</thread>
*<message>Error en MediaPlayer mpSaludo</message>*
</record>
<record>
<date>2011-12-12T12:04:06</date>
<millis>1323702246109</millis>
<sequence>2</sequence>
<logger>pruebafx.pruebafx</logger>
<level>SEVERE</level>
<class>pruebafx.PruebaFX$4</class>
<method>run</method>
<thread>12</thread>
*<message>Error en Media mSaludo</message>*
</record>
</log>
Do you know when will be available the 2.0.2 version???
I have to finish my application!!!
Thanks.
Noelia

How to evolve a graph with only one loop

1. how to continue to add new nodes to a graph with only one loop
would like to use graph traversal like my previous post to traversal a binary tree, but this time, it can
loop forever, i mean it traverse all nodes in whole graph in the meanwhile it add new nodes too
assume maximum number of joint is 2 or 3
computing nightmare

I just realised that you weren't talking about cyclic graphs (in the case of 1 cycle) here, but meant a single pass traverse and mutate.
What you don't specify is how the new nodes are being supplied. If they are supplied up front, then the loop will of course terminate once all the inputs are addressed, rather than going on forever. If they are being supplied from time-to-time,
then you need to have some sort of event-wait on input. The traversal could have a move-next something like this
If at end of tree with no new nodes, wait for input
If at end of tree, with input, reset to start
If at insertion point for new node at top of input queue, insert that
Move to next node in tree
This seems the sort of thing that would naturally be coded in a functional language as a tail recursion rather than an iteration.

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
A couple of other items:
1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

The iphone/ipod is NOT a storage/backup device. Not maintaining a backup copy is a big mistake.
You can transfer itunes purchases from your iphone/ipod to your computer:
Authorize your computer for all accounts and then click File>Transfer Purchases

How to connect many devices with only one FW800 port in iMac?

Hi,
I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
(1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
(2) Connect the d2 Quadras to one port of the FW800 hub
(3) Get a FW 800 to FW 400 cable
(4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
Will

In addition to your listed considerations, you should consider the following.
Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives.

HT4527 an iphone can be synced with only one itunes library at a time error on same pc

an iphone can be synced with only one itunes library at a time error on same pc why?

Damaged library... See Empty/corrupt library after upgrade/crash.
tt2

An iPhone can be synced with only one iTunes library at a time

I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
"The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?

I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution.

I got a new pc and I am getting this message: The ipod 'harms ipod' is synced with another itunes library Do you want to erace this Ipod and synce with this itunes library? An Ipod can only be synced with only one itunes library at a time. Erasing and

The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library? An ipod can be synced with only one itunes library at a time. Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
I don't know what to do? I should save my library before I replace the contents, but I don't know how to do that! HELP!!

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod "Rick's IPOD" is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod “Rick's IPOD” is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

Same as you would if you bought a pc; copy everything from your old computer to your new one. Then you can just sync everything from the new computer, as you did with the old one.

Event ID 13568 With Only One Domain Controller

Similar Messages

Maybe you are looking for