Event ID 139 error MUP

We have following situation:
On most of our Windows Server 2008 R2 SP1 systems we get an "Delayed Write File" event, about every 5 minutes.
Event ID: 139
Source: Mup
Description: {Delayed Write FIle} Windows was unable to save all data for the file \\.... etc
I tried using different network storage and I get same error. At first I thought it was local volume error so I ran chkdsk /r on local volume and that did not fix it. So I went to eventvwr to check and I see those error. Please advise. 

After many hours of searching for answer I came across with this issue
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bdc40358-45c8-4c4b-883b-a695f382e01a/very-slow-network-performance-with-intel-nic-when-tcp-large-send-offload-is-enabled?forum=winserverhyperv
This solved my problem. 

Similar Messages

  • While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

    Hi Friends,
    OS = Windows XP 3
    Database = Oracle 11g R2 32 bit
    Processor= intel p4 2.86 Ghz
    Ram = 2 gb
    Virtual memory = 4gb
    I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it..... 
    ORA-28056: Writing audit records to Windows Event Log failed Error  and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
    Please some one help me out, as i need to install on the same machine .....
    Thanks and Regards

    AAP wrote:
    Thanks Now I am able to Create a database , but with one error,
    When I created a database using DBCA, at the last stage I got this error,
    Database Configuration Assistant : Warning
    Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it.  Start the listener & Registered database service & run EM Configuration Assistant again....
    But when I checked the listener was up.....
    Now what was the problem,  I am able to connect and work through sqlplus,
    But  I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
    Thanks & Regards
    Creation of the dbcontrol requires a connection via the listener.  When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete.  Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
    Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)?  That needs to be the first order of business.

  • Event Source: Application Error Event ID: 1000 (F1Server.exe)

    Hi.
    We regulary have an Application Error with "faulting module ntdll.dll" (see below).
    And we can't find what is the problem.
    Can you help us? 
    Windows Server 2003 R2 Eneterprise Edition Service Pack 2
    [boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Enterprise" /noexecute=AlwaysOff /fastdetect /PAE /3Gb
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1000
    Date: 1/11/2014
    Time: 10:33:47 PM
    User: N/A
    Computer: MS-GARANT001
    Description:
    Faulting application F1Server.exe, version 7.9.0.0, faulting module ntdll.dll, version 5.2.3790.4937, fault address 0x00060c17.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 46 31 53   ure  F1S
    0018: 65 72 76 65 72 2e 65 78   erver.ex
    0020: 65 20 37 2e 39 2e 30 2e   e 7.9.0.
    0028: 30 20 69 6e 20 6e 74 64   0 in ntd
    0030: 6c 6c 2e 64 6c 6c 20 35   ll.dll 5
    0038: 2e 32 2e 33 37 39 30 2e   .2.3790.
    0040: 34 39 33 37 20 61 74 20   4937 at 
    0048: 6f 66 66 73 65 74 20 30   offset 0
    0050: 30 30 36 30 63 31 37      0060c17 

    Hi,
    This issue may be caused by corrupted files or application conflicts. I recommend you to run "sfc /scannow" at the command prompt to check the system files. In addition, you can perform a clean boot to see if any service is causing the issue.
    If the above cannot solve it, maybe you can find if there is any hotfix for the application or uninstall the application.
    Best regards,
    Susie

  • Event 1000, Application Error (Faulting application name: w3wp.exe - Faulting module name: KERNELBASE.dll)

    Hello Guys,
    While running a web application am getting an error like: Remote server not responding. Below are the details of event viewers which been captured at the same time when this error happened:
    Event 1000, Application Error
    Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb
    Faulting module name: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1
    Exception code: 0xe053534f
    Fault offset: 0x000000000000a88d
    Faulting process id: 0x%9
    Faulting application start time: 0x%10
    Faulting application path: %11
    Faulting module path: %12
    Report Id: %13
    Event 1001, Windows Error Reporting
    Fault bucket , type 0
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: w3wp.exe
    P2: 7.5.7600.16385
    P3: 4a5bd0eb
    P4: KERNELBASE.dll
    P5: 6.1.7600.16850
    P6: 4e211da1
    P7: e053534f
    P8: 000000000000a88d
    P9: 
    P10: 
    Attached files:
    C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.xml
    C:\Windows\Temp\WERC9CE.tmp.hdmp
    C:\Windows\Temp\WEREE30.tmp.mdmp
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0
    Analysis symbol: 
    Rechecking for solution: 0
    Report Id: d46a6849-8f6a-11e1-98af-00215e6e4855
    Report Status: 4
    This is an priority issue which we are facing in IIS. IIS is configured for Framework 2.0 and underlying OS is - Windows
    Server 2008 R2 Standard.This issue is replicable and occurring frequently Please suggest how to resolve it. Any input related to above issue is appreciable.

    Please refer similar discussions and see if they help
    Faulting application name: w3wp.exe 
    http://telligent.com/support/communityserver/community_server_2008/f/288/t/1067447.aspx 
    Event ID: 1000, Faulting application w3wp.exe, faulting module unknown, 
    http://social.msdn.microsoft.com/forums/en-US/clr/thread/9be88a2f-c8cc-4a73-9371-45ab73982123
    For IIS related queries, please post them in IIS forum - http://forums.iis.net/
    A UNIVERSE without WINDOWS is CHAOS !
    This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
    About Me !!!

  • Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

    Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231. 
    We restart the excel service app and it solves. Looking for permanent solution.
    Regards,
    Kunal

    To resolved the issue do a simple restart. 
    Restart the server
    Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
    If the problem occurs often, restart the server running Excel Services Application.
    If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
    Here's the article with the explanation: Error communicating with Excel Services
    Application - Events 5231 5239 5240
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Startup error message:System Events got an error: NSInternalScriptError (8)

    I just upgraded from Panther to Tiger on my mac Mini and I can't seem to get rid of this message everytime I boot up:
    System Events got an error: NSInternalScriptError (8)
    Any idea how I can "fix" this?
    Much thanks.

    Do you have any login items listed in the Accounts pane of your System Preferences? If so, disable them and restart to see if that clears the message. If so, then re-enable them one by one and restart to see which one it is.
    In doing a Google search, that message appears to come from an AppleScript. So perhaps you have an AppleScript running at login that needs to be modified to be compatible with Tiger...
    charlie

  • Event Viewer ACPI error MBP mid09

    Hi, I have installed Win 7 on my MBP 5.5 mid 2009 and although its running well I am getting an error message in event viewer saying:
    Error
    25/09/2014 00:00:32
    ACPI
    13
    None
    something about the embedded controller failed to start in a reasonable time. Would anyone with the same mac please check their event logs to see if they have this error please?
    I had this and a HAL error under Win 7 ultimate x64 (used this as a test os) so I installed Win 7 Pro from a Genuine Disc (I do not condone piracy) and I am getting the ACPI error (only after all the drivers were installed, the error message didnt show prior to boot camp 4 install). So before I spend £100 on a Genuine Windows disc (I already purchased Windows 8 at £106 but it seems apple dont support it on this mac :-(...) I'd like to know if its a failing logic board or driver related.
    Thanks in advance
    Darren

    I have been running OSX for around 1 hour and then I rebooted into windows 7, loaded the event logs immediately and found the ACPI error had been recorded precisely 1 hour before windows had booted, I am wondering if this could be a bug between Mac/Windows time feature. after more restarts the ACPI isn't being recorded and other events times are correct.
    edit:
    I have just disabled the Synchronise with internet time feature in windows. I'll keep a look out.

  • I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:     InPageError   Error Status Code:     c0000185   Faulting Media Type:     00000003   OS Version:     6.1.7601.2.1.0.768.3. Any clue why or how

    I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:
    InPageError   Error Status Code:
    c0000185   Faulting Media Type:
    00000003   OS Version:
    6.1.7601.2.1.0.768.3. Any clue why or how to fix?

    InPageError
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get itunes to launch properly afterwards?

  • Event ID: 6875 Error

    Dear All,
    I found below error repeating in my event logs.
    "Error loading and running event receiver Microsoft.SharePoint.Publishing.Internal.PublishingWebEventReceiver in Microsoft.SharePoint.Publishing, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
    Additional information is below.
    : <nativehr>0x80070005</nativehr><nativestack></nativestack>Access denied."
    Any help would be greatly appreciated to fix this error.
    Regards,
    saya

    According to this article you can fix this issue by repairing your SharePoint installation and running configuration wizard again:
    http://technet.microsoft.com/en-us/library/ff382637.aspx
     It's not included in SP1, I couldn't find any entry.
     Here is the complete list:
    http://download.microsoft.com/download/B/0/D/B0D1540B-6CF6-4674-9C8E-7A45FD91C163/Microsoft%20SharePoint%202010%20and%20Office%20servers%20Service%20Pack%201%20Changes.xlsx
    If this helped you resolve your issue, please mark it Answered

  • Event ID: 10830 errors in our RMS server.

    Hi
    We are getting Every hour 6 to 7 Event ID: 10830 errors in our RMS server. Help us to resolve this issue.
    Event Type:    Error
    Event Source:    Health Service Modules
    Event Category:    None
    Event ID:    10830
    Date:        10/27/2011
    Time:        4:08:05 AM
    User:        N/A
    Computer:    IND-APP142
    Description:
    An alert couldn't be inserted to the database. This could have happened because  of one of the following reasons:
         - Alert is stale. The alert is generated by an MP recently deleted.
         - Database connectivity problems or database running out of space.
         - Alert received is not valid.
     The following details should help to further diagnose:
     Details: RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database "OperationsManager",
    table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
    The statement has been terminated.RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database
    "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
    The statement has been terminated.RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database
    "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
    The statement has been terminated.RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database
    "OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
    The statement has been terminated..
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Regards Donald D'souza http://donald-scom.blogspot.com/

    Hi
    I am able to find out from which agent this error is causingby the below command
    get-monitoringobject -id HealthServiceId
    I have followed the below steps to resolve the ssue
    1. Stopped the Health service
    2. Deleted the Health Service State Folder
    3. Started the Health service
    Still the issue was not fixed.  This error is coming from a Domain controller. The agent pointing to the gateway server so i have followed the same above steps on the gateway server but still the issue not resolved.  Then I have restarted the SDK,
    Config and Health Service on the RMS server but still I am getting the error.
    Help us on this.
    Regards Donald D'souza http://donald-scom.blogspot.com/

  • Event Queue Deadlock Error

    LabVIEW 7.1, PDA Module for Palm OS (long-time LV programmer, new to PDA module)
    I am writing an app that displays a main screen of choices via Boolean button controls.  An Event structure is used to detect ValueChange in the Booleans.  When a button is clicked, a sub-vi is called that opens the sub-vi's front panel that has data display and a couple of buttons that are also processed by an event structure.  I got a "event queue deadlocked" error message when testing.  Does this application structure violate the "single event structure in a loop" rule, even though one queue is in a sub-vi?  Must I use a state machine or some other architecture to make this work?
    Thanks,
    BevP

    A lot of time has passed but now I find the same problem and I have the solution.
    If you have an event structure you MUST show the control and indicators involved in the cases in the front panel and in the monitor of your PDA/Touchscreen device, because oterwise the event queue deadlocked error appears.
    It makes sense becasuse if you do not show them; you will never be able to call events and the aplication is going to stuck. 

  • SQL Extended Events for finding errors

    SQL Extended Events for finding errors, how to find out more than SQL text, like the stored procedure?
    SQL 2012, 2008 and 2005 (not much 2005)
    We had an agent job that was not completing and was not giving any errors. Turned out that too large a number was being SET into an integer field. We set up a SQL Extended Events based on the following URL. It gave us the SQL text and that did help. BUt
    how could we have done even more to find the error? Is there a way to find the stored procedure? Because the SQL text was pretty generic. What else can be used to find errors that are not being reported back to the agent job?
    http://www.brentozar.com/archive/2013/08/what-queries-are-failing-in-my-sql-server/

    Hi,
    Are you able to manually execute the stored procedure? How many steps are there in this job?
    You may create a test job with only one step running this stored procedure and test the result.
    As Kalman suggested, please check the relative message in job history and event viewer.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • AppLocker: Event ID 8000 errors

    AppLocker issue:
    2 GPO’s configured for AppLocker,  one set to enforce and one set to audit. Both have the same xml rule sets containing approximately 6634 rules.
    Recently both the audit and enforced Event Logs are producing numerous Event ID 8000 errors, which relates to the policy not being correctly applied. Initial thoughts were pointing to a corruption in the GPO or .xml. So the GPO was recreated breaking down
    the 6634 rules into 6 separate xml’s, each .xml works without issue separately, but once merged the event id 8000 errors reoccur. If any 5 of the xml’s are merged the errors stop. Which makes me think it’s due to the overall size of the GPO / .xml. According
    to all info I can find, the supported AppLocker  / GPO size is 100MB, at this stage my merged xml is under 7MB.
    Due to requirements from the client we cannot path rule %programfiles% which would reduce the overall size.
    http://technet.microsoft.com/en-us/library/ee619725(v=ws.10).aspx#BKMK_MaxGPO
    What is the maximum number of rules AppLocker
    can evaluate?
    There is no limit to the number of rules you can create, but consider that performance could degrade with more rules to evaluate and enforce. This
    is the same whether the rules are applied through a local security policy or through a GPO. The more rules per GPO, the longer AppLocker requires for evaluation. The number of AppLocker rules in a GPO is capped by the maximum supported size of the GPO which
    is 100 MB. However, the number of rules that can fit in 100 MB can vary by the type of rules.
    8000
    Error
    Application Identity Policy conversion failed. Status<%1>
    Indicates that the policy was not applied correctly to the computer. The status message is provided for troubleshooting purposes.

    Hi,
    >>
    So the GPO was recreated breaking down the 6634 rules into 6 separate xml’s, each .xml works without issue separately, but once merged the event id 8000 errors reoccur.
    If any 5 of the xml’s are merged the errors stop.
    Before going further, do we also configure other settings in the AppLocker GPOs?
    Based on your description, as you have inferred the cause, this issue is most likely related to the number of rules. Although the maximum supported size of the GPO is 100MB,
    how many rules can be configured together in a GPO depends on the specific rules.
    Best regards,
    Frank Shen

  • Event ID 1058 Error Code 1326 Logon Failure; unknown user name or bad password

    I am attempting to apply a group policy to a group of computers and I will get this event ID and error code generated.  I can unc to the gpt.ini file.  What can I do to resolve this problem?  My structure is like this:  I have a 2003
    R2 DC located at site A (and this computer WIN7 is also located at site A) and I also have other 2003 DC's located at remote offices (across WAN links).  This computer seems to be wanting to apply the GPO from one of the remote office DC's as opposed
    to the local DC that is much closer - how can I change how GPO is processed on this computer?

    I have two Domain Controllers Main ( Main DC Win 2012) and Second DC Win 2008.
    the date of some policies is not out of date....
    please check these files to know the problem.
    dcdiag.txt output:
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       * Verifying that the local machine ASMDC, is a Directory Server.
       Home Server = ASMDC
       * Connecting to directory service on server ASMDC.
       * Identified AD Forest.
       Collecting AD specific global data
       * Collecting site info.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
       The previous call succeeded
       Iterating through the sites
       Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       Getting ISTG and options for the site
       * Identifying all servers.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
       The previous call succeeded....
       The previous call succeeded
       Iterating through the list of servers
       Getting information for the server CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       * Identifying all NC cross-refs.
       * Found 2 DC(s). Testing 2 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\ASMDC
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             Determining IP6 connectivity
             * Active Directory RPC Services Check
             ......................... ASMDC passed test Connectivity
       Testing server: Default-First-Site-Name\BSMDC
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity
             Determining IP6 connectivity
             * Active Directory RPC Services Check
             ......................... BSMDC passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\ASMDC
          Starting test: Advertising
             The DC ASMDC is advertising itself as a DC and having a DS.
             The DC ASMDC is advertising as an LDAP server
             The DC ASMDC is advertising as having a writeable directory
             The DC ASMDC is advertising as a Key Distribution Center
             The DC ASMDC is advertising as a time server
             The DS ASMDC is advertising as a GC.
             ......................... ASMDC passed test Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Starting test: FrsEvent
             * The File Replication Service Event log test
             ......................... ASMDC passed test FrsEvent
          Starting test: DFSREvent
             The DFS Replication Event Log.
             ......................... ASMDC passed test DFSREvent
          Starting test: SysVolCheck
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... ASMDC passed test SysVolCheck
          Starting test: KccEvent
             * The KCC Event log test
             Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
             ......................... ASMDC passed test KccEvent
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             ......................... ASMDC passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             Checking machine account for DC ASMDC on DC ASMDC.
             * SPN found :LDAP/ASMDC.buc.edu/buc.edu
             * SPN found :LDAP/ASMDC.buc.edu
             * SPN found :LDAP/ASMDC
             * SPN found :LDAP/ASMDC.buc.edu/BUC
             * SPN found :LDAP/5e88f85b-15a6-4ff5-b0fd-6df748df06fd._msdcs.buc.edu
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e88f85b-15a6-4ff5-b0fd-6df748df06fd/buc.edu
             * SPN found :HOST/ASMDC.buc.edu/buc.edu
             * SPN found :HOST/ASMDC.buc.edu
             * SPN found :HOST/ASMDC
             * SPN found :HOST/ASMDC.buc.edu/BUC
             * SPN found :GC/ASMDC.buc.edu/buc.edu
             ......................... ASMDC passed test MachineAccount
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC ASMDC.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=buc,DC=edu
                (Schema,Version 3)
             * Security Permissions Check for
               CN=Configuration,DC=buc,DC=edu
                (Configuration,Version 3)
             * Security Permissions Check for
               DC=buc,DC=edu
                (Domain,Version 3)
             ......................... ASMDC passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share \\ASMDC\netlogon
             Verified share \\ASMDC\sysvol
             ......................... ASMDC passed test NetLogons
          Starting test: ObjectsReplicated
             ASMDC is in domain DC=buc,DC=edu
             Checking for CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             ......................... ASMDC passed test ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Starting test: Replications
             * Replications Check
             * Replication Latency Check
                DC=ForestDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=DomainDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Schema,CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
             * Replication Site Latency Check
             ......................... ASMDC passed test Replications
          Starting test: RidManager
             * Available RID Pool for the Domain is 8604 to 1073741823
             * ASMDC.buc.edu is the RID Master
             * DsBind with RID Master was successful
             * rIDAllocationPool is 7604 to 8103
             * rIDPreviousAllocationPool is 7604 to 8103
             * rIDNextRID: 7640
             ......................... ASMDC passed test RidManager
          Starting test: Services
             * Checking Service: EventSystem
             * Checking Service: RpcSs
             * Checking Service: NTDS
             * Checking Service: DnsCache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: w32time
             * Checking Service: NETLOGON
             ......................... ASMDC passed test Services
          Starting test: SystemLog
             * The System Event log test
             An Warning Event occurred.  EventID: 0x825A0024
                Time Generated: 08/21/2014   00:22:16
                Event String:
                The time service has not synchronized the system time for 86400 seconds because none of the time service providers provided a usable time stamp. The time service will not update the local system
    time until it is able to synchronize with a time source. If the local system is configured to act as a time server for clients, it will stop advertising as a time source to clients. The time service will continue to retry and sync time with its time sources.
    Check system event log for other W32time events for more details. Run 'w32tm /resync' to force an instant time synchronization.
             An Warning Event occurred.  EventID: 0x8000000E
                Time Generated: 08/21/2014   00:32:29
                Event String:
                There were password errors using the Credential Manager. To remedy, launch the Stored User Names and Passwords control panel applet, and reenter the password for the credential BUC.EDU\administrator.
             An Error Event occurred.  EventID: 0x00000422
                Time Generated: 08/21/2014   00:32:29
                Event String:
                The processing of Group Policy failed. Windows attempted to read the file \\buc.edu\sysvol\buc.edu\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not
    successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
                a) Name Resolution/Network Connectivity to the current domain controller.
                b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
                c) The Distributed File System (DFS) client has been disabled.
             ......................... ASMDC failed test SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Starting test: VerifyReferences
             The system object reference (serverReference)
             CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
             CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             The system object reference (serverReferenceBL)
             CN=ASMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
             and backlink on
             CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             ......................... ASMDC passed test VerifyReferences
          Test omitted by user request: VerifyReplicas
       Testing server: Default-First-Site-Name\BSMDC
          Starting test: Advertising
             The DC BSMDC is advertising itself as a DC and having a DS.
             The DC BSMDC is advertising as an LDAP server
             The DC BSMDC is advertising as having a writeable directory
             The DC BSMDC is advertising as a Key Distribution Center
             The DC BSMDC is advertising as a time server
             The DS BSMDC is advertising as a GC.
             ......................... BSMDC passed test Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Starting test: FrsEvent
             * The File Replication Service Event log test
             ......................... BSMDC passed test FrsEvent
          Starting test: DFSREvent
             The DFS Replication Event Log.
             ......................... BSMDC passed test DFSREvent
          Starting test: SysVolCheck
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... BSMDC passed test SysVolCheck
          Starting test: KccEvent
             * The KCC Event log test
             Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
             ......................... BSMDC passed test KccEvent
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             ......................... BSMDC passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             Checking machine account for DC BSMDC on DC BSMDC.
             * SPN found :LDAP/BSMDC.buc.edu/buc.edu
             * SPN found :LDAP/BSMDC.buc.edu
             * SPN found :LDAP/BSMDC
             * SPN found :LDAP/BSMDC.buc.edu/BUC
             * SPN found :LDAP/93561cab-4fb3-421f-9a67-af6b4c280eca._msdcs.buc.edu
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/93561cab-4fb3-421f-9a67-af6b4c280eca/buc.edu
             * SPN found :HOST/BSMDC.buc.edu/buc.edu
             * SPN found :HOST/BSMDC.buc.edu
             * SPN found :HOST/BSMDC
             * SPN found :HOST/BSMDC.buc.edu/BUC
             * SPN found :GC/BSMDC.buc.edu/buc.edu
             ......................... BSMDC passed test MachineAccount
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC BSMDC.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=buc,DC=edu
                (NDNC,Version 3)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=buc,DC=edu
                (Schema,Version 3)
             * Security Permissions Check for
               CN=Configuration,DC=buc,DC=edu
                (Configuration,Version 3)
             * Security Permissions Check for
               DC=buc,DC=edu
                (Domain,Version 3)
             ......................... BSMDC passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share \\BSMDC\netlogon
             Verified share \\BSMDC\sysvol
             ......................... BSMDC passed test NetLogons
          Starting test: ObjectsReplicated
             BSMDC is in domain DC=buc,DC=edu
             Checking for CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
                Object is up-to-date on all servers.
             ......................... BSMDC passed test ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Starting test: Replications
             * Replications Check
             * Replication Latency Check
                DC=ForestDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=DomainDnsZones,DC=buc,DC=edu
                   Latency information for 1 entries in the vector were ignored.
                      1 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Schema,CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                CN=Configuration,DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
                DC=buc,DC=edu
                   Latency information for 5 entries in the vector were ignored.
                      5 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency
    information (Win2K DC).  
             * Replication Site Latency Check
             ......................... BSMDC passed test Replications
          Starting test: RidManager
             * Available RID Pool for the Domain is 8604 to 1073741823
             * ASMDC.buc.edu is the RID Master
             * DsBind with RID Master was successful
             * rIDAllocationPool is 8104 to 8603
             * rIDPreviousAllocationPool is 8104 to 8603
             * rIDNextRID: 8106
             ......................... BSMDC passed test RidManager
          Starting test: Services
             * Checking Service: EventSystem
             * Checking Service: RpcSs
             * Checking Service: NTDS
             * Checking Service: DnsCache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: w32time
             * Checking Service: NETLOGON
             ......................... BSMDC passed test Services
          Starting test: SystemLog
             * The System Event log test
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:15
                Event String:
                Driver Send To Microsoft OneNote Driver required for printer Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:18
                Event String:
                Driver SolidPDF XChange required for printer SolidPDF XChange is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:18
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!net_pc5!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:19
                Event String:
                Driver Send To Microsoft OneNote Driver required for printer !!BUCLAPTOP1!Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
             An Warning Event occurred.  EventID: 0x80000008
                Time Generated: 08/20/2014   23:52:20
                Event String:
                The jobs in the print queue for printer Microsoft XPS Document Writer (redirected 2) were deleted. No user action is required.
                To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
    Advanced tab, and then clear the Log spooler warning events check box.
             An Warning Event occurred.  EventID: 0x80000004
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Printer Microsoft XPS Document Writer (redirected 2) will be deleted. No user action is required.
                To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
    Advanced tab, and then clear the Log spooler warning events check box.
             An Warning Event occurred.  EventID: 0x80000003
                Time Generated: 08/20/2014   23:52:20
                Event String:
                Printer Microsoft XPS Document Writer (redirected 2) was deleted, and users will no longer be able to print to this printer. No user action is required.
                To stop logging information events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click
    the Advanced tab, and then clear the Log spooler information events check box.
             An Error Event occurred.  EventID: 0x00000457
                Time Generated: 08/20/2014   23:52:22
                Event String:
                Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 (Copy 1) is unknown. Contact the administrator to install the driver before you log in again.
             ......................... BSMDC failed test SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Starting test: VerifyReferences
             The system object reference (serverReference)
             CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
             CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             The system object reference (serverReferenceBL)
             CN=BSMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
             and backlink on
             CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
             are correct.
             ......................... BSMDC passed test VerifyReferences
          Test omitted by user request: VerifyReplicas
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Test omitted by user request: DNS
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : buc
          Starting test: CheckSDRefDom
             ......................... buc passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... buc passed test CrossRefValidation
       Running enterprise tests on : buc.edu
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Starting test: LocatorCheck
             GC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             PDC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             Time Server Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             Preferred Time Server Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             KDC Name: \\ASMDC.buc.edu
             Locator Flags: 0xe00013fd
             ......................... buc.edu passed test LocatorCheck
          Starting test: Intersite
             Skipping site Default-First-Site-Name, this site is outside the scope
             provided by the command line arguments provided.
             ......................... buc.edu passed test Intersite
    ====================================================================
    Repadmin: running command /showrepl against full DC localhost
    Default-First-Site-Name\ASMDC
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: 5e88f85b-15a6-4ff5-b0fd-6df748df06fd
    DSA invocationID: 1355f657-cd24-4ad4-b890-f04f5c624acd
    ==== INBOUND NEIGHBORS ======================================
    DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:43:56 was successful.
    CN=Configuration,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:41:11 was successful.
    CN=Schema,CN=Configuration,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-20 23:51:37 was successful.
    DC=DomainDnsZones,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-21 00:45:39 was successful.
    DC=ForestDnsZones,DC=buc,DC=edu
        Default-First-Site-Name\BSMDC via RPC
            DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
            Last attempt @ 2014-08-20 23:51:37 was successful.
    Regards and thanks in advance
    Mhiar

  • System Events got an error: Can't get current configuration of service?

    I'm trying to connect/disconnect services through apple script, here is the error I'm getting for "Ethernet" "AirPort" (these services are configured in services tab)
    I am able to manualy On/Off these services without supplying admin password, therefore it might not be privilages issue.
    *Error message:*
    *System Events got an error: Can’t get current configuration of service id "099F7D16-4F3A-4D49-9111-A4DF0A645378" of network preferences.*
    Scipt used:
    tell application "System Events"
    tell network preferences
    tell current location
    get the name of every service
    set myService to service "AirPort"
    if exists myService then
    --get service properties of myService
    set isConnected to connected of current configuration of myService
    if isConnected then
    disconnect myService
    repeat while (get connected of current configuration of myService)
    delay 1
    end repeat
    end if
    connect myService
    end if
    end tell
    end tell
    end tell

    Hi Damian and welcome to Apple Discussions!
    One suggestion: try
    tell application "Finder" to open item 1 of docs
    (without 'using "Corel Painter 8"')
    As far as the Finder is concerned, "Corel Painter 8" is just a string of characters. And telling the Finder to open a file is just the same as double-clicking it: the Finder knows which app to use - as long as these are native Corel Painter 8 docs.
    Hope this helps,
    H

Maybe you are looking for

  • Urgent ...! How to get Current Quarter of the Fiscal Year

    Hi Friends,    I need to calculate current Quarter of the Fiscal Year 4 , 5 like that. SAP has Provided 3 Variable(Current Quarter of the Fiscal Year 2 like that 3 variables), my customer is looking for some more variables. Can any one help me out hh

  • EOS 70D : Slow shutter speed when LCD screen turned on

    Hi ! Need your help. I am beginner & I have new 70D camera. When LCD panel turned off, the shutter speed is quite fast. When I turn on LCD Panel, the shutter speed automatically slows down & sounds annoying. The pictures are same in both cases. Also,

  • The font for my toolbars/menus/tabs/awesome bar are wrong.

    I downloaded F4b8 yesterday and found that the font used in the toolbars/tab titles/address bar/menu were wrong. At first it was showing as Algerian something or other, which I believe was a font I had installed. I deleted this font, and the font in

  • Compilation error : GetJavaVM

    i'm getting the following compilation error..... my_file.obj : error LNK2019: unresolved external symbol _GetJavaVM reference d in function Javaifswitch_opn@20 my_file.dll : fatal error LNK1120: 1 unresolved externals pls help!!

  • Down To The LAst Byte

    Hey all, I have been working on an currency conversion applet program for my final for the last couple of weeks. I have been working mainly on the interface part. Have worked my way through quite a few errors and exceptions and have learned a lot but