Event ID (16640) in source (SMARTS) cannot be found

the decription for Event ID (16640) in source (SMARTS) cannot be found. The local computer
may not have the nescessary registry information or message DLL files to display the message
from a remote computer.You may able to use the /AUXSOURCE = Flag to retrieve this description
The following information is a part of event [10-oct-2011 08:02:03 AM+419ms] t@9316AD_CallbackICMP #1
ICMP-E-ESENDTO- cannot send data to 172.19.14.3
SYS-zWSAEINTR-Interrupted system call
I am getting above error message on my ciscoworks server.
For 5 min the server became unreachable and then it come up automatically.when i checked the events I found the above one, also at the same time my Cisco works daemon were restarted automatically,
CW-3.2  DFM -3.2
Please help

Hi All,
can you provide solution on below error.
The description for Event ID 17052 from source MSSQLSERVER cannot be found
Severity: 16 Error:0, OS: 0 [Microsoft][SQL Server Native Client 10.0]Unable to complete login process due to delay in opening server connection
Thanks in advance.
Vijay
 Check below thread, information is not complete to actually comment what were you doing when you got this message.refer errorlog for more details
http://social.msdn.microsoft.com/Forums/en-US/9a41ced9-19ad-4c4f-83ac-7e877b699a8f/login-failure-error-in-event-log-daily
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Similar Messages

  • The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
    installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    Thanks
    Suresh
    Suresh

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0
    from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
    Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
    temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    We are using VS 2013 (premium) and IE 10.0,  scripts have been created on the same versions. It is working fine  on
    developers command prompt but the same tests are getting failed in lab center test agent machine
    test agent log:
    QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
    QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
    QTAgentService.exe, AgentPro
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentService: Connection to controller is up.
    Thanks
    Suresh

  • My Application logs "The description of Event ID 0 from MyApp cannot be found" event to application event log

    Hello,
    This is regarding the following event logged by my application (MyApp.exe) to the application event log:
    Log Name:      Application
    Source:        MyApp
    Date:          03/2/2015 12:00:09 PM
    Event ID:      0
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Rajesh
    Description:
    The description for Event ID 0 from source MyApp cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    I have confirmed that the key "EventMessageFile" in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application\MyApp correctly specifies the "dll" responsible for displaying events.
    I would appreciate suggestions on the above.
    Best Regards,
    Rajesh K Singh

    Hi All,
    can you provide solution on below error.
    The description for Event ID 17052 from source MSSQLSERVER cannot be found
    Severity: 16 Error:0, OS: 0 [Microsoft][SQL Server Native Client 10.0]Unable to complete login process due to delay in opening server connection
    Thanks in advance.
    Vijay
     Check below thread, information is not complete to actually comment what were you doing when you got this message.refer errorlog for more details
    http://social.msdn.microsoft.com/Forums/en-US/9a41ced9-19ad-4c4f-83ac-7e877b699a8f/login-failure-error-in-event-log-daily
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • SBO Mailer Error - The specified resource type cannot be found in the image file

    Hi Experts,
    I have created an alert in SBO and selected email and internal option for same. I get internal message however email is not getting delivered, I checked the Event Viewer of Windows and below error is shown for SBOMail.
    The description for Event ID 62 from source SBOMail cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    Failed to mark records error [-1]
    The specified resource type cannot be found in the image file
    I can send email from sbo for other documents but the alert is not delivering email.
    Please advise.
    Thanks
    Deepak

    Hi Deepak..
    Check with these threads...
    http://scn.sap.com/thread/966957
    http://scn.sap.com/thread/1295818
    SBOMail Application log error
    SBOMail error in event log
    Hope Helpful
    Regards
    Kennedy

  • Why can't I edit images in the develop module? It's telling me folders cannot be found.

    Why can I not edit images in the develop module? It is telling me that the source folders cannot be found.

    When I click on the RSS button, I got this
    message:
    "Safari can’t open the page “feed://wwwhome.cs.utwente.nl/~fiorezet/UT/Publications/rss.xml”. The error was: “unknown error” (NSURLErrorDomain:-1)
    Will need to look further into that one.
    I used the Feed Validator Website to check my RSS files. The Website says: "This feed does not validate". The site also shows in which lines the errors are. The link below shows what I mean:
    http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwwwhome.cs.utwente.nl%2F%257 Efiorezet%2FUT%2FHome%2Frss.xml
    What should I do to solve my problem?
    Regards,

  • The description for Event ID 8306 from source Microsoft-SharePoint Products-SharePoint Foundation cannot be found

    hi,
    can anyone please help me with the following:
    The description for Event ID 8306 from source Microsoft-SharePoint Products-SharePoint Foundation cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
    the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc/actas is too busy.
    The publisher has been disabled and its resource is not avaiable. This usually occurs when the publisher is in the process of being uninstalled or upgraded
    _________________________________________________________ Fahad Khan

    Hi,
    Please try the following steps to troubleshoot your issue:
    1.      
    You can try to re-run SharePoint 2010 products configuration wizard to see any problems that still exist.
    2.      
    Go to IIS and see the status of SecurityTokenServiceApplicationPool service, whether it is stopped or not, restart the pool.
    3.      
    Go to manage web application services, review the status of Security Token Service application , try to restart.
    4.      
    In Central Administration>Security>Configure Service Account>Change the service account for the Security Token Service application to some other managed account.
    5.      
    If the issue persists, try the resolution in this blog:
    http://blogs.msdn.com/b/sowmyancs/archive/2010/07/16/sharepoint-2010-service-applications-bcs-metadata-access-service-are-not-working.aspx
    Let me know the result.
    Xue-Mei Chang

  • Event ID 9112 from source LSDP Service cannot be found

    After updating my Lenovo Setting Dependency Package to the latest version, I am seeing this event in my Windows 8 application log.   
    The description for Event ID 9112 from source LSDP Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    I have tried manually installing the latest version (1.2.5.8)
    Why am I seeing this issue in the Windows application event log?
    Thanks
    Barry

    Hi,
    To further check whether it is KB3011780 that causes this issue, I suggest you uninstall the update, check the issue, reinstall the update, check the issue again.
    Regarding to the .Netframework error, we have Microsoft .NET Framework Repair Tool avilable, please use the tool to fix the issue instead of disabling .Netframework.
    Microsoft .NET Framework Repair Tool is available
    http://support.microsoft.com/kb/2698555
    Yolanda Zhu
    TechNet Community Support

  • The data source "....." referenced in the form template is not valid or cannot be found

    Greetings,
    I have an InfoPath 2013 form that uses an external data connection.  The data connection became corrupt (somehow, no one knows who changed what).  A user went in to InfoPath designer and created a new data connection and changed all references
    to use that new data connection.  Now the form cannot be published at all with the error
    "The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
    The new data source they created is GetUserProfileByName2 and changed all references.
    Of course, since it is broke, they asked me to see if I can find the issue.  I went through the form looking to see if they missed any references to the old data connection and can't find anything.
    Where is InfoPath storing the old data connection information and where can I remote it?  I looked in the manifest and don't see it there either.
    Any thoughts?
    Thank you!

    Hi Bob,
    There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
    For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
    Please make sure that all the references are updated in the manifest file.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • I am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?

    i am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?

    Try erasing the iPod photo cache.
    http://support.apple.com/kb/ts1314

  • Using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

    using sharepoint designer 2013 - connected to sharepoint online - but getting " data source file cannot be saved" after making a new linked datasource

    Hi,
    Based on your description, I have done a test and I can’t reproduce your issue.
    I have used SharePoint Designer 2013 to open a SharePoint Online site and there are no issues.
    I’d like to clarify whether you encounter any issues when accessing SharePoint Online sites. If there are no issues during the accessing procedure, SharePoint Online service should be working fine at your side. The issue may be caused by specific SharePoint
    Designer client or network. I suggest you refer to the following steps to troubleshoot the issue.
    1. Use SharePoint Designer to open another site and check whether it is successful.
    2. When you are prompted to enter Office 365 account and password, try other users’ accounts and select the remembering the credential.
    3. Perform the connection procedure under another environment and verify whether the issue is resolved.
    If the issue persists, can you provide related screenshots for further troubleshooting?
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • I get a message saying "song" cannot be used becaues original source cannot be found?

    I started getting a message saying some of my songs cannot be played because the original source cannot be found. Do you want to locate it?

    my iphone with my computer
    Windows?
    Instructions here >   iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Does Editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

    Does editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

    C5ELEN wrote:
    . Didn't we have that in 7?  Seems like I remember we could set the number of undo levels.
    Legacy FCP has Revert Project to return to the last saved version, and it has Restore Project to go back to one of the autosaved versions. The maximum number of undo's can be set in user preferences. A lot different than X.
    Russ

  • Event structure doesn't handle all events from external DLL source

    Hi!
    I use a DLL, wich handles an USB CAN transceiver device, and generates LabVIEW user events with extcode.h and PostLVUserEvent() function.
    In my vi I use an event case structure to handle theese external events. The problem is, that if the events come too frequently, then it cannot handle all events.
    The vi contains a couple of parallel while loops which process the incoming data from the external event.
    In another application I use the same architecture, and that works fine. This one is more complex.
    Do you think I have reached the limits of the program? Or what else can be the problem?
    I have tried to use a queue in the  event structure, it helped a little, but yet, not all the events are handled. My external DLL sends all event, so the problem is not there.
    Thanks in advance!

    Hi Wasz,
    Thanks for the post and I hope your well.
    It is not possible for the event structure to miss events - it simply queues them up. To keep the event structure 'in time' with the code you must ensure the code to execute in each event is minimal to allow the event structure to handle the next event. 
    Please see this two links:
    event structure buffering: leading to,
    How to avoid built-up for "cursor move" events? : where somone is trying to avoid handling all events.
    What sort of events are not being handled? Could it be an issue your events are not configured correctly? Maybe if you could produce a small example in LabVIEW code, so we can just test the event structure configuration... someone working around the external dll call - which you seem sure is working correctly.  
    In terms of queuing to process the events in other loops is certainly an option to speed up the event structure. To do this, use a produce/consumer design pattern.
    hope this helps,
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • LabView user-event from external dll source

    Hi!
    I'm dealing with the following issue:
    I use a CAN sniffer device, wich sends data over USB to a PC. The main goal is to create a vi that can process the incoming data. I already have a vi wich works with polling mechanism. It calls external DLL functions with the "Call library function node". The main problem is the polling mechanism.
    I would like to recreate this vi so that it would work event-driven. I have an other application, written in C++, that does the same thing, and it gets interrupts from a DLL, when a new data is available in the input buffer.
    The callback mechanism is implemented in the DLL.
    In LabView I would like to do tha same thing. There is the "event case structure", but there is no option for defining such user-events, that i would prefer.
    I have found a similar topic, there the solution is "occurrences". The occurrence is called from a DLL, too. But this solution uses the "waiting for occurrence to set", that is an endless-loop-like thing.
    The other thing I've found is the ActiveX and .NET events. I don't know, probably that is the solution.
    Anyway: is there a possibility to create such events, that can be generated from a simple external DLL and can be handled by "event case structure"? How should I do this?
    Or how NI does this? I mean that NIs DAQ cards must use some similar methods for data processing. Is there some tutorial or support about it?
    Thank you for your answer!

    2716jag wrote:
    Hi Wiebe,         From your answer i have a doubt that What it exactly means "If the dll is used from within LabVIEW". Also i want to know Is there any way to access the functuions defined in the .SYS file in Labview Environment. Regards,Jagan Can you be a litte more specific with your first sentence. I have no good idea what you mean. A .sys driver is usually a kernel device driver. This driver has to be started and run in the kernel subsystem which LabVIEW can not access directly. Such a driver is initialized using the CreateFile() Windows API. The returned handle is then used with other API functions such as ReadFile(), WriteWile(), DeviceIoControl(), and finally CloseHandle().Theoretically you could call all this APIs directly from within LabVIEW using the Call Library Node. In practice you do not want to do this even for fairly simple kernel drivers since the parameters for those APIs do get fairly complex in most cases, and you usually do also want to have some sort of asynchronous operation using events or such to make the driver access user friendly. All these things are most easily handled in a user space DLL written in C that exports a more LabVIEW friendly API that you can then import into LabVIEW using the Call Library Node. Usually most kernel device drivers do come with a accompagning user space DLL already, as this is the only sensible way of accessing such a driver. So you can usually look for the documentation of that user space DLL API and go from there trying to import that into LabVIEW using the Call Library Node. Even then it may not be easy at all if that API uses complicated function parameters and even completely impossible if it uses callbacks or such, requiring you to write a so called wrapper DLL that translates between the native API and a more LabVIEW friendly API.  You don't have to believe me but I can guarantee you that if writing such a user space DLL or wrapper DLL is beyond your capabilities, trying to go directly about accessing the Windows APIs in LabVIEW to access a kernel device driver is going to make you squirm in real pain. And those knowing how to write such a DLL would never even consider spending the time to try to access a kernel device driver directly from LabVIEW. Rolf Kalbermatter

  • Error message The volume for "linen.jpg" cannot be found.

    Hi Community,
    I have a number of photos in my library that appear in the photos and events, but if I try to edit it, copy it, move it, or link my other desktop to my laptop iphoto where these photos live, I get a message that says the volume cannot be found.
    Then if I click edit, I get another message that reads
    Image Cannot be Edited
    The original is offline.
    Can anyone tell me how to fix this?
    I no longer have the original files to re import.
    Thanks!
    Lee

    You get that message when the library is a "referenced" library and the source file is not where it was when it was originally imported into the library. Check the iPhoto Advanced preference pane to see if you're running a managed or referenced library.
    What version of iPhoto and system are you running?
    OT

Maybe you are looking for