Event id 20022: the entity all management server resource pool is not heartbeating after creating pools

hello
I have created tow resource pools for our servers and now I see in event viewer the event ID 20022 for 3 default resource pools like this:
 the entity "all management server resource pool" is not heartbeating
 the entity "AD assignement resource pool" is not heartbeating
 the entity "Notification resource pool" is not heartbeating
but for own 2 pools there is no event. also in SCOM console there is lots of active alerts about resource pool heartbeat failure.
what should I check or do?

Hi,
From my point of view, this may be caused by insufficient resources - the management server getting overloaded or having connectivity issues to the database.
Here is an article for your reference regardign to the error, please go through it:
http://operationsmanager2012.blogspot.ca/2012/12/all-management-servers-resource-pool.html
In addition, did you add your Management servers to those two resource pool? The below link is about how to create resource pool, hope this can be helpful:
http://technet.microsoft.com/en-us/library/hh230706.aspx
And this link below is about Automatic and Manual Resource Pools in Operations Manager 2012:
http://www.systemcentercentral.com/automatic-and-manual-resource-pools-in-operations-manager-2012-scom-sysctr/
Regards,
Yan Li
Regards, Yan Li

Similar Messages

  • Critical error All management server resource pool

    I just receive critical error: All management server resource pool in scom 2012 management console.
    Alert detail:
    Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
    The following error(s) were encountered:
    Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
    One or more workflows were affected by this.
    Workflow name: Subscription3f818422_f4a1_42aa_b1b3_8bc14eb54cd8
    Instance name: Alert Notification Subscription Server
    Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
    Management group: SCOM_2012
    What is problem and how to fix it ? I haven't changed any setting in scom !!

    Only found some of error and warning in operation manager event log.
    Error:
    Source: Health Service Modules
    Event ID: 22406
    Task Category: NOne
    The PowerShell script failed with below exception
    System.Management.Automation.CmdletInvocationException: The following error occurred while loading the extended type data file:
    Microsoft.PowerShell, C:\Program Files\System Center Operations Manager 2012\Powershell\OperationsManager\.\OM10.CoreCommands\Microsoft.EnterpriseManagement.Core.Cmdlets.Types.ps1xml : File skipped because it was already present from "Microsoft.PowerShell".
    At line:8 char:66
    +               if (!(Get-Module OperationsManager)) {Import-module <<<<  $SCOMModulePath}
       at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
       at System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
       at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
    Script Name: Discover Agent Versions
    One or more workflows were affected by this. 
    Workflow name: ManagementGroupDiscoveryAgentVersions
    Instance name: Operations Manager Management Group
    Instance ID: {6B1D1BE8-EBB4-B425-08DC-2385C5930B04}
    Management group: SCOM_2012
    Error:
    Source: HealthService
    Event ID: 15002
    Task Category: Pool Manager
    The pool member cannot send a lease request to acquire ownership of managed objects assigned to the pool because half
    or fewer members of the pool acknowledged the most recent initialization check request. The pool member will continue
    to send an initialization check request.
    Management Group: SCOM_2012
    Management Group ID: {56D0B0FE-FB03-2A6C-E3F6-54287D96855D}
    Pool Name: AD Assignment Resource Pool
    Pool ID: {529CF61E-A357-5AED-73CC-81D48E4327CA}
    Pool Version: 7607127134982980644
    Number of Pool Members: 2
    Number of Observer Only Pool Members: 1
    Number of Instances: 1
    Error:
    Source: HealthService
    Event ID: 15002
    Task Category: Pool Manager
    The pool member cannot send a lease request to acquire ownership of managed objects assigned to the pool because half
    or fewer members of the pool acknowledged the most recent initialization check request. The pool member will continue
    to send an initialization check request.
    Management Group: SCOM_2012
    Management Group ID: {56D0B0FE-FB03-2A6C-E3F6-54287D96855D}
    Pool Name: Notifications Resource Pool
    Pool ID: {3F9F97EA-E584-B0EE-A4C9-78A86FB4F21F}
    Pool Version: 7607127134982980644
    Number of Pool Members: 2
    Number of Observer Only Pool Members: 1
    Number of Instances: 1
    Error:
    Source: HealthService
    Event ID: 15002
    Task Category: Pool Manager
    The pool member cannot send a lease request to acquire ownership of managed objects assigned to the pool because half
    or fewer members of the pool acknowledged the most recent initialization check request. The pool member will continue
    to send an initialization check request.
    Management Group: SCOM_2012
    Management Group ID: {56D0B0FE-FB03-2A6C-E3F6-54287D96855D}
    Pool Name: All Management Servers Resource Pool
    Pool ID: {4932D8F0-C8E2-2F4B-288E-3ED98A340B9F}
    Pool Version: 7607127134982980644
    Number of Pool Members: 2
    Number of Observer Only Pool Members: 1
    Number of Instances: 116
    Warning:
    Source: Health Service Modules
    Event ID: 10103
    Task Category: None
    The Windows Event Log Provider has resumed processing the Operations Manager event log on computer 'HKWOMM01.ap.zurich.com' after recovering from errors.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.SystemCenter.CM.AEM.Modules.EventCollection
    Instance name: HKWOMM01.ap.zurich.com
    Instance ID: {BF86169C-4A71-C728-9649-338260E86093}
    Management group: SCOM_2012
    Warning:
    Source: Health Service Modules
    Event ID: 10103
    Task Category: None
    In PerfDataSource, could not resolve counter instance OpsMgr DW Writer Module, Avg. Batch Processing Time, ms, All Instances. Module will not be unloaded.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.SystemCenter.DataWarehouse.CollectionRule.Performance.Writer.AvgBatchProcessingTime
    Instance name: HKWOMM01.ap.zurich.com
    Instance ID: {BF86169C-4A71-C728-9649-338260E86093}
    Management group: SCOM_2012
    Warning:
    Source: Health Service Modules
    Event ID: 10103
    Task Category: None
    In PerfDataSource, could not resolve counter instance OpsMgr DW Writer Module, Batches/sec, All Instances. Module will not be unloaded.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.SystemCenter.DataWarehouse.CollectionRule.Performance.Writer.BatchesPerSecond
    Instance name: HKWOMM01.ap.zurich.com
    Instance ID: {BF86169C-4A71-C728-9649-338260E86093}
    Management group: SCOM_2012
    Warning:
    Source: Health Service Modules
    Event ID: 10103
    Task Category: None
    In PerfDataSource, could not resolve counter instance LogicalDisk, Current Disk Queue Length,
    \\?\Volume{9470dbf8-09e8-11e1-887f-806e6f6e6963}. Module will not be unloaded.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.Windows.Server.2008.LogicalDisk.CurrentDiskQueueLength.Collection
    Instance name:
    \\?\Volume{9470dbf8-09e8-11e1-887f-806e6f6e6963}
    Instance ID: {80A7A920-B571-987C-9B3B-DE2164998AB9}
    Management group: SCOM_2012
    Warning:
    Source: Health Service Modules
    Event ID: 10103
    Task Category: None
    In PerfDataSource, could not resolve counter instance OpsMgr DW Synchronization Module, Avg. Batch Processing Time, ms, All Instances. Module will not be unloaded.
    One or more workflows were affected by this. 
    Workflow name: Microsoft.SystemCenter.DataWarehouse.CollectionRule.Performance.Synchronization.AvgBatchProcessingTime
    Instance name: b9e5cd4c-1b78-4530-b93f-69806d14d7f3
    Instance ID: {E6A569EF-6527-2B26-8345-2E16F0979064}
    Management group: SCOM_2012

  • Resource Pool Heartbeat Failure from All Management Server Resource Pool Watcher

    
    Hi,
    In my environment, I add another SCOM 2012 R2 to existing management group. (old SCOM is 2012 R2 ->SCOM1)
    We have one SMS provider in SCOM1, after added SCOM2 in the Event Viewer we have Event ID
    21400. I googled and in the Administration tab for Notification Pool and AD Assignment Pool change the member ship form Automatic to Manual and remove SCOM2 from those, finally Error 21400 is resolved. But every hours in the active alerts shows
    Resource Pool Heartbeat Failure from All Management Server Resource Pool Watcher.
    Another problem is :
    in the active alerts select a critical or warning or information in the Alert Details shows in just SCOM2:
    This Page can’t be displayed
    Make sure the web address is correct.
    Look for the page with your search engine.
    Refresh the page in a few minutes.
    thanks 

    Hi,
    Based on my research, when management
    server running windows server 2008 operating system, we may experience Random
    Resource Pool
    Heartbeat Failures.
    Did you add a new management server with windows
    server 2012 O.S?
    Please also try to restart operation manager services related and check the result.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Unable to change all management server resource pool membership to manual

    SCOM2012R2
    I follow the instruction in the article below trying to change the membership from automatic to manual for "all management servers resource pool", but the "manual membership" option is greyed (cannot be clicked).
    http://technet.microsoft.com/en-us/library/hh230706.aspx
    Do I have to use the powershell command to set it to manual?
    Also, noticed there was an issue after a MS is removed from AMSRP in scom2012sp1. Is it still the case in scom2012r2?

    Hi
    Yes, you have to use PoSh to set the resource pool to manual (and also automatic), see this link here
    http://www.systemcentercentral.com/automatic-and-manual-resource-pools-in-operations-manager-2012-scom-sysctr/
    Then you have to update the RunAs accounts because they are targeted at the AMSRPT The data warehouse run-as accounts are configured by default to only distribute to the All Management Servers resource pool. There is no runtime method to distribute the account
    to all management servers automatically. When the management server is removed from the All Management Servers resource pool the data warehouse account is no longer distributed to it, therefore any workflows requiring this account will fail and unload. The
    failing and unloading of the workflows will cause the management server to become grayed out. Cheers, Stefan
    Blog: http://blog.scomfaq.ch

  • What is the OMS(Oracle Management Server) ?

    Hi All,
    Anyone can explain me what is the OMS (Oracle Management Server)
    in Oracle Enterprise Manager(OEM),may be it is the server where OEM resided on when install program I'm not sure?
    Thank you,
    Mcka

    Enterprise manager has two ways of operating: direct attach and three-tier
    In Oracle9i, the direct attach is 'stand alone console'. In 10g it is 'db console'
    In Oracle9i, the three tier is using an OMS. In 10g, it is called the grid control.
    Basically the OMS or Grid Control has the following configuration:
    - On each database server, there is an Enterprise Manager Agent. It 'manages' all database instances on that server;
    - there is a central application server (Oracle Management Server/OMS) that communicates with all agents. It tells the agent to performan actions (such as collecting operating stats) and it gets the results from those actions;
    - there is a central OMS repository (schema in a database) used the the OMS, that is used to store configuration and information retrieved by the agents;
    - the OMS responds to user (administrator) requests from the [9i] java console or the [10g] browser. The requested information may be retrieved from the repository or retrieved in real time directly from the instance via the agent.
    The OMS can be installed on any machine. The OMS repository can be installed on any machine with a database instance.
    Often the database, the OMS and the OMS repository are both installed on a single 'DBA-only machine'. (This makes sense as the information collected could have a SarbOx impact.)

  • There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)

    Hi there,
    When I'm trying to manage spaces in SAP Business Objects Explorer 4.1 SP04, I'm getting the following error:
    Failed to retrieve the data source list.
    There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)
    For input string: "false"
    I've already restart Explorer servers (Explorer Exploration Server, Explorer Indexing Server, Explorer Master Server and Explorer Search Server) and rebooted the server where Explorer is installed.
    Nothing seems to fix this error message. I'm not able to create new spaces because I cant access the sources:
    I'd appreciate some help !
    Thanks in advance

    HI Pavan,
    Admin is on the Administrators Group, which as Full Control on the Explorer Application
    I think this worked on the day the Explorer was installed (past week).
    Since them never worked.

  • How to apply  special right  to the PDF  file using the LiveCycle Rights Management Server.?

    How to apply special right to the PDF  file using the LiveCycle Rights Management Server.?
    I want  to edit bar code field data using Adobe Reader. Bar Code field was designed and data was changing using Acrobat X1 Professional (Trial Version). But can't do so in adobe reader.

    I think that product has nothing to do with it. You would use LiveCycle Reader Extensions.

  • Start all managed server with nodemanager wls 8.1

    Hi,
    I've configured nodemanager in my environment, now I'd like to restart all managed servers at boot time. I've created a script that start the nodemanager process at boot time but I didn't found any properties to automatically restart all managed servers.
    How can I do it ?
    Thank you.
    Fanelli Massimiliano
    [email protected]

    Great!
    I had the same error: when starting UCM on WL Console, it starts and says Running. But when accessing it on the browser receive the error 404. In the other hand, when starting with Commands, it force shutdowns.
    I have set the StartScriptEnabled property to true, now I can start UCM only on the command Line, to start it on WL Console, I have to manually start the node manager.
    Is there a way/script to start the node manager automatically?
    Regards,

  • What's the function of the null transactional manager server?

    how to use the null transactional manager server?

    If you need to call a service while in a transaction, but that service
    does not use a resource manager (database), then it should be in a group
    with the null TMS.
    If it is a leaf service, you could call it with TPNOTRAN, but if it has
    to call other services that are part of the transaction, then it too
    must be part of the transaction.
    The first service called by a client that initiated a transaction will
    become the coordinator, so it needs to have a TMS even if it is not
    using a database.
         Scott Orshan
         BEA Systems
    wangming wrote:
    >
    how to use the null transactional manager server?

  • The user function manager DLL (ufmanager.dll) could not be found.

    Hi Everyone,
    I just spent two horrible days getting a Windows 2003 server to run our .net 2008 asp Crystal report.  It was all because of the unknown.rpt error.  The final answer was to give the NETWORK SERVICE account full control to the C:\ and then remove that permission. 
    Now, I'm up to my next challenge:
    Error in File C:\WINDOWS\TEMP\CrystalReport {2A76C903-674A-4A7B-AA04-44FC7E206C3F}.rpt:
    The user function manager DLL (ufmanager.dll) could not be found.
    That dll is there on the server.  What should I do?
    Please help!!!!
    Thanks,
    Ed

    Ok, here is where the fun begins as the issue you are getting is not something I've run into before. A few clarifications and suggestions re. troubleshooting.
    I used the latest runtime.msi
    - confirm this was CRRedist2008_x86.msi (just want to be sure)
    pdf about the unknown.rpt.
    - do you have a link or name of the pdf?
    To troubleshoot let's do this:
    1) Download the depends utility. I want to see if there is a missing dependency. depends is here:
    http://www.dependencywalker.com/
    open the ufmanager.dll in depends and see what it reports.
    2) Run Process Monitor utility. ProcMon can be downloaded from here:
    http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx
    Make sure you filter ProcMon for your process as this will shrink the log file. Then look for ufmanager.dll and see where the app is trying to load it from.
    3) Check this registry entry:
    HKLM\software\business objects\10.5\crystal reports
    See that CommonFiles is pointing to c:\program files\business objects\common\2.8\bin.
    4) Copy the ufmanager.dll from c:\program files\business objects\common\2.8\bin to your app directory (this is just a test as I want to see if we can load the dll from anywhere...)
    Ludek

  • "itunes could not contact the ipod software update server because you are not connected to the internet" Help?

    Hello all, new to the forums.
    I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
    I've already scanned through numerous websites and forums for help, but none of them worked.
    This  set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
    # Open Internet Options from control panel.
    # Click the Connections tab.
    # Click the LAN Settings button.
    # Select the Automatically detect settings checkbox.
    Others include installing IE7, which that didn't work either.
    Can anyone help?

    Here it is:
    Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
    LENOVO 2537FC4
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 003DB3100363E3C0
    Current user is not an administrator.
    The current local date and time is 2011-06-16 17:03:57.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA NVS 3100M
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.3.1.55 (x64) is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
    Description:          Intel(R) Centrino(R) Advanced-N 6200 AGN
    IP Address:          192.168.0.3
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.0.1
    Lease Obtained:          Thu Jun 16 16:54:56 2011
    Lease Expires:          Fri Jun 17 16:54:56 2011
    DNS Servers:          192.168.0.1
                        68.94.156.1
    Adapter Name:          {610821DE-0532-4C65-839B-B74B65859FBA}
    Description:          Intel(R) 82577LM Gigabit Network Connection
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 16:00:00 1969
    Lease Expires:          Wed Dec 31 16:00:00 1969
    DNS Servers:
    Adapter Name:          {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
    Description:          Bluetooth Device (Personal Area Network)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 16:00:00 1969
    Lease Expires:          Wed Dec 31 16:00:00 1969
    DNS Servers:
    Active Connection:          Broadband Connection
    Connected:          No
    Online:                    No
    Using Modem:          Yes
    Using LAN:          No
    Using Proxy:          No
    SSL 3.0 Support:          Enabled
    TLS 1.0 Support:          Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-06-16 15:35:33.

  • The Sun Java Application Server 8.1 could not start anymore

    Very incredible I was working fine from may days with Stydio Creator 2
    but yesterday I run the project and it does not work anymore, please can you suggest something:
    The Sun Java Application Server 8.1 could not start.
    from the Output console:
    C:\Sun\Creator2\SunAppServer8\bin\asadmin.bat start-domain --domaindir C:\Sun\Creator2\SunAppServer8\domains\ creator
    Failed to start server localhost:4848
    Deployment error: Failed to start server localhost:4848. See the server log file for details.
    Exception=Deployment error: Failed to start server localhost:4848. See the server log file for details.
    Deployment error: Failed to start server localhost:4848. See the server log file for details.
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
    at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
    at org.apache.tools.ant.Task.perform(Task.java:364)
    at org.apache.tools.ant.Target.execute(Target.java:341)
    at org.apache.tools.ant.Target.performTasks(Target.java:369)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
    at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
    at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
    at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
    at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
    Caused by: Failed to start server localhost:4848
    at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:152)
    ... 10 more
    and in the log file:
    [#|2006-02-24T11:49:51.296+0100|WARNING|sun-appserver-pe8.1_02|
    javax.enterprise.system.core|_ThreadID=25;|CORE5061: Exception :
    com.sun.appserv.server.ServerLifecycleException: [C4073]: A JMS destination limit was reached.
    Too many Subscribers/Receivers for Queue :
    temporary_destination://queue/192.168.0.159/3376/2 user=admin, broker=127.0.0.1:27676(2403)
         at com.sun.enterprise.jms.JmsProviderLifecycle.onTermination(JmsProviderLifecycle.java:476)
         at com.sun.enterprise.server.ApplicationServer.onTermination(ApplicationServer.java:454)
         at com.sun.enterprise.server.Shutdown.startShutdown(Shutdown.java:42)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.invokeShutdownEventListener(AdminEventMulticaster.java:1445)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.handleShutdownEvent(AdminEventMulticaster.java:1434)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:443)
         at com.sun.enterprise.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:139)
         at com.sun.enterprise.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:90)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
         at sun.rmi.transport.Transport$1.run(Transport.java:153)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
         at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
         at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
         at java.lang.Thread.run(Thread.java:595)
    thanks

    I just had the same problem this morning. I believe the app server starts and if you browser directly to your app you'd get it, but the connection between the appserver and the IDE is somehow lost. An easier solution than completely reinstalling for me was to delete the .Creator folder in my home directory (C;|Documents and Setting\<username>\.Creator) and restart Creator

  • I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
    Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

  • ITunes could not contact the iPhone software update server because you are not connected to the internet...???

    Ok I’m completely lost here....
    I’m running Microsoft Windows XP Home Edition Service Pack 3 (Build 2600), I updated iTunes to 11.0.2.25 and some other updates for windows last night on my laptop. I try connecting to download the iOS 6.1.2 update for my iPhone 4 and my iPhone 5 via iTunes. I am getting this message for both "iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connection is active and try again." Everything was fine with connecting prior to running these updates because I downloaded the 6.1 update with no problems when it came out.
    What I have done so far with which has made no difference:
    Checked my internet connection
    Changed my internet connection
    Signed out of iTunes and then signed back in
    Ran diagnostics via iTunes, comes back with: Network interfaces verified- Internet connection failed- Secure link to iTunes store verified
              Connection attempt to Apple web site was successful.
              Connection attempt to browsing iTunes Store was successful.
              Connection attempt to purchasing from iTunes Store was successful.
              Connection attempt to iPhone activation server was successful.
              Connection attempt to firmware update server was successful.
              Connection attempt to Gracenote server was successful.
              Last successful iTunes Store access was 2013-02-20 20:40:48.
    Disabled firewall, spy sweeper, virus scanner
    start>run>cmd> typed "netsh winsock reset"
    Rebooted
    Checked the parental controls in iTunes
    Start>control panel>internet options>connections tab> lan settings> selected the "automatically detect settings"
    Deleted iTunes and reinstalled iTunes
    When I would "ping gs.apple.com" it would come back with "request timed out" no matter what internet connection I was on, so I went into the hosts file  start>my computer>(C:)>WINDOWS>system32>drivers>ect>HOSTS and added  "#     127.0.0.1     gs.apple.com". Now it will ping gs.apple.com just fine but still comes up with the "iTunes could not contact the iPhone software update server because you are not connected to the internet" message in iTunes when i try to download the update.
    If anyone can come up with any ideas that I haven’t tried, please let me know. This is keeping me back from updating both of my phones along with if anything should ever happen to them; restores as well. 

    im computer is connected i can go to the apple store through itunes but when i plug my phone in i keep getting that alert... i plugged my phone in to update it after the apple loaded the itunes icon and a usb showed up.

  • Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

Maybe you are looking for

  • How to Play videos on my TV iPhone 4S

    My new 4S will not stream video to my tv. I am using a HDMI dock. My other iPhone 4 works perfectly. The new 4S works for a minute then video starts to scramble picture and then stops. Looks like it should work says "sending video to TV". Also my new

  • My 6th gen Ipod nano does not show up in Itunes or in My Computer

    I do not think that this is a problem with my computer because I own an older 5th gen nano and have never had problems with it before. Both my computer and Itunes has no problem seeing the older Ipod right now. I have followed the troubleshooting gui

  • What is the best way to call a report from within a report

    What is the best way to call a report from within a report(master / Detail concept) A type of drill down report Oracle Database 10g Forms 10.1.2.0.2 Report Builder 10.1.2.0.2

  • Info about

    Hi, Presetnly I am working with FBL1N  Transaction. Vendor Line Item Display. I would like some one to elaborate on that the usage of this transaction  FBL1N. Actually when I am passing the Vendor A/c it should be posted to WBS element, but it is get

  • Printing Problems with Acrobat Pro 9.5 for Mac

    I have Acrobat pro 9.5 for Mac.  I'm using a Canon MG8150 multi-function printer.  Everytime I try to print from Arobat Pro I get an error message.  Any suggestions?  I can print my pdfs from Apple Preview; so it's not the document or the printer.