Event ID 33020 LS Centralized Logging Agent - Error while moving cache files to network share

I have the "AlwaysOn" CLS logging scenario running in my Lync 2013 Enterprise deployment.  I did not configure the CacheFileNetworkFolder option since i don't care about retaining these logs anywhere other than on the local drives of the Lync
servers so i just left it blank.  Now every few hours or so I am getting Event ID 33020 in each Lync server and SCOM is firing an alert as well.
The CsClsLogging configuration is as follows:
PS C:\> Get-CsClsConfiguration
Identity                      : Global
Scenarios                     : {Name=AlwaysOn, Name=MediaConnectivity, Name=ApplicationSharing,
                                Name=AudioVideoConferencingIssue...}
SearchTerms                   : {Type=Phone;Inserts=ItemE164,ItemURI,ItemSIP,ItemPII,
                                Type=URI;Inserts=ItemURI,ItemSIP,ItemPII,
                                Type=CallId;Inserts=ItemCALLID,ItemURI,ItemSIP,ItemPII,
                                Type=ConfId;Inserts=ItemCONFID,ItemURI,ItemSIP,ItemPII...}
SecurityGroups                : {}
Regions                       : {}
EtlFileFolder                 : C:\CLSTracing
EtlFileRolloverSizeMB         : 20
EtlFileRolloverMinutes        : 60
TmfFileSearchPath             : C:\Program Files\Common Files\Microsoft Lync Server 2013\Tracing\
CacheFileLocalFolders         : C:\CLSTracing
CacheFileNetworkFolder        :
CacheFileLocalRetentionPeriod : 14
CacheFileLocalMaxDiskUsage    : 80
ComponentThrottleLimit        : 5000
ComponentThrottleSample       : 3
MinimumClsAgentServiceVersion : 6
Is there a way to stop the flow of these events without having to configure CLS to transfer the logs to a network share?

Yes, the CacheFileLocalFolders path of 'c:\CLSTracing' is valid on all the Lync servers.  The AlwaysOn scenario is started, running and producing .hdr & .cache files in this folder on all servers across my front-end, director and edge pools.  
In addition, i am able to search for and extract, valid logging information that i can analyze using Snooper.exe.
Reconfigure the CentralizedLoggingConfiguration how???
Tried setting the CacheFileNetworkFolder value to null by running: Set-CsClsConfiguration -CacheFileNetworkFolder $null  and then restarting the CLS agent.  As expected, event 33037 fired confirming the settings were received from the CMS.
New config received from CMS
Following are the changed settings:
EtlFileRolloverSizeMB: Old - NULL, New - 20
CacheFileLocalRetentionPeriod: Old - NULL, New - 14
CacheFileLocalMaxDiskUsage: Old - NULL, New - 80
ComponentThrottleLimit: Old - NULL, New - 5000
ComponentThrottleSample: Old - NULL, New - 3
MinimumClsAgentServiceVersion: Old - NULL, New - 6
TmfFileSearchPath: Old - NULL, New - C:\Program Files\Common Files\Microsoft Lync Server 2013\Tracing\
CacheFileLocalFolders: Old - NULL, New - C:\CLSTracing
CacheFileNetworkFolder: Old - NULL, New -
SearchTerms: Old - NULL, New - Type=Phone;Inserts=ItemE164,ItemURI,ItemSIP,ItemPII,Type=URI;Inserts=ItemURI,ItemSIP,ItemPII,Type=CallId;Inserts=ItemCALLID,ItemURI,ItemSIP,ItemPII,Type=ConfId;Inserts=ItemCONFID,ItemURI,ItemSIP,ItemPII,Type=IP;Inserts=ItemIP,ItemIPAddr,ItemIPv6Addr,ItemURI,ItemSIP,ItemPII,Type=SIPContents;Inserts=ItemSIP
Scenarios Added:
  Scenario: Name - AlwaysOn
    Provider List:...................... omitted to save space.

Similar Messages

  • ORA-01012: not logged on error while Moving data file with BrTools

    Hi,
        I'm trying to move a data file to another windows drive with BrTools.
    It fails before it actually starts to move the file. The error it shows is:
    ORA-01012: not logged on.
    Thanks,
    Anil.

    Hi,
    BRSPACE  has a command option -u to specify the Database user and password. How ever BRSPACE connects to the database as SYSDBA, you do not have to specify the user and password if the operating system user belongs to the dba group.SO check if the user is falling in DBA group with proper authorizations.
    PLease reward points for useful answers.
    Regards,
    Phani

  • LS Centralized Logging Agent Event ID 33041

    I am seeing the following error very frequently on all my Lync servers that are running the CLS agent:
    LS Centralized Logging Agent Event ID 33041
    Lync Server Centralized Logging Service Agent Service was unable to convert etl trace record(s) to cache record(s) due to missing message formats and lost these record(s) permanently
    Cache file path: C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\Tracing\CLS_WPP_10-13-2014-17-21-13.cache
    Missing message format(s): 1
    d4626f10-6a45-af12-1218-c8e7bb881225(95)
    Cause: Lync Server Centralized Logging Service Agent uses default.tmx file to convert ETL records to binary cache file records. If it can't find the message format information for a record it will be unable to determine the data types of the insert data for
    the record and the insert data will be lost.  This can happen if the default.tmx file is out of sync with respect to the code generating the .ETL records.
    Resolution:
    Verify that default.tmx file is current and update the default.tmx file if necessary. Check if there are any private bits installed causing default.tmx to be out of sync
    It appears the errors started with the install of the August CU updating Lync to 5.0.8308.738.  Note, this error is with CLS, not Lync Debugging tools.  I have verified that ClsAgent.exe is using C:\Program Files\Common Files\Microsoft
    Lync Server 2013\Tracing\default.tmx, which is 23041 KB and dated 8/3/2014.
    Anyone else seeing this?  Anyone have a fix?

    I'm experiencing this issue also.  I've updated to latest CU and fixed the agent not starting issue.  Now the agents run, and I can see the cache files growing.  But I get this blowing up the event log:
    Lync Server Centralized Logging Service Agent Service was unable to convert etl trace record(s) to cache record(s)
    due to missing message formats and lost these record(s) permanently
    Cache file path: C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\Tracing\CLS_WPP_03-05-2015-16-00-53.cache
    Missing message format(s): 2
    68fdd900-4a3e-11d1-84f4-0000f80464e3(66)
    68fdd900-4a3e-11d1-84f4-0000f80464e3(64)
    Cause: Lync Server Centralized Logging Service Agent uses default.tmx file to convert ETL records to binary
    cache file records. If it can't find the message format information for a record it will be unable to determine the data types of the insert data for the record and the insert data will be lost.  This can happen if the default.tmx file is out of sync
    with respect to the code generating the .ETL records.
    Resolution:
    Verify that default.tmx file is current and update the default.tmx file if necessary. Check if there are any
    private bits installed causing default.tmx to be out of sync
    Log files created with Search-CsCLSLogging -Output "myfile.log"  produce this event and create an empty file.
    I've tried copying the default.tmx from the Tracing folder to the Debbing folder, as suggested in other posts, but have the same results.
    Interestingly, I can stop the agent service, and run the old OCSLogger Logging Tool program and can produce valid log files.
    Any suggestions?

  • Logging java errors to a text file, please help.

    Could someone please advise how to log java errors to a text file?
    I know from Window you can do to "ANY COMMAND > C:\log.txt and the output will send to the log.txt text file.
    However, how do you log errors when you run java filename? Wish I could just copy and paste from my Window command prompt screen.
    I am just trying to post the errors I receive to the forum.
    Thanks,

    user_s8721301 wrote:
    ..Wish I could just copy and paste from my Window command prompt screen.(from memory) Drag the mouse diagonally across the text in the DOS prompt, then hit 'enter'. The selected text should be on the clipboard, ready to paste.

  • Error while creating control file

    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sql
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1  CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS  froce logging NOARCHIVELOG
    2      MAXLOGFILES 32
    3      MAXLOGMEMBERS 2
    4      MAXDATAFILES 32
    5      MAXINSTANCES 16
    6      MAXLOGHISTORY 1752
    7  LOGFILE
    8  GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA'  SIZE 50M,
    9    GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA'  SIZE 50M,
    10   GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG'  SIZE 25M,
    11*   GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG'  SIZE 25M
    SQL>

    CHETAN YADAV wrote:
    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
    2 MAXLOGFILES 32
    3 MAXLOGMEMBERS 2
    4 MAXDATAFILES 32
    5 MAXINSTANCES 16
    6 MAXLOGHISTORY 1752
    7 LOGFILE
    8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
    9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
    10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
    11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
    SQL>

  • ERROR, while i importing file in Integration Builder/

    Heading 2: HI every body !!!!
    please help me.
    Now' i'm integrate SAP r/3 and IBM MAXIMO via SAP XI3 (SAP netweaver 2004s)
    i need to import file to integration builder, while i'm importing it, I'"ve got the error:
    ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
    sapmaximo\sapmnt\IPC\SYS\global\security\data\SecStore.properties" does not exist although it should..
    Also i did PrtSc
    Link:[http://ipicture.ru/Gallery/Viewfull/17818229.html]
    I am a beginner in sap netweaver please tell how to solve this step byb step

    I need to import file (XI3_0_IMEA-INTEGRATE_IMEA71-mySAPERP2005_of_ibm.com_5.tpz),it''s in another format , so
    i find on this forum the same error Link: [Error while generating Rules in GRC5.3  RAR Component;
    the solution of this error ---"
    Another reason for this error can be lack of resources or pool size of the server. The recommended settings for the Pool size are :
    Max Pool size : 50
    Max connections : 100
    Connection Timeout : 10 sec
    Max wait time : 30 sec"
    Can you tell me where i can configurate this settings? (step by step)

  • Error while retreiving xml file from database

    Hi-
    I am trying to configure Planning and getting the following error message at instance configuration step:
    "Error while retreiving xml file from database"
    We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
    Here is the contents of the configtool error file:
    (Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
    (Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
    (Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
    (Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    Thanks for any help.

    After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
    Here is another quote from SharedServices_Security.log
    2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
    2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
    2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
    2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
    2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
    2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
    2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
    2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
    2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
    2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
    2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
    2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

  • Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

    Hi Planning installation Gurus,
    Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
    OS: Vista Premium
    SQL Server 2005
    Essbase:9.3.1
    Error Message: "System Failure: Error while retrieving xml file from database"
    Details of error:::::::::::::::::::::::::
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    Pls provide Solution

    Hi John,
    though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=windowsAuthentication
    SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
    SYSTEM_DB_CATALOG=plandb
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    my steps:
    Using SQL Server Management Studio
    Changed Widows authentication to SQL server authentication mode
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    To restart SQL Server from SQL Server Management Studio
    To enable the sa login by using Management Studio
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.}}}
    anything else should i change.................

  • Javax.mail.MessagingException: 451 Error while writing spool file??

    Hi all friends,
    Can any one plz tell me why Iam getting below error when Iam trying to send mail with attachment.Iam using Java Mail API.
    javax.mail.MessagingException: 451 Error while writing spool file
    Plz tell me what are the reasons behind it.
    Regards
    Bikash

    The problem here is that the SMTP server was unable to write its spool file.
    The error is probably on the OS side of things and has nothing to do with email except that the lack of the system resource is causing email to fail.
    Have the server admin take a look at his error log to find out why the the user that smtp is running as could not write the file.

  • Error while converting class file to exp and jca file

    error while converting *.class file to *.exp and *.jca file
    =====================================================================================================================
    linux-y60u:/home/admin/java_card_kit-2_2_1/samples/src # converter -exportpath "/home/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/HelloWorld 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/HelloWorld.class
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/Identity.class
    error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file format of version 50.0.
    error: com.sun.javacard.samples.HelloWorld.Identity: unsupported class file format of version 50.0.
    conversion completed with 2 errors and 0 warnings.
    =====================================================================================================================

    i compile a file javacard use this command:
    ===
    javac -source 1.3 -target 1.1 -g -classpath ./classes:../lib/api.jar:../lib/installer.jar src/com/sun/javacard/samples/Identity/Identity.java
    ===
    and try to convert this class use this command
    ===
    /home/xnuxerx/admin/java_card_kit-2_2_1/bin/converter -exportpath "/home/xnuxerx/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/Identity 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    ===
    result convert:
    ===
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/xnuxerx/admin/java_card_kit-2_2_1/samples/classes/com/sun/javacard/samples/Identity/Identity.class
    converting com.sun.javacard.samples.Identity.Identity
    error: export file framework.exp of package javacard.framework not found.
    conversion completed with 1 errors and 0 warnings.
    ===
    why ??
    please your comment for this problem.
    thank 4 all.

  • Error while deleting a file which is in a folder which inturn in workspace

    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    --- Problem summary: ---
    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    I am getting above error while deleting a file which is in a folder which inturn in workspace

    Here is the problem I have with deleting my folder. I had created a WD project TaxTool and and added the DC to my SC. There were obviously some checkedout activities. Being new to this, I deleted the project directly without checking in the activities. Now I have folder TaxTool/_comp with nothing underneath on the DTR server and on my client. I am unable to checkout TaxTool for delete but the checkout of _comp folder fails in NWDS with the following error:
    <b>EDIT  (FAILED: server response: Conflict [(pre||post)-condition failed: x:no-exclusivity-with-existing-checked-out-resources])  comp   (C:\JDI\JDIDEMO1\intelJDI_TEST\dev\inactive\DCs\intel.com\TaxTool\_comp\)</b>
    If I try the same from the DTR shell, I get this following error:
    <b>Unexpected problem occurred during executing command.Lockfile "C:\Documents and
    Settings\bvedamur\.dtr\.syncdbs\5b0d8b2110a7a29883734c0407462df8.syncdbM.lock" is already in use by another process.</b>
    I am the only user in the system (doing R&D) and I have tried Sync and Delete. Nothing works. Help appreciated.
    Thx
    Bhaskar

  • EXPORT XFA error while writing XFA files

    Hello Experts,
    We are facing an error while exporting to PDF from BEx report.
    We are on EP7 SP14. BI on SP16.
    After the report is displayed and Export to PDF button is clicked, a new window opens which shows following:
    1. Error:
    Message: No message was provided.
    Stack trace: java.lang.NullPointerException
    at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
    at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
    at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
    at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
    at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
    at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
    at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
    at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
    at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
    :33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Message: EXPORT XFA error while writing XFA files
    Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: EXPORT XFA error while writing XFA files
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:311)
    at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
    at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
    at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
    at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
    at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
    at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
    :33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: java.lang.NullPointerException
    at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
    at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
    at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
    2. Message:
    No metadata is available for "DISABLE_NAVIGATION":
    <parameterList>
      <param name="BI_COMMAND_TYPE" value="OPEN_DIALOG_DISABLE_NAVIGATION"/>
      <param name="TARGET_DIALOG_REF" value="DISABLE_NAVIGATION"/>
    </parameterList>
    In this window, complete screen of report is displayed as an image instead of PDF.
    Please let me know if anybody faced similar issue earlier.
    It was working perfect earlier, but suddenly error started.
    regards
    Kedar Kulkarni

    No proper findings, but issue resolved.
    Problem i found that we got a domain change and service values were not refreshed until we apply new patch.
    So when we applied patch level 6 on BI WEBAPP& BI BASE S URL for ADS got refreshed and we faced the issue.
    After resetting the URL to new domain problem got resolved.
    Regards
    Kedar Kulkarni

  • Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments  Trying to download My Photos and movie 3 items so i can delete them all

    I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them?  Onece they get into my downloads i can do something with them as i understand.    That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac?    How much better is iLife11 then iPhoto08 and iMovie08 .  Thanks Greg

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Error while reading wsdl file

    I created and deployed a BPEL process with a JMS adapter and DB adapter.
    I have tested this and it works fine.
    After a few days, I try to open the project and the BPEL process, and click on the DB
    adapter and it throws an exception on the designer :
    "Error while reading wsdl file ... (wsdl file name) NULL Exception"
    This is hard to debug as the exception does not provide any info, NULL.
    This has happened several times for my project. The next time the JMS adapter hit the
    same exception while opening on designer. This one I notice happened after I imported
    a new schema file (xsd) into the BPEL process.
    Only way around that I have for this currently is to delete and recreate the adapters, which as time
    consuming as I have to re-create and re-assign a lot of the activities.
    Has anyone encountered this and is there a way to fix this without deleting/recreating the adapters ?
    Thanks.

    I experienced the same issue and found the cause and a workaround;
    "Error while reading wsdl file …. Exception: null"
    http://www.petervannes.nl/files/b7c08911ce3cde3677e2182bbc5f032a-47.php
    Edited by: 944333 on Jul 3, 2012 10:24 PM

  • Error while writing wsdl file

    Hi,
    i' m working on jdeveloper 10.1.3.1.0 and when i want to add a partner link to my BPEL project i get 'error while writing wsdl file' 'exception null' error then i couldn't create file.
    so how can i solve this problem?
    HELP:)

    Once the wrapper procedure is created by the adapter, the adapter does a second search to obtain the information about the wrapper (i.e. parameters, their data types, etc.). What's likely happening here is that the wrapper is getting created, but the adapter can't find it. The XSD is based on the wrapper, so if it can't be found, then no XSD can be generated. Try removing the existing wrapper package or choose that option in the wizard when it generates a new one.

Maybe you are looking for

  • Want to know the flow and fields urgent

    Hi ABAP Gurus,            i am developing Smart Form in that i want the details of purchase order no, purchase order date, vendor address information ,vendor pan no, payment terms and item code/description, quantity, rate, uom,amount(currency), tax c

  • Retaining case sensitive path names

    We are currently using initial capital letters for our directories in our path names. But every time I update my Fireworks file it automatically changes all directory names back to lower case, thus breaking our links on our web pages. Is there a way

  • How can I create a two columns zone in a Pages document without making all of the document two columns?

    I have a Pages document with 4 paragraphs. I want the first one to be separated in two columns, but just this one.

  • Sql Developer and Data Guard enabled instance

    I have version 1.1.2.25 SQL Developer and when I try to connect to Oracle 10gR2 instance which is data guard enabled and its logical standby it spits few message, and then connects, but data is not visible from any table. Is there any way to see data

  • Error while running multitenancy management tool

    I wanted to replicate the reports, universe and universe connection. But am getting the following error when i run the MTM. [ERROR] An error occurred while updating Web Intelligence document <reportname>. The detailed error message is while trying to