Event ID 36888 - Schannel - A fatal alert was generated and sent to the remote endpoint.
Exchange 2013: 2 x multi-role in one DAG - on-premise
Performing remote mailbox migration using internet (*non-exchange web-based tool*), to ship data from cloud Ex2010 server to Ex013 on-premise.
Have multiple failures when doing the mailbox data copy - my migration tool error code tells me that:
This error indicates that we were unable to authenticate to the source or destination mailbox and retrieve a list of folders when given 15
minutes to complete these operations. This may be because the source or destination is unusually slow, has a very large number of folders, or due to "hanging" networking calls.
Some mailboxes are copying, but around 80% are not. Checked all permissions and other factors.
I see in the System event log the following below:
Log Name: System
Source: Schannel
Date: 9/14/2013 2:14:53 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: server.domain.local
Description:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-09-14T20:14:53.699840000Z" />
<EventRecordID>135625</EventRecordID>
<Correlation />
<Execution ProcessID="544" ThreadID="17928" />
<Channel>System</Channel>
<Computer>server.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Anyone seen this? - not much recording this error available for Ex2013.
Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Hi Simon
I opened a SEV B case today. Appears to directly reflect the amount of load i put through, in terms of data being shipped with our migration tool. That tool is basically logging into each mailbox using a superuser account and populating
it with mail and calendar data form a source cloud mailbox. No fancy co-existence or online move requests.
All throttle policies are removed. Attempting to migrate more than 20 mailboxes at a time results in the System Event log being filled with the Schannel error above. Reducing the amount below this still shows the errors appearing, but not enough
to stop mailbox data being shipped and the migration tool suffering a stop error.
I will update the thread tomorrow when i speak with the engineer. Surprised noone has had any input so far.
I have the same problem, here is some data. I have two exchange profiles and the 2nd one stops logging in after this error starts. I have to reset the wireless connection and restart outlook to clear the situation.
Dave Ladouceur
Similar Messages
-
I keep losing my network connection for a few seconds at a time. Not a big deal unless I just spent time filling in a form and have to redo it.
Getting:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8. I just installed the new ARRIS
TG862 provided by Comcast.
Any Ideas?
Also get the following errors in my events:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
Realtek PCIe GBE Family Controller is disconnected from network.
Any help is appreciatedHi,
Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
How to use Skydrive
http://www.wikihow.com/Use-SkyDrive
Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
check device status in device manager, please also keep the all latest driver update of your PC.
And for error 36888, I found a similar thread, please refer to this link
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
Regards
Yolanda
TechNet Community Support -
The following fatal alert was generated: 20. The internal error state is 960.
Hi,
In Some servers including domain controller i am getting error in system event logs.
The following fatal alert was generated: 20. The internal error state is 960. ( In Domain controller)
The following fatal alert was generated: 40. The internal error state is 1205. (In same server CAS & HUB role is instaled).
An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed. (In
same server CAS & HUB role is instaled).
The following fatal alert was received: 46. (In same server CAS & HUB role is instaled).
I have read in many blogs some techie is telling to ignore the events. But i want to now exactly what is issue which is creating this alerts. Mostly in Domain controller i am getting this alerts. Kindly need your valuable suggestion and solution to overcome
the problem.
Thanks & Regards,Hello,
for the first 2 errors you find answers like
https://social.technet.microsoft.com/forums/windowsserver/en-US/091a3222-641b-43a3-ae19-6cc238828950/certificate-services-cant-connect-using-ssl
https://social.technet.microsoft.com/Forums/windowsserver/en-US/a87505a3-1fd0-47b3-b6db-d36444da34fc/schannel-errors-36874-and-36888?forum=winserversecurity
So assure that used certificates are not broken.
Also it would be great to post the complete error messages and list all installed server roles and applications from that machines with the errors for a better overview.
Are all machines installed with the latest available SPs and updates?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
On my app server which is win2008R2, no IIS installed, I kept getting these errors:
"The following fatal alert was generated: 40. The internal error state is 1205." - Event ID 36888
"An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed." - Event ID 36874
I did a few search on google but they mentioned about the SSL. However, my server has no SSL installed. We don't have a need to put SSL on the app server. Any help will very appreciated.
-veconSimply ignore the message then.
If you would like to investigate further, you will need to identify the source of the TLS connection. If this is not logged in event viewer then you could give a look to IIS logs or simply use a Network Sniffer like Wireshark to inspect the traffic.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
I got an unused Adobe After effects CS6 from an ebay seller.He said the disc was cracked and sent me the 24 digit number key.Do I still need the disc to get the program?And where do i input the 24 digit key?Also do I have to sign up for CC I can't afford that monthly charge.
You can download from the page linked below:
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
i was stollen and i used the "Remote Wipe" but i didn't know that it won't be able to locate it anymore. It still hasn't wiped it, as it has not been online yet. Is there any possible way to undo this?
First of all i had already blocked it by icloud programm and then after that i received an email of confirmation that it was already blocked. Then i entered in the iCloud programm and saw that the thief it was disconected to not be localized. Do you know that even i had used the Remote Wipe it will work? Because the thief had before the blocked of the phone disconect to not be localized.
-
I have searched on TechNet as well as googled it. I have not found too much information as to what specifically is the issue here. I do know that Alert 51 has to do with TLS. I have adjusted the registry to enable logging for TLS 1.0 (client and server),
but do not know exactly the version Lync 2010 uses.
I have also removed an old certificate. This did eliminate an earlier Schannel error message. Yet, this particular one, 51 internal error state 1306, kept coming back.
Although I can disable the logging, I prefer to know what specifically is going on and what is generating this error message. Does anyone have any ideas?
TIA
Bluewe need the Operating System details and Lync client details
And the complete text for Event ID 36888 along with it XML details
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph -
The following fatal alert was generated: 10. The internal error state is 1203.
I get this ERROR i event view, om server win 2008 R2 with IIS 7.5 when there is no https sajt but clients search the with this protocole. I dont want to unactivate event view with this type of error, because the IIS craches anyway after 25 times try by client
under 6 minutes. How should I solve this problem?
RegardsYou should post to the below forum.
http://forums.iis.net/ -
Exchange 2013 event ID 36888 SChannel error 12 and 1203
I am running Windows Server 2012 STD with Exchange 2013 installed on the same server. I know that Microsoft doesnt recommend to do this, but I had no choice. Errors are follow:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 12.
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
- System
- Provider
[ Name] Schannel
[ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
EventID 36888
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-11-25T23:30:34.120233400Z
EventRecordID 121125
Correlation
- Execution
[ ProcessID] 1064
[ ThreadID] 20184
Channel System
Computer server
- Security
[ UserID] S-1-5-18
- EventData
AlertDesc 10
ErrorState 12
System
- Provider
[ Name] Schannel
[ Guid] {1F678132-5938-4686-9FDC-C8FF68F15C85}
EventID 36888
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-11-26T05:45:22.650086300Z
EventRecordID 121230
Correlation
- Execution
[ ProcessID] 1064
[ ThreadID] 45336
Channel System
Computer SERVER
- Security
[ UserID] S-1-5-18
- EventData
AlertDesc 10
ErrorState 1203
Process ID 1064 is Isass.exe
I found somewhere that error 1203 could be ignored, but nothing about error 12.
Server is running with selfsigned SAN certificate, hosted 2 exchange domains (10 mailboxes, 5 local, 5 linked for remote domain connected via external 2 way non transitive domain trust).
Thank you very much for any advise.
Regards,
Jan
ŠerýHi Jan,
Based on my research for the Event 36888, the issue may be caused by not standard or corrupted behavior of web browsers or users, such as user use HTTP protocol to access Exchange service which is a SSL site on port 443.
Please check whether there is a HTTP redirect configured in your IIS Manager of Exchange server. Also reset web browsers to have a try. Here are some similar thread for this issue:
https://social.technet.microsoft.com/Forums/forefront/en-US/92c63737-c2a3-41f7-8878-3b0cf5ee95ff/new-install-event-log-schannel-event-id-36888?forum=Forefrontedgegeneral
http://ficility.net/2013/10/21/exchange-2013-exchange-2010-windows-server-2012-schannel-event-id36888-1203-tlsssl-error-the-root-cause/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support -
ID: 36887; source: Schannel "fatal alert was recieved; 49"
at my eventlog i get only one error - the following error one:
"the following fatal alert was recieved; 49"
Log Name : System
Source: Schannel
Event ID: 36887
Level: Error
User: System
The notification comes irregularly over again
I did a some intensive research but I can't find hints for alert 49.
Anybody has a hint to solve the problem ?
_________________________________________________ assist others - and you can hope of help at selfHi,
Thanks for posting in Microsoft TechNet forums.
I would appreciate if you can help clarify the following questions:
When did this issue begin to occur?
Have you experience any low performance since came across this event error?
Is this a client inside a domain?
Please refer to this thread,
it seems this issue have something to do with security software or exchange server related client.
At this point, I suggest we prepare
clean boot to test.
Best Regards
Magon Liu
TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
MBAM Error Event ID 2 The Remote Endpoint Was Unreachable ErrorCode 0x803d0010
Cannot get a machine to talk to the mbam server.
Machine is encrypted but not reporting to Mbam Server.
Error log:
TimeCreated
[SystemTime]
2014-12-12T07:43:37.411949200Z
EventRecordID
297
Correlation
Execution
[ ProcessID]
168
[ ThreadID]
2444
Channel
Microsoft-Windows-MBAM/Admin
Computer
ABGGBLD02025.bsg.LOCAL
Security
[ UserID]
S-1-5-18
EventData
VolumeId
\\?\Volume{763467f2-2e1e-11e4-ba03-1458d0b73bcb}\
ErrorCode
0x803d0010
ErrorString
The remote endpoint was not reachable.
Machine Details:
OS Name Microsoft Windows 7 Enterprise
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ABGGBLD02025
System Manufacturer Hewlett-Packard
System Model HP EliteBook Folio 9470m
System Type X86-based PC
Processor Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz, 2301 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date Hewlett-Packard 68IBD Ver. F.48, 13/01/2014
SMBIOS Version 2.7
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name BSG\CRackham
Time Zone GMT Standard Time
Installed Physical Memory (RAM) Not Available
Total Physical Memory 2.88 GB
Available Physical Memory 1.43 GB
Total Virtual Memory 5.77 GB
Available Virtual Memory 4.36 GB
Page File Space 2.88 GB
Page File C:\pagefile.sys
Troubleshooting Steps:
1: Removed out of OU and back in again to re-apply GPO
2: BIOS already latest version
Any help or information greatly appreciatedwhat it is not able to talk to? Hardware and recovery or status recovery endpoint? is this the only machine giving problem or there are other machines as well giving you trouble?
are you able to browse the URL from this bad machine? Do this- go to HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement
there will be two URLs one to escrow the recovery password and other for client reporting. make sure you are able to browse through the URL from IE, you should something see like "meta data publishing is disabled".
if it works then you will need to check the logs from helpdesk website,
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support. -
Alright, I am stumped. I have looked at nearly every article on this error here at Technet and other sites:
An error occurred while sending encryption status data.
Error code:
0x803d0013
Details:
A message containing a fault was received from the remote endpoint.
First, I am testing this. I have copied the MDOP ADMX/ADML files directly to the client I am testing this on, and I am applying the policy via the Group Policy Management on the local machine. I am not deploying this via the domain. I wouldn't think that
would make a difference, but please let me know if I am wrong.
I have performed the following:
1. (DisableMachineVerification)
in MBAM registry as
is in this article http://support.microsoft.com/kb/2612822
2. On the MDOP group policy I have enabled:
I. Client Management
A. Configure MBAM Services
B. Configure user exemption policy
II. Fixed Drive
A. Fixed data drive encryption settings
B. Choose how BitLocker-protected fixed drives can be recovered
III. Operating System Drive
A. Operating system drive encryption settings
B. Choose how BitLocker-protected operating system drives can be recovered
IV. Removable Drive
A. Control use of BitLocker on removable drives
3.
On the MBAM Administration Server AD object, enable the “Trust for delegation for any service (Kerberos Only) option”, under the Delegation tab. Also,
the user has been granted delegation privileges for all of the services on the server.
4. SPN Records have been created for the server
5. HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement
Change the ClientWakeUpFrequency = 1 and StatusReportingFrequency=1
Create a dword value “NoStartupDelay” under HKLM\Software\Microsoft\MBAM and set its value to 1.
Also, I did not encrypt my drive with MBAM. It was encrypted before hand. Is there anything I can check or do? The event logs on the MBAM server under MBAM-Web don't show anything under Admin or Operational.
I think my KeyRecoveryServiceEndPoint and StatusReportingServiceEndpoint URLs are correct:
https://mbam01.domainname.com:443/MBAMRecoveryAndHardwareService/CoreService.svc
https://mbam01.domainname.com:443/MBAMComplianceStatusService/StatusReportingService.svc
I even think there was a registry key to make the hardware compatible, but I don't remember which key it was, as I uninstalled and reinstalled, and don't remember where I found that on the forums.
Any suggestions?If you have made changes to the web.config files to accommodate the SSL settings, you will not be able to browse the URLs with the http protocols. The URLs will then only work with the https protocols.
Could you please confirm the login created for the particular local groups with the following permission:-
For MBAM Compliance Auditing DB Access:-
User Mapping – MBAM Compliance Status
DB Role Membership – ComplianceWriteRole
Server Roles – Public
For MBAM
Recovery and Hardware DB access:-
User Mapping – MBAM Recovery and Hardware
DB Role Membership – RecoveryandHardwareReadRole, RecoveryandHardwareWriteRole
Server Roles – Public
Make sure the MBAM Computer account (MBAM Web Server) is a member of these two groups.
Gaurav Ranjan -
my ipod touch was stolen and i need the serial number but i dont have the paper work or the box, so how do i get the serial number?
If you registered it, Apple can help you. Give them a call.
Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with your bank or any savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries. -
Hi there fellow colleagues,
I am currently facing a problem with ADCS Policy Web Service on Windows Server 2008 R2 Enterprise (SP1).
• Hotfix installed
http://support.microsoft.com/default.aspx?scid=kb;EN-US;2545850
• Application Pool Identity: ApplicationPoolIdentity (also tested custom service account)
• Testing from local machine and another machine
• CA and CEP on same system
• I am getting a Kerberos ticket for the service and I can see a successful logon event for the my user.
• Kerberos authentication is working - directly calling the URL I get a 403.14 (Directory Listing Denied) with Logon Method Negotiate
The following message is shown in the Certificate Services Client - Certificate Enrollment Policy Server
The remote endpoint could not process the request. 0x803d000f (-2143485937)
The following WS-Errors are in the WebServices analytic log
•WsCall API failed by 0x803D0005
•Error occurred: 0x0 - There was an error communicating with the endpoint at 'https://cep.example.com/ADPolicyProvider_CEP_Kerberos/service.svc/CEP'.
•Error occurred: 0x0 - The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
•Error occurred: 0x0 - The requested resource requires user authentication.
•Error occurred: 0x803D0005 - Access was denied by the remote endpoint.
In the application log I can see an event ID 3, source System.ServiceModel 3.0.0.0, Level Error
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/45653674
Exception: System.ServiceModel.ServiceActivationException: The service '/ADPolicyProvider_CEP_Kerberos/service.svc' cannot be activated due to an exception during compilation. The exception message is: Software\Microsoft\CEP. ---> System.Configuration.ConfigurationErrorsException:
Software\Microsoft\CEP
at Microsoft.CertificateServices.Policy.DerivedHost.Initialize()
at Microsoft.CertificateServices.Policy.DerivedHost.OnOpening()
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath)
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
--- End of inner exception stack trace ---
at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)
Process Name: w3wp
Process ID: 3108
The EnrollmentPolicyWebService log on the other hand tries to tell me:
The Certificate Enrollment Policy Web Service failed to initialize. Confirm that the Certificate Enrollment Policy Web Service is properly installed. Try to restart Internet Information Services (IIS) by using iisreset.exe. If the problem persists, enable
tracing in the web.config file, restart IIS, attempt to obtain policy information from any client, and then contact Microsoft Customer Service and Support with the trace file information. Unknown HResult Error code: 0x80131902
I am kind of lost and I'd appreciate some help...
Thanks,
MMFCalling the CES URL, the following pops up:
Process information:
Process ID: 3636
Process name: w3wp.exe
Account name: IIS APPPOOL\WSEnrollmentServer
Exception information:
Exception type: FileNotFoundException
Exception message: Could not load file or assembly 'Microsoft.CertificateServices.Certcli.Interop, Version=6.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
But - the assembly is installed in the GAC (%windir%\assembly) with the right culture, version, etc. -
IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?
Maybe you are looking for
-
I have a profile copied from my old Macbook with a Gdrive (apparently through migration assistant). I can't seem to get the two profiles to open in the same window so I can copy and paste from the older profile to the new one. Thanks.
-
Can't open my project files since i updated
Hey guys, I wanted to change some content of a website i made last year. Now i can't open the project files anymore. Error Message: "The File cannot be opened" "Die File is already opened in another Version of MUSE" ( translated from German) This hap
-
Photo folders not showing on ATV
Hi, Just set up my new ATV yesterday, and overall I really like it. However, I do have one problem with photo syncing. I set up iTunes to sync all the contents of a folder on my iMac called "Photos". All 2,500 photos appear to have synced to the ATV.
-
Can't add and play MID(I) music files?
Hello. I just noticed I cannot manually add MID(I) music files (not scan for media method) into my iTunes v11.3 installation in my updated, Windows XP Pro. SP3 or is it just me? Thank you in advance.
-
Loading iTunes purchased music onto iPod
Hello, I just recieved a brand new 5th generation 30GB iPod, and tried to sync it with my computer today. Most of my audio files loaded just fine, but none of the music I purchased on iTunes will load. In addition, any time I try to play some of the