Event ID 36888. The following fatal alert was generated: 51. The internal error state is 1306.
I have searched on TechNet as well as googled it. I have not found too much information as to what specifically is the issue here. I do know that Alert 51 has to do with TLS. I have adjusted the registry to enable logging for TLS 1.0 (client and server),
but do not know exactly the version Lync 2010 uses.
I have also removed an old certificate. This did eliminate an earlier Schannel error message. Yet, this particular one, 51 internal error state 1306, kept coming back.
Although I can disable the logging, I prefer to know what specifically is going on and what is generating this error message. Does anyone have any ideas?
TIA
Blue
we need the Operating System details and Lync client details
And the complete text for Event ID 36888 along with it XML details
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph
Similar Messages
-
On my app server which is win2008R2, no IIS installed, I kept getting these errors:
"The following fatal alert was generated: 40. The internal error state is 1205." - Event ID 36888
"An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed." - Event ID 36874
I did a few search on google but they mentioned about the SSL. However, my server has no SSL installed. We don't have a need to put SSL on the app server. Any help will very appreciated.
-veconSimply ignore the message then.
If you would like to investigate further, you will need to identify the source of the TLS connection. If this is not logged in event viewer then you could give a look to IIS logs or simply use a Network Sniffer like Wireshark to inspect the traffic.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
The following fatal alert was generated: 20. The internal error state is 960.
Hi,
In Some servers including domain controller i am getting error in system event logs.
The following fatal alert was generated: 20. The internal error state is 960. ( In Domain controller)
The following fatal alert was generated: 40. The internal error state is 1205. (In same server CAS & HUB role is instaled).
An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed. (In
same server CAS & HUB role is instaled).
The following fatal alert was received: 46. (In same server CAS & HUB role is instaled).
I have read in many blogs some techie is telling to ignore the events. But i want to now exactly what is issue which is creating this alerts. Mostly in Domain controller i am getting this alerts. Kindly need your valuable suggestion and solution to overcome
the problem.
Thanks & Regards,Hello,
for the first 2 errors you find answers like
https://social.technet.microsoft.com/forums/windowsserver/en-US/091a3222-641b-43a3-ae19-6cc238828950/certificate-services-cant-connect-using-ssl
https://social.technet.microsoft.com/Forums/windowsserver/en-US/a87505a3-1fd0-47b3-b6db-d36444da34fc/schannel-errors-36874-and-36888?forum=winserversecurity
So assure that used certificates are not broken.
Also it would be great to post the complete error messages and list all installed server roles and applications from that machines with the errors for a better overview.
Are all machines installed with the latest available SPs and updates?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Event ID 36888 - Schannel - A fatal alert was generated and sent to the remote endpoint.
Exchange 2013: 2 x multi-role in one DAG - on-premise
Performing remote mailbox migration using internet (*non-exchange web-based tool*), to ship data from cloud Ex2010 server to Ex013 on-premise.
Have multiple failures when doing the mailbox data copy - my migration tool error code tells me that:
This error indicates that we were unable to authenticate to the source or destination mailbox and retrieve a list of folders when given 15
minutes to complete these operations. This may be because the source or destination is unusually slow, has a very large number of folders, or due to "hanging" networking calls.
Some mailboxes are copying, but around 80% are not. Checked all permissions and other factors.
I see in the System event log the following below:
Log Name: System
Source: Schannel
Date: 9/14/2013 2:14:53 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: server.domain.local
Description:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-09-14T20:14:53.699840000Z" />
<EventRecordID>135625</EventRecordID>
<Correlation />
<Execution ProcessID="544" ThreadID="17928" />
<Channel>System</Channel>
<Computer>server.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Anyone seen this? - not much recording this error available for Ex2013.Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support
Hi Simon
I opened a SEV B case today. Appears to directly reflect the amount of load i put through, in terms of data being shipped with our migration tool. That tool is basically logging into each mailbox using a superuser account and populating
it with mail and calendar data form a source cloud mailbox. No fancy co-existence or online move requests.
All throttle policies are removed. Attempting to migrate more than 20 mailboxes at a time results in the System Event log being filled with the Schannel error above. Reducing the amount below this still shows the errors appearing, but not enough
to stop mailbox data being shipped and the migration tool suffering a stop error.
I will update the thread tomorrow when i speak with the engineer. Surprised noone has had any input so far.
I have the same problem, here is some data. I have two exchange profiles and the 2nd one stops logging in after this error starts. I have to reset the wireless connection and restart outlook to clear the situation.
Dave Ladouceur -
The following fatal alert was generated: 10. The internal error state is 1203.
I get this ERROR i event view, om server win 2008 R2 with IIS 7.5 when there is no https sajt but clients search the with this protocole. I dont want to unactivate event view with this type of error, because the IIS craches anyway after 25 times try by client
under 6 minutes. How should I solve this problem?
RegardsYou should post to the below forum.
http://forums.iis.net/ -
I keep losing my network connection for a few seconds at a time. Not a big deal unless I just spent time filling in a form and have to redo it.
Getting:
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows SChannel error state is 252. Using windows 8. I just installed the new ARRIS
TG862 provided by Comcast.
Any Ideas?
Also get the following errors in my events:
The name "WORKGROUP :1d" could not be registered on the interface with IP address 10.0.0.2. The computer with the IP address 10.0.0.3 did not allow the name to be claimed by this computer.
Realtek PCIe GBE Family Controller is disconnected from network.
Any help is appreciatedHi,
Critical Kernel-power event ID 41 is used appear after PC restarts or randomly restarts with error
BugcheckCode listed or a cold reboot. Do you get BSOD and some dump files?
Default location is %SystemRoot%\Minidump. You can upload it to skydrive, then paste link here.
How to use Skydrive
http://www.wikihow.com/Use-SkyDrive
Kernel-PnP event ID 219: A Plug and Play device driver on your system is failing to load due to a device driver or device malfunction, you can unplug any external devices (except mouse and keyboard, but please keep the latest drivers), and
check device status in device manager, please also keep the all latest driver update of your PC.
And for error 36888, I found a similar thread, please refer to this link
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4c5430f5-43f6-41b4-97d3-03cfb3efa70b/schannel-error-event-id-36888-is-there-a-way-to-identify-what-causes-schannel-to-log-error?forum=winserverDS
Regards
Yolanda
TechNet Community Support -
ID: 36887; source: Schannel "fatal alert was recieved; 49"
at my eventlog i get only one error - the following error one:
"the following fatal alert was recieved; 49"
Log Name : System
Source: Schannel
Event ID: 36887
Level: Error
User: System
The notification comes irregularly over again
I did a some intensive research but I can't find hints for alert 49.
Anybody has a hint to solve the problem ?
_________________________________________________ assist others - and you can hope of help at selfHi,
Thanks for posting in Microsoft TechNet forums.
I would appreciate if you can help clarify the following questions:
When did this issue begin to occur?
Have you experience any low performance since came across this event error?
Is this a client inside a domain?
Please refer to this thread,
it seems this issue have something to do with security software or exchange server related client.
At this point, I suggest we prepare
clean boot to test.
Best Regards
Magon Liu
TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Question: Need help with overcoming the following message: "Nothing was imported.
Need help with overcoming the following message: “Nothing was imported. The file(s) or folder(s) selection to import did not contain any supported file types, or the files are already in this catalogue”.
The photos being scanned are old film shots. They have NOT been previously scanned. I am using Photoshop Elements 9 software.
QUESTION: how do I override this STOP and or circumvent the photo comparison option????
Thanks for the help. Bob K --- [email protected]Are you scanning as jpeg, tiff or some other format?
Are you using continuous numbering for files names as by definition scanned files have no exif data.
-
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
Hi, i'm trying to download the Lightroom 6 stand alone version and get the following message right after a click the checkout box: "The account was registered for a different country. Please sign out and sign in using an existing account for this country." I'm in Namibia and tried to change my country from Africa to USA but still the same problem. TIA
Hi Annen,
Please refer the following forum thread.
Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"
Regards,
Sumit Singh -
When installing iMS 5.1 I get the following fatal JRE error near the end of the installation:
The application command "jre -cp "/opt/iplanet/ims5/bin/msg/imta/classes/imtaconfig.jar" com.iplanet.msg.imta.config.InitConfig -d thc-tsg.com -r thc-tsg.com -h development.thc-tsg.com -c /opt/iplanet/ims5/msg-development/imta/config" could not be run.
OS - Solaris 8
iDS 4.13The IMS installer currently hardcodes the path to a JRE that it wants to run. This JRE is the one that is included in the kit, so you <i>must</i> install the JRE that comes with it.
The only way around this is to use the embedded JRE during installation and not to set the JAVA_HOME environment variable. Check if you have it defined by issuing the command 'echo $JAVA_HOME'. -
Can anyone help me with syncing my devices?
I'm on a PC that I had to recover, but forgot to save my iTunes data for post recovery.
Now I get the following message, "iTunes was unable to load data class information from Sync Services..."
Thanks!Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Cheers, Tom -
I get the following message when sending emails on my ipad: The recipient "email address" was rejected by the server". If I send the email to 3 people, one will be rejected. If I send the same thing to the same 3 people a different one will be rejected. Any ideas?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.
I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows -
Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name: System
Source: Schannel
Date: 10/04/2015 9:21:17 AM
Event ID: 36871
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
ThanksHi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Cannot delete file off desktop
I have, excel files on my desktop (labled with numbers and letters) that cannot be moved, deleted or even opened. I have no idea what they are. How do I get rid of them??
-
after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freez
-
My phone is still disabled and every time I try to connect it to ITunes nothing happens
-
How do I resize an image to 600x and 4.1 ratio
For the last hour I have been trying to resize a jpg to post on Twitter with no success. Can somebody help me?
-
Shares not working after reprovision of users
I just repovisioned my users from iFolder 3.6 running on SLES 10 OES2 to iFolder 3.9 on SLES 11Sp1 OES 11. The users folders sync, however any folders shared to them do not. The client gives the server available error. If I log in via the web client