Event ID:4375 Windows Servicing failed to complete process of setting package KB948465

I am using windows server 2008 sp1. I am getting this message in event logs. some package is present in the installed update list and some packages are not listed in install update list on program feature.what to do install dotnetframework3.Remove all
installed updates then install framework?. further i am also tried to install windows server 2008 sp2 but that also can't install.

Hi FranEnriquez,
From the event, Logon Type: 2, Logon title: Interactive. For more details of this Event, please refer to the
following article.
4625: An
account failed to log on
Logon Type
Codes Revealed
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, I noticed that “Account Name: USADIWPRODCLU2$, Account Domain: r0013.collaboration.ecs.hp.com”
in this event. Please check this account in that described domain if you can find some relevant clues.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Client for NFS fails to restart - Event ID: 16387 - Windows(R) failed a request to initialize the Network File System (NFS) redirector

I have seen this issue out there in a few threads but a definitive solution has not been posted by Microsoft that I can find. So here is the simple answer. The long answer why this doesn't work on a default install of MSNFS is going to have to come from
Microsoft and should be in the form of a hotfix.
Problem Description
On boot, Client for NFS starts and remains running. If an attempt is made to restart the service from the MMC or nfsadmin, an error occurs and nfsclnt fails to start.
Event log error:
==================================================================
Log Name:      Application
Source:        NfsClnt
Date:          7/7/2011 2:39:51 PM
Event ID:      16387
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      myserver
Description:
Windows(R) failed a request to initialize the Network File System (NFS) redirector
<[d:\w7rtm\base\fs\remotefs\nfs\client\nfsclient\service.c:199] : 0: The operation completed successfully.
>.
Client for NFS cannot start.
Windows may be low on system resources. Try increasing available system resources by closing programs, then start Client for NFS manually.
==================================================================
PROBLEM CAUSED BY: When shutting down Client for NFS using the Services GUI, Client for NFS Redirector is not shut down
SOLUTION: Stop NFS Redirector - 'sc stop NfsRdr' - Then start NFS client service - 'nfsadmin start client'
Use 'nfsadmin client stop' to correctly shut down both the Client for NFS service and the Client for NFS Redirector.
'Network File System (NFS) redirector' is actually "Client for NFS Redirector" and not listed as a service even though "Client for NFS" requires it.
Using 'sc', details on the hidden NfsRdr system component can be queried and then used to stop the redirector so that nfsclnt.exe can reload it on start up using the Services GUI.
C:\Windows\System32>sc GetDisplayName NfsRdr
[SC] GetServiceDisplayName SUCCESS
Name = Client for NFS Redirector
C:\Windows\System32>sc qdescription NfsRdr
[SC] QueryServiceConfig2 SUCCESS
SERVICE_NAME: NfsRdr
DESCRIPTION: Kernel-side part of Client for NFS. Enables a Windows based computer to access NFS server shares
Hope this thread is helpful !!

Thank you for your sharing and this will certainly help others have similar issues in future.TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Windows Service failing to start

Hello Everyone,
I'm trying to run CQ 5.6.1 as a service on Windows Server 2008 R2 SP1 64-bit.
I've replaced prunsrv in instsrv.bat with prunsrv_amd64.
Installing the service seems fine, as does uninstalling.
This is the kind of entry I see in my c:\CQ\5.6.1\publish\crx-quickstart\logs\commons-daemon.2013-07-11.log file after I try start the service:
[2013-07-11 15:45:10] [info] Commons Daemon procrun (1.0.8.0 64-bit) started
[2013-07-11 15:45:10] [info] Running 'cq5' Service...
[2013-07-11 15:45:10] [info] Starting service...
[2013-07-11 15:45:10] [error] Failed creating java
[2013-07-11 15:45:10] [error] Cannot create a file when that file already exists.
[2013-07-11 15:45:10] [error] ServiceStart returned 1
[2013-07-11 15:45:10] [error] Cannot create a file when that file already exists.
[2013-07-11 15:45:10] [info] Run service finished.
[2013-07-11 15:45:10] [info] Commons Daemon procrun finished
The corresponding entry in the Event Log shows the following:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-11T19:45:10.423634500Z" />
    <EventRecordID>7164</EventRecordID>
    <Correlation />
    <Execution ProcessID="516" ThreadID="1356" />
    <Channel>System</Channel>
    <Computer>cqpub-02</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">cq5</Data>
    <Data Name="param2">%%0</Data>
</EventData>
</Event>
This same behavior is exhibited across three separate servers each with their own installation of CQ (one as an author and two as publish).
Any ideas what could be going wrong or where I can find more detailed information about where and what is trying to create a "java" file? Is the start-service.bat used at all?
Thanks!
Garth

Hi Marc,
Thanks for your reply!
JAVA_HOME is set. It echoes out c:\Program Files\jdk1.7.0_25\jre.
I installed the service as described by the documentation for the process.
I've also applied the jvm_mx correction to jvm_options (as outlined by the documentation link above).
No errors are reported during the installation, but evidently it's being installed misconfigured. Adjusting instsrv.bat to only echo out the commands it runs gives back the following:
C:\CQ\5.6.1\publish\crx-quickstart\opt\helpers>instsrv.bat cq5
Installing service cq5
    runs in   C:\CQ\5.6.1\publish\crx-quickstart
    uses      C:\CQ\5.6.1\publish\crx-quickstart\opt\helpers\\..\..\app\cq-quickstart-5.6.1-standalone. jar
    starts    org.apache.sling.launchpad.app.Main
    redirects output to: C:\CQ\5.6.1\publish\crx-quickstart\logs\startup.log
chdir /D C:\CQ\5.6.1\publish\crx-quickstart\opt\helpers\
prunsrv_amd64 //IS//cq5 --Description="Adobe CQ5" --DisplayName="cq5" --Startup=
""auto"" --StartPath=C:\CQ\5.6.1\publish\crx-quickstart --Classpath=C:\CQ\5.6.1\publish\crx-quickstart\opt\helpers\\..\..\app\cq-quickstart-5.6.1 -standalone.jar --JvmMx=1792m --JvmOptions=-XX:MaxPermSize=256M;-Xmx1792m#-Dsling.run.modes="publish" --StdOutput=C:\CQ\5.6.1\publish\crx-quickstart\logs\startup.log --StdError=C:\CQ\5.6.1\publish\crx-quickstart\logs\startup.log --LogPath=C:\CQ\5.6.1\publish\crx-quickstart\logs --PidFile=..\conf\cq.pid --StartMode jvm --StartClass=org.apache.sling.launchpad.app.Main --StartParams=start#-c#.#-i#launchpad#-p#4503#
-j#63000 --StopMode=jvm --StopClass=org.apache.sling.launchpad.app.Main --StopParams=stop --Jvm="auto"
Do you think anything still looks wrong in there?
Garth

Weblogic Windows service fails when aspectwerkz is added to configuration

All,
I have been running weblogic as windows service successfully. Now, we are utilizing AOP from aspectwerkz. I added the necessary settings for aspectwerkz in the install script. After adding the changes, I am able to install the service. However, when I start the service it fails with the MMC error dialog box displaying:
'Error 1067: The process terminated unexpectedly.'
I opened the Event viewer and checked the System events. I see an error which says:
'The beasvc med1d2_med1d2as01 service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 0 milliseconds: No action.'
Unfortunately, the info I get from MMC and event viewer doesn't really help in any way. I tried tweaking 'CMDLINE' and other stuff in the install script to no avail. I would appreciate any help.
Infrastructure information:
OS: Windows Server 2000
App server: Weblogic 8.1 sp4
JDK: Sun JDK 1.4.2 04
Thanks in advance.
Message was edited by:
FastBucks

Hi, raynorman, and welcome to the Community!
I have referred your enquiry to the vendor for more information.
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Calling SSIS package from C# Windows Service Fails

Hi All.
I've got an SSIS package that reads from an Excel file and populates a database. The Excel file location gets passed in to the package as a variable. Also the Protection Level of the package is set to EncryptSensitiveWithPassword.
This all works fine when I run the package from Visual Studio or using DTEXEC. When I try to run it from a C# Windows Service though I get the following exception:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Office Access Database Engine" Hresult: 0x80004005 Description: "The Microsoft Office Access database engine cannot open or write to the file ''. It is already opened exclusively
by another user, or you need permission to view and write its data.".
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Input Excel Connection" failed with error code 0xC0202009. There may be error messages posted before this
with more information on why the AcquireConnection method call failed.
Dedupe Worksheet failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
The windows service runs with LocalSystem account and the following code is used to call the SSIS Package:
                Application app = new Application();
                Package package = null;
                app.PackagePassword = "*******";
                //Load the SSIS Package which will be executed
                package = app.LoadPackage(@"C:\Projects\DataDedupeMatch\DataDedupeMatch\DataDedupe.dtsx", null);
                //Pass the varibles into SSIS Package
                package.Variables["User::FilePath"].Value = e.FullPath.Replace(@"\\", @"\");
                Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = package.Execute();
I would really appreciate if someone could help me out with this.
Thanks in advance,
Deon

Instead of hosting the SSIS runtime in your service, you should use a separate host process for your SSIS package. You're using the Office drivers, which aren't designed or supported for running in long-lived unattended processes like a Windows Service.
You can use your own SSIS hosting code, or just use dtexec.exe to host your package. In either case you would start the child process with
Process.Start.
David
David http://blogs.msdn.com/b/dbrowne/

Created windows service fails to start

Hi all. We have a piece of software that must always be running on a Windows Server 2008 box.
Currently due to poor development, this software is only run by a local user (not as SYSTEM nor initiated via a Windows Service) so when our user gets logged off, the software goes down with it.
I have to find a way to get a particular command to run (as administrator) when the machine turns on (even if a user a user does not log in). I have been playing with the SC command to create a service but I cannot get the service to start. I keep receiving
the error:
FAILED 1053: The service did not respond to the start or control request in a timely fashion.
Another option I was trying as a temporary fix was to use the PsTools to launch the software. When the processes are running they are running as SYSTEM, but they still shut down when the user is logged off. Is there an easier way to get services to work?
Or another way entirely to get software to launch on System boot? Please note that I am very restricted in this environment so doing this without the use of 3rd party tools is preferable. Thank you!!

If you're the dev, then these might help:
http://msdn.microsoft.com/en-us/library/zt39148a%28v=vs.110%29.aspx and
http://www.codeproject.com/Articles/106742/Creating-a-simple-Windows-Service
This might help you also:
http://www.timdavis.com.au/general/creating-a-user-defined-service-in-windows-7/

Deploying Windows Service Fails Every Other Time

I'm using Release Management 2013 to deploy a Windows service. I go through the steps listed below to deploy it. It fails on the first step (Delete Service) every other time. When I run it again, it works. It seems like it's saying
it failed, but is somehow actually succeeding. After it fails, I don't see the service in the Services list anymore. Then when I run the deployment again, it succeeds.
I have found that if I manually stop the service before deploying again, it will always succeed. There doesn't seem to be a good way of doing that in Release Management though, since the Stop Service action will error out if the service doesn't exist.
Any help would be appreciated!
==============
Delete Service
Create Folder
XCopy Site Deployment (deploys from drop folder)
Copy Config Files from Drop folder (copies config files folder from drop folder)
Delete File(s) or Folder (deletes existing config)
Rename File or Folder (renames appropriate copied config to the name of the previously deleted config file)
Delete File(s) or Folder (deletes other config files)
Delete File(s) or Folder (deletes config folder)
Create Service
Start Service

Hi,
You may have solved this by now, but for the record, I had the exact same issue. The problem is in this section of ManageWindowsServices.ps1
elseif ($Action -eq "delete")
#If the service exists, we first stop it to avoid "Marked for deletion" problems
$service = Get-Service -Name $ServiceName -ErrorAction SilentlyContinue
if ($service -ne $null)
#Stop the service
$status = & "sc.exe" "$ServerName" stop "$ServiceName"
"Stop status : $status"
$status = & "sc.exe" "$ServerName" $Action "$ServiceName"
"Delete status : $status"
#Ensure the service was deleted successfully
$service = Get-Service -Name $ServiceName -ErrorAction SilentlyContinue
if ($service -ne $null)
$(throw "The deletion of the service failed.")
else
$exitCode = 0
and is due to the fact that the second Get-Service call does actually return the service, even though it's after the call to delete it. Presumably this is some kind of race condition, where the call to delete the service returns before it's finished all
it's work.
In any case, the solution I went for was to rewrite this section as:
elseif ($Action -eq "delete")
[int]$returnCode = 0
#If the service exists, we first stop it to avoid "Marked for deletion" problems
$service = Get-WmiObject -Class Win32_Service -Filter "Name='$ServiceName'"
if ($service -ne $null)
#Stop the service
$status = & "sc.exe" "$ServerName" stop "$ServiceName"
"Stop status : $status"
"Deleting Service..."
$returnCode = $service.delete().ReturnValue
"Return code was : $returnCode"
if ($returnCode -ne 0)
$(throw "The deletion of the service failed: Return code was $returnCode")
#Ensure the service was deleted successfully
$service = Get-WmiObject -Class Win32_Service -Filter "Name='$ServiceName'"
if ($service -ne $null)
$(throw "The deletion of the service failed.")
else
$exitCode = 0
The above code works in all cases that I've run it for. You can either edit the existing ManageWindowsServices script, or simply create a new one. I opted for the latter.
Note: This is my first attempt at using Powershell, so there may well be a better way of doing the above.

MDM Server Window Service failed after adding server password

After adding MDM server password, MDM server window service can't start up. We have to use clix command to start the server. Is there anyway to fix window service problem?

Hi Jean,
From the version number it sounds like you're using version 5.5 SP4, right? The Console application was significantly changed in SP5 and you would no longer see the locked server icon... If you unmount the server from the Console, and re-mount it, isn't there an option on the context menu for the tree (right-click on the server node) to provide the password? Did you try "Connect to Server" or "Start Server" on this context menu?
Thanks... I don't know if I can help you with your problem, but I will try!
-Cleopatra
Message was edited by: Author - found the option on the context menu to provide the password to the server
Cleopatra Von Ludwig
Message was edited by:
Cleopatra Von Ludwig

Windows Backup fails to complete and System shows 29 Restore Points all titled "System Image restore point" but none will work.

Problems both seemed to appear about the same time and may be related.
Had backups on an external drive prior to the problem and appeared to be working. I have since cleaned the external drive in an attempt to start a new backup series but it continues to stop and report backup has failed.
The System restore was working fine and one day it had changed all the existing Restore Points to "System Image restore point"
but still showed all the different dates. In the System Properties window it indicates that there are 0 bytes in "current usages",
which I assume they are all empty but I can't create any new ones. I get Error code 0x80042308.
I have tried the Clean Boot with no results. I use MS Security Essentials for virus protection.
I have no other symptoms or problems on the PC.
About ready for a Recovery and start all over.
George M1

Hi,
Your first step should be to run chkdsk /r /f on all the drives in that computer. Shadow copy errors are often caused by disk problems (usually minor) which chkdsk will find and correct.
Also, this issue can be caused that VSS dlls are corrupted.
Re-install the VSS dlls by following these steps:
a. Using command prompt, CD to the WINDOWS\system32 directory
b. Stop the Volume Shadow Copy service by executing the command "net stop vss"
c. Register the following DLLs and services by executing these commands:
regsvr32 ole32.dll
regsvr32 vss_ps.dll
Vssvc /Register
regsvr32 /i swprv.dll
regsvr32 /i eventcls.dll
regsvr32 es.dll
regsvr32 stdprov.dll
regsvr32 vssui.dll
regsvr32 msxml.dll
regsvr32 msxml3.dll
regsvr32 msxml4.dll
Hope these could be helpful.
Kate Li
TechNet Community Support

Error source CAPI2 id 513 - Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object

Running Windows 8.1 PRO RTM x64 upgraded from Win 8 PRO. Updates to 8.1 as of 17 October installed
Event viewer still shows newly triggered Error(s) CAPI2 event id 513.
I can trigger this error by manually creating a restore point invoking VSS.
The VSS System Writer is listed and is error free.
Log Name:      Application
Source:        Microsoft-Windows-CAPI2
Date:          17/10/2013 20:32:19
Event ID:      513
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Machine -Name
Description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
    <EventID Qualifiers="0">513</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2013-10-17T19:32:19.935384000Z" />
    <EventRecordID>89898</EventRecordID>
    <Correlation />
    <Execution ProcessID="1404" ThreadID="2104" />
    <Channel>Application</Channel>
    <Computer>Machine-Name</Computer>
    <Security />
</System>
<EventData>
    <Data>
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
</Data>
</EventData>
</Event>

Thank you excellent post! I confirmed this fix worked for my situation as well. Below is more detailed post since it did not jump out for me the first time.
############################ Details ##############################
My operating system is Windows 8.1 after installing Visual Studio 2013 when Symantec System recover 2013 ran started seeing
the following errors in event logs.
################## Example event log errors #######################
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
################## Example event log errors #######################
Note: Confirmed this fix resolved my issue.
Step 1. Download and unzip accesschk.exe to C:\Temp http://download.sysinternals.com/files/AccessChk.zip
Step 2. Run cmd.exe prompt as Administrator go to Temp directory
C:\>cd Temp
Step 3. Run accesschk.exe
C:\Temp>accesschk.exe -c mslldp
################# Example output 1 #################################
Accesschk v5.10 - Reports effective permissions for securable objects
Copyright (C) 2006-2012 Mark Russinovich
Sysinternals - www.sysinternals.com
mslldp
RW NT AUTHORITY\SYSTEM
RW BUILTIN\Administrators
RW S-1-5-32-549
R NT SERVICE\NlaSvc
################# Example output 1 #################################
Step 4. Run following command.
C:\Temp>SC sdshow MSLLDP <---- Example text 1.
################# Example output 2 #################################
D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1
-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
################# Example output 2 #################################
Step 5. Run following command.
C:\Temp>SC sdshow MUP
################# Example output 3 #################################
D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;IU)
(A;;CCLCSWLOCRRC;;;SU) ######## <--- Example text 2. Grab this value. #######
S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
################# Example output 3 #################################
Step 6.
C:\Temp>
### Copy and past Example 1. line in notepad in command promt you can select all then copy the paste the text into notepad.
MSLLDP D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)
(A;;CCLCSWLOCRRC;;;SU) ######## <--- Insert Example text 2. here #######
S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
Run this command. (Note: Make sure its all one line no wordwrap that the webpage could be showing this text.)
C:\Temp> sc sdset MSLLDP D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)(A;;CCLCSWLOCRRC;;;SU)S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
Step 7.
##### Check the result #####
C:\Temp>accesschk.exe -c mslldp
################# Example output 4 #################################
Accesschk v5.10 - Reports effective permissions for securable objects
Copyright (C) 2006-2012 Mark Russinovich
Sysinternals - www.sysinternals.com
mslldp
RW NT AUTHORITY\SYSTEM
RW BUILTIN\Administrators
RW S-1-5-32-549
R NT SERVICE\NlaSvc
R NT AUTHORITY\SERVICE <--- You should now see this line.
################# Example output 4 #################################
Step 8.
Ran backup using Symantect System Recovery 2013 the event errors did not return after this fix. Great post again!
############################ Details ##############################

Diff b/w Web service and window service

What is the difference between web service and window service, whether the both are same or not, Give some explain about that each one and give some examples also.

An XML Web service is a component that implements program
logic and provides functionality for diseparate
applications. These applications use standard protocols,
such as HTTP, XML, and SOAP, to access the functionality.
XML Web services use XML-based messaging to send and
receive data, which enables heterogeneous applications to
interoperate with each other. You can use XML Web services
to integrate applications that are written in different
programming languages and deployed on different platforms.
In addition, you can deploy XML Web services within an
intranet as well as on the Internet. While the Internet
brings users closer to organizations, XML Web services
allow organizations to integrate their applications.
A Windows service starts much before any user logs in to
the system (if it has been setup to start at boot up
process). A Windows service can also be setup in such a way
that it requires a user to start it manually ? the ultimate
customization!
Windows services run as background processes. These
applications do not have a user interface, which makes them
ideal for tasks that do not require any user interaction.
You can install a Windows service on any server or computer
that is running Windows 2000, Windows XP, or Windows NT.
You can also specify a Windows service to run in the
security context of a specific user account that is
different from the logged on user account or the default
computer account. For example, you can create a Windows
service to monitor performance counter data and react to
threshold values in a database.

Socket Exception Invalid argument create on Windows service in process mode

Please help , Iam getting SocketException Error on connecting with mysql using jdbc also when connect to Activemq jms. Strange thing is this is only
happening on Windows Server(2008) and when i run the application as Windows service with 'jvm' (in-process) option. Program can connect
when i run as Java exe in the Windows Service.
Java JDK version - jdk1.6.0_26.
Thanks in advance, please ask if any more info needed.
-- mysql connect--
Database Driver="com.mysql.jdbc.Driver" Host="jdbc:mysql://localhost:3306/mydb?useUnicode=true&characterEncoding=UTF8" User="admin" Password="password"
Java.net.SocketException
MESSAGE: Invalid argument: create
STACKTRACE:
java.net.SocketException: Invalid argument: create
at java.net.Socket.createImpl(Socket.java:397)
at java.net.Socket.<init>(Socket.java:371)
at java.net.Socket.<init>(Socket.java:189)
at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:124)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:225)
at com.mysql.jdbc.Connection.createNewIO(Connection.java:1779)
at com.mysql.jdbc.Connection.<init>(Connection.java:450)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:411)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at myapp.JDBCLoader.JDBCConnect(JDBCLoader.java:129)
----on activemq connect ---
javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:61616?connectionTimeout=0&keepAlive=true&wireFormat.maxInactivityDuration=0. Reason: java.net.SocketException: Invalid argument: create
at org.apache.activemq.util.JMSExceptionSupport.create(JMSExceptionSupport.java:35)
at org.apache.activemq.ActiveMQConnectionFactory.createActiveMQConnection(ActiveMQConnectionFactory.java:286)
at org.apache.activemq.ActiveMQConnectionFactory.createActiveMQConnection(ActiveMQConnectionFactory.java:230)
at org.apache.activemq.ActiveMQConnectionFactory.createQueueConnection(ActiveMQConnectionFactory.java:193)
at sen.connector.queue.ConnectionFactory.createQueueConnection(ConnectionFactory.java:60)
at sen.connector.queue.ConnectionFactory.createQueueConnection(ConnectionFactory.java:36)
at sen.connector.queue.HostConnection.connectToHost(HostConnection.java:147)
at sen.connector.queue.HostConnection.run(HostConnection.java:127)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.net.SocketException: Invalid argument: create
at java.net.Socket.createImpl(Socket.java:397)
at java.net.Socket.connect(Socket.java:527)
at org.apache.activemq.transport.tcp.TcpTransport.connect(TcpTransport.java:484)
at org.apache.activemq.transport.tcp.TcpTransport.doStart(TcpTransport.java:447)
at org.apache.activemq.util.ServiceSupport.start(ServiceSupport.java:53)
at org.apache.activemq.transport.InactivityMonitor.start(InactivityMonitor.java:127)
at org.apache.activemq.transport.TransportFilter.start(TransportFilter.java:58)
at org.apache.activemq.transport.WireFormatNegotiator.start(WireFormatNegotiator.java:72)
at org.apache.activemq.transport.TransportFilter.start(TransportFilter.java:58)
at org.apache.activemq.transport.TransportFilter.start(TransportFilter.java:58)
at org.apache.activemq.ActiveMQConnectionFactory.createActiveMQConnection(ActiveMQConnectionFactory.java:266)
Edited by: 891207 on Oct 12, 2011 8:14 PM
Edited by: 891207 on Oct 12, 2011 8:17 PM

I'm sure that exception can be caused by the firewall.The exception below is what is caused by a firewall. Anyway the OP said that it worked fine running as a windows service, so that would rule-out a firewall. Also connections to 'localhost' don't go through the firewall.
Expecting people to know that 'try a different JVM' I already explained that
my initial diagnosis was incorrectHave a nice day.
- Mike
java.sql.SQLException: IO Error: The Network Adapter could not establish the connection
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:512)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
554)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:232)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:28)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:553)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at JDBCTest4.main(JDBCTest4.java:53)
Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:388)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:430)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:871)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:264)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1598)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:360)
... 7 more
Caused by: java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:146)
at oracle.net.nt.ConnOption.connect(ConnOption.java:129)
at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:366)

How to get 'clover.cmd' running as Windows service?

Right now I have the InDesign instances all running great as services so on a server reboot they start up fine. The clover/lbq part is just the .cmd script and it's not running as a service. I looked in the documentation but haven't found any info on getting clover to run as a Windows service.
Anyone know how to set it to do this? I'm on InDesign CS6 (server).
thanks.

This information is in the Install Guide that comes with EAS.Running EAS as a Windows service is an option you can select when you install it. If you did not do that, you can set it up to run as service by doing the following: (From the EAS Install Guide)----------------------------------------Adding Administration Server as a Windows ServiceYou can add Administration Server as a Windows service, even if it was not installed as a Windows service.?To add Administration Server to the list of Windows services:1. From a command prompt, navigate to the following directory: EASPATH\eas\server\bin2. Run the following command: install_service.batAdministration Services installs the Windows service as Hyperion-Essbase_Administration_Server Windows service. A message displayed in the command prompt window indicates that the service is installed.3. Start the Hyperion-Essbase_Administration_Server Windows service. See ?Starting the Administration Server Windows Service? on page 49.The Hyperion-Essbase_Administration_Server Windows service is set to start automatically each time you reboot.

Create an Event log entry in Event Viewer in Windows 7, when processor exceeds a set percentage of usage

Hi, I am trying to create an Event log entry in Event viewer in Windows 7 when the processor exceeds a set percentage of usage. I have unsuccessfully tried doing this through a Data Collection Set in the User Defined folder to monitor CPU usage
and to trigger an Alert and log an entry when the CPU exceeds a set percentage of usage. Any suggestions, and please if possible keep them simple and easy to follow, I am not to familar with Windows 7.

Hi, I am trying to create an Event log entry in Event viewer in Windows 7 when the processor exceeds a set percentage of usage. I have unsuccessfully tried doing this through a Data Collection Set in the User Defined folder to monitor CPU usage
and to trigger an Alert and log an entry when the CPU exceeds a set percentage of usage. Any suggestions, and please if possible keep them simple and easy to follow, I am not to familar with Windows 7.

Installation issue : sql server 2008 r2 some services failed to installed on windows 7

I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
database engine service : failed
SQL Server Replication : failed
Full-Text Search : failed
Analysis Services : failed
Reporting Services : failed
And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
Overall summary:
Final result:                  User cancelled
Exit code (Decimal):           -2068380094
Exit facility code:            1207
Exit error code:               1602
Exit message:                  User has cancelled.
Start time:                    2014-08-14 21:15:26
End time:                      2014-08-14 21:23:58
Requested action:              AddNode
Machine Properties:
Machine name:                  MANJU-PC
Machine processor count:       4
OS version:                    Windows Vista
OS service pack:
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Database Engine Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            SQL Server Replication
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Full-Text Search
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSAS10.MSSQLSERVER             Analysis Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSRS10.MSSQLSERVER             Reporting Services
1033                                      10.0.1600.22
No
Sql Server 2008
Management Tools - Basic                 1033                 Developer Edition
10.0.1600.22    No
Sql Server 2008
Management Tools - Complete              1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity                1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility     1033                 Developer Edition    10.0.1600.22    No
Sql Server 2008
Client Tools SDK                         1033
Developer Edition    10.0.1600.22    No
Sql Server 2008
Integration Services                     1033                 Developer Edition
10.0.1600.22    No
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
Installation edition:          DEVELOPER
User Input Settings:
ACTION:                        AddNode
AGTSVCACCOUNT:                 <empty>
AGTSVCPASSWORD:                *****
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 *****
CONFIGURATIONFILE:
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERNETWORKNAME:    <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 *****
HELP:                          False
INDICATEPROGRESS:              False
INSTANCENAME:                  <empty>
MEDIASOURCE:                   D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
SQLSVCACCOUNT:                 <empty>
SQLSVCPASSWORD:                *****
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
Detailed results:
Feature:                       Integration Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Connectivity
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools SDK
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Business Intelligence Development Studio
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
    Message:
        User has cancelled.
    Stack:
        at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
        at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
        at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
        at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
        at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)

Requested action:              AddNode
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Database Engine Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            SQL Server Replication
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Full-Text Search
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSAS10.MSSQLSERVER             Analysis Services
1033                                      10.0.1600.22
No
Sql Server 2008      MSSQLSERVER          MSRS10.MSSQLSERVER             Reporting Services
1033                                      10.0.1600.22
No
Sql Server 2008
Management Tools - Basic                 1033                 Developer Edition
10.0.1600.22    No
Sql Server 2008
Management Tools - Complete              1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity                1033                 Developer Edition    10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility     1033                 Developer Edition    10.0.1600.22    No
Sql Server 2008
Client Tools SDK                         1033
Developer Edition    10.0.1600.22    No
Sql Server 2008
Integration Services                     1033                 Developer Edition
10.0.1600.22    No
Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
You already have SQL server 2008 installed on your machine as per feature discovery report
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Event ID:4375 Windows Servicing failed to complete process of setting package KB948465

Similar Messages

Maybe you are looking for