Event ID 7000 Diagnostic Service Host failed to start. Privilege in service requiring to function doesn't exist in service account configuration.

I have Windows 7 Home Premium. I get this error when I try to start the Windows Search service. All of the solutions that I've seen talk about changing Security Settings | Local Policies | User Rights Assignment. However, from what I can determine in Home
Premium there is no way to access those settings or anything to do with group policies. Does anyone have any other ideas?
Thanks,

Hi T_Meyer,
Thanks for feedback.
Actually, I am waiting for OP come back. In my first reply, I confirm the question first, because the
User Rights Assignment setting would be reflected to the registry data.
I know the current Home Premium does not contain the Group Policy Editor, but we need know if this is the real cause for this issue.
Back to the answer:
To edit the user rights, alternatively, we can use ntrights tool, although this is no longer supported after Windows XP, but we can still use it:
http://support.microsoft.com/kb/266280
set the SeSystemProfilePrivilege for NT Service\WdiServiceHost
we can get it from this download link:
http://www.microsoft.com/en-in/download/details.aspx?id=17657
Alex Zhao
TechNet Community Support

Similar Messages

Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen

The Health Service could not log on the RunAs account ...event ID 7000 Health Service

Hello everyone,
While using the Web Application Transaction Monitoring to monitor certain websites using specific credentials, this Event 7000 occures on the Watcher Nodes which happen to be also Management Servers.
Here are the details:
The Run As Accounts used are Windows account types.
They have been tested on the websites and are correct.
In the Distribution the More Secure option is selected but no object is present. They are used only for web monitoring.
The Web Application in WATM is using NTLM as the authentication method.
In Monitoring, the web application appears healthy as it is working properly and is being correctly monitored.
In Profiles there is a User Authentication Action Account profile created automatically and has the Run As Account. It is scoped to the management server which is also the watcher node for the web application.
The problem:
On the management server acting as a Watcher Node for the web application, in the OpsMgr log the event ID 7000 is recorded, causing a trigger for a monitor that changes the health of the Management Server to Warning. The monitor should automaticaly resolve
when all Run As Accounts are validated.
Any ideeas on how to resolve this issue without overriding the monitor?
Thanks,
Marius
http://mariusene.wordpress.com/

The SCOM Run As Account wizard does not allow me to specify the basic/simple/digest type account in the form domain\username. I belive the website uses Windows integrated (NTLM) authentication so there is no workaround but to create a Windows
Account type in SCOM.
I just dont want the Health Service to try to validate the run as account locally on the watcher node because its in a different domain.
I suppose in this case a disable of the monitor for those watcher nodes is the only solution?
http://mariusene.wordpress.com/

Service apple mobile device failed to start privileges

I tried to download the latest version of ITunes, and I received this message: Service Apple mobile device failed to start. Verify that you have sufficient privileges to start system services.
How can i solve the problem?
Thanks for your help.
Ephrem65

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Virtual Machine Failes to Start: Server execution failed (0x80080005).

Hi
I have a Windows 8.1 (with updates) System which was upgraded from Windows 8.0 using a Clean Install. Recently Hyper-V has stopped running on my system.
The Event log shows an error:
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
-    System
-    Provider
           [ Name]    Microsoft-Windows-Hyper-V-VMMS
           [ Guid]    {6066F867-7CA1-4418-85FD-36E3F9C0600C}
   EventID    15500
   Version    0
   Level    2
   Task    0
   Opcode    0
   Keywords    0x8000000000000000
-    TimeCreated
           [ SystemTime]    2014-07-17T07:57:28.568965100Z
   EventRecordID    302
   Correlation
-    Execution
           [ ProcessID]    4040
           [ ThreadID]    1396
   Channel    Microsoft-Windows-Hyper-V-VMMS-Admin
   Computer    viveksasmung
-    Security
           [ UserID]    S-1-5-18
-    UserData
-    VmlEventLog
   VmName    CentOS65
   VmId    9EF5529D-3755-40B3-AC6A-325A564D19BB
   ErrorMessage    %%2148007941
   ErrorCode    0x80080005
The WMI-Activity log shows the error:
Id = {00000000-0000-0000-0000-000000000000}; ClientMachine = VIVEKSASMUNG; User = viveksasmung\Vivek; ClientProcessId = 9756; Component = Core; Operation = Start IWbemServices::ExecNotificationQuery - root\virtualization\v2 : select * from __InstanceDeletionEvent
within 2 where TargetInstance ISA 'Msvm_ComputerSystem' ; ResultCode = 0xC7F0FCD0; PossibleCause = Could not send status to client
The Hyper-V-VMMS Admin Log shows the error:
The worker process for virtual machine 'CentOS65' failed to respond within the startup timeout period and was restarted. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
The Hyper-V Worker Log shows the error:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005). As a result, some WMI operations may not function correctly. To correct the problem, try restarting the Windows
Management Instrumentation service.
I set the Hyper-V Tracing to ON using vmconnect.config
file and the error log is as follows:
Tracing Hyper-V Client version: 6.3.0.0. Rough build date (virtman file written): 05/18/2014 23:25:02
2014-07-17 01:55:28.990 [08] USER_ACTION_INITIATED VMBrowser ServerNode:ConnectToServer() Connecting to server localhost...
2014-07-17 01:55:29.008 [08] USER_ACTION_COMPLETED VMBrowser ServerNode:ConnectToServer() Successfully connected to server.
2014-07-17 01:55:29.463 [07] WARNING VirtMan WmiAssociation:GetRelatedObjects() The WMI object 'Msvm_RdvComponentSettingData' + could not be mapped to VirtMan type so ignore it.
2014-07-17 01:55:33.001 [03] USER_ACTION_INITIATED VMBrowser ServerNodeViewControl:OnStartVm() Starting VM(s)...
2014-07-17 01:55:33.023 [09] USER_ACTION_INITIATED VMBrowser VMActionBatchPerformer:Perform() Changing virtual machine '9EF5529D-3755-40B3-AC6A-325A564D19BB' ('CentOS65') state from 'PowerOff' to 'Running'
2014-07-17 01:59:33.927 [12] ERROR VirtMan ThrowHelper:ThrowVirtualizationOperationFailedException() Operation 'SetState' failed with message ''CentOS65' failed to start.'.
    Error code '32768'.
    Detailed message ''CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)'.
2014-07-17 01:59:33.930 [12] ERROR VMBrowser VMActionBatchPerformer:OnTaskCompleted() Tracked task operation failed!
    'CentOS65' failed to start.
       at Microsoft.Virtualization.Client.Management.ThrowHelper.ThrowVirtualizationOperationFailedException(String errorMsg, String errorDescriptionMsg, VirtualizationOperation operation, Int64 errorCode, Boolean operationCanceled,
ErrorCodeMapper mapper, Exception innerException)
   at Microsoft.Virtualization.Client.Management.View.EndMethodReturnInternal(IVMTask task, VirtualizationOperation operation, Boolean affectedElementExpected)
   at Microsoft.Virtualization.Client.Management.VMComputerSystemBaseView.EndSetState(IVMTask setStateTask)
   at Microsoft.Virtualization.Client.VMBrowser.ChangeVMStatePerformer.EndTrackedTask(IVMTask task)
   at Microsoft.Virtualization.Client.VMBrowser.VMActionBatchPerformer.OnTaskCompleted(Object sender, EventArgs e)
2014-07-17 01:59:46.103 [03] USER_ACTION_INITIATED VMBrowser ServerNode:DisconnectFromServer() Disconnecting from server localhost...
2014-07-17 01:59:46.104 [03] USER_ACTION_COMPLETED VMBrowser ServerNode:DisconnectFromServer() Server had been disconnected successfully.
Upon using BCDEdit, output is below
Windows Boot Manager
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume1
path                    \bootmgr
description             Windows Boot Manager
locale                  en-GB
default                 {current}
resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
displayorder            {current}
                        {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
timeout                 30
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.exe
description             Windows 8.1 Pro with Media Center
locale                  en-GB
recoverysequence        {3ce506df-cc90-11e3-8b9f-8a809d5a6432}
recoveryenabled         Yes
osdevice                partition=C:
systemroot              \Windows
resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
bootmenupolicy          Legacy
hypervisorlaunchtype    Auto
quietboot               No
Real-mode Boot Sector
identifier              {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
device                  partition=C:
path                    \Hd0Par3.pbr
description             Ubuntu LTS 14.04
I have set permissions to the VHD folder using the command below
icacls "c:\CentOS65\CentOS65" /grant "CREATOR OWNER":(OI)(CI)(IO)F
icacls "c:\CentOS65\CentOS65" /grant "NT AUTHORITY\SYSTEM":(OI)(CI)F
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome_9E7FEF2E-85E0-4278-AABD-01D5E45EE643.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65_28FF0E50-0FBA-4754-A4CC-B3DAEC7E3DAA.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Machines\9EF5529D-3755-40B3-AC6A-325A564D19BB.xml" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
I am unable to create new VMs as well.
I have already run
sfc/ scannow
DISM
Already Tried disabling the antivirus
Upon using wbemtest and connecting to root\virtualization, I am able to click Enum Classes > Recursive
Kindly suggest how to get HyperV working please. Any help (short of reinstalling /resetting windows) would be much appreciated.
Warm Regards,
Dr Vivek Gupta

Hi,
The key point would be this:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005).
Please open MMC, add Component Services snap-in:
Component Services -> Computers -> My Computer -> DCOM Config -> Windows Management Instrumentation -> Right Click, Properties -> Security “Launch and Activation Permission” -> Edit -> gave Authenticated Users
Full Control
Check the result.
Alex Zhao
TechNet Community Support

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

Communication from the Oracle Mngt service host to the agent host failed

Hi There,
I have installed Oracle 10.2.0.1 Grid software on a Solaris Zone. I plan to upgrade it to 10.2.0.5 very soon but would like to test the agent connection from a remote server first. I installed agent version 10.2.0.5 on the remote server. When I log into the oracle grid GUI I can see the host called "localhost" (this is not the correct name. It should be the server name) and the database instances on that server. However, when I select the localhost and press the configure button I get the following message:
Communication from the Oracle Mngt service host to the agent host failed. Refer to help for details localhost:cn=servername
The system administrators changed the /etc/hosts file to make sure the server was listed first fully qualified. For example: servername.domain.com instead of servername. However, this did no make a difference.
Could the issue be any of the following:
- Oracle 10.2.0.1 GRID does not work with 10.2.0.5 agents ?
- Oracle GRID in general don't work on SOLARIS Zones?
Please help.
Thanks.

OMS - -> Agent communication is not upward compatible
Downward, so Agent 10.2.0.1 --> OMS 10.2.0.5, should not be a problem.
In the last case however, you would not have access to any 10.2.0.5 Agent features.
So you can choose from 2 working options:
1 - Install the 10.2.0.1 Agent
2 - Upgrade your OMS to 10.2.0.5 (preferable)
Regards
Rob
For more info, tips and tricks on OEM GC, check http://oemgc.wordpress.com

Microsoft Office can't find your license for this application - multiple copies of Office 2013 x32 failing to start, Software Protection Service timing out

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

Group MSA account fail when Domain Controller in Test Domain Fails to start KdsSvc. Event ID 7023

Yesterday, in my test domain, I created the KDS root key using the Add-KdsRootKey –EffectiveTime ((get-date).addhours(-10))
command on a DC that is not the PDC Emulator because it was the server I was on at the time. Today, when I tried to create gMSA accounts on the PDC emulator, I get:
Event ID 7023 The Microsoft Key Distribution Service terminated with the following error: An Exception occurred in the service when handling the control request
I turned on logging on to the KdsSvc and get 2 other errors:
KdsSvc Event ID 4001: Group Key Distribution Service failed to start. Status 0x80070020
KdsSvc Event ID 4007: Group Key Distribution Service cannot connect to the domain controller on local host. Status 0x80070020. Group Key Distribution Service cannot be started because of the error. Please contact the administrator to resolve
the issue.
I took the opportunity to clean up AD, the Schema, and DNS, but the kds errors continues. I am replicating successfully, DNS changes are reflected immediately, and when I run the get-KDSRootKey on the failing server, the key is returned. The
Get-KdsConfiguration matches the KDS config on the DC that originally ran to create the key.
I have a pretty strict GPO pushed to my DCs but I am still able to create gMSAs on the other server. I checked ADS&S and found the msKds-ProvRootKey so I know it is at the domain level, but there is so little documentation on the KdsSvc that I
am not sure if it is working as planned. I have tried unassigning several GPO configuration items but I am throwing darts at this point. I have also uninstalled McAfee AV; IDS/IPS; Firewall.
With that said, I have questions:
Will gMSAs still work even though the domain pdc emulator cannot start the service?
Is the KdsSvc supposed to start only on the server Add-KDSRootKey was originally created?
What happens if the server the KdsSvc key was created fails and has to be removed from the domain?
Is there any books or configuration items I can review to learn the KdsSvc better?
Env:
Windows Standard Server 2012 R2 x64
Active Directory 2012 R2 Schema Updated from Windows 2008 R2
All FSMO roles are on the PDC Emulator which is a Windows 2012 R2 DC
DCDiag returns no errors or test failures
Repadmin returns clean results (/showreps & /replsum)
Windows 2008 R2 Root CA hierarchy (not DCs)
W32tm services are running with less than 6/10's of a ms difference among the domain.

Hi,
For Windows Server 2012, the Windows PowerShell cmdlets default to managing the group Managed Service Accounts instead of the original standalone Managed
Service Accounts.
New-ADServiceAccount -name <ServiceAccountName> -DNSHostName <fqdn> -PrincipalsAllowedToRetrieveManagedPassword <group>
-ServicePrincipalNames <SPN1,SPN2,…>
Did you use the command abouve?
Here is a good bolg:
Windows Server 2012: Group Managed Service Accounts
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Hope this helps.

Unified Contact Store UCS integration issue - Event Source: LS Storage Service - Event ID: 32043

Experiencing weird issues with getting UCS working in one environment (including OWA/IM and UM). Event Source: LS Storage Service - Event ID: 32043
I've had no issues with UCS in other environments with multiple 2013 Mailbox servers and multiple 2013 CAS servers. This particular environment is having issues. I do have Exchange split with MBX and CAS.
I Followed all procedures from TechNet, NextHop, etc. I am Running same oAuth cert on all exchange and lync boxes.
I still have Lync 2010 and Exchange 2010 in the environment, since I'm in the middle of a coexistence migration but don't really want to cut over to new servers until the Lync 2013 to Exchange 2013 integration is complete and tested.
Test-CsExStorageConnectivity -SipUri [email protected]
Test-CsExStorageConnectivity : ExCreateItem exchange operation failed,
code=574, reason=StoreContext{traceId=[2048369003],
activityId=[53f4e8c5-e7e3-491a-adf4-cef37c517cb4]}StoreException:
code=ErrorUnhandledException, reason=Wrapped callback failed --->
System.InvalidOperationException: Client found response content type of '',
but expected 'text/xml'.
I have had a case opened with MS for weeks now and have torn down and rebuilt the config several times - the certificates should solid all around including using servers' FQDNs in the SN instead of just somewhere in the SAN list and using just the domain as
the SN for the oAuth certs (using the exact same cert on both Lync and Exchange for oAuth)
Any comments would be greatly appreciated
Here are the steps i did on the integration (certificates not included however they are verified)
****************** ON LYNC
Get-CsCertificate -Type OAuthTokenIssuer
Issuer : CN=dc02, DC=domain, DC=com
NotAfter : 11/12/2015 5:38:22 PM
NotBefore : 11/12/2013 5:38:22 PM
SerialNumber : 360000000901D6BF9542A0E971000100000009
Subject : CN=domain.com, OU=IT Department, O="Customer Name",
L=Santa Clarita, S=California, C=US
AlternativeNames : {}
Thumbprint : A42D2481AB68473EB25B78DAB8964ADDFF9F8245
EffectiveDate : 11/12/2013 5:48:30 PM
PreviousThumbprint :
UpdateTime :
Use : OAuthTokenIssuer
SourceScope : Global
Set-CsOAuthConfiguration -Identity Global -ExchangeAutoDiscoverURL 'https://excas02.domain.com/autodiscover/autodiscover.svc'
New-CsPartnerApplication -Identity Exchange -ApplicationTrustLevel Full -MetadataUrl "https://excas02.domain.com/autodiscover/metadata/json/1"
Identity : Exchange
AuthToken : Value=https://excas02.domain.com/au
todiscover/metadata/json/1
Name : Exchange
ApplicationIdentifier : 00000002-0000-0ff1-ce00-000000000000
Realm : domain.com
ApplicationTrustLevel : Full
AcceptSecurityIdentifierInformation : False
Enabled : True
Get-CsOAuthConfiguration
Identity : Global
PartnerApplications : {Name=Exchange;ApplicationIdentifier=00000
002-0000-0ff1-ce00-000000000000;Realm=ushw
orks.com;ApplicationTrustLevel=Full;Accept
SecurityIdentifierInformation=False;Enable
d=True}
OAuthServers : {}
Realm : domain.com
ServiceName : 00000004-0000-0ff1-ce00-000000000000
ExchangeAutodiscoverUrl : https://excas02.domain.com/autodisco
ver/autodiscover.svc
ExchangeAutodiscoverAllowedDomains :
****************** ON Exchange
[Get-AuthConfig
RunspaceId : 2b3c00ee-adbf-45a0-81d1-dc87d1e8aa6f
CurrentCertificateThumbprint : A42D2481AB68473EB25B78DAB8964ADDFF9F8245
PreviousCertificateThumbprint :
NextCertificateThumbprint :
NextCertificateEffectiveDate :
ServiceName : 00000002-0000-0ff1-ce00-000000000000
Realm :
Name : Auth Configuration
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
DistinguishedName : CN=Auth Configuration,CN=Customer,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : Auth Configuration
Guid : db55e975-4986-49b7-a799-15ecb8c40e8f
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Auth-Auth-Config
ObjectClass : {top, container, msExchContainer, msExchAuthAuthConfig}
WhenChanged : 1/28/2014 5:37:30 PM
WhenCreated : 10/8/2013 6:35:32 PM
WhenChangedUTC : 1/29/2014 1:37:30 AM
WhenCreatedUTC : 10/9/2013 1:35:32 AM
OrganizationId :
OriginatingServer : DC04.domain.com
IsValid : True
ObjectState : Unchanged
Set-ClientAccessServer -identity excas02 -AutodiscoverServiceInternalUri 'https://excas02.domain.com/autodiscover/autodiscover.xml'
Get-ClientAccesSserver excas02 | fl
RunspaceId : 568a785b-b51f-459a-abf2-d7283744a84a
Name : EXCAS02
Fqdn : EXCAS02.domain.com
OutlookAnywhereEnabled : True
AutoDiscoverServiceCN : EXCAS02
AutoDiscoverServiceClassName : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri : https://excas02.domain.com/autodiscover/autodiscover.xml
AutoDiscoverServiceGuid : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope : {West}
AlternateServiceAccountConfiguration :
IsOutOfService : False
WorkloadManagementPolicy : DefaultWorkloadManagementPolicy_15.0.505.0
Identity : EXCAS02
IsValid : True
ExchangeVersion : 0.1 (8.0.535.0)
DistinguishedName : CN=EXCAS02,CN=Servers,CN=Exchange Administrative Group
(FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Customer,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Guid : 2d3b4138-a933-46e1-b5da-3f7115cb5d00
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass : {top, server, msExchExchangeServer}
WhenChanged : 1/30/2014 11:35:25 AM
WhenCreated : 10/8/2013 7:06:35 PM
WhenChangedUTC : 1/30/2014 7:35:25 PM
WhenCreatedUTC : 10/9/2013 2:06:35 AM
OrganizationId :
OriginatingServer : DC04.domain.com
ObjectState : Unchanged
cd "C:\Program Files\Microsoft\Exchange Server\V15\Scripts\"
.\Configure-EnterPrisePartnerApplication.ps1 -AuthMetadataUrl "https://lyfe02.domain.com/metadata/json/1" -ApplicationType Lync
Creating User <LyncEnterprise-ApplicationAccount> for Partner Application.
Created User <domain.com/Users/LyncEnterprise-ApplicationAccount> for Partner Application.
Assigning role <UserApplication> to Application User <domain.com/Users/LyncEnterprise-ApplicationAccount>.
Assigning role <ArchiveApplication> to Application User <domain.com/Users/LyncEnterprise-ApplicationAccount>.
Creating Partner Application <LyncEnterprise-dd9f8b8f52fd4b4fb5f928a0d4a02b9c> using metadata <https://lyfe02.ushwor
ks.com/metadata/json/1> with linked account <domain.com/Users/LyncEnterprise-ApplicationAccount>.
Created Partner Application <LyncEnterprise-dd9f8b8f52fd4b4fb5f928a0d4a02b9c>.
THE CONFIGURATION HAS SUCCEEDED.
****************** On Lync
****************** ERROR
Test-CsExStorageConnectivity -SipUri [email protected]
Test-CsExStorageConnectivity : ExCreateItem exchange operation failed,
code=574, reason=StoreContext{traceId=[2109175579],
activityId=[cf8138ff-9436-4f56-937e-26ab8c712ab2]}StoreException:
code=ErrorUnhandledException, reason=Wrapped callback failed --->
System.InvalidOperationException: Client found response content type of '',
but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapCli
entMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)
at
System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult
asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndInv
oke(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndCre
ateItem(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Adaptor.ExStoreAdaptor.OnCreateItemComplet
e(IAsyncResult result)
at
Microsoft.Rtc.Internal.Storage.StoreAsyncResult`1.CallbackWrapper(IAsyncResult
result)
--- End of inner exception stack trace ---
at Microsoft.Rtc.Internal.Storage.Api.StorageService.EndExecuteCommand(IAsyn
cResult asyncResult)
, exception=System.ServiceModel.FaultException:
StoreContext{traceId=[2109175579],
activityId=[cf8138ff-9436-4f56-937e-26ab8c712ab2]}StoreException:
code=ErrorUnhandledException, reason=Wrapped callback failed --->
System.InvalidOperationException: Client found response content type of '',
but expected 'text/xml'.
The request failed with an empty response.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapCli
entMessage message, WebResponse response, Stream responseStream, Boolean
asyncCall)
at
System.Web.Services.Protocols.SoapHttpClientProtocol.EndInvoke(IAsyncResult
asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndInv
oke(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Exchange.Ews.ExchangeServiceBinding.EndCre
ateItem(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Storage.Adaptor.ExStoreAdaptor.OnCreateItemComplet
e(IAsyncResult result)
at
Microsoft.Rtc.Internal.Storage.StoreAsyncResult`1.CallbackWrapper(IAsyncResult
result)
--- End of inner exception stack trace ---
at Microsoft.Rtc.Internal.Storage.Api.StorageService.EndExecuteCommand(IAsyn
cResult asyncResult)
Server stack trace:
at
System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime
operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action,
Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeEndService(IMethod
CallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)
at
Microsoft.Rtc.Internal.Storage.IStorageService.EndExecuteCommand(IAsyncResult
asyncResult)
at Microsoft.Rtc.Management.Lyss.Cmdlets.LyssCmdletCommon.ExecuteExCommand(S
toreOperation operation, String sipUri, BaseRequestType ewsRequest, Nullable`1
autoCreateParentFolder, IStorageService& client, Boolean reAuthorize), inner
exception=. Please check event log and trace for relevant information.
At line:1 char:1
+ Test-CsExStorageConnectivity -SipUri [email protected]
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Test-CsExStorageConnectiv
ity], FaultException
+ FullyQualifiedErrorId : ErrorExecuteExchangeCommandFailedWithFaultExcept
ion,Microsoft.Rtc.Management.Lyss.Cmdlets.TestExStorageConnectivityCmdlet
Test failed.
PS C:\Users\jmadsen>
Jens

I fixed the issue
It had to do with the Lync server still trying to access the old CAS server
For internal URLs on both CAS servers I am using the internal name, however the external url is https://webmail.domain.com
On both servers and internally that DNS record points to the old CAS server since we haven't cut over users yet
This was affecting the connection process some how Lync was using the external URL instead of the internal URL to connect to EWS
I was able to see with a packet sniffer that Lync frontend was trying to communicate with both the new CAS server and the old CAS server
When connecting to auto discovery it was connecting to the right CAS server, but after receiving the Autodiscover.xml it started connecting to webmail.ushworls.com (not EXCAS02)
I create an entry in the local HOST file on the Lync Front end server and pointed webmail.domain.com to the new CAS server
Issue Fixed – I can remove the entry from the host file after we make the DNS change internally and cut over users

SRV2008R2 SP1: Software Protection Service failed to start. RDP not working

Hi folks,
I'm currently working on an issue on a Windows 2008 R2 SP1 Hyper-V Host where RDP from one moment tio the other does not work anymore.
After an investigation I found that the Software Protection Service can't be started. The following events are recorded every few minutes:
Event ID: 1001 - The Software Protection service failed to start. 0x80070002. 6.1.7601.17514
Event ID: 7023 - The Software Protection service terminated with the following error: The system cannot find the file specified.
I searched and found a lot of possible solutions which are shortly listed below:
I have confirmed that the sppsvc.exe file exists and has the proper permissions. Also replaced the file with the same file from another 2008R2 server
Checked the spldr start value via HKLM\System\CurrentControlSet\Services\spldr. This is 0 which should be fine.
Checked the sppsvc paths and settings via HKLM\System\CurrentControlSet\Services\sppsvc. All are correct.
SFC /Scannow + CHKDSK /r
System restore is (off course) not available
Tried to reactivate the server by recording a different product key. Did not work.
Removed the last batch of Windows Updates that were pushed towards the host. We believed it was caused by this but since you don't always need a host but only the VM's hosted on it it was a while ago since we logged in.
Local firewall enabled and disabled. Also
Netstat does not show any listening ports for RDP (3389)
Changed the port to 3390 but this port is not visible as well
Also RDP from the affected machine to localhost does not work
Since I can't find any more options in fixing this issue I'm wondering if someone else has some ideas which I can try. Otherwise a reinstall needs to be done.
Hope to hear from you

Hi,
Based on your description, I noticed that you have tried lots of ways to solve this issue. On current situation,
would you please let me confirm more details?
Type services.msc in RUN to open Services. Then navigate to Software Protection service. If start it manually, what error message will get?
I’m not sure if RDP issue was caused by the Software Protection service. So, would you please let me know the complete error message when RDP didn’t work? Meanwhile, please
open Event Viewer and follow the path: Applications and Services Logs-> Microsoft-> Windows-> TerminalServices-LocalSessionManager and TerminalServices-RemoteConnectionManager. Please check if can find more clues. Those may help us to go further analyze
RDP issue.
Please
perform a clean boot and check if this issue still exists.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Missing boot events on the Diagnostic performance operational log (event-id 100)

I noticed that event (100) is not always reported or not reported at all on several machines and I would like to understand how can I force reporting it.
In addition I would appreciate if you can explain regarding the keys under:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
Things I've already tested on win7:
1. Verified that the diagnostic performance > operational log is enabled
2. Services: ‘Diagnostic Policy Service’ (auto) and ‘Diagnostic service host’ (manual) were running
3. Verified that GPO is not disabled for:
- Computer Configuration\Administrative Templates\System\Troubleshooting
- Diagnostics\Windows Boot Performance Diagnostics Computer Configuration\Administrative Templates\System\Troubleshooting and Diagnostics\Diagnostics: Configuration scenario executing level
Thanks,

For keys under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
Please take a look of discussions in this link(reply posted by David J)
Diagnostics-Performance log Event 100 - Critical, Error, or Warning - when and why?
http://social.technet.microsoft.com/Forums/windows/en-US/48005f5d-5f66-439a-af51-3a2ebb894e31/diagnosticsperformance-log-event-100-critical-error-or-warning-when-and-why?forum=w7itproperf
My understanding to this issue—“event (100) is not always reported or not reported at all on several machines”
is that : this kind event log occurs when an time parameter during the boot process reaches a threshold in the registry key, then a warning, critical or error message will appear in the event viewer. If it doesn’t reach the threshold, then there will be
no report.
Regards
Yolanda
TechNet Community Support

The saposcol service failed to start.

Hi everyone:
- We have detected that in our production database system there are two error messages:
1. The saposcol service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
EVENT ID: 7000
And
2. Timeout (30000 milliseconds) waiting for the saposcol service to connect.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
EVENT ID: 7009
- Both of them have as source the Service Control Manager.
The database system is a Windows cluster where the portal SCS are running with Oracle 9.2.0.5. The OS is a Microsoft Windows Server 2003 Enterprise Edition.
The path to the executable saposcol.exe is:
C:\WINNT\SapCluster\saposcol service
We have tried to uninstall and install the service as in note 82751 (through the windows services window), and the service saposcol is started, but these two errors steel appear.
We have the same structure at Test system and saposcol works properly. We thought if it could be possible that the overloading of the production system was causing a delay in the start of the saposcol service, and then the timeout is reached. Is it possible to increase this timeout, and in this case, will this solve the problem? (if so, how do we do increase it, and in which manner will affect our system?)
Thanks and regards,
Jose Sorli Esteve

hi,
install the saposcol service with administrator account
and change the logon from nt service manager to SAPService<SID> user
if it not works downlod the new one from sap service place
and re install it
regards,
kaushal

Failed to start service 'Web Farm Controller Service (WebFarmService)'

Hi,
Has any one had a similar issue when trying to set up the Web Site Cloud REST point?
I am trying to install the 'Web Sites service and third party dependencies' but I get the following error when trying to set up this feature:
500 Internal Server Error - Failed to configure databases and services: Failed to start service 'Web Farm Controller Service (WebFarmService)'.
The event logs show the following:
Service cannot be started. Microsoft.Web.Farm.WebFarmException: The type 'HostingController.HostingConfigManager' could not be loaded. The configuration settings may not be valid ---> System.Reflection.TargetInvocationException: Exception has been
thrown by the target of an invocation. ---> Microsoft.Web.Hosting.WebHostingObjectNotFoundException: No default connection string was found.
at Microsoft.Web.Hosting.SiteManager.GetDefaultConnectionString()
at Microsoft.Web.Hosting.SiteManager..ctor(RetryPolicy retryPolicy)
at HostingController.HostingConfigManager.ControllerHealthCheck()
at HostingController.HostingConfigManager..ctor(WaitCallback changeCallback)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindin...
everything is running using a domain admin account, I have tried to start the service manually but it fails with the following error message:
Windows could not start the Web Farm Controller Service service on Local Computer: Error 0x80131500: 0x80131500
Any Help would be appreciated.
Thanks
Doug

I uninstalled the Web Farm Framework and reinstalled it from the Web Platform Installer. That worked. The next error was:
Could not find stored procedure 'runtime.hostingConfigurations_getHostingConfiguration_v25' and to fix that I set the connection string to find the Hosting database with this PowerShell
Import-ModuleWebSites
Set-WebSitesConnectionString -ConnectionString "Server=denalidue;User Id=sa;Password=xxxxxx;Initial Catalog=Hosting" -Type Hosting
now Web Sites service completes and then in Management Server I am getting crypto errors (Unexpected
cryptographic
exception
occurred) even when I run the simple PowerShell:
Get-WebSitesServer
-ServerType
Controller

Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

Hello Gurus
i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
in the event viewer of the host:
error id 21502
'Virtual Machine xyz' failed to start.
'xyz' failed to start. (Virtual machine ID number)
'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
number)
'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
number).
error id 1069
Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
appreciate your help
Ashraf

Dear All,
Subject : Need to create a file cluster
in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
Currently I am using Qlogic HBA (HP
81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
Unable to create vPort using Microsoft
Hyper-V (Win 2012 R2) & secondly using QConverge
Console utility.
When trying to create Microsoft
Hyper-V (Win 2012 R2), I received the below error.
Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup.
Currently I am using the following latest version of Qlogic Firmware & Drivers...
HBA - Running Firmware Version: 7.00.02
HBA - Driver Version: STOR Miniport 9.1.11.24
If any body the same issue, Please could you update me as earliest.
Regards,
Mirza

Event ID 7000 Diagnostic Service Host failed to start. Privilege in service requiring to function doesn't exist in service account configuration.

Similar Messages

Maybe you are looking for