Event ID 8313

Recently I have noticed that the following error log shows up on WFEs event viewer -
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Looking at similar other issues, I figured that the app server is trying to use (a possibly corrupt??) search service (Search Query and Site Settings Service) on an Index server as an endpoint. However, based on everything I've read, it looks
like Search Query and Site Settings Service shouldn't be turned on the Index Server. How to safely stop (is just clicking stop??) this service and prevent this error from showing up??
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 5424
AppDomain Name: ....
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:895d7e973b764149a48a9f222870b521#
authority=urn:uuid:b04daabaa9c749fba89101ad74435f30&authority=https://APPSERVER:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:1
Affected Endpoint:
http://INDEXSERVER:32843/895d7e973b764149a48a9f222870d251/SearchService.svc

Hi VKM91,
To fix this error, I suggest you do as the followings:
1.Central Administration -> Manage Service Applications -> Search Service Application
2.Check your Search topology to see if the query component is running on that server.
3.Go to Manage Services on Server and check if the service is running.
4.Stop / Restart the service as necessary.
Here is a detailed article for your reference:
http://www.mysharepointadventures.com/2012/03/event-8313-topology-load-balancer-endpointfailure-searchservice-svc/
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Similar Messages

Event ID 8313 : Endpoint failure Search not working

We have created a multi-server farm consist of 2 app servers dedicated for Search Service, in which all search components are running (except admin only in one server).
However we are getting error when do a search from search center or if you click on "Setup My Sites" from User Profile Application. I have checked the Event viewer, returns the error given below,
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: w3wp
Process ID: 5052
AppDomain Name: /LM/W3SVC/629163125/ROOT-1-130570758328305301
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:688df533311742c39ed58c3987f33d8c#authority=urn:uuid:c0f04a37dbe143fa9c5f99788e69948d&authority=https://APPSERVER01:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:1
Affected Endpoint:
http://APPSERVER01:32843/688df533311742c39ed58c3987f33d8c/SearchService.svc
Any help would highly appreciated. thanks.

Hi Kannan,
Based on the error message, it may be caused by the misconfiguration of the service application.
I recommend to re-create the service applications which are affected and then compare the results.
To configure the Search Service Application in two app servers, please follow the links below:
http://blogs.msdn.com/b/chandru/archive/2013/02/19/sharepoint-2013-configuring-search-service-application-and-topology-using-powershell.aspx
http://www.powershellmagazine.com/2013/04/29/creating-and-configuring-a-sharepoint-2013-search-service-application/
Here are some links about the issue for your references:
http://sharepoint2020.blogspot.kr/2013/10/sharepoint-2013-event-id-8313-failure.html
http://sharepointcherie.blogspot.kr/2013/06/eventid-8313-failure-was-reported-when.html
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Initiall SharePoint Server 2013 setup -- unable to manage new User Profile Service Application

During initial farm setup, creating an initial User Profile Service Application works fine. However, once it's created, I cannot 'manage' it through the Manage Service Applications page in central
admin.
I get a generic error (Sorry, something went wrong / unexpected error) with a correlation ID that doesn't seem to match any ULS log entries. (Yes, I merged logs from all machines in the farm.)
A Windows event log entry says:
A failure was reported when trying to invoke a service application: Endpoint Failure
Also frequent errors in ULS logs: (see below)
UserProfileApplicationNotAvailableException
User Profile Application      Proxy failed to retrieve partitions from User Profile Application: Micro…
SPDistributedCache DataCacheException
I did notice that the file 'ProfileService.svc does not exist in SharePoint's web services app at the URL you see in the error. (below)
I also found it interesting that the event log error shows 1 active endpoint and 3 failed endpoints. I have 2 WFEs and 2 app servers. But I'm only trying to get the user profile service app running on the application
servers. I have deleted and recreated this service app several times under various names (deleted/recreated its app pool as well) and wonder if these other failed endpoints could be orphans from previous instances...
Any thoughts on how I might successfully create this service application? I've already been Binging my head against a wall long enough that I would have been better off reinstalling the entire farm... I may still
do that.
FYI, my farm came from a slipstreamed SP1 install package, and received the July CU after several other things were already configured, including the already-failed UP service application.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:11:54 PM
Event ID:      8313
Task Category:
Topology
Level:         Error
Keywords:
User:          xyz\sp_farm
Computer:      spapp1.xyz.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: w3wp
Process ID: 4284
AppDomain Name: /LM/W3SVC/560632691/ROOT-1-130519915587486075
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:11:54.738080000Z" />
    <EventRecordID>14550</EventRecordID>
    <Correlation ActivityID="{02A1AC9C-1125-6026-E124-A52653003266}" />
    <Execution ProcessID="4284" ThreadID="16072" />
    <Channel>Application</Channel>
    <Computer>spapp1</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">w3wp</Data>
    <Data Name="int2">4284</Data>
    <Data Name="string3">/LM/W3SVC/560632691/ROOT-1-130519915587486075</Data>
    <Data Name="int4">2</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp1:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Date:          8/8/2014 6:51:04 PM
Event ID:      8313
Task Category: Topology
Level:         Error
Keywords:
User:          VANTAGE\sp_farm
Computer:      spapp1.vantage.local
Description:
A failure was reported when trying to invoke a service application: EndpointFailure
Process Name: OWSTIMER
Process ID: 8472
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc
Active Endpoints: 1
Failed Endpoints:3
Affected Endpoint:
http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
    <EventID>8313</EventID>
    <Version>15</Version>
    <Level>2</Level>
    <Task>13</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-08T23:51:04.938901900Z" />
    <EventRecordID>14596</EventRecordID>
    <Correlation />
    <Execution ProcessID="8472" ThreadID="17360" />
    <Channel>Application</Channel>
    <Computer>spapp1.vantage.local</Computer>
    <Security UserID="S-1-5-21-499312637-3451022336-10712144539-44056" />
</System>
<EventData>
    <Data Name="string0">EndpointFailure</Data>
    <Data Name="string1">OWSTIMER</Data>
    <Data Name="int2">8472</Data>
    <Data Name="string3">DefaultDomain</Data>
    <Data Name="int4">1</Data>
    <Data Name="string5">urn:schemas-microsoft-com:sharepoint:service:3f215b603e634a629875945488863f75#authority=urn:uuid:9f338b52a7b049b193d8f8dc514fdadd&authority=https://spapp1:32844/Topology/topology.svc</Data>
    <Data Name="int6">1</Data>
    <Data Name="int7">3</Data>
    <Data Name="string8">http://spapp2:32843/3f215b603e634a629875945488863f75/ProfileService.svc</Data>
</EventData>
</Event>
20:22:31.94 SharePoint Portal Server User Profiles cm6y High
User Profile Application Proxy failed to retrieve partitions from User Profile Application: Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext)
20:22:38.16 SharePoint Portal Server User Profiles d22b High
Failure retrieving application ID for User Profile Application Proxy 'User Profile Service Application': Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: UserProfileApplicationNotAvailableException_Logging
:: UserProfileApplicationProxy.ApplicationProperties ProfilePropertyCache does not have 6cd1c1f0-5874-4f8e-9c0a-ed1aff342048     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_AppID()
20:22:44.25 SharePoint Foundation DistributedCache ah24v High
[Forced due to logging gap, cached @ 08/08/2014 20:22:38.16, Original Level: Verbose] DistributedCacheClient TransportProperties- ChannelInitializationTimeout '{0}', ConnectionBufferSize '{1}',
MaxBufferPoolSize '{2}', MaxBufferSize '{3}', MaxOutputDelay '{4}',ReceiveTimeout '{5}'.
20:22:55.26 SharePoint Foundation DistributedCache ah24w Unexpected
Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache' - Exception 'Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRCA0017>:SubStatus<ES0006>:There
is a temporary failure. Please retry later. (One or more specified cache servers are unavailable, which could be caused by busy network or servers. For on-premises cache clusters, also verify the following conditions. Ensure that security permission has been
granted for this client account, and check that the AppFabric Caching Service is allowed through the firewall on all cache hosts. Also the MaxBufferSize on the server must be greater than or equal to the serialized object size sent from the client.). Additional
Information : The client was trying to com...

Thanks for the suggestion. I performed the service restarts, and then an iisreset an the two web servers, and the application server that does not run the services. Finally, I ran iisreset on the application server that does run the services.
After performing those steps, I still cannot manage the user profile service application.
ULS log at the time of the attempt contains User Profile Application Proxy errors (in my original post) and am also noticing the following error:
08:15:21.17 SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException:
This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.     at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e)     at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean
includeStag...

Training and Event Management - report on list of cancelled courses

Hi All,
Is there any standard report available to get the list of cancelled courses (be it business event grp , type or business event) Would appreciate your inputs on this.
Kind regards
Sathya

S_AHR_61016216 - Cancellations per Attendee , i think there is no standard report for cencelation of business events, type and group.
for cancellations per attendee reports is available in the system.
good luck
Devi

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

Event List view in iCal?

I would love to have an Event List view in iCal like I do on the calendar on my iPhone. Is there such a thing? The particular reason for wanting it (this time) is that one of the calendars in the ON MY MAC list has a number in a oval to the right.
I believe this is trying to tell me that there is a new event that I need to do something about. Problem is, I don't know where to find it.

ecernek,
There is no event list option on iCal like the one on the iPhone.
That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

Can I show a color bar instead of a color bullet in iCal Monthly view for all my events in all calendars?

In the Monthly view of iCal the only events that show a color bar in the event is the Birthday Calendar. All other events in all my other calendars only show a color bullet next to the event (unless I click on that event which then shows as a color bar). I would like to know if it is possible for all the calendar events to have a color bar in the monthly view instead of just that tiny color bullet.

Greetings Judith,
Before making any attempts at deleting calendar data, backup what you have just in case:
Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
iCal has an automated function located in iCal > Preferences > Advanced > Delete events "X" days after they have passed. By typing in a value for days you can tell iCal to delete all events before that time frame.
Example:
Today is 4-16-2012.
If I wanted to delete all events prior to 1 year ago (4-16-2011) I would type in "365" for the number of days.
Once you type in the number of days you want kept in iCal, close the preferences and then quit iCal.
Re-open iCal and check to see if the events are gone. If not you may want to leave it open for several minutes and then quit again.
Once the events are removed go back to iCal > Preferences > Advanced > Delete events "X" days after they have passed and make sure the check mark is removed to prevent future deletion.
Hope that helps.

Can you show at a glance which event images are in albums?

Say I had an event containing multiple similar but different images, is there a way to show in the grid view for example which images have already been used in one or more albums?
Would be handy to be able to select a 'show list of albums containing this image'dialogue box. I guess you could hide images you've used but that wouldn't work automatically, nor would any other tagging/rating.
Another approach would be to make albums containing everything in a given event, then move the images out of that album once used, just seems fiddly to me.
AC

AC
Would be handy to be able to select a 'show list of albums containing this image'dialogue box.
Yes it would and many people have suggested tit. Add your voice to the chorus at iPhoto Menu -> Provide Apple Feedback.
A workaround - and it's no better - is to go to an album and select al, then give all those pics a keyword. Then in grid view you can see which pics have the keyword. (View -> Keywords)
Regards
TD

Unable to capture startup and shutdown event of Photoshop in automation Plugin.

Hi,
I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
I am unable to detect the cause of the problem. Can someone please giude me??
Thanks in advance.

Hi Tom,
Thanks for the suggestion.
Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
Any other thing that I need to do to make it work?
Thanks

Unable to capture button event in pageLayout Controller

Hi Guys,
I have the following layout
pageLayout
pageLayoutCO (controller)
----header (Region)
----------messageComponentLayout (Region)
-----------------MessageLovInpurt
-----------------MessageChoice(Item)
-----------------MessageTextInput
-----------------MessageLayout
----------HideShow (Region)
-----------------MessageLovInpurt(Item)
-----------------MessageChoice(Item)
-----------------MessageTextInput(Item)
-----------MessageComponentLayout (Region)
-----------------MessageLayout
------------------------SubmitButton(ID:SearchBtn)
------------------------SubmitButton(ID:ClearBtn, fires partial action named clear)
-----------header(Region)
I am not able to capture the event fired by the button ClearBtn in the controller of the pagelayout.....
The two methods I used as follows aren't worked:
if ("clear".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
if (pageContext.getParameter("ClearBtn") != null) {
what should i do in order to capture the button event in the pageLayout Controller
Thanks in advance
Mandy
Edited by: user8898100 on 2011-8-2 上午7:49

Mandy,
Its really strange that its not able to caputure the event in CO.
Below is the way in which we handle to Submit action at CO level.
/Check whether ClearBtn is same in case too.
if(pageContext.getParameter("ClearBtn")!=null){
System.out.println("Inside the Clear Btn Action");
Regards,
Gyan

SAP event not triggering in B1if

Hi,
Facing an issue when creating JE in one company on trigger of this b1if scenario gets activated and create JE in another company,earlier it was working fine, after upgrading Integration Component from SAP 9.0 PL12 to SAP 9.0 PL15 issue occurred.
In message log in b1if can't see any log(Success,Failure,Processing,Filtered).
Any help would be appreciated.
Thanks

Hi,
Please check on event sender setup.
Have you click on "Create Complete Journal Entry Events" on 4th step of Event sender in Event Filter option ?
Thanks,
Tushar

When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard and not iSync.

I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Get All Values From NewForm.aspx using Event Receiver Item Adding

HI All,
I have conditions to check before the insertion of "Calendar Event".For this I am using Item Adding Event Receiver ,When Click on Save button I need to get all the values of Items filled in NewForm.aspx and check
the condition,If condition satisfies make them insert else show alert info as"Not Valid",Below is code and error message
public override void ItemAdding(SPItemEventProperties properties)
base.ItemAdding(properties);
string StartTime = properties.AfterProperties["Start Time"].ToString();
string EndTime = properties.AfterProperties["End Time"].ToString();
Error
Object reference not set to an instance of an object.
Use the New "Keyword to create an object instance
Can any one help me how can I do it.
Thanks,
Quality Communication Provides
Quality Work.
http://siddiq-sharepoint2010.blogspot.in/
Siddiqali Mohammad .

Hi,
Have you tried with the code snippet as mentioned below
string EndDate = Convert.ToString(properties.AfterProperties["EndDate"]);
string StartDate = Convert.ToString(properties.AfterProperties["EventDate"]);
If my post is helpful - please click on the green arrow to mark it as answer

Problem with flash in events packaged application

Hi,
I´v installed the Events packaged application.
On page 24 you can show some flash-reports. But I get an error: xml loading failed (flow_flash_chart_Rxxxxx).
What can be the reason? serverside or desktopside?
Any reaction will be appreciated.
Leo

Try the following
close all browser windows and open Windows Explorer
in the address bar type %appdata%\Adobe
delete the 'Flash Player' folder in there
in the address bar type %appdata%\Macromedia
delete the 'Flash Player' folder in there
Now try again to change any Flash Player settings.

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Event ID 8313

Similar Messages

Maybe you are looking for