Event ID 9112 from source LSDP Service cannot be found

After updating my Lenovo Setting Dependency Package to the latest version, I am seeing this event in my Windows 8 application log.
The description for Event ID 9112 from source LSDP Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
I have tried manually installing the latest version (1.2.5.8)
Why am I seeing this issue in the Windows application event log?
Thanks
Barry

Hi,
To further check whether it is KB3011780 that causes this issue, I suggest you uninstall the update, check the issue, reinstall the update, check the issue again.
Regarding to the .Netframework error, we have Microsoft .NET Framework Repair Tool avilable, please use the tool to fix the issue instead of disabling .Netframework.
Microsoft .NET Framework Repair Tool is available
http://support.microsoft.com/kb/2698555
Yolanda Zhu
TechNet Community Support

Similar Messages

The description for Event ID 8306 from source Microsoft-SharePoint Products-SharePoint Foundation cannot be found

hi,
can anyone please help me with the following:
The description for Event ID 8306 from source Microsoft-SharePoint Products-SharePoint Foundation cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair
the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc/actas is too busy.
The publisher has been disabled and its resource is not avaiable. This usually occurs when the publisher is in the process of being uninstalled or upgraded
_________________________________________________________ Fahad Khan

Hi,
Please try the following steps to troubleshoot your issue:
1.
You can try to re-run SharePoint 2010 products configuration wizard to see any problems that still exist.
2.
Go to IIS and see the status of SecurityTokenServiceApplicationPool service, whether it is stopped or not, restart the pool.
3.
Go to manage web application services, review the status of Security Token Service application , try to restart.
4.
In Central Administration>Security>Configure Service Account>Change the service account for the Security Token Service application to some other managed account.
5.
If the issue persists, try the resolution in this blog:
http://blogs.msdn.com/b/sowmyancs/archive/2010/07/16/sharepoint-2010-service-applications-bcs-metadata-access-service-are-not-working.aspx
Let me know the result.
Xue-Mei Chang

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

Click to call 7.0.12.0 on Windows 7 - Webdialer service cannot be found

Hi Guys,
I am trying to get click to call 7 working on Windows 7. I keep getting "Webdialer service cannot be found" message when entering the callmanager IP in Webdialer IP field and save.
I have added the proxy exception https://x.x.x.x:8443 (x.x.x.x is the callmanager IP)
Still it is complaining about web dialer service.
Click to call version : 7.0.12.0
Windows 7 Professional
Callmanager Version: 7.1.5.32900-2
Same click to call version works ok when installed on Windows XP machine. Just incase, I unsiatleld and resinstaleld clicktocall on windows 7 by running as Administrator eventhought he user accoutn I logged in has administrator rights ( As on same machine, cipc tftp server edit option didnt come until I install by ruinning the exe as administrator eventhough I logged in as a user with administrator rights.)
Any help would be appreciated.
thanks in advance,
Sivaji

Can you access the webdialer URL from the same PC using the browser?
If you can, then i've seen issues with clicktocall (the executable) being blocked on the PC by agressive personal firewall/security software, like Symantec Endpoint Protection. Something to do with the executable trying to bind or create a port or miniport. Try it on a PC on the same subnet but without the security software.
Alternatively, If you can't even access the webdialer URL from that PC then you either have a network connectivity problem between PC and CallManager, or your webdialer service is not activated. Possibly a proxy is getting in the way.
The Webdialer service only needs to be activated and running on one node in the cluster and in general can run on the Publisher.
On my cluster (version 8.6) the webdialer URL is https://x.x.x.x/webdialer/Webdialer - you can find out the URL by looking in "directory" after logging into CCMUser and looking at the URL's directory where you can click on extensions. I think it has changed over major releases.

Polycom CX 600 - Certificate web service cannot be found

Hi All,
I know, there are some same issues in the forum, bot those are not helpful for me. My problem is the same, via network cable (using just DHCP) the Polycom CX 600 Lync Phone are not able to sign in (however 1 month ago it was), returning the error message:
'Certificate web service cannot be found.'
I've double checked the DHCP options and all of them are OK! We are not using Windows DHCP, but the options are right, the 43 option containing the proper hexa value, the sub-options are also valid. From the DHCP log I can verify that the device got the
options, but the phone still not able to sign in.
From the browser I cannot open the device, by it's IP, just with FTP:\\'IP'. There I could find a .clg1 log file, but it not containing useful information for me.
This is the link of the log file: http://speedy.sh/XAgMT/system.clg1
If I run the DHCPUtil.exe -emulateclient on my workstation, I got the following:
Starting Discovery ...
Result: Failure = -2147014848
Or... sometimes it has a result:
Starting Discovery ...
Sending Packet (Size: 288, Network Adapter: 57.56.69.138, Attempt Type: Broadcas
t + Unicast)
--Begin Packet--
DHCP: INFORM (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = E0DB55DE###--End Packet--
Received Packet
Sender:57.20.120.85:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.131
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.85
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.85:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.130
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.85
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.131
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Received Packet
Sender:57.20.120.100:67, Size:408
--Begin Packet--
DHCP: ACK (xid=5C1E8177)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 1545503095
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = 57.56.69.138
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 57.56.69.130
DHCP: Client HW Address (chaddr) = E0DB55DE8993
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) 57.20.120.100
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 18) enc:0 lync2013.dlh.de (00086C79
6E633230313303646C6802646500)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 130) ☺♀MS-UC-Client☻♣https♥☼lync201
3.dlh☻E6465040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536
572766963652E737663] (010C4D532D55432D436C69656E7402056874747073030F6C796E633230
31332E646C6802453634363530343033333433343333303532353246343336353732373435303732
36463736324634333635373237343530373236463736363937333639364636453639364536373533
36353732373636393633363532453733373636335D)
DHCP: End of this option field
--End Packet--
Result: Failure = 1
I don't know what is that Failure = 1
Has anybody an idea???
Many thanks,
Tamás

Hi,
The DHCP options are good.
Finally, I was able to run the test-csphonebootsrap cmdlet, and I got the following error:
Result : Failure
Latency : 00:00:01.2179659
Error Message : No response received for getting root certificate chain.
Inner Exception:The remote server returned an unexpected respon
se: (417) Expectation Failed.
Inner Exception:The remote server returned an error: (417) Expe
ctation Failed.
Diagnosis :
Inner Diagnosis:Mime-Version : 1.0
X-Squid-Error : ERR_INVALID_REQ 0
Vary : Accept-Language
Content-Language : en
X-Cache : MISS from proxy.lsy.bud.dlh.de
X-Cache-Lookup : NONE from proxy.lsy.bud.dlh.de:3128
Connection : close
Content-Length : 3944
Content-Type : text/html
Date : Thu, 09 Jan 2014 13:24:47 GMT
Server : squid/3.1.10
Via : 1.0 proxy.lsy.bud.dlh.de (squid/3.1.10)
VERBOSE: Workflow
'Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow'
started.
Workflow
'Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow'
completed in '0.0001508' seconds.
Target server Fqdn or web service Url not provided. Will have to do DHCP
Registrar Discovery.
An exception 'No response received for getting root certificate chain.'
occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STPhoneBootstrapWorkflow
execution.
Exception Call Stack: at
Microsoft.Rtc.Admin.Authentication.WebServicesHelper.GetRootCertChains()
at
Microsoft.Rtc.SyntheticTransactions.Activities.GetRootCertChainsActivity.Intern
alExecute(ActivityExecutionContext executionContext)
at
Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Ex
ecute(ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity,
ActivityExecutionContext executionContext)
at
System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRunti
me workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Server stack trace:
at
System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(
HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory,
WebException responseException, ChannelBinding channelBinding)
at
System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChanne
lRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message,
TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean
oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan
timeout)
at
System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessa
ge methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)
at RootCertChainService.GetRootCertChains(GetRootCertChainsRequest request)
at Microsoft.Rtc.Admin.Authentication.WebServicesHelper.GetRootCertChains()
'DHCPDiscover' activity started.
Starting DHCP registrar discovery...
Constructing a DHCP packet.
Adding DHCP option PARAMETER_REQUEST_LIST.
Successfully added DHCP option.
Adding DHCP option VENDOR_CLASS_IDENTIFIER.
Successfully added DHCP option.
Successfully constructed DHCP packet.
Trying to open an udp connection.
Remote IP : 255.255.255.255.
Local IP : 10.150.7.33.
\tCreating a new UDP client.
Udp connection successfully created.
Sending packet.
Remote IP : 255.255.255.255.
Remote Port : 67.
Packet sent successfully.
DHCP discovery message send. Waiting for DHCP servers to respond.
Data received successfully.
Remote IP : 57.20.120.85.
Remote Port : 67.
Response received for the DHCP Discovery message.
Constructing a DHCP packet from received raw data.
Extracting DHCP Options.
Successfully constructed DHCP packet.
Return value for DHCP option : SIP_SERVER.
Found registrar Fqdn : lyncpool.dlh.de.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.1.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.1 - MS-UC-Client.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.2.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.2 - https.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.3.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.3 - lyncpool.dlh.de.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.4.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.4 - 443.
Successfully extracted sub option value.
Searching for DHCP sub option : VENDOR_SPECIFIC_INFORMATION.5.
Return value for DHCP option : VENDOR_SPECIFIC_INFORMATION.
Found DHCP sub option : VENDOR_SPECIFIC_INFORMATION.5 -
/CertProv/CertProvisioningService.svc.
Successfully extracted sub option value.
Found web service Url :
https://lyncpool.dlh.de:443/CertProv/CertProvisioningService.svc.
Disconnecting.
DHCP registrar discovery activity completed successfully.
'DHCPDiscover' activity completed in '1.2179659' seconds.
'GetRootCertChains' activity started.
Trying to download a certificate chain from web service.
Web Service Url : http://lyncpool.dlh.de/CertProv/CertProvisioningService.svc
Could not download certificate chain from web service.
CHECK:
- Web service Url is valid and the web services are functional.
'UnRegister' activity started.
'UnRegister' activity completed in '3.78E-05' seconds.
VERBOSE: Workflow Instance ID 'a9313cfa-b82c-4bd2-9df6-81acca1bcbbc' completed.
VERBOSE: Workflow run-time (sec): 1.5083016.
It looks like the telephone are not able to download the root CA, but the webservice is available and reachable via port 80 and 443 too.... So, what is the reason? Why the Polycom CX600 is not able to download the root CA??

The BPEL domain "services" cannot be found

I get the following error while invoking a web service.
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary">
<summary>when invoking locally the endpoint 'http://..........', ; nested exception is: ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "services" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</summary>
</part>
<part name="detail">
<detail>ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "services" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</detail>
</part>
</remoteFault>
Anyone with similar issues?

bstn,
here is why - services is reserved within bpel .. (for hw and idm) - can you pls redeploy you service with a different path and see if it works ..
The reason is that optSOAPShortcut set to false, will cause performance loss, as everything (even local process to process calls) will use ws stack instead of in memory..
Nevertheless if this is not the case, I'd really like to see what is the endpoint the ws stack is trying to call to ensure we are not running into the wrong direction..
thx clemens

The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a

Hi All:
I need help!!!
I am using axis2-1.5.1, jdk 1.6, eclipse 3.5, and Axis2_Codegen_Wizard_1.3.0 and windows xp.
I used Axis2_Codegen_Wizard_1.3.0 to generate the client stub and proxy.
I get the following error when I tried to call the web service:
package com.ttdev.ss.client;
import java.rmi.RemoteException;
import com.ttdev.ss.client.SimpleServiceStub.ConcatRequest;
import com.ttdev.ss.client.SimpleServiceStub.ConcatResponse;
public class SimpleClient
     public static void main(String[] args) throws RemoteException
          try
          SimpleServiceStub service = new SimpleServiceStub();
          ConcatRequest request = new ConcatRequest();
          request.setS1("abc");
          request.setS2("123");
          ConcatResponse response = service.concat(request);
          System.out.println(response.getConcatResponse());
          catch(Exception e)
               System.out.println("e.getMessage():"+e.getMessage());
Here is my SimpleService.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="SimpleService" targetNamespace="http://ttdev.com/ss" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://ttdev.com/ss" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<xsd:schema targetNamespace="http://ttdev.com/ss">
<xsd:element name="concatRequest">
<xsd:complexType>
<xsd:sequence>
     <xsd:element name="s1" type="xsd:string"/>
     <xsd:element name="s2" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="concatResponse" type="xsd:string">
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="concatResponse">
<wsdl:part name="parameters" element="tns:concatResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="concatRequest">
<wsdl:part name="parameters" element="tns:concatRequest">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="concat">
<wsdl:input message="tns:concatRequest">
</wsdl:input>
<wsdl:output message="tns:concatResponse">
</wsdl:output>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSOAP" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="concat">
<soap:operation soapAction="http://ttdev.com/ss/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServiceSOAP" binding="tns:SimpleServiceSOAP">
<soap:address location="http://localhost:8080/axis2/services/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the dos-prompt, I get the following error message:
[INFO] Listening on port 8080
[ERROR] The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a
xis2/services/
org.apache.axis2.AxisFault: The service cannot be found for the endpoint referen
ce (EPR) 127.0.0.1/axis2/services/
at org.apache.axis2.engine.DispatchPhase.checkPostConditions(DispatchPha
se.java:65)
at org.apache.axis2.engine.Phase.invoke(Phase.java:334)
at org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:251)
at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:160)
at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostReq
uest(HTTPTransportUtils.java:167)
at org.apache.axis2.transport.http.HTTPWorker.service(HTTPWorker.java:26
6)
at org.apache.axis2.transport.http.server.AxisHttpService.doService(Axis
HttpService.java:281)
at org.apache.axis2.transport.http.server.AxisHttpService.handleRequest(
AxisHttpService.java:187)
at org.apache.axis2.transport.http.server.HttpServiceProcessor.run(HttpS
erviceProcessor.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:619)
Thank you for your help!!!
Yours,
John.

I had the same issue and managed to fix it.
I am using tomcat and had a filter configured for AxisServlet to open a hibernate Session. Somehow (I did not figure it out yet) this filter afects the way the AxisServlet resolves the EPR.
My fix was - remove the filter. It worked. Now I am trying to figure out why.
If you have any clues, please drop a line.

Org.apache.axis2.AxisFault: The service cannot be found for the endpoint

Hi Team,
I'm getting following error while runnig WebServices
[ERROR] The service cannot be found for the endpoint reference (EPR) /TestServices/services
org.apache.axis2.AxisFault: The service cannot be found for the endpoint reference (EPR) /TestServices/services
Please guide me where i went wrong
Thanks in Advance
Ravi

I am also facing the same problem. can any body help us?
Thanks
jaya

After installing iPlanet Web Server v6 SP2, there is error message: https-admserv60 cannot be found??

After installing iPlanet Web Server v6 SP2 on Windows 2000 SP2, error message in the event log shows up. "The description for Event ID ( 0 ) in Source ( https-admserv60 ) cannot be found."
"The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: startup: server started successfully."
The iPlanet 6SP2 seems to work fine but these error message occur after rebooting the server. There is actually 2 messaages: one for the admin server and the
other for the actual web server instance. Both state
'server started successfully' but these messages still
appear.
Any ideas how to correct this?
Thanks,
JD Trinaca

this will occur, as the 6.x servers do not use the lodctrl to place the perf monitor messages in the registry...as long as the server starts & runs ok, you can ignore these particular errors

My Application logs "The description of Event ID 0 from MyApp cannot be found" event to application event log

Hello,
This is regarding the following event logged by my application (MyApp.exe) to the application event log:
Log Name:      Application
Source:        MyApp
Date:          03/2/2015 12:00:09 PM
Event ID:      0
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Rajesh
Description:
The description for Event ID 0 from source MyApp cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
I have confirmed that the key "EventMessageFile" in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application\MyApp correctly specifies the "dll" responsible for displaying events.
I would appreciate suggestions on the above.
Best Regards,
Rajesh K Singh

Hi All,
can you provide solution on below error.
The description for Event ID 17052 from source MSSQLSERVER cannot be found
Severity: 16 Error:0, OS: 0 [Microsoft][SQL Server Native Client 10.0]Unable to complete login process due to delay in opening server connection
Thanks in advance.
Vijay
Check below thread, information is not complete to actually comment what were you doing when you got this message.refer errorlog for more details
http://social.msdn.microsoft.com/Forums/en-US/9a41ced9-19ad-4c4f-83ac-7e877b699a8f/login-failure-error-in-event-log-daily
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Event ID (16640) in source (SMARTS) cannot be found

the decription for Event ID (16640) in source (SMARTS) cannot be found. The local computer
may not have the nescessary registry information or message DLL files to display the message
from a remote computer.You may able to use the /AUXSOURCE = Flag to retrieve this description
The following information is a part of event [10-oct-2011 08:02:03 AM+419ms] t@9316AD_CallbackICMP #1
ICMP-E-ESENDTO- cannot send data to 172.19.14.3
SYS-zWSAEINTR-Interrupted system call
I am getting above error message on my ciscoworks server.
For 5 min the server became unreachable and then it come up automatically.when i checked the events I found the above one, also at the same time my Cisco works daemon were restarted automatically,
CW-3.2 DFM -3.2
Please help

Hi All,
can you provide solution on below error.
The description for Event ID 17052 from source MSSQLSERVER cannot be found
Severity: 16 Error:0, OS: 0 [Microsoft][SQL Server Native Client 10.0]Unable to complete login process due to delay in opening server connection
Thanks in advance.
Vijay
Check below thread, information is not complete to actually comment what were you doing when you got this message.refer errorlog for more details
http://social.msdn.microsoft.com/Forums/en-US/9a41ced9-19ad-4c4f-83ac-7e877b699a8f/login-failure-error-in-event-log-daily
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

HT5661 I would like to erase my iPhone from my iCloud accout, but my iPhone cannot be found. iCloud is searching for a long time, what did I do wrong?

I sold my iPhone last week, however I forgot to delete it from iCloud. I restored my phone before shipping it. Now I'm trying to delete it from iCloud, but it cannot be found.
Thanks for the help.

You don't need to find, just remove it. That feature usually shows up next to phone's name like a little crosshair, if you hover with your mouse cursor. Sometimes phone needs to be turned off for that, but it sounds like it is already wiped and should work.

ColdFusion 11 Application Server 3284 | ColdFusion 11 Application Server cannot be found...

Trying to roll this server into production but keep having errors popup on Event Viewer:
After dealing with the issue of not being able to restart the CF service and applying the hf1100-3776060.jar hotfix - I continue to receive the following error
====================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
3284
the message resource is present but the message is not found in the string/message table
=====================
Any help will be greatly appreciated!
Thank you!

Hi Car, there were no errors registered by ColdFusion under the CF11\cfusion\logs coldfusion-error log but the error below continues to show during CF Application stop-start services.
Anit Kumar Panda - followed the steps and was able to restart all services. during that time i received the following error on eventvwr.msc
======================
The description for Event ID 3 from source ColdFusion 11 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 11 Application Server
4140
the message resource is present but the message is not found in the string/message table
======================
Thank you, very much, for all your assistance!

Why are we getting 'Coldfusion 10 application server cannot be found'?

Our ColdFusion 10 Application Server would not start. It was running fine since server inception back in July until I got back to the office from vacation yesterday. Looking at the Event Viewer 'application' log, it's showing the following message:
"The description for Event ID 259 from source ColdFusion 10 Application Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event: ColdFusion 10 Application Server."
I thought that the issue was caused by Hotfix 14. So I manually removed the hotfix and rebooted the server couple of times. However, ColdFusion still wouldn't start. Has anyone came across this issue before? I look forward to your response. Thanks.
Best regards,
Chung Lee

Hello Carl V.,
Thank you for you reply. I digged through the coldfusion-error.log and the exception.log and came across errors that were last generated on 12/17/2014. On the exception.log, it's showing the following:
"Error","Thread-17","12/17/14","15:15:54",,"Could not initialize class java.awt.Toolkit"
java.lang.NoClassDefFoundError: Could not initialize class java.awt.Toolkit
    at java.awt.Component.<clinit>(Unknown Source)
    at coldfusion.document.JPedalFontRegistry.init(JPedalFontRegistry.java:40)
    at coldfusion.document.DocumentServiceImpl.initializeDocumentService(DocumentServiceImpl.jav a:211)
    at coldfusion.document.DocumentServiceImpl.access$000(DocumentServiceImpl.java:52)
    at coldfusion.document.DocumentServiceImpl$1.run(DocumentServiceImpl.java:180)
"Error","localhost-startStop-1","12/17/14","15:15:55",,"Unable to initialise JAI service: java.lang.NoClassDefFoundError: java.awt.Toolkit"
java.lang.NoClassDefFoundError: java.awt.Toolkit
    at sun.awt.AppContext$2.run(Unknown Source)
    at sun.awt.AppContext$2.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.AppContext.initMainAppContext(Unknown Source)
    at sun.awt.AppContext.access$200(Unknown Source)
    at sun.awt.AppContext$3.run(Unknown Source)
    at sun.awt.AppContext$3.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.AppContext.getAppContext(Unknown Source)
    at javax.imageio.spi.IIORegistry.getDefaultInstance(Unknown Source)
    at coldfusion.server.CFService.setupImageProviders(CFService.java:707)
    at coldfusion.server.CFService.start(CFService.java:690)
    at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:110)
    at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:86)
    at javax.servlet.GenericServlet.init(GenericServlet.java:158)
    at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
    at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
    at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
    at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
    at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1559)
    at org.apache.catalina.core.ContainerBase$StartChild.call(ContainerBase.java:1549)
    at java.util.concurrent.FutureTask.run(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

SBO Mailer Error - The specified resource type cannot be found in the image file

Hi Experts,
I have created an alert in SBO and selected email and internal option for same. I get internal message however email is not getting delivered, I checked the Event Viewer of Windows and below error is shown for SBOMail.
The description for Event ID 62 from source SBOMail cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Failed to mark records error [-1]
The specified resource type cannot be found in the image file
I can send email from sbo for other documents but the alert is not delivering email.
Please advise.
Thanks
Deepak

Hi Deepak..
Check with these threads...
http://scn.sap.com/thread/966957
http://scn.sap.com/thread/1295818
SBOMail Application log error
SBOMail error in event log
Hope Helpful
Regards
Kennedy

Event ID 9112 from source LSDP Service cannot be found

Similar Messages

Maybe you are looking for