Event ID's 4005, 50 and 56 on Server 2008 R2 RDS

My event log's are being hammered with Event 4005 The Windows logon process has unexpectedly terminated,
Event 50 The Terminal Server security layer detected an error in the protocol stream and has disconnected the client
and Event 56 The RDP protocol component <component> detected an error in the protocol stream and has disconnected the client.
I have followed the suggestions in
http://technet.microsoft.com/en-us/library/cc734097(v=ws.10).aspx and searched on this without finding a solution to make the events go away.
I also tried following this suggestion to remove two Windows Updates (even though I have Win 2008 Standard R2 and not SBS)
http://social.technet.microsoft.com/Forums/en-US/dd7157b8-8ecc-4a13-88ad-f4ca0d3b3249/error-the-windows-logon-process-has-unexpectedly-terminated?forum=smallbusinessserver
I have cross referenced the dates & times of these events with a login audit file I keep and hoping to find a pattern related to specific users but no luck.
Before I open a paid support ticket, I just want to find out if there is any common thread to these Event ID's.
Can these be caused by:
1) an RDP worm/malware?
2) Macintosh RDP clients?
3) Disconnected session being logged off after 2 hrs by policy?

Hi,
The error which you are facing, might occurs due to some network related issue or some RDP\disconnection related issue. You can try to configure TCP offload chimney, disable RSS Disable NetDMA for Eevent ID 50 & 56. For Event ID 4005, as you have provided
the link for article. Did you check whether registry is corrupted? Windows logon service is running.
Please check below article for more information:
1. How
to troubleshoot “The Terminal Server security layer detected an error in the protocol stream and has disconnected the client. Client IP:” and “The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client”err
2. How to resolve the issue “Remote Desktop Disconnected” or
“Unable to Connect to Remote Desktop (Terminal Server)”
Hope it helps!
Thanks,
Dharmesh

Similar Messages

Removing Server 2000 DC and adding Server 2008 DC.

Removing Server 2000 DC and adding Server 2008 DC.
From: Server 2000 Sp4 (not leaving in place, no plans to demote)
To: Server 2008 Sp2 (will be a single DC and hold Global Catalog)
Single forest domain. Only one DC.
Problem: The old server 2000 is still a primary DC and the new server 2008 is not taking over.
Completed the following tasks:
NIC binding (connected NIC at top of list on new server)
New server is also DNS server. This role is working and it points to itself 127.0.0.1 and clients have been moved to use the new server for DNS, they are working.
New server has some shared folders. Clients are connected and this is working until we remove the old server, then they cannot authenticate to the mapped drive.
Both servers show the role of Domain Controller
Adprep /forestprep and /domainprep and /domainprep /gpprep were run on the server 2000 (as it was the existing DC) with a successful message. (not sure if enough time was allowed for replication)
All five Flexible Single Master Operations (FSMO) roles were transferred using GUI.
Schema Master, Domain naming master, Infrastructure master, RID master, PDC Emulator.
And have been verified. All roles transferred and the new server 2008 and new server is also the global catalog.
Then to verify new server is handling the role we unplugged the Ethernet cable from the Old server 2000, then went to client stations and re-started them and they would not find the new DC and connect to it.
On the new server when we opened active directory users and computers the domain did not appear.
Verified in DNS manager the A record and reverse pointer were correct.
For some reason the new server is looking to the old server. Even though all roles are moved over and DNS appears to be setup correctly it won’t exist independently.
What’s missing?
If something was missed or performed wrong, do we have to remove the roles and start from scratch? Or can we re-run adprep and walk the steps again leaving all as-is?

Hello,
as first step please post an unedited ipconfig /all from the old and new DC/DNS server and one problem client.
It seems that your installation from the new DC wen't well and as described in
http://msmvps.com/blogs/mweber/archive/2010/02/06/upgrading-an-active-directory-domain-from-windows-server-2000-to-windows-server-2008-or-windows-server-2008-r2.aspx Just check again yourself.
A DC should NEVER be shutdown or just disconnected from a domain, it MUST be demoted correct, as you ruin into replication errors in the event viewer without that steps and you will never be able to install a additional DC with using the same name.
See the end of my article about removal steps.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Compatability: CR 2008, VS 2005 and SQL Server 2008 on WINDOWS 7

Crystal Reports 2008, Visual Studio 2005 and SQL Server 2008 all play nice together on a VISTA or XP box. But we cannot get a connection when we switch the OS to WIN 7. I tried to get a connection via the report designer. Is this combination of technologies currently supported?
Thanks.

Hi, Jeff;
See the [Platforms|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/00225757-ab5c-2c10-c1a8-fb9f9f0f4ac2] document for CR 2008. You need Service Pack 2 to run on Windows 7.
If you already have SP 2, then what happens when you try to make a connection?
Regards,
Jonathan
Follow us on Twitter u2013 http://twitter.com/SAPCRNetSup

Java for PI 7.1 EHP1 in Windows and SQL Server 2008

Hi Gurus
I try to install PI 7.1 EHP1 in Windows and SQL Server 2008. The questions is :
What version of java is the correct for this installation???
And where i can download it??
Thanks and advance!!!

Hi Aaron,
The version for PI 7.1 is 1.5, instead of the 1.4.2 of 7.0/3.0.
Anyway, for VM settings, you should refer to SAP JVM, which
is used for the PI 7.11.
Hope it helps!
Regards,
Caio Cagnani

HSODBC connectivity between ORACLE 10g and SQL Server 2008 R2

Hi,
I'm getting below error when using the DB link between Oracle (10.2.0.2 which is on Sun Sparc) and MS Sql server 2008 R2.
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source
name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from SCOPEX.WORLD
My Config files:
On Sun Sparc 5.9 where Oracle server is running.
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
Listener.ora file on Windows machine:
TelemetryDB1 =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
SID_LIST_TelemetryDB1 =
(SID_LIST=
(SID_DESC=
(SID_NAME=TelemetryDB1)
(ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
(PROGRAM=hsodbc)
Tnsnames.ora file:
TelemetryDB1 =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.6.48)(PORT=1522))
(CONNECT_DATA=(SID=TelemetryDB1))
(HS=OK)
initTelemetryDB1.ora file under ORACLE_HOME\hs\admin\
HS_FDS_CONNECT_INFO = TelemetryDB1
HS_FDS_TRACE_LEVEL = OFF
We have created DNS with TelemetryDB1.
I'm getting the above error for DB links between Oracle 10.2 and SQL Server 2008 R2. But the same, when configured for MS SQL server 2000 works fine without any issues.
Please advise me to rectify the error. We've been working for the last couple of weeks.
Regards,
Sunil

Sunil,
You don't need an Oracle ODBC driver.
The way it works is that in the gateway init<sid>.ora file, in your case initTelemetryDB1.ora, the parameter HS_FDS_CONNECT_INFO points to a system DSN. This DSN should then be configured to use an ODBC driver to connect to the non-Oracle database. So, in your setup when you want to access the SQL*Server 2008 database then the DSN should use an ODBC driver that can connect to a SQL*Server 2008 database. If you still use the initTelemetryDB1.ora file for the connection then the TelemetryDB1 DSN should be configured to access the SQL*Server 2008 database.
However, there are a couple of problems with your actual setup -
- the configuration you have - 10.2 RDBMS on a Sun machine and HSODBC on Windows - is not supported. HSODBC should only be used from a RDBMS that is in the same ORACLE_HOME as HSODBC.
- 10.2 HSODBC is now desupported and has been replaced by the 11g Database Gateway for ODBC (DG4ODBC) and the configuration you want is supported. That is because unlike HSODBC the DG4ODBC gateway can be installed standalone with a RDBMS being installed.
I recommend that you download and install 11.20.2 DG4ODBC on your Windows machine in a new Oracle_home and access that from the 10.2 RDBMS on Sun - which is a supported configuration. But to do this, you will need to apply either the 10.2.0.4 or 10.2.0.5 patchset to your RDBMS.
There is more information in the following note available on My Oracle Support (MOS) -
Note.1083703.1 Master Note for Oracle Gateway Products
The 11.2.0.2 DG4ODBC can be downloaded from MOS as patch and for the gateways on Windows 32-bit you just need to download -
p10098816_112020_platform_4of6.zip
However, to check the HSODBC ou need to confirm that the DSN used by HSODBC points to a System DSN configured to access SQL*Server 2008.
Have a look at -
Note 109730.1 How to setup generic connectivity (HSODBC) for Windows NT
But remember this is not a supported version or configuration and you should be using Dg4ODBC.
Regards,
Mike

Lms 3.2 and window server 2008 r2 standard

we have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used togetther
Could we upgrade to lms 4.0.1 ? If so, how can we do ?
thank you.
Duyen.

Correct, LMS 3.2 is not supported on Windows 2008 R2. You can upgrade to LMS 4.0 (which is supported on R2), but that is not a free upgrade from LMS 3.x. You can, however, download a free 90-day eval of LMS 4.0 from http://www.cisco.com/go/nmsevals .
It sounds like you need to contact your reseller or account manager to see what they can do. If you just purchased LMS 3.2, you may be able to get a free or discounted upgrade to 4.0.

Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

LMS 3.2 and window server 2008 standard, get error when we try
Khi truy nhập vào menu chức năng:
License Server/Daemon Manager is down. Please check license.log for more information.
access licensing:
Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
Lincense.txt is file log of LMS
Must I have to active window server 2008 first ?
thank you very much ?

Hi ,
--Add the Casuser to the Administrator Group
and then reset the casuser password:
1. Go to CSCOpx\setup\support> and run the following command:
resetCasuser.exe
2. Restart the daemon manager:
Net stop crmdmgtd
Net start crmdmgtd
Let me know how it works
If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
--also screen shot of the below directory :
NMSROOT\etc\license
Thanks
Afroj

Which version of crystal reports can link to Windev 14 and SQL server 2008 applications

I am developing an application with windev 14 and sql server 2008, i would like to know which version of crystal report can i use?

Hi GS,
Move to .NET SDK forum.
I don't know how CR for Visual Studio will integrate into WinDev but to get the installer for VS 2010/2012/2013 go to this page:
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
It's the runtime for CR 2011 or 2013 now.
As for SQL 2008 you need to install the Client tools and when creating reports use the SQLNCLI10.dll as the client DB driver for ODBC or OLE DB.
Don

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
Thanks

Hi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

LC 8.2.1.3/JBoss and SQL Server 2008 R2

Does anyone know if there are any issues with JBoss and SQL Server 2008 r2? I tested connecting to a 2008 sql server in the adobe-ds.xml file and was getting errors in my server log.
The version of JBoss was what came with 8.0. Would I need to update JBoss prior to being able to connect to a 2008 sql server?
Thanks,
John

You are correct. You cannot use 8.2 with 2008 SQL server. You have to upgrade to version 9.
Thank you,
John Daily
Sent via Blackberry
John Daily
Application Systems Analyst III
King Pharmaceuticals, Inc.
Office: 423-989-7165
Cell: 423-956-3911
This E-Mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. This communication may contain material protected by the attorney-client privilege. If you are not the intended recipient or the person responsible for delivering the E-mail to the intended recipient, be advised that you have received this communication in error and that any use, dissemination, forwarding, printing, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately.

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to add the zorin os and domain server 2008

Since Zorin is just a flavour of Ubuntu you should be able to use any of the guides for adding Ubuntu to Active Directory. You can use Samba, Winbind, LikewiseOpen or another package to add it.
Here is some more information: http://askubuntu.com/questions/33592/how-do-i-join-a-windows-active-directory.

how to add the zorin os and domain server 2008
kindly help as
This topic first appeared in the Spiceworks Community

Compatibility forms 6i and Windows Server 2008

Hi,
We want to change our Server from 2003 to Windows Server 2008 64bits.
My question is : is there a compatibility between Oracle forms 6i (our application) and Windows Server 2008 ?
Will the migration be successfull, or will we have some bugs?
Thks for your help.
O.

YES. It worked perfectly for me, you'll have to use oracle 8/8i lite though.

IR6 and Win Server 2008

Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
Thank you in advance for any replies.
Scott

Daniel:
Thank you for the info.
Scott
>>> Daniel Spinatto<[email protected]> 4/28/2009 9:20 AM >>>
Hey there.
At this time, Win2K8 is not a supported platform in IR6. Also, Win2K/SQL2K support were removed from IR6.
Sorry for the delay.
Daniel
>>>
From: Scott Leonard<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 4/17/2009 10:22 AM
Subject: Re: IR6 and Win Server 2008
Daniel:
Thank you for checking into this.
Scott
>>> Daniel Spinatto<[email protected]> 4/16/2009 9:23 AM >>>
While I had not tried to install IR6 on Win2K8, I remember some conversations about support being dropped for SQL2K, and Win2K8 being added in IR6.
However, the website and documentation seem to not reflect those changes.
The Readme for IR6 still mentions that Win2K8 is not supported:
http://www.novell.com/documentation/...5.html#bcxgf96
I will try to confirm that internally and give back and answer.
>>>
From: Scott Leonard<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 4/16/2009 10:43 AM
Subject: IR6 and Win Server 2008
Could someone confirm if Win 2008 Server is supported with the IR6 release? I was on a webinar yesterday about ZESM and I asked the same question and was told that Win 2008 Server was supported. However, I cannot see any such reference when lookiing on Novell's site about ZESM.
Thank you in advance for any replies.
Scott

TopLink 10.1.3.0 and SQL Server 2008 XML datatype

We use TopLink 10.1.3.0 and SQL Server 2008 database. We are trying to map a table with a column of XML datatype, but the 'Direct to XMLType' Mapping is disabled in the Workbench.
Is it possible to map an XML datatype? If so, can you please some guidance on how it can be achieved.
Thanks for the help.
Edited by: amehta5 on Nov 4, 2010 4:09 PM

The Direct to XMLType was desired for the Oracle XMLType. TopLink does not currently support it for SQL Server. You could extend the SQLServerPlatform to add you own support. You must also be able to just map it to a String using a DirectToFieldMapping. If the MW does not let you use the mapping, you can add it in a customizer/amendment method.
FYI: If you are using TopLink 11, you should be using the eclipselink.jar and ideally using JPA, and not using the Mapping Workbench.
James : http://www.eclipselink.org

Event ID's 4005, 50 and 56 on Server 2008 R2 RDS

Similar Messages

Maybe you are looking for