Event IDs 508,509 and 510 (Health Service ESE Store) on SCOM agents

Hi Team,
Many of my SCOM agents are getting the Event IDs 508,509 and 510 on them.
HealthService (2944) Health Service Store: A request to write to the file "C:\Program Files\System Center Operations Manager\Agent\Health Service State\Health Service Store\edb.log" at offset 1485312 (0x000000000016aa00) for 512 (0x00000200)
bytes succeeded, but took an abnormally long time (60 seconds) to be serviced by the OS. This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem.
Because of these events I keep getting "Health Service Heartbeat Failure" Alerts in SCOM whenever these events occur on the agents. After a couple of minutes these alerts get auto resolved and closed.
Has anyone faced a similar issue and let me know what should be done here to solve the issue.
Thanks,
S K Agrawal

I am still not able to resolve the issue. But I came to know that the servers that had this issue were having some issue with the blade servers they all were hosted on and probably this is the issue they got these Event IDs.
I am closing this as a faulty hardware issue on the servers.
Thanks, S K Agrawal

Similar Messages

Task created to stop and start Health service not working.

We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
as well as when i check in Services.msc it is still stopped. Below are the screen shots .
Task created to STOP the health service which is running.
Screen shot of service start task creation which is NOT working
The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
We also tried the recycle health service and chche which is also failing.
Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
We are facing the issue only with Healthservice.

Hi All,
Thank you for all your answers.
@ dktoa -
You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
@Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that group in that site and then enabled the override on Restart
Health Service for a specific group and pointed towards that group then it worked.
Thanks All.

SP2013 Remote Event Receivers for Office365 and Custom Web Service

Hello I'm starting to work with remote event receivers for Office365 and I read that the RERs runs only as Provider-Hosted or Auto-Hosted Apps, so If I wanted to implement for example prevent to the user add items to some list, my question is :
is it needed an account in a platform cloud like Azure(to support .net apps) or have a custom server like IIS(with public IP, dns) in order to hosting my WFC service and to be able to manage the events registered into office365 ? or exist another option
to achieve this goal(prevent to users perform some actions) ? please, can you help me to clarify this ?....

Hi,
The following articles would be helpful:
Deploying SP2013 provider-hosted apps/Remote Event Receivers to Azure Websites (for Office 365 apps)
http://www.sharepointnutsandbolts.com/2013/07/deploying-sp2013-provider-hosted.html
Remote Event Receiver (RER) for Host Web using SharePoint Provider Hosted App in Office 365/SharePoint Online Environment
http://blog.kloud.com.au/2014/03/13/remote-event-receiver-rer-for-host-web-using-sharepoint-provider-hosted-app-in-office-365sharepoint-online-environment/
About Office 365 questions, you can also post it to Office 365 Forum, you will get more help and confirmed answers from there.
http://community.office365.com/en-us/forums/default.aspx
Best Regards
Dennis Guo
TechNet Community Support

Show Running Rules and Monitors for this Health Service task for Unix/Linux agents?

I know there is a way to do this for Windows agents, but is there a way to do this for Unix/Linux agents? When I click on the agent I dont see the option in the task pane. Is there something else that I can use?
If you're going to answer my question with pretentiousness or disrespect, move on to another question. I don't need your help. Thank you

Figure it out after some digging
http://blogs.technet.com/b/daniels_opsmgr_blog/archive/2011/05/14/troubleshooting-mp-fix-wrong-roll-up-monitor-state.aspx
I didnt have the MP imported. Although it works now, not very useful.
EFD
If you're going to answer my question with pretentiousness or disrespect, move on to another question. I don't need your help. Thank you

SCOM 2012 - Event ID 6024 (Launching Restart Health Service. Health Service exceeded Process\Handle Count or Private Bytes threshhold.)

I am getting event ID 6024 (LaunchRestartHealthService.js : Launching Restart Health Service. Health Service exceeded Process\Handle Count or Private Bytes threshhold.) within an interval ranging from 12-17 minutes.
I am using SCOM (2012 SP1 and 2012 R2) on Windows Server (2008 R2 / 2012 / 2012 R2).
This issue is occurring only on agent managed computer (acting as proxy and discover managed objects on other computers setting is enabled) which i am using for monitoring my device. All discovery scripts (powershell) and monitors are targeted on this agent
managed computer.
There are total 80 discoveries and 900 monitors. 55 discoveries and 550 monitors are enabled by default and rest all are disabled.
I am seeing event id 6024 frequently only on agent managed computer. Can anyone help me to resolve this issue.
Thanks,
Mukul

To fix issue 6024, you can follow below steps:
1. Open SCOM console. Go to Monitors -> Agent -> Entity Health -> Performance -> Health Service Performance -> Health Service State.
2. Double click Health Service Handle Count Threshold monitor and go to Overrides page.
3. Click Override -> For a specific object of Class: Agent. Select the affected SCOM agent QMXServer.
4. Check on the parameter Agent Performance Monitor Type - Threshold. Change the default value 2000 to an appropriate value, like 4000. You can check the Health service handle count alert in SCOM console to get the value when the alert is generated. You
can also launch the health explorer against QMXServer to check the value when the monitor state is changed from healthy to critical.
Also you can refer below links
http://blogs.technet.com/b/omx/archive/2013/10/17/health-service-restarts-on-service-manager-servers-with-scom-agents.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Repost (Amazon gift certificate for answer this time) NT Event ids

Where can I find information about the different types of event ids (with numbers and descriptions, source tag, type) for what Oracle writes to the NT event log ?
I offer a $25 gift certificate for the first answer.
Thanks

The note in question reads :
When the Oracle Database Server service fails or fails to start with a pre-
determined error code it calls the ReportEvent function to write an entry to
the event log, Windows NT then passes the parameters to the event-logging
service. This in turn then uses the information to write an EVENTLOGRECORD
structure to the event log. Other errors are reported to the Alert.Log or
related trace files.
When the Windows NT event viewer application starts it uses the OpenEventLog
function to open the event log for an event source. The event viewer can then
use the ReadEventLog function to read event records from the log. ReadEventLog
returns a buffer containing an EVENTLOGRECORD structure and additional
information that describes a logged event.
Oracle Database Server Event Log Messages
=========================================
The following list defines the events that Oracle may put into the NT Event
viewer :
MessageId Severity Description
========= ============= ==================================================
1 Informational This is a test event.
2 Warning Not used: Allocating SGA.
3 Informational Not used: Allocation PGA
4 Informational Initializing SGA for instance %1.
5 Informational Initializing PGA for process %1 in instance %2.
6 Informational Not used:
7 Informational Not used: Initializing Fixed Part
8 Informational Shutdown normal performed on instance %1.
9 Informational Mount shared performed on instance %1.
10 Informational Shared Dismount performed on instance %1.
11 Informational Not used: Process Enable
12 Warning All process in instance %1 stopped
13 Informational Mount exclusive performed on instance %1.
14 Informational Kernel memory being freed for instance %1.
15 Informational Not Used: Oracle process created in instance %1.
16 Warning Instance %1 has been terminated.
17 Informational Not used: Prepare for Mount Shared
18 Informational Not used: Shared Initialized
19 Informational Not used: Shared Check
20 Error Archive process error: %1.
21 Error Could not read file header.
22 Error Invalid file header.
23 Error ReadFile() failure.
24 Error Truncated read.
25 Error WriteFile() failure.
26 Error Truncated write.
27 Error Unable to close file.
28 Error Disk full.
29 Error Unable to allocate memory: malloc().
30 Error Unable to allocate memory: VirtualAlloc().
31 Error Unable to begin another thread.
32 Error Maximum number of ORACLE threads reached.
33 Error Unable to acquire internal semaphore.
34 Informational Audit trail: %1.
The above list is correct up to and including release 8.1.6
Bob
(no payment required!)

Event IDs - what do they mean?

Hi,
From time to time, my Portal Instance stops working and the Event Viewer reports errors with Oracle.iasdb (the Infrastructure database?).
Actually, I get "Information" messages with Event IDs 5 and 34, then "Error" messages with Event ID 31. A typical error message says:
The description for Event ID ( 31 ) in Source ( Oracle.iasdb ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: .
I haven't been able to work out how to get the full message. But surely someone out there can just tell me what the Event IDs 5, 34 and 31 mean. Can you...?
Thanks

So nobody can help at all...?

Health service agent state greyed out.

I am having an issue with the Health Agent state and all of the agents are greyed out. I have checked all the servers and the health service is running on all the agents and the rms. I have restarted the service, deleted the health state folder,
tried to repair the agents and still greyed out. has anyone run into this issue need assistance. scom 2010

Have you tried the following steps.
http://support.microsoft.com/kb/2288515
http://blogs.technet.com/b/kevinholman/archive/2009/10/01/fixing-troubled-agents.aspx
Juke Chou
TechNet Community Support

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

The Health Service could not log on the RunAs account ...event ID 7000 Health Service

Hello everyone,
While using the Web Application Transaction Monitoring to monitor certain websites using specific credentials, this Event 7000 occures on the Watcher Nodes which happen to be also Management Servers.
Here are the details:
The Run As Accounts used are Windows account types.
They have been tested on the websites and are correct.
In the Distribution the More Secure option is selected but no object is present. They are used only for web monitoring.
The Web Application in WATM is using NTLM as the authentication method.
In Monitoring, the web application appears healthy as it is working properly and is being correctly monitored.
In Profiles there is a User Authentication Action Account profile created automatically and has the Run As Account. It is scoped to the management server which is also the watcher node for the web application.
The problem:
On the management server acting as a Watcher Node for the web application, in the OpsMgr log the event ID 7000 is recorded, causing a trigger for a monitor that changes the health of the Management Server to Warning. The monitor should automaticaly resolve
when all Run As Accounts are validated.
Any ideeas on how to resolve this issue without overriding the monitor?
Thanks,
Marius
http://mariusene.wordpress.com/

The SCOM Run As Account wizard does not allow me to specify the basic/simple/digest type account in the form domain\username. I belive the website uses Windows integrated (NTLM) authentication so there is no workaround but to create a Windows
Account type in SCOM.
I just dont want the Health Service to try to validate the run as account locally on the watcher node because its in a different domain.
I suppose in this case a disable of the monitor for those watcher nodes is the only solution?
http://mariusene.wordpress.com/

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

App-V 5 sp2, Citrix user profile manager and Event IDs 19104

Hi,
the environment:
Full Infrastructure, Appv 5 sp2 Client on server 2008r2, xenapp 6.5 and Citrix user profile manager.
We get the event error 19104 on published packages. But not on all users. %APPDATA%\Microsoft\AppV\Client\VFS and %LOCALAPPDATA%\Microsoft\AppV\Client\VFS are excluded per
http://blogs.technet.com/b/appv/archive/2013/10/01/support-tip-event-ids-19104-and-19105-are-logged-when-publishing-and-unpublishing-app-v-5-0-packages.aspx from my test GPO:
List of directories to exclude:
AppData\Local\Microsoft\AppV
AppData\Roaming\Microsoft\AppV\Client
Appdata\local
appdata\locallow
Still some users get app-v Applications, but some that are copies of the ones working does not get the Applications. I have tried to delete the profile. but still no closer to a solution. Anyone got this working?

Thanks Nicke, I should have tried harder to get you to come and work with me in Oslo earlier this year ;)
That thread does point on the Profile managment, and redirection of %appdata% and %localappdata% . Those to folders are not redirected. But when i run Procmon, i can see that a working user creates the c:\users\<username>\appdata\local\temp but non
working does not even try.Non working users also does not query the registry as much as working. Ofcourse this all work in my lab so the settings should be sound. but i cannot find the smoking environment variable or setting that causes it.

Event IDs 136 and 137 0x80000000000000 in System Log on Windows 2008 R2 Server, Exchange 2010 in Cluster

Hi,
I'm having an issue with one of my exchange 2010 Servers. We had a power outage and upon recovery, I cannot start Services Net.Pipe Listener Adapter and Net.Tcp Listener Adapter (And thus cannot Start IIS and provide Exchange Client Services.) This is a
physical server (Not VMWare or Hyper-V)
The System event log has lots of Event 136's and 137s on Ntfs with the keyword - 0x80000000000000 - The General Messages are: The default transaction resource manager on volume C: encountered an error while starting and its metadata was
reset. The data contains the error code.
and
The default transaction resource manager on volume OS encountered a non-retryable error and could not start. The data contains the error code.
XML Output as follows:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="32772">136</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315532</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>C:</Data>
<Binary>1C00040002003000020000008800048000000000060019C000000000000000000000000000000000060019C0</Binary>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">137</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315531</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>OS</Data>
<Binary>1C0004000200300002000000890004C000000000020100C000000000000000000000000000000000020100C0</Binary>
</EventData>
</Event>
When I attempt to start the services - I get the following errors:
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
I have tried the "fsutil resource setautoreset true" fix without success.
Any ideas or direction would be much appreciated. Restoring this server will be extremely difficult.
Thanks!

We can close this question.
From an elevated prompt, I ran 'fsutil resource setautoreset true' and attempted to remove the files with .blf and regtrans-ms file extensions from C:\Windows\System32\config\TxR. but these files were locked by system processes. (They are also
tagged with the hidden file attrib so you may not see them at first)
So, I booted the system with a Windows 2008 R2 Install Disk, selected repair OS and selected the command prompt. I then performed a chkdsk /f c: and selected "Y" to unmount the drive. It made some repairs.
With the system booted from the install disk, and chkdsk executed, the locks were freed and I was able to delete the files from C:\Windows\System32\config\TxR.
Once the system rebooted, the services came back fine and everything was back to normal.

(com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.

Hello,
I am fairly new at Xserve administration, but I got thrown in the fire and i need your help.
My system.log is being hammered with this error:
(com.apple.collabd[15483]): Service setup event to handle failure and will not launch until it fires.
I did my research and it seems to be related to Wiki, but I disabled wiki and restarted and it is still coming up. Any advice would really help
System Version: OS X 10.10.1 (build 14B25)
Server Version: Server 4.0.3 (Build 14S350)

Try deleting the preferences file

How to get the health , performance information and about the services run on devices that have connected to the system center?

Hi All,
I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
I will appreciate your feedback
Thank you

Hi,
You can configure service monitor for the required service on the server
refer below link for how to configure service monitoring
http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
You can use SCOM SDK to connect to the scom server using c# and get required information
http://msdn.microsoft.com/en-us/library/hh329086.aspx
you can find the database in below registry path on management server
HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
Regards
sridhar v

Event IDs 508,509 and 510 (Health Service ESE Store) on SCOM agents

Similar Messages

Maybe you are looking for