Event input doesn't show in iCalendar

This is on the iPhone 5 with IOS 7.

Hi there,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
-Griff W.

Similar Messages

Find Control in Event Structure doesn't show the object when it is not in the frontmost Tab page [Bug Report, LabVIEW 2012]

When you are looking for the control/indicator handled by a case in the Event structure, you can use the contextual menu item "Find Control" (doesn't distinguish between control and indicator, BTW).
The result is that the control/indicator is highlighted on the FP. The problem is, if that control is in a Tab and specifically in a page of that Tab that happens to not be the frontmost, the only thing you'll see is marching ants, but no control:
<=========== the wrong TAB page was shown. LV did not bother to switch to the relevant one....
In other words, "Find Control" in the Event Structure doesn't switch the tab to the owning page. This is contrary to what happens if you right-click, say, the terminal of this control: the FP will switch to the owning Tab page.
I'd call this a bug and this is definitely an annoyance (which most likely has been around since the creation of the Event Structure).

I did not. Is there any better chance for it to be caught there by a NI eye than it is in the LV forum? I though these threads were deemed to gather bugs/features that had been already acknowledged by NI with a CAR number.
I (and others!) wished there was something like this: http://bugs.sun.com/ or http://bugs.python.org/ for LabVIEW...
I am just coming back from a short conference of scientists who quite uninamously ended up with the conclusion that LabVIEW was to be disregarded as a lab development environment because of maintenance problems (which could have been argued for any language in my opinion, although I think they meant spaghetti diagrams are the natural tendency of students who could not care less as they are not going graduate because of their LV skills or lack thereof), but I guess I could have added my grain of salt and added the complete opacity on bug and feature handling by NI.

IPhoto doesn't show thumnails

iPhoto 9.2.3 seems to have lost all my thumnail. all my events and albums have the same thumnail of me and when I open an album or event it doesn't show me the thumnail, it's an empty grey box. I have to click on the grey box to open the picture. What should I do?

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Event in FCPX only shows favorites

After the latest update to 10.0.5 I have one event which will only show favorites even with all clips selected in popup menu. The clips are shown in the event list view with the carot but when you open the carot to see the favorite it is the same. Filmstrip view also only shows favorites. Right clicking and selecting unmark for a favorite does nothing. In other words all that is shown is the favorite. You can not see the whole clip. Also if you add clips to the event they do not appear, however if you select the year so you see all clips in all events for that year they are all there. Also any clips used in the storyline show the handles in the precision editor. Also the date range shown under the event has the correct date range indicating that the clips are all there even if ones added after the update do not appear. I presume the event is corrupted. Is there any way to repair? Is it possible to use one of the old versions shown in the event file "Old Versions" instead of "Current Version"? I did try relink event files but to no effect. Any help appreciated.

Not sure what you mean by library screen shot, but here are two of the clip browser. The first shows the browser with the problem event selected and 3 clips exposing the favorites. Note that both the clip and favorite are the same duration ie the full clip is not shown. The second shot is with the year selected and you can see in clip 0006 which is in the problem event shows both the whole clip and the favorite ie the durations are different. The 0009 clip at the top under June 19, 2012 is a clip added to the problem event but doesn't show when the event is selected.

Touch ignores new events in ical and iTunes doesn't show new calendars

Hi
i just set my Touch (2nd gen 2.1.1) back to the factory settings with a freshly created itunes lib.
My problem was (and still is) that i couldn't sync new events from my macbook to the touch.
i also created a new calendar to ical and checked if naming could be the reason. but the new calendar doesn't show up in the info part of itunes. even if i select replace all calendars on my ipod.
an strange and annoying problem.
cu assetburned

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
Also see
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ical doesn't show line breaks in events anymore?

Just if you haven't yet realized there at apple; iCal in 10.7 doesn't show linebreaks in event text box anymore.
No matter how many breaks you punch in, it shows up in edit mode but once you're done and the evnt is shown in cal, it wraps the text to gether and handles the breaks as spaces.
This is super annoying since I always write my to do list on the days and now it's just a big mess. Also the leather shin has to be one of the ugliest things apple has done in a good while. Just because of this feature I'd like to cancel the update and take my money back.
I rue the day i updated to this alfa level os x.

gif_silver,
The size of the displayed iCal window dictates the size of the displayed text. Altering the Display Resolution is the only other choice to influence the size of the displayed text.
;~)

When I subscribe to a calendar it doesn't show events in my ical even though it is refreshed

When I subscribe to a calendar it doesn't show events in my ical even though it is refreshed & is linked to iCloud - any ideas please?

Is the calendar checked in the list of calendars in the popup menu in the upper left corner?

Running Sync BPEL process doesn't show any HTML form /XML source for input

Hi
I designed,compiled and deployed SYNC BPEL process on to server
but when I opened console and try to run the process, it doesn't show any form for input
Actually it has to take input
Where I am doing wrong...?
Thanks for any help...

Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas

I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow , will there be an updated or this soon?

I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????

Go to settings/notification centre and make sure today vie and calendar day view are both on

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

I was using iMovie yesterday and it was working. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?

I was using iMovie yesterday and it was working perfectly. But today when it started it doesn't show anything in the window on the left. No events, no projects, nothing. It's blank and so is the rest of the screen. Does anyone know what my problem might be?
Where does the imovie.library reside? where do the events and projects reside?

Hi winkydb,
Thanks for visiting Apple Support Communities.
If you do not see the events or clips you were working with previously, first see if you can switch back to the library you were using with this method:
Show or hide the Libraries list
You select libraries and events in the Libraries list.
To show the Libraries list: Click the Show button on the left side of the toolbar.
The default location for iMovie libraries is the Movies folder in your home folder.
You can find this information here:
iMovie (2013): Work with multiple libraries
http://support.apple.com/kb/PH14745
Best Regards,
Jeremy

I have a Sharp Aquos lc-40e67un that and new Apple TV. It doesn't show an input plugged into any HDMI port I try to use.

I have a Sharp Aquos lc-40e67 television that is 5-6 years oldthat and a brand new Apple TV that doesn't show up as an input in any HDMI plug I hook it to. Is my television too old to use the Apple TV technology?

I checked all power connections first, then tried every available HDMI port on the tv. There was nothing showing on the input page that indicated anything new was available.
I'm not sure how to update firmware, inasmuch as I can't get the device onscreen to see any options.
I tried everything I could think of, including scouring the net for information before I posted my question here for help. Perhaps my 6 year old Sharp just predates any ability to use such hardware.

Notification centre doesn't show upcoming calendar events!!!

After upgrading my iPad to iOS 6 my calendar events don't get updated in notification centre. I've set my calendar to show 25 events, now it only shows three even though I have other events coming up tomorrow (all within 24h). For events to show I have to restart the iPad which I find very annoying!!
Anyone else experiencing the same problem?
HELP!

I am having the same exact problem on my iphone 4, only in my case the problem just started a few days ago (it doesn't seem to be related to ios 6). This is the first ASC discussion board I have found specifically dedicated to the topic. Any other posts have just been in passing. It seems either only a handful of people are having this problem or are actually noticing it. I am planning to go to my local Apple Store tomorrow to see if I can get any suggestions, but my fear is that they aren't aware enough of the problem to really have a solution.

Chinese Pinyin input candidate window doesn't Show up

Hi,
Sometimes when I switch to Pinyin (Simplified Chinese) input mode, when I start typing, the candidate window (that lists possible matches) doesn't show up, but if I type space it still produces the first candidate. This problem is not consistent, sometimes it occurs, other times it's fine.
This happens everywhere, in browsers, text editors, etc.
Any idea what the problem might be?
Thanks!
Bob

I don't know what causes the problem. But I know a solution that you may try next time the candidate window disappears.
Click the language symbol in the menu bar, and open "Preferences". Then choose the "Candidate Window" tab, and change the window direction to "Vertical". Close the Preferences window, and try to type something in any text field/box. You'll see the candidate window comes back.

Do I have to use an external clock with a cDAQ-9188 and NI 9401 to read a linear encoder? I'm seeing error message that implies that but the example code doesn't show it.

We can set up a task that works on demand but when we go to continuous sampleing we see Error -200303, which claims an external sample clock source must be specified for this application. However, some of the NI linear encoder example code doesn't show that (uses the cDAQ 80 Mhz clock) and the documentation didn't mention that.

It's mentioned in the 918x user manual:
Unlike analog input, analog output, digital input, and digital output, the cDAQ chassis counters do not have the ability to divide down a timebase to produce an internal counter sample clock. For sample clocked operations, an external signal must be provided to supply a clock source. The source can be any of the following signals:
AI Sample Clock
AI Start Trigger
AI Reference Trigger
AO Sample Clock
DI Sample Clock
DI Start Trigger
DO Sample Clock
CTR n Internal Output
Freq Out
PFI
Change Detection Event
Analog Comparison Event
Assuming you have at least one available counter (there are 4 on the backplane), I would suggest to configure a continuous counter output task and use its internal output as the sample clock. Specify the internal counter using an "_" for example "cDAQ1/_ctr0". The terminal to use for the sample clock source would be for example "/cDAQ1/Ctr0InternalOutput".
Which example uses the 80 MHz timebase as a sample clock? It is far too fast for a sample clock on the 9188 according to the throughput benchmarks (80 MHz * 4 byte samples = 320 MB/s). There is also no direct route between the 80 MHz timebase and the sample clock terminal for the counters--making this route would use a second counter anyway.
Best Regards,
John Passiak

Event input doesn't show in iCalendar

Similar Messages

Maybe you are looking for