Event linkage deactivated after executing the work flow

Hi Experts,
We are facing a problem in the production with Event linkage activation.After Event linkage was activated (ENABLED = u2018Xu2019 in the table SWFDEVENA) and if we execute the workflow then again this linkage is deactivated(Enabled value is cleared).if we activate the linkage and execute the work flow again after work flow exectution event linkage will be deactivated.Could you please give the solution if any one face this issue.
Thanks and Regards,
venkat

Hi Rickk baker,
Thanks for your answer.Now my issue was resoved .This is because of some mandatory work flow container parameter value is missed in the programme.This was traced throgh event trace(swel and swels)
Thanks and Regards,
Venkat Marisetti

Similar Messages

I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

You know that you have to connect the iPad to your PC with the cable that came with it - and then iTunes should start automatically and it will guide you through the set up process?
If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again.

IDOC event linkage deactivated automatically

HI All,
We are facing an issue in Production. IDOC event linkage deactivated automatically when we execute one custom transaction.
Below is the log from Workflow trace SWEL transaction.
IDOC PROCESSSTATEREACHED 10.11.2010 09:25:43 TS30200090 @5C\QFeedback after error@ SWW_WI_CREATE_VIA_EVENT
IDOC PROCESSSTATEREACHED 10.11.2010 09:25:46 TS30200090 @5C@ Deactivated
Could you please let me know what is the actual issue.
Edited by: Phanindra Annaparthi on Nov 10, 2010 8:10 AM
Edited by: Phanindra Annaparthi on Nov 10, 2010 8:12 AM

Hello,
Check the event log (SWEL) for the actual error. Could be a missing mandatory parameter.
regards
Rick Bakker
hanabi technology

Button on toolbar after executing the report i.e. after result display

Hi, after executing the report result is being displayed.Now at this stage I want a button on the application toolbar clicking on which will allow a perform to get triggered.
I tried in following manner:
SELECTION-SCREEN: FUNCTION KEY 1.
*INITIALIZATION.
TABLES: SSCRFIELDS.
*MOVE icon_mail TO sscrfields-functxt_01.
*form SEND_EMAIL .
IF sy-ucomm = 'FC01'.
     PERFORM SEND_MAIL_ASSET_STATUS.
ENDIF.
But it's not ok.The above way is not working.
Please note: I want button on toolbar only after executing the report i.e. after result display.
How can I do this?
Kindly guide.
Best regards.

hi
if you are using alv than just pass 3 values to function call
     I_CALLBACK_PROGRAM                = SY-REPID   " program name
     I_CALLBACK_PF_STATUS_SET          = 'STATUS' "PF-STATUS
     I_CALLBACK_USER_COMMAND           = 'UCOMMAND' " subroutine name
and check the value of UCOMM in subroutine

Urgent - How to get a pop up after executing a work item?

Hi Gurus,
I am working on a PO Approval workflow which is designed to approve multilevel POs depending upon its amount.
Now the requirement is that I need to provide a pop up with list of second level approvers to the user immediately when the user executes the work item of first level approval in his/her SAP Inbox.
Waiting for responses ASAP. Let me know if scenario needs to be clarified in more depth.

Hi Shaurya
You can create a method to send a second workitem to the agent with a list of agents for the second level, and pass the selection back to your workflow container. Set the new task as "Advance with Dialog" and you should be fine.
Alternately you could set your new method as a secondary method AFTER workitem execution call, but don't forget to check the result of the first approval so the popup is only involed if they have approved the first step.
Regards

Could you explain the work flow logic in dispute management

Hello,
Could any one explain the the work flow logic in dispute management .
When will the first work flow initiate and who will recive the first notification and what are the action he/she usually perform. How it trigger to next level and what is the events consider for the next work flow trigger.
If some one could share a real work flow example in line with Dispute management will be great...
regards
Sibichan

Dispute management workflow will help to automate business process.
When some action or information is expected form individual or department then
Workflow can be triggered on editing some field in dispute case and workitem is send
to individual or group, So that they can respond to it.
We can use function email notifications to speed up the process.
Based on organizational needs triggering events can vary.
Regards,
Raju

Auto Drag-and-Drop after execute the exteral program

I execute a program and provide the pathname.
The external program support Drag-and-Drop and also Open files by clicking Menu.
I have to open file after executing the program.
Is it possible to do that?

>
What actually happens when you browse to a file of type 'TS video' (e.g. using Windows Explorer) and double click on it?>It* opens in VLC media player here, my default player for AVI's.
>
Does it open in the 'software that find the TV station information'?
If not, it probably means that filetype is not 'associated' with that program. If that is the case, it will not work using the Desktop class (as I understand the Desktop class).
What happens when you try to Desktop.browse(URI) to the video?>
>
[http://lmc4b5b.com/temp_stop/123322113213.avi] >
* this file..
>
It seems to be no response.....>That seemed odd, since Desktop.browse() throws a whole mess of exceptions if it cannot do what you ask for. This is the output I got here, for both browse() and open().
Exception in thread "main" java.io.IOException:
Failed to open file:/C:/.../123322113213.avi.
Error message: The parameter is incorrect.
at sun.awt.windows.WDesktopPeer.ShellExecute(WDesktopPeer.java:59)
at sun.awt.windows.WDesktopPeer.open(WDesktopPeer.java:36)
at java.awt.Desktop.open(Desktop.java:254)
...So - I was wrong in thinking any double clickable file would open in the correct program using Desktop. That is a pity.
On a side noted, related to exec().
Can you ..
a) launch the program from the command line?
b) launch the program form the command line, specifying a file to work with?
e.g.
C:>program path/to/the.avi
If so, why not simply add the file name as an argument to exec()? Or indeed (since I notice you are willing to use 1.6) swap the 'exec()' for ProcessBuilder - introduced in 1.5.

"Workflow Template Create" screen appears while executing the work item.

Hi,
I am learning the workflow. I have created a test workflow in which there is a user decision step and 2 mail sending steps for the outcomes of the user decision.The workflow is activated properly . When I excute the workflow the screen for "Workflow Template Create" opens everytime. When I go to the Business workpkace a mail is there in my inbox with the title as given in the user decision step. Again when i am trying to execute the work item in the inbox again the same screen for "Workflow Template create " is opening. I am totaly confused with this problem . Pls suggest what might be the reason..?

I think the Wflow Template Creation screen is not opening but your current session is getting closed so the previous session which is Wflow Create one which you have already opened is appearing. Please check your template design and act accordingly.
Thanks
Arghadip

The work flow of AR invoice to AP Supplier? (Urgent)

Hi Experts,
I am a new user of oracle finanical. There are some urgent issues I need to solve and I could not able to find in Google. Hope someone can give me a helping hand.
We are on 11i (Oracle Financial modules only: GL/AP/AR/FA), I want to ask about how to make the work flow of AR invoice to AP Supplier (e.g. promotion fee).
1. Should we create a customer account and make a invoice in AR for AP Supplier?
e.g. create a AR invoice
DR Receivables $1000
CR Revenue $1000
2. Could we settle/match the AR invoice in AP outstanding as requested by AP Supplier?
And if yes, how to do it and please tell me the detail work flow? And if not, any solution?
Thanks
Sam

Hi Sam.
When you run the Supplier Customer Netting Report you may find that:
-The balance is in your favor.
-You have to pay to the supplier.
For both cases you should create a Bank Account to address the netting operations.
Let’s suppose you face the following situation:
-Customer’s balance is $500
-Supplier’s balance is $600
In this case you have to pay $100 to your supplier.
Using the netting Bank Account record a receipt of $500 and apply it to your customer invoices:
DR     Netting Bank Account     $500
CR     Receivables          $500
Your customer’s balance is now zero.
Record a debit memo in AP against the supplier:
DR     Liability
CR     Netting Bank Account     $500
Your supplier’s balance is now $100.
Issue a payment in this amount using your normal bank account.
DR     Liability          $100
CR     Cash          $100
Your supplier’s balance is now zero. Netting has been done. Check the Cash Account used on the netting Bank Account on a regular basis. If the balance is not zero then something is wrong.
Octavio

How will be outbound data structure in sap xi after executing the stored pr

Hi All
can any one please tell me how will be outbound data structure in sap xi after executing the stored procedure by sender JDBC adapter?
Thanks in advance
regards
Rams

Hi..
My stored procedure is select and it will be OUTBOUND in PI.
is it will be same as following
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2></column-name2>
<column-name3>column-value</ column-name3>
<column-name4></column-name4>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2></ column-name2>
</row>
</resultset>
Regards
Rams
Edited by: Rameshkumar Varanganti on Oct 15, 2008 12:04 PM

Database is Hanging after executing the Procedure ...

Dear All i am using 10G.
I Have a procedure . After executing the Procedure when i try to call that procedure it is hanging ...
it is creating Locks .. As our DBA told..And told to check the code ...
Can any one tell me how can i put mu codes with formatting ? When i copy paste my code it is showing properly but after POST MESSAGE it is showing like i have written history ...--*
I am Executing the procedure like this ...
EXEC simulator_validation ('0|BP-V1|20101004|01|1|2430962.89|27|2430962.89|MUR|20100928120106','04-SEP-2010',27,2430962.89,'MUR','000111111111');
And my code is :-
{Create Or Replace Procedure simulator_validation (lstring varchar2,ldate date,lno_item number,ltotal number,lcur varchar2,lac_no Varchar2)
IS
l_swift_code_acno number;
l_ACno_Valid number;
l_swift_code_others Number;
lpcode varchar2(5);
lCcode Varchar2(4);
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
LToken   VARCHAR2(100) ;
i        PLS_INTEGER := 2 ;
lfirst_char number;
lvalue Varchar2(100) ;
lcol number:= 1;
Begin
lfirst_char := Substr(lstring,0,1);
Dbms_output.put_line(lfirst_char);
      IF lfirst_char = '0' Then ------------------- For the 1st Line - Should be start from 0
            Loop
              LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
              lvalue := LToken;
                  IF lcol=1 then
                         If lvalue='BP-V1' THEN
                               Dbms_output.put_line('1');
                         Else
                             Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0003','Invalid file type and version number');
                            Dbms_output.put_line('2');
                        End if;
                  Elsif lcol=2 then
                          If lvalue=To_Char(ldate,'YYYYMMDD') THEN
                             Dbms_output.put_line('3');
                        Else
                             Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0004','Due date differs from the value inputted in the loading screen');
                             Dbms_output.put_line('4');
                        End if;
                  Elsif lcol=3 then
                               Begin
                                     Select PAYMENT_PURPOSE_CODE into lpcode
                                     From MU_PURPOSE_CODE
                                     Where PAYMENT_PURPOSE_CODE = lvalue;
                                 IF lpcode = lvalue Then
                                       Dbms_output.put_line('5');
                                 Else
                                      Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0006','Invalid payment purpose code');
                                      Dbms_output.put_line('6');
                                 End If;
                            Exception
                                When No_data_found Then
                                Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0006','Invalid payment purpose code');
                            End;
                  Elsif lcol=4 then
                                If lvalue='1' THEN
                                     Dbms_output.put_line('7');
                                Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0008','Total number of debit records in header does not tally with number                   debit records in the file.');
                                  Dbms_output.put_line('8');
                               End if;
                  Elsif lcol=5 then
                                If lvalue=ltotal THEN
                                      Dbms_output.put_line('9');
                                Else
                                    Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0010','Total debit transaction amount in header does not tally with the sum of debit transaction amount in the file');
                                   Dbms_output.put_line('10');
                              End if;
                 Elsif lcol=6 then
                                If lvalue=lno_item THEN
                                     Dbms_output.put_line('11');
                                Else
                                    Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0025','Number of credit records does not tally with credit records in the file.');
                                End if;
                 Elsif lcol=7 then
                                If lvalue=ltotal THEN
                                     Dbms_output.put_line('12');
                                Else
                                     Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0026','Sum of credit records does not tally with total transaction amount as inputted in the loading screen');
                                End if;
                Elsif lcol=8 then
                                If lvalue=lcur THEN
                                      Begin
                                                Select Cur_CODE into lCcode
                                                  From Mu_currency_Code
                                                Where Cur_CODE = lvalue;
                                                Dbms_output.put_line('13');
                                      Exception
                                          When No_data_found Then--------------------
                                             Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0014','Invalid Currency');
                                      End;
                                Else
                                      Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0013','Currency differs from the value inputted in the loading screen');
                               End if;
                 Elsif lcol=9 then
                                If lvalue=Null THEN
                                      Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0015','Timestamp should not be null');
                                Elsif lvalue <> lvalue Then
                                     Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0046','Timestamp in header should be in the format YYYYMMDDHHMMSS');
                                End if;
                   End IF;
                  EXIT WHEN LToken IS NULL ;
                     i := i + 1 ;
                     lcol:=lcol+1;
                   End LOOP;
          Else
                                  Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (9999,'0002','First line should always start with 0');
          End if ;}
-------------------- For the 2nd Line , should be start from 9 .-----------------------------
{ lfirst_char := Substr(lstring,0,1);
IF lfirst_char = '9' Then
LOOP
LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
lvalue := LToken;
IF lcol=1 then
If lvalue < 0 THEN
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0017','Amount should be greater than zero');
Elsif lvalue = ltotal THEN
Dbms_output.put_line('20');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0018','Transaction amount differs from the value inputted in the loading screen');
End if;
ELSIF lcol = 2 THEN
If lvalue = Substr(lac_no,4,9) THEN
mcb_simulator_pkg.Acct_no_Validator(lvalue,1111,l_ACno_Valid);
mcb_simulator_pkg.Swift_code_validator_for_ac_no(lvalue,1111,l_swift_code_acno);
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0020','Account number differs from the account number inputted in the loading screen');
End if;
ELSIF lcol = 3 THEN
If lvalue is not null THEN
mcb_simulator_pkg.Swift_code_validator_for_other(lvalue,1111,l_swift_code_others);
Else
Dbms_output.put_line('21');
End if;
END IF;
EXIT WHEN LToken IS NULL ;
i := i + 1 ;
lcol:=lcol+1;
End Loop;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (8888,'0016','Second line should start with 9');
End IF; }
-------------------- For the 3rd Line Should be start from 1.--------------------------
{ LOOP
lfirst_char := Substr(lstring,0,1);
IF lfirst_char = '1' Then
Loop
LToken := mcb_simulator_pkg.Split( lstring, i , '|') ;
lvalue := LToken;
IF lcol=1 then
If lvalue > 0 THEN
Dbms_output.put_line('24');
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (1111,'0017','Amount should be greater than zero'); End if;
ELSIF lcol=2 then
Mcb_simulator_pkg.Acct_no_Validator(lvalue,1111,l_ACno_Valid);
Mcb_simulator_pkg.Swift_code_validator_for_ac_no(lvalue,1111,l_swift_code_acno);
ELSIF lcol = 3 THEN
If lvalue is not null THEN
mcb_simulator_pkg.Swift_code_validator_for_other(lvalue,1111,l_swift_code_others);
Else
Dbms_output.put_line('26');
End
END IF;
EXIT WHEN LToken IS NULL ;
i := i + 1 ;
lcol:=lcol+1;
End Loop;
Else
Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (7777,'0022','The third line onward should start with 1');
End if;
END LOOP;
Commit;
End;}
Edited by: LuKKa on Oct 4, 2010 9:20 PM
Edited by: LuKKa on Oct 4, 2010 9:25 PM

Yes i gave {} but it is also coming like this ...Yes, since you should use {noformat}{noformat} before and after your example, and not putting your example between a '{' and a '}'.
So, when you post/type/copypaste:
{noformat}select *
from emp;{noformat}
on this forum, it will appear as:select *
from emp;See the FAQ for more tags/tips:
http://forums.oracle.com/forums/help.jspa

How to delegate the work flow process.

hi
i was wondering if someone has taken a leave and he is replaced by an employee x,the work flow approval should be directly move to the employee x.
but its not the case.as when someone is one leave,the workflow does not go to his replacement to approve
Is there a way how to delegate the workflow process?"
Thank you

Hi,
By identify the replacement in leave process, workflow process doesn't route to that person. I guess that replacement field is just for data capturing only. The approver should use delegate functionality available on notification responsibility to identify which process route to which person in a given time period.
Thanks

What needs to be done to include the leave request type in the work flow

what needs to be done to include the leave request type in the work flow?
the present request for work flow includes the notificationto be sent to the approver
which doesnt include leave request type inthe description
to include this we need to maintain a container variable but what should be the method or abap dic object which has to be used for maintaining this leave request type container

Hi,
You can create and take where you pass leave type and get description of it and create an field in WF containr and fill it than you can use add that field when you are sending notification,.
Atul

Error after executing the edidlinv

Hi All,
Following is the error message i am facing after executing the batch edidlinv
edidlinv_1~20120229104954~process~invc_head, invc_detail, invc_xref, invc_merch_vat, invc_non_merch, item_master, sups, partner, vat_code_rates, v_restart_store_wh~-1405~ORA-01405: fetched column value is NULL~CURSOR FETCH: cursor=c_invoice, ps_driver_name=STORE_WH, ps_num_threads=1, ps_thread_val=1, ps_restart_invc_id=8678.
Regards,
Sushanth.D

please open the pro*c source in an editor, lookup the cursor mentioned, and study it and/or run it in sqlplus, to understand why no data is found.
E

Sql Query need to extract the Work Flow information from Hyperion Planning

Can Any one give me the sql query to extract the Work flow from Hyperion Planning in 11.1.2.1.
I can extract from the Hyperion Planning but it is not in required format again I need to do lot of formating. I need the information as per the flow structure is showing linke in one perticular planning unit in all coloumn format. Hence only sql query will help me to extract this kind of information. could any one provide the sql query to extract this kind of request.
Thanks in Advance.
Edited by: 987185 on Feb 9, 2013 10:57 PM

If you have a look at the data models in - http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip
There is the structure of the planning application tables, have a look at the HSP_PM_* tables
Alternatively you can look at extracting the information using LCM.
Cheers
John
http://john-goodwin.blogspot.com/

Event linkage deactivated after executing the work flow

Similar Messages

Maybe you are looking for