Event Linkage Getting Disabled In PO release Workflows : Plz help

hi all
i am working on PO Release Workflow
my problem is when I create PO and save it , the event  linkage in SWETYPV gets disabled
plz help me its urgent.
regards
ravish

Hi
If you have an error in the event linkage (could be a binding error, or an error in your business object), the event linkage will deactivated (the standard customizing).
You can change this behavior through transaction SWE2 -> double click on your event linkage -> change the "Behavior Upon Error Feedback". (I think you can change this globally but I'm not quite sure where)
In my book best practice here will be;
1. Use the event queue
2. Set the "Behavior Upon Error Feedback" flag to something like "Keep linkage but flag as having an error" - I'm not on the system so I'm not quite sure what it's called
By doing this you make sure that you will collect your event in the event queue, in case of an error.
or
In the detail screen of SWETYPV there's an option called Bahaviour upon error in receiver, if you change this to option 3 then the linkage won't be disabled in cases of errors.
Sometimes you want the event linkage to be disabled in cases of errors, espescially when the only reason that an error can occur is a very serious one.

Similar Messages

  • TS3694 Hi, I have a trouble to restore my iphone 3 series but I  always get a error that is 1015. plz help to restore it. thanks

    Hi, I have a trouble to restore my iphone 3 series but I  always get a error that is 1015. plz help to restore it. thanks

    Error 1015 means either you're trying to restore to an earlier iOS version, which is not supported, or you previously hacked the phone - jailbroken or iOS downgrade.  In the later case, you can no longer restore or update.

  • HT4113 my iphone is disable conact to itune solution plz help us

    my iphone is disable conact to itune solution plz help us

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Workflow for PO-Event Linkage get unchecked after making Purchase Order

    Hi,
    I have a client reqiirement for setting Workflow for Purchase Order.
    I have done all the settings for PO Workflow. I am getting the mail for the first time but from the second PO onwards I am not getting the mail.
    When I checked the settings, the Event linkage in SWETYPV gets unchecked for BUS2012 Object Type automatically after making the first PO.
    Again when I activate that, I am able to get mail for the first PO only. From the second onwards, no mail is triggered.
    Could anyone suggest?
    Thanks,
    S.Raghavan
    Hi,
    I now have changed the "Behavior Upon Error Feedback" to "Mark Linkage as having Errors" in SWETYPV
    After this change if I make a PO, the link doesn't get break but "Receiver Status" shows "Errors".
    I could also see the overview of errors in Transaction code  SWEQADM. It shows 3event with Errors and 1 linkage with errors.
    I do not know in which event error is there and in which linkage error is there?
    Can anyone help to see the events and linkage where error persists?
    Edited by: S.Raghavan on Aug 30, 2011 6:22 PM
    Hi all,
    Any suggestion for the issue posted?

    In SWDD select WS 20000075 in the first task assign agents(users, ie create u r own users),
    without user IDs(as u r step 2).if u design "organization plan" then userID's r assigned (like manager,supervisor, clerk etc.,)
    try it

  • IMovie HD 6 to Apple TV workflow plz help!

    Hello all, I could really use some help here and I'm at my wits end.
    I am unsuccessfully able to get Camcorder video from a sony HDR-HC3 Hi-Def 1080i (records on HDV) camcorder to look like HD camcorder footage on my Apple TV. I guess that's the simplest way of breaking it down.
    I am familiar with video editing. I have all the software (and hardware- Elgato Turbo HD.264), and will buy whatever else I need to make this work, but I just can't do it.
    Whatever video I export to AppleTV no matter how much I process it (in JES Deinterlaceer, iMovie 6, iMovie 09, Final Cut Pro, ad infinitum....) I CAN NOT get the resultant video to look like 'Camcorder footage' on my Apple TV.
    ie...if I were to plug my camcorder directly into my TV, the interlacing, fields, whatever...makes the video look a certain 'way' (Like a camcorder plugged into a TV)...when I play back my edited footage through AppleTV it looks 'different'...like it was shot on film. The interlacing is all gone or something.
    If you are familiar with the issue I am describing can you PLEASE help me with the proper workflow I need to establish to get 720p interlaced 'camcorder like' footage from my Apple TV. Or is it even possible?
    Thank you so much in advance.
    Brian

    Ok..here are some files to help demonstrate the problem I am encountering.
    access my iDisk here: https://public.me.com/testpilot58d
    *RC Stuff.mov* is the footage from my camcorder in iMovie.
    When I export it to HD 720p setting using turbo.264 HD, the resultant file is *RC Stuff.mp4*. This file is beautiful...perfect...crisp...looks just like my HD camcorder. It is 1280x720 progressive (Apple TV spec), avg bitrate 4,907 kbps (Apple TV spec) but it is 59.940 fps (NOT to spec) size 3.2mb
    When I choose the "Apple TV" output option, I get file *RC Stuff.m4v*. It is flat, not crisp, doesn't "popp" on either my iMac or when viewed on Apple TV. It too is 1280x720 progressive, avg bitrate of 3,438 and 29.970 fps. I changed output size to 1280x720 in the Apple TV preset and it still looks flat and crappy.
    So....who can get me from point A to point B? How do I need to process RC Stuff.mov to that it will LOOK like RC Stuff. mp4 but is compatible with Apple TV specs and looks as good on a HDMI LCD flat screen TV? How do I deinterlace/what field order, etc to cut the frame rate in half and still look sharp and crisp?
    Thank you anyone in advance!

  • While runnig the job I am getting the following Oracle_Error...Plz Help Me

    Hi All,
    I am new to this forumm
    I am running a job in control m Server...While runnig the job I am getting the following error.... Please help me to sort out this issue...
    err_mess=old 524: record_date := to_date('&1','YYYYMMDD');
    new 524: record_date := to_date('20090411','YYYYMMDD');
    rmis_org_load.update_org_lookup ( org_id,
    ERROR at line 928:
    ORA-06550: line 928, column 2:
    PLS-00306: wrong number or types of arguments in call to 'UPDATE_ORG_LOOKUP'
    ORA-06550: line 928, column 2:
    PL/SQL: Statement ignored
    ORA-06550: line 999, column 2:
    PLS-00306: wrong number or types of arguments in call to 'UPDATE_ORG_LOOKUP'
    ORA-06550: line 999, column 2:
    PL/SQL: Statement ignored
    ORA-06550: line 1040, column 2:
    PLS-00306: wrong number or types of arguments in call to 'UPDATE_ORG_LOOKUP'
    ORA-06550: line 1040, column 2:
    PL/SQL: Statement ignored
    + [ 1 -ne 0 ]
    + print RMOG0003 Error during rmog0003.ins .\n\n Error message : old 524: record_date := to_date('&1','YYYYMMDD');
    new 524: record_date := to_date('20090411','YYYYMMDD');
    rmis_org_load.update_org_lookup ( org_id,
    ERROR at line 928:
    Let me know If you have the answer
    Edited by: user2708250 on May 21, 2009 10:34 PM

    Hi, you're calling the prodedure with the wrong parameters.
    You can check by f.i:
    SQL> desc rmis_org_load
    what parameters the procedure needs and in what order.

  • I am getting error!!!..Plz help! its urgent!!!

    Hi Experts,
    I am getting following error.
    The initial exception that caused the request to fail, was:
    com.sap.tc.webdynpro.progmodel.context.ContextException: DataNodeInfo(LoginView): unknown child node Frage
    Please help me with this.
    Cheers,
    Darshna.

    Hi Darshana,
    In the case of characteristics with attributes from the attribute names, the application generates corresponding context nodes in the Web screen application. No special characters are allowed here. In the case of attribute names with special characters, the error message com.sap.tc.webdynpro.progmodel.context.ContextException is issued when you call the F4 input help.
    The error is corrected in SAP Netweaver 2004s BI Support Package 8 Java. For Support Package 7 Java, you must import Support Package 7 Java Patch 1.
    Check this links.
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cef4f43e-0d01-0010-db84-ede25c874115">Why to use the Common Model Interface (CMI)?</a>
    Sap Note
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_pla/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393339333237%7d">939327</a>
    SapNote
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_pla/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31303038333535%7d">1008355</a>
    Regards,
    Mithu

  • HT1473 Ok I have gone thru this process several times and called them several times but still can't get my photos on my iPad plz help

    Can someone please walk me trough how to do this?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • HT1491 M trying to get Facebook on my I pad plz help me

    I need Facebook

    Hi,
    Which version of Flash Pro are you on? If on Flash CC and are being asked for a password, see Creative Cloud applications ask for serial number
    If you are on a perpetual license of CS6 or earlier, contact Adobe Customer CareContact Customer Care
    Thanks,
    Preran

  • In HCM form & process Workflow event linkage changed to inactive status.

    Hi,
    In HCM  form & process event linkage is activated in HRASR_DT and workflow object .
    Now once we complete the process from EP portal ,reference number is generated and enteries are created in  table T5ASRPROCESSES .
    In SWEL,event is triggered and linked with the same workflow.
    Now the problem is,thesre is no workitem in SWIA with this workflow numbmer and the event linkage also changed to inactive status ( both in proces and  workflow )after we complete the process from EP.
    Thanks
    Manoj

    Hi
       When you are delaing workflows with HCM Process and form the behaviour is slightly different from the normal.. In order to check why the event linkage is inactive the possibilities are
    1. Either there are some chnages done in the workflow  and it is not activated from the transaction HRASR_DT.
    2. The other possibility is that you might have directly actovated the workflow from SWDD transaction and if you have done in this way then it is a wrong way of generating and activating the workflow
    Follow the below steps to find the error
    1. Execute HRASR_DT txn and try to activate the workflow from here. If you try to activate the workflow from this transaction the check function module which is linked to the workflow will be knowing that for which specific process which workflow has to be triggered..
    so in HCM process and forms frame workf it is always suggestable that try to create the workflow from HRASR_DT transaction using forward navigation and activate the respective event linkages.
    The other point you need to check is make sure that all the respective program exit classesare included in the basic data of the workflow other wise even if you miss the program exit classes in the basic data the workflow will not be able to start its process/execution.
    Regards
    Pavan

  • Event not getting triggered for a few users in production

    Hi Experts!!
    We have a workflow that gets triggered on the event REQUESTCREATED of BUS2089. In production, we see that for a few users the event is getting triggered and even the workflow is. But for a few users, the workflow is not getting triggered. However, we didn't check SWEQADM yet and are waiting to get auth to check the same. But before that, I need your valuable suggestions on this.
    When I check SWEL, I cannot see any entries at all. Not even for the successfully processed ones.
    Auth objects cannot be a reason, as all the users have same auth. Please suggest me on what else can be the reasons.
    Your help is highly appreciable.

    Hello Srinivas !
                  Check in SWEQADM to know whether the event is on queue.If so, redeliver it.
                  If there is no event on queue, check the RFC queue( transaction SWU2 ) and ST22 for possible ABAP dumps.
                  Call work item list report (transaction SWI1) and check event linkages (transaction SWETYPV )of the users for whom the event is not triggered.Are you using BAdI or user- exit to trigger the workflow ? If so, check whether those are in active state.
                 Refresh the workflow buffers(transaction SWU_OBUF).Check either of the workflow versions are in active state.
    Regards,
    S.Suresh

  • PR release workflow - issue in mulitple level approval

    Hi Experts,
    I have developed a new workflow for PR release strategy.
    Business object: BUS2105 ( Purchase Requistion )
    Triggerring event: ReleaseStepCreated
    Step1: Workflow started ( Releasestepcreated)
    Step2: Approve PR ( Agent1)
    Step2a
    If yes --> Released to next level (Agent 2 )
    Step2b
    If No --> Rejected and notified initiator
    If Yes --> Notify intiator and exit
    Step3b.
    If no --> based on next release code and release
    group get the next level agent and go to
    step2
    Step4: Workflow ends.
    Issue:
    For single step PR release, workflow is working fine.
    When PR created with multiple level release, a workflow triggers and notifies the 1st level agent, when the agent releases the PR at 1st level and saves it , workflow is not proceeds to further steps to find the next level agent.
    Here i am using the FM to fetch the approvers and assigning the same for release codes.
    Please guide me...

    Hi
    ''workflow is not proceeds to further steps''... do you mean that RELEASESTEPCREATED event is not triggered for next step ?
    you can check this in SWEL that whether event is getting triggered after first release.
    If yes then the issue is in configuration of release strategy where for all release code you need to mark workflow parameter 1.

  • Creating Zmethods & ZEvnts in  Workflow Plz give me Code sample if u have

    hi,
    i want to create my own methods and events in workflow plz help me. do needful to me.
    Regards,
    Aniruddha.

    kfznr          kostentraeger          kmstand
    ND-AB_123      <b>P928392132</b>      <u>10000</u>
                    <b>P9239189111</b>        <u>12000</u>
    HERE I M SENDING KFZNR WITH CAPS, KOSTENTRAEGER WITH BOLD AND KMSTAND WITH UNDELINE

  • I am having problemes opening attachments from adobe reader.  I'm getting error 1606 (an internal error).  Plz HELP!

    I am having problems opening attachments from adobe reader.  I'm getting error 1606 (internal error).  PLZ HELP!

    <http://kb2.adobe.com/cps/402/kb402867.html> might help.

  • Event linkage is getting disabled

    Hi Experts,
    I made some changes in my workflow and transported the same into my quality server.
    but when i am trying to execute that workflow it is not creating any workitem and it is deactivating my event linkage.
    please guide me i am stuck in this.
    Thanks in advance.
    Regards
    ANit

    Probably you have to check SWEL to find what is wrong with the event triggering. Probably some mandatory parameter is not getting passed or some authorization issue.
    You can also change the Feedback Upon Error in SWE2 for your Workflow template entry to DO NOT CHANGE LINKAGE. The vent linkage will not be deactivated such that events which are good will trigger event after the Error event.
    Thanks
    Arghadip

Maybe you are looking for