Event Log Trigger on New-Mailbox Event in MSExchange Management Event Log and Email in HTML Format

I created a custom event view and created "Attach Task to this custom view" task scheduler job based on the custom view. Whenever a new user is created a receive the email however, the body of the email is blank. I'd like to pass the event detail
into the body of the email as HTML. Any assistance on how to create a script to accomplish is much appreciated.

Did you find an answer to this question yet?
¯\_(ツ)_/¯

Similar Messages

New Cridex Banking Trojan variant Combines Data Stealer and Email Worm

Hi Team,
In an effort to infect large number of people, cybercriminals have developed a new malicious software program that contains functionality to spread itself quickly.
Geodo, a new version of the infamous
Cridex (also known as Feodo or Bugat) banking information stealing Trojan works in conjunction with a worm that sends out emails automatically to continue its self-spreading infection method, effectively turning each infected
Windows system in the botnet for infecting new targets, Seculert warned.
Ref:-
http://www.seculert.com/blog/2014/07/geodo-new-cridex-version-combines-data-stealer-and-email-worm.ht
Here again, Our Securiry team wanted to know whether FEP able to detect this Malware or not.
Please let us know your update on this.
Regards
Sudam Bisi
Cognizant

There are many ways which FEP protects you against different kind of malwares, for example using heuristic detection and behavior monitoring , it is possible to detect even unknown malwares. The issue with new malware and cybercriminals is an on-going issue
and for this reason you have regular updates.
If you have sample of this threat, you may submit it to Microsoft Malware Protection Center:
http://cyberdefend.wordpress.com/2012/08/11/submit-sample-to-microsoft-malware-protection-center/
https://www.microsoft.com/security/portal/submission/submit.aspx

With new ios6 all my devices are linked message and email wise how do i seperate them?

I upgraded my iPad, and both my and my wife's phone today with the new iOS6.
Now we all are recieving eachothers messages and emails! I want all the devices seperate like they used to be in iOS5. Can I turn this linking off? I susspect it was in the initial setup after install that I linked all these devices.
Thanks

I had the same issue. With my son and my phones. We both updated to ios6 and were receiving each others text messages. We are on the same apple ID account. To correct this, I went into settings on my phone and disabled iMessage. Also, he was able to set up a separate iCloud account while still being under our shared apple ID account. This should prevent shared messages and shared contacts as well. Just a couple of ideas. Hope it helps.

How add new HTML5 input tags to Insert,Form menu and Insert,Tag,HTML?

how do I add new HTML5 input tags to the Insert,Form menu and Insert,Tag,HTML tags menus of dw cs5?
I remember seeing some documentation about the latter, but it wasn't very good. can't figure out how to actually implement something, so need a mentor - and I am a software developer. :-/
http://help.adobe.com/en_US/dreamweaver/cs/extend/WS5b3ccc516d4fbf351e63e3d117f53d77c2-800 0.html
but I am not sure what this applies to. manual is not clear on this.

I am removing it from my WATCHES since I find out what was wrong. In the submit.jsp, current needs to be setup instead of create.
<jbo:Row id="myrow" datasource="ds" action="current" >
Have a great week.
Kamran

Loaded new 4.5.0.56 and do not see email in html format

Question...I just loaded 4.5 on my device, but not seeing the email in html.
My email still is showing plain text, with links....anything I should do?

Hi and welcome to the forums!
Thanks for opening a new thread on this.
Try reading this knowledgebase article:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15254&sliceId=SAL_Pub...
Please let me know if this helps!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I didn't find any log in the event viewer about creating new VM.

Dears ,
I'd like to find a log in the event logs about creating new Virtual machine , please check with us.

Hi Ramy,
Sorry for the mistake , I'm using 2012R2 and I have the event ID 13002 .
Now I realize you are using 2012 not R2 , so I found a 2012 host to verify that ... you are right .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Business Event Appraisal Form in New Appraisal System

Hi,
I have created Business Event Appraisal Form in New Appraisal System. I have done Appraisals for one Business Event by an attendee.
Where can see this Appraisal Document of Business Event and do any change if required. Or from we can delete this documents of Business Event Appraisal.
I have tried tcode appchange but there only Personnel Appraisal templates are visible.
Samriddhi

Hi,
If you are using a template created by using the Objective Setting and Appraisals componet you can view and maintain forms filled in by employees via Transaction phap_admin_pa.
Br,
Art

New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?

New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?

New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?

An event in one of my libraries no longer has the event icon next to it's name just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing.

an event in one of my libraries no longer has the event icon next to it's name in the browser just the name only. I can't view the clips in the event or import new clips. I've tried deleting the event and nothing. After control clicking the event it shows all the media that has been previously imported. But it does not allow anything to be done to the event including deleting. This showed up at the beginning of a normal import session. This is fortunately the back-up evant.

Did you perhaps mess with the contents of the library in the Finder?
You may try the solution suggested in this thread:
https://discussions.apple.com/message/24915790#24915790

How to manage Events in the new app Photo ?

Hello,
I downloaded the new app Photo, and I have a big problem of using : I can't use the same way of managing my photos than iPhoto.
In the previous iPhoto, I create "Events" and these events constitute a "album".
For example, I have iPhoto Events "Soho", "Tower Of London", "Pub with friends" etc in the album "London", which operate like a Playist.
Since I have been using Photo, my iPhoto events became Albums, and the new Events are Moments, that we cannot rename !
The problem is when I am in the London Album, I can't reach my event "Pub with friends" directly, I can only reach the Moment, with a non-explicite name... So I don't know where I was, that's catastrophic for me and my XXX photos..
How can I do to avoid this lost of information ? It's not possible to rename all the Moments by the name of the old events ?
I liked this way of classification, Apple stucked us in this way and now changes the rules !
Thank you very much for your help, I hope I was clear enough.
Thomas

The problem is when I am in the London Album, I can't reach my event "Pub with friends" directly, I can only reach the Moment, with a non-explicite name... So I don't know where I was, that's catastrophic for me and my XXX photos..
Do you mean that the contextual menu will only offer "Show in Moments"? The moments are more useful, if you assign locations by adding GPS tags to your photos before importing them to Photos. Moments are based on dates and locations. That will take care of the "where I was".
If your photos have GPS assigned, you can click the name of the location in the Moment and see the photos on an Map, for example:
Click the location name "Cutty Sark" and you will see the the map:
And the map in Moments:

How can we use CMC / events to trigger a process?

Is there a way we can make CMC / events to trigger a stored procedure or at least a .exe file?
how?

There's a starter on events here:
http://scn.sap.com/community/bi-platform/blog/2013/01/07/cmcevents-in-business-objects-and-its-usage
Not sure exactly of your workflow, but you can also schedule a custom program object and schedule that to run based on your own timelines.
http://scn.sap.com/docs/DOC-40837

I have a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder app. There are also no "calendar" and "add an event" bottons on the Calendar App. Why?

I just bought a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder App. There are also no "calendar" and "add an event" buttons on the Calendar App. Why? Is there a way to add either a reminder or an event?

For the reminders app - just tap on an open space on the ruled paper window under the heading in order to create a new reminder. Or tap on the + sign in the upper right corner of the app. You do not have the + sign on the app?
For the calendars app to go Settings>iCloud>Calendars>On. Toggle the setting on and off and the + sign should appear in the lower right corner of the calendars app. Tap the + sign to create a new event.

Event to trigger Process Chain

Hello Experts,
I need your suggestions to write an event to trigger a process chains after user put text file to server,
but the PC is not run.
here the step what I have done.
a. define an event SM62 "ZEV_PC_START"
b. create abap code to check the file if exist raise the event ZEV_PC_START with BP_EVENT_RAISE.
c. create Process chain.
d. schedule PC after event "ZEV_PC_START"
Could any one tell me the steps in brief. Pointers to any documentation would be highly appreciated.
thanks
supriatna

Hi expert,
I need create the abap code to check the file if exist raise the event ZEV_PC_START with BP_EVENT_RAISE.
I don't know ABAP, could you help me with the code?
Could you give me examples, please?
Thanks,
Best Regards.

Is i possible to trigger a workflow from the creation of an event in iCal

Is i possible to trigger a workflow from the creation of an event in iCal
Or is is possible to create a workflow to ad events to an iCal calendar which then triggers the workflow or is combined with the ad events workflow.
Graeme

Hmm, nope. Not that I'm aware of. Very few apps allow you to hook scripts directly to user activity. Finder* is a notable exception. iCal's "publish" feature has the ability to auto-update after user activity, but you'll either need dot mac accounts or your own webdav server to get that working.
I'd re-consider the idea of triggering a periodic workflow with iCal. That way if the computer is shut down or asleep, iCal will wait to run the workflow at its next opportunity. You could hide the unsightly repeating events in a second calendar so they're out of the way.
The next best thing is to write a faceless AppleScript application with a long-duration idle handler. The user would simply add it to their login items in System Preferences. This would also resume its cycle after sleep or shutdown.
Yet another option is to write an AppleScript that can register itself in the crontab. This has the advantage of running at a predictable time. If you're careful, you can even set the script to wake up or power on the computer as necessary.
* Folder action scripts can be triggered when files are created, moved, or deleted, but not when they're merely updated. This probably rules out much of iCal's activities in ~/library/application support/ical/.

Problems using event structure to write new parameter values to VISA

Attachments:
FMA_event_2.vi ‏28 KB
FMA_event_2.vi ‏28 KB

It seems I'm also having trouble using forums..not sure what happened...updated and corrected thread: http://forums.ni.com/t5/LabVIEW/Problems-using-event-structure-to-write-new-parameter-values-to/td-p...

Event Log Trigger on New-Mailbox Event in MSExchange Management Event Log and Email in HTML Format

Similar Messages

Maybe you are looking for