Event Management - How to Use?

Hello,
I need some help with event management. This tab is not available on my Adobe Connect and I am wondering how I can enable it. I need to promote my event with emails, as well as create a custom landing page, which I know can be done since it was something I had available to me in my free trial. It seems I might need to change my role to admin but I am not able to do this. Can anyone help me out with this? I have already spoken with 10 customer service reps and they have not been able to assist me.

Contact your reseller, as they can get you the Events module.
If you don't have a reseller, feel free to PM me or contact me off forum jorma[at]realeyes.com

Similar Messages

Manage how to use wireless internet to phone E71

Sorry, but I have a wireless D-link machine at home.I actually want to know how to use internet on my phone .
Thank you

Hi aladdin22
Have a look at this post:/discussions/board/message?board.id=smartphones&message.id=83014#M83014
Don't use CD version of PC Suite but latest from here:http://europe.nokia.com/pcsuite
Lastly make sure that your E71 is in "PC Suite" mode NOT "Data Transfer" mode, go to Menu > Connectivity > USB > USB connection mode.
Happy to have helped forum in a small way with a Support Ratio = 37.0

What is ALERT Management.how to use it?

what is ALERT Management. what is it's use.how to do ALERT Management?

HI
Alerts within XI give us a simple way to monitor only those errors that we want to and send alert messages to different people depending on the alert category.
Alert configuration is used to have the system inform you of errors during message processing.
By using the Alert Framework, central monitoring can be provided with all errors reported during message processing in ABAP and Java. This enables an improved reaction to such errors in both the ABAP runtime and the Java-based Adapter Engine. For this purpose, the Alert Framework is provided with rules based on certain events and on information from the header of the message protocol. These rules determine whether alerts are send or not.
Alert Configuration:
1) An Alert is a notification informing its recipients that a critical or very important situation has arisen. The
situation is as severe that an action must be taken immediately in order to resolve the situation. The
system recognizes the situation and sends the Alert.
2) We use the Alert Configuration to have the system inform you of errors during message processing. we
can receive the Alert by e-mail, fax, or SMS.
3) To configure your Alerts, proceed as follows:
a) Create the Alert Categories that we want to use in our Alert Rules.
b) Create the Alert Rules in which we want to use our Alert Categories
4) An Alert is an instance of an Alert Category
5) Alert Categories can be defined by applications or customers using the Alert Category definition
environment, which is accessed in Transaction Code ALRTCATDEF
6) The Structure of Alert Category is defiened by the following
a) Technical key (language-independent) for identification purposes
b) Description (language-dependent)
c) Classification
d) Priority
e) Maximum number of deliveries. (This applies to delivery to a destination other than the alert
inbox.)
f) Expiry time (in minutes) after which the alert is deleted
g) Escalation recipient to whom the alert is sent if it is not confirmed by any of its recipients
h) Tolerance time before escalation
i) Short text, long text, and title
The title is used as mail title, fax subject, and alert title in the inbox. The long text is used as
mail/fax body and the long text view in the inbox. The short text is used for pager and SMS.
j) Container for variable definition if variables are to be used in the texts, or for other application-
specific attributes
k) Subsequent activities in the form of URLs
pleae refer the following links for furtehr infromation
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm -
Alert
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts u2013 1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts u2013 2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3
Alerts with variables from the messages payload (XI) - UPDATED -
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration by Micheal
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
I hope at the end of this you may get some knowledge on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Alerts with variables from the messages payload (XI) - UPDATED -
Alert configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Calling alerts from UDF
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Email Alerts
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Alert Delivery
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Transport the alerts
http://help.sap.com/saphelp_nw04/helpdata/en/a6/5a94413aaad960e10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
cheers
reward poins if found useful

Work Management- how to use it?

How can I define a work manager?
in j2ee documentation i found that i can use it using someting like that
InitialContext ctx=new InitialContext();
Context envContext;
envContext = (Context)ctx.lookup("java:comp/env");
WorkManager wm=(WorkManager)envContext.lookup("wm/TestWorkManager/");
my problem is that in don't know how to define it and where
The documentation provided here does not help me enough...http://download-west.oracle.com/docs/cd/B31017_01/web.1013/b28956/workcont.htm
thank you in advance!

The Work Manger refered in the Oracle documentation is part of the JCA contract between an application server and a resource adapter. So this Work Manager is only available for a JCA 1.5 resource adapter implementation.

How to use training and event functionality in ESS BP in ep 7.0   ?

Hi all,
        We are using
1). sap portal 7.0 sp 9 and
2). Using back end ECC 6.0
3). And using Ess business package
Business Package for Employee Self-Service (mySAP ERP)   release 1.0
The business package doesnot contain any training and events module iviews.
We want to use training and event management iviews on the portal.
The document for this business package says that to use training and event management iviews we should install   Sap Learning solutions
I want to know?
1. How can we use training and event management iviews without using Learning solutions?
2. What is actually Learning solutions is a seperate module or it is the part of Sap HR module?
Please guide me..
Rajendra.

Rajendra,
Have a look at SAP Note 870126.
Here is a snippet:
<i>The following international ESS applications based on Standalone ITS have been or will be converted to the integrated ITS Version 6.40, and can still be used with mySAP ERP 2005. You can integrate these applications using ESS Homepage Customizing if required:
International ESS Services available on the integrated ITS as of mySAP ERP2005:
Training Center (PV7I) (see Note 771196)
myBookings (PV8I) (see Note 771196)</i>
To answer the second part of your question, the Learning Solution is an optional component that can be deployed in ERP. It complements and extends the existing TEM module. You generally still use TEM with LSO.
Is that what you were after?
Regards,
John

How to use Mouse Wheel Events

Hello Everyone
I am using Datagrid in my Canvas.
I use mouse wheel to scroll the datagrid. But in one scroll
through that wheel make the more than 4 rows to be scroll.
So Now my requirement is to control the delta value of mouse
wheel event and how to use that with my datagrid so that i will
able to scroll one row through mouse wheel scroller.
Thanks

please give me some suggestion around it.
I want to scroll one row of datagrid with per mousewheel
scroll. I am not getting how to use the scrollMouseWheelMultiplier
property of the IConfiguration class because i am not able to
create the object of this class.
I am using the Flex 3.0 and flash 9 version.
please help me out around this.

Using a field as the Event Organizer in Training and Event Management

hello
I want to add field as Event Organizer in Training and Event Management and i use this doc
http://scn.sap.com/docs/DOC-53028#comment-512784
field added but data dosen't save, when I change combox data I could n't see data
for example I add filed max_houre and save 10 ,after save I selected orgnaize unit and save another data,my pervious data in max houre lost!!!!!!

hello
I want to add field as Event Organizer in Training and Event Management and i use this doc
http://scn.sap.com/docs/DOC-53028#comment-512784
field added but data dosen't save, when I change combox data I could n't see data
for example I add filed max_houre and save 10 ,after save I selected orgnaize unit and save another data,my pervious data in max houre lost!!!!!!

TRAINING AND EVENT MANAGEMENT - ERROR

Dear SAP Experts,
I am working on the module TRAINING AND EVENT MANAGEMENT.
While using transaction PSV2 - DYNAMIC BUSINESS EVENT MENU, when i click on BUSINESS EVENT TYPE in that create W/O RESOURCES, I get an error.
PLANNING PERIOD IS NOT IN BUSINESS EVENT TYPE INTERVAL.
Can you please guide me in this.
Please tell me where i am going wrong
Thanks in advance.
Regards
Aniruddha

Hi all,
PLANNING PERIOD IS NOT IN BUSINESS EVENT TYPE INTERVAL (on LSO_PSV2)
I have the same error ...
Does anyone know?
thanks in advance, Sony

Training and Event Management - Blocking

Hi
I'm just starting my journey into sap world and i face with some, i hope simple, problem.
Is that anyway to configure some kind of time buffer(e.g. 24h) before event, in which no one can cancel this event, or maybe this can be achieved in some other way that configuration?
Thanks in advance
Kuba

Hi Kabu,
Which version of SAP LMS or Training & Event management you are using ? I know there is an option in Training and Event mgmt to Lock a Business Event. You can have your training administrators lock the business Event (they dont want emplyee to cancel) 24hr before the actual event time.
SAP Standard Menu choose Human Resources --Training and Events --Business Events -Lock/Unlock. Enter the business event you want to lock. However I am not sure if this can be done programmatically to be automatic feature for all business events.
Also it depends if you are using ITS or Portal. In ITS you may be able to configure the workflow to mould the cancelling status of employees.
Thanks,
Sanghamitra

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to upload Training history in Training and event management .

Hi,
How to upload Training history in Training and event management through which transaction.plz reply at early.

Hi,
You can create LSMWs to
1. create event PV10/PV11
2. Firmly book event PV12 (else can directly create firmly booked events)
3. Book attendee PV00
4. Follow up PV15 ( u can use n LSMW here provided all the emps get same level of proficiency after attendin n event. u wont be able to chnge proficiency level at the time of follow up usin LSMW)
Regards,
Shreyasi.

How to use Sunray without VDI or VMware View Manager

There is no VDI or VMware View Manager in my test environment. Only srss 4.2 and srwc 2.2 has been installed.
Now i have 5 sunray client and 5 Windows XP VM. How can I let every user use their Windows XP VM in this environment and can enable USB redirection?
In page http://wikis.sun.com/display/SRWC2dot2/Managing+USB+Device+Redirection+%28All+Topics%29
Supported Configurations
Configuration
SRS 5 (SRSS 4.2, SRWC 2.2) and Sun Ray Connector Kiosk Session
Description
Supports connection to Windows desktop using the Kiosk session.
My question is How to let mutipl-user use it in this config
The following is my settings and all users now can use their own Windows XP but USB redirection cannot work
Select Common Desktop Environment (Obsolete) in Kiosk mode add an application:
cam_script.windows_connector,
#!/bin/ksh
# Script to map smartcard token to individual VM using either
# the "User Name" or "Other Info" field of the output from
# utuser -p <token>
# Look at output from utuser -p ${SUN_SUNRAY_TOKEN} and grab hostname
# % utuser -p user.1140788210-7053
# Current Properties:
# User Name = tester5
# Other Info = host
# Server Name = localhost
# Server Port = 7007
# Logical Token = user.1140788210-7053
# User Created = 02/24/2006 13:36:50
# Token Enabled?
# Payflex.500af8ad00130100 Yes
# Currently Logged In:
# Current Desktop = 0003bad7566e
# Desktop Location =
# Logged In Since = 02/24/2006 13:36:58
# Use "User Name" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "User Name" | awk '{ print $4 }'`
# Use "Other Info" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
WinHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
# Could probably do a ping test here and pop up dialogue
# about getting support to check the availability of the
# machine (might event be able to use VC API to power up VM?)
# if it doesn't respond to ping. Could use something like
# dterror.ds, could also pop up different dialogue
# if VMHOST is not set
COLOUR_DEPTH=16
# If using 24bit need registry change under Windows XP
#COLOUR_DEPTH=24
# Fix F11 and F12
#/usr/openwin/bin/xmodmap -e 'keycode 75 = F11'
#/usr/openwin/bin/xmodmap -e 'keycode 76 = F12'
# Fix alt & print screen
#/usr/openwin/bin/xmodmap -e 'keycode 77 = 0xff62'
# Turn on numlock
/usr/openwin/bin/xset led 1
if [ "${WinHOST}" = "" ]; then
     #dterror.ds "Your Windows Machine can not be determined.\n\nPlease contact support and ask for smartcard \n\n${SUN_SUNRAY_TOKEN}\n\nto be associated to a Windows Machine" "Smartcard not configured" "ERROR"
     WinHOST="Windows_default"
fi
# Run Windows Connector in full screen mode at appropriate colour depth with sound redirection
# Disable the windows pulldown header in full-screen mode
# RDP Window Attributes options to disable are:
# -D wallpaper
# -D fullwindowdrag
# -D menuanimations
# -D theming
# -D cursorshadow
# -D cursorsettings
/opt/SUNWuttsc/bin/uttsc -mb -A ${COLOUR_DEPTH} -r sound:high -u "" ${WinHOST}
#if [ "$?" = "0" ]; then
#     dterror.ds "Logging Out..." "Log Out" "OK"
#else
#     dterror.ds "Your Windows Machine ${VMHOST} is not visible on the network.\n\nIf you have just restarted it please wait a minute and try again\nIf you still have problems get help" "Windows VM is not available" "OK"
#fi
# End of CAM script
Then add IP address in other information of Token.

Meta Kiosk would certainly do what you need and the USB pass through works.
http://blogs.sun.com/danielc/entry/meta_kiosk_how_to_run
I think the problem you are running into is that you are using uttsc inside a Solaris environment as an app, looks like CDE, which isn't being supported to my knowledge to avoid conflicts between the two desktops. It is designed to work out of the box with SRWC kiosk mode.
The undocumented way to turn it on is to turn usb on by adding -r USB:on as an argument.

How to use event parameters?

Hi
I've made simple eem applet for shutdown the port which trigered storm control event.
It is look like that:
event manager applet shut-storm
event storm-control
action 1.0 cli local python bootflash:shut-storm.py
and the script is
from cisco import CLI
from cisco import cli
import sys
import datetime
import time
import re
whitelist = [
"Ethernet1/1",
"Ethernet1/2"]
shlog = CLI('sh logg last 100 | i ETHPORT-5-STORM_CONTROL_ABOVE_THRESHOLD | last 3',False).get_output()
pat = re.compile(r'(\d{4} \w{3} \d{2} \d\d:\d\d:\d\d) \S+ \%ETHPORT-5-STORM_CONTROL_ABOVE_THRESHOLD: Traffic in port (Eth\S+|[Pp]o\S+)')
now = datetime.datetime.now()
delta = datetime.timedelta(seconds=180)
for l in shlog:
mobj = pat.match(l)
if mobj:
    port       = mobj.group(2)
    logTimeStr = mobj.group(1)
    logTimeObj = time.strptime(logTimeStr, "%Y %b %d %H:%M:%S")
    logTime    = datetime.datetime(*logTimeObj[:6])
    if now-logTime < delta:
      if port not in whitelist:
        cli("conf t")
        cli("interface %s" % port)
        cli("shutdown")
But the python script is a bit complecs because it shoud find triggered interfece in log.
Is it possible to use event parameters? And how?
I know that they are:
sw1# sh event manager history events det
Event ID Time of Event        Event Type                   Slot       Policies
32       09/30/2013 15:40:51 storm_control                active(1) shut-storm
    interface = "Ethernet1/16", cause = "storm-control"

Thank you Joseph.
It works.
Now the applet looks like:
event manager applet shut-storm2
event storm-control
action 1.0 cli local python bootflash:shut-storm2.py $interface
And the script:
from cisco import cli
from syslog import syslog
import sys
whitelist = [
"Ethernet1/1",
"Ethernet1/2"]
port = sys.argv[1]
if port not in whitelist:
cli("conf t")
cli("interface %s" % port)
cli("shutdown")
syslog(2, "Interface %s was shutdown due to storm conditions" % port)

How to incorporate training and event management module in ess1.0

Hi all,
I am implementing ess1.0 on EP6.0, NW7.0, ecc6.0.
now in ess1.0 i could not find traing and event manag. module, but i found it in ITS version of ess.
how can i incorporate 'traing and event manag' module in ess1.0??
do i need to download two version of ess?...i doubt if its feasible!...can anybody guide me on this?
I am new to portal, and hence trying to learn thing in EP ESS...please throw in your help ASAP
Regards,
JJ

hi all,
can anybody please throw some light on the above query?
i m trying to search in forum but i am unable to find any reasonable answer to this.
Regards,
JJ

Getting Training and Event Management Data using IT0031

Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Event Management - How to Use?

Similar Messages

Maybe you are looking for