Event notifcations reply with the wrong time

I get a mime attachment for a meeting and when I reply to accept, it changes the meeting time in the copy of the e-mail reply. What's causing this glitch and how do I fix it?

Go to settings time and date and make sure you have the right timezone setting.

Similar Messages

My Ipod is stuck on a white screen with the wrong time and a lock. computer doesn't recognized my Ipod..also gets hot when connected to charge..any ideas on how to fix this? Thank You

Hi
My Ipod nana...has frozen up and working. It shows a white screen with the wrong time and a lock symbol. When I connected it to my computer, it didn't show up. Back of Ipod gets really warm..Any ideas on how to fix it? Than You

If it happens again and the reset (home + power buttons) doesn't work, just let the battery drain; you'll know when the screen shuts off. Charge it back up and it should be fine. Frankly, I'm surprised this worked for you. Usually I hear people with this problem say that holding both buttons doesn't work, and they have to do the battery drain.
If the issue is incurable next time, you have a one-year warranty from the date of purchase.

My yahoo emails are coming in with the wrong time on my ipad2, My yahoo emails are coming in with the wrong time on my ipad2

My yahoo emails are coming in with the wrong time. Any suggestions on how to resolve this issue?

Go to settings time and date and make sure you have the right timezone setting.

DM Syncs Appointments with the Wrong Times

I have seen numerous posts in the forums about my problem. However, there is always a general statement of "I have never seen this" that is included with any technical support. I know there are numerous others who have the same problem. There are dozens in my company alone.
When I use Desktop Manager versions 4.2.2, 4.5, 4.6, or 4.7 to sync with an Outook 2007 calendar to either a Blackberry 8830WE or 9530 Storm from Verizion, many of the calendar appointments are sync'd with the wrong time. It seems to be isolated to reoccuring appointments and especially those planned by others that I have accepted. The offset is not consistent. It ranges between 3 and 6 hours, but there are always sync'd too early. My reoccuring 8am appointment shows up at 3am right now!
All of the time zones are correct and the same on all devices and in all software. This is a frustating and yet rampant problem.
I am using Google Calendar wireless sync to get around my problem, but it is simply a work around. I would prefer the BB software work correctly. It is troublesome to have to do this. I had a Motorola Q before, and I have had no problems with the same Outlook and Windows install.
PLEASE HELP!

OK, I'll admit I'm a newbee, but I have been dealing with this issue since getting my Storm approx. 2 months ago and it's driving me nuts! I've been through as many posts as I can find and have turned off 'update device time' in DM and made sure all my times and time zones are set correctly in Outlook and BB... I work for a US company and live in the UK, so I am constantly getting appointments with US TZ settings. At first they appear to be handled correctly and appear at the correct UK time and TZ in my Outlook and BB calendars. HOWEVER, when I sync with DM somewhere along the line the TZ (and actual timing of the meetings) is getting adjusted to the local time/TZ.
As an example - I receive a meeting that was natively created for 09:30 Mountain time (GMT-7). I accept this in my local Outlook an it appears correctly. When I sync with DM, however, it gets changed to a 16:30 start and GMT TZ. When I sync again, DM indicates a change to the appointment and forces an update in Outlook - after which the meeting appears in Outlook with a 16:30 start and GMT TZ.
Now, in absolute terms this is OK since the 'local' time of the meeting start is the same with both combinations. But things get completely screwed up when the originator changes the meeting time - causing it to shift all over the place. This is futher complicated since I travel to Europe (and the US) on a regular basis and am thus changing TZs often.
Since the BB calendar allows you to associate a TZ with a meeting when you enter it in the device, WHY does a DM sync result in a forced change in meeting time / TZ and not use the original meeting's??
Surely this is a BUG? Surely DM should not be messing with these attributes at all??

Events in calendar have the wrong date and/or time

I have a 2nd generation iPod Touch and I recently synced my iCal to it using iTunes. However when I looked at the actual events listed in the calendar, after it was synced, some of them had been moved to different dates at different times. Is there a way to fix this?

Some where along the way, the settings are in the wrong time zone. Either the iPod or the server (computer).
My Ex-husband had the same complaint with our shared, online calendar on Yahoo. Whatever I entered on the iPod, came up on a different day and 2 hours off. He didn't have the computer mail account set up to eastern time zone.

Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"

Hello,
I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
Start MSRA
--> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
Select "invite someone to help you"
--> as expected, a window with "Who do you want to get help from" appears
Select "Invite someone to help you"
--> as expected, a windows with "How do you want to invite your trusted helper?" appears
Select "Use Easy Connect"
--> as expected, the temporary "Create invitation window / checking network capabilities" window appears
Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
Any suggestion how to resolve would be appreciated.
(Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
More background information and things I have tried:
The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
This happed with both the 32 as well as the 64 MSRA versions
I'm using Window 7 Ultimate, 64 bit with all the latest updates
This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
The W7 desktop has a single active network connection only
I'm using Windows Firewall and Windows Security Essentials
Disabling the firewall on the PC did not help
Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
Restarting "Peer Name Resolution Protocol" did not help
Restarting "Peer Networking Identity Manager Properties" did not help
Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
Thanks!

Dear Andy,
Thanks a lot for your reply. Let me answer your questions:
Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
A: yes, that way I can establish a MSRA connection
Q: Have you disable other network connections, including disable all virtual network card?
A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
“Diagnosis Repro Attempt resulted in a failure.”
“Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
If you need more details, please suggest what to forward or check. I'm eager to find a solution!
W.

IPhone 4 shuts down on its own all the time. Sometimes restarts without ability to make calls, receive emails, and the wrong time. Only a restore fixes it. What can I try?

So my iPhone had a broken screen and back for a while, which may have something to do with this. I mean like missing peices. I realize this leads to corrosion and I may have a broken iPhone but this is a really strange problem. It's always shutting off on its own, sometimes in my pocket while locked and sometimes randomly while in use. For example the other day this started happening everytime I started safari. This happens all the time, I usually just restart it and it works for a while. Sometimes after shutting off a few times in a row, after restarting it will show the wrong time, screws up phone calls and says that it cannot locate the gmail server, or something to that extent (won't load emails). The phone calls are weird, I can't receive any. Any calls that are made from the phone, go through on the other side and ring for them, but won't ring or make a connection on my side, also I can't end the call when this happens, it responds to me pressing end by fading the screen to that graytone color that it does before ending usually but stays on that screen whenever you go back to it, only disappearing after reseting. Texts work, not in iMessage, and internet seems to work. The only thing that fixes this condition is a restore. The iphone has been turning itself off over the last 3 months and its been getting progressively worse. Recently its been pretty bad, and then the phone started to do all that weird stuff I've been talking about. That started about 3 weeks ago and has happened 4 times, the last two times relatively close together. This is really annoying and I can't afford to replace it. Do I have to live with it? What can I try? Should I maybe replace the battery? I took the panel off to look at it and the plastic around it was pitted possibly from being really hot.

Please don't respond with useless comments. I've already addressed the fact that my screen was broken a few months ago. My phone may or may not be broken beyond repair either way, as I said before I can't afford a new phone. It's a strange problem because from what I can tell no one else has posted the same problem anywhere I can find. Don't be a dickhole.

Sometimes after creating an event folder on iPhoto, all my pictures in that event will be gone the next time I open iPhoto. Why is this happening? Is there a way to retrieve the missing photos?

Sometimes after creating an event folder on iPhoto, all my pictures in that event will be gone the next time I open iPhoto. Why is this happening? Is there a way to retrieve the missing photos?
Most events I make on iphoto will still be there the next time I open iPhoto, while other event FOLDERS will be there, but pictures in it gone.

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Why does Messages show the wrong time I received a text?

First of all, I use the version iOS 6.1.4, I do not like iOS 7 which is why I haven't updated it. Anyway, when I text someone and I get an Alert/Banner on my screen, it tells me the wrong time I received a text. It is off by a minute or two. It happens whether I'm texting someone without an iPhone (using SMS) and when I'm texting someone with an iPhone (using iMessage). Without upgrading to iOS 7, what can I do to resolve this issue? Just restart my phone?

I just reset my phone, so we'll see how that works. And honestly it really doesn't, if you were asking the general person. But I'm sort of weird and I like to create conversation logs from the texts I have with my close friends, and I record the times I send/receive each text, so if it's off by a couple minutes then it's off on my log. So I mean it isn't the end of the world, it just bothers my OCD a bit.

PDF saving with the wrong date

When I save a file, it saves with the wrong date: it is off by 5 years and 1 day and the time is completely wrong. This has been happening for months and has not been fixed by installing newer versions of Adobe Reader (I currently have version 10.1.7). The date/time on my computer is fine and Microsoft Word documents save with the right date & time...

I'm actually having a similar problem with the computers that are used at my work, though not with a 5 year difference; Our pdfs get saved as if it were 2 days previous. We use mostly AutoCAD and print to PDF. The pdf gets saved to a shared drive, but everything else that we save on that drive (word documents, excel spreadsheets, AutoCAD files, etc.) have the correct date. I checked to see if maybe it had something to do with the time stamp server settings, but we don't have a server set up. The time on all of our computers is also set to the current date and time. We do sometimes save pdfs from outlook, from clients, but have the problem regardless of if we were using outlook or not. It's not a terribly huge deal, but sometimes we check to see when pdfs were updated versus their corresponding drawings and it gets confusing when the date is off. Any help would be appreciated. Thank you.

How to fix iPhone 5 from displaying the wrong time

Work up the day is daylight savings time and come to find out my iPhone was displaying the wrong time tried to switch from manual and automatic quick to see if it worked and nothing turned it on airplane mode still didn't work and I noticed I'm also having problems with my service please help

If it is on automatic time, then the time is received from the carrier. If you say you are having "service" problems, I am assuming you mean your carrier. It could be an overall carrier problem. Contact them.

Will hardware drivers work with the run-time engine or only a full version of Labview?

Hello.
I'm trying to get a quatech I/O card to work. The instructions with the drivers we were given state "you must have labview installed before installing these drivers".
A program I wrote on my machine works fine with those drivers and does toggle outputs on the card, but when I build it into an executable on our test unit (doesn't have a full version of Labview, just the Run-Time engine) the card doesn't work.
We installed the run-time engine on the unit, then the drivers.
I guess my question is: Do most drivers work with both the full version of Labview and the run-time engine? Or do I need to somehow 'convert' these drivers to work with the run-time engine?
Th
anks for your help!
Dave Neumann
[email protected]

Dave:
I can't determine which dll is required but if there are more than one that
shipped with the quatech I/O card try to placing one dll at a time in the
same directory as the exe so that you can determine which one is the
required one. If that doesn't do it then it may need more than jsut one of
the dlls so placing all that came with the quatech I/O card s/w driver
package in the same directory as the exe should do the trick.
Best of luck.
-Tom
"Neumannium" wrote in message
news:[email protected]..
> Tom,
>
> Thanks for your reply. One of the problems I'm having is figuring out
> which .dll I would need to include (I'm not a software guy).
>
> Would the .dll your speaking of be different th
an the one which is
> installed with the drivers? I'm looking at a .dll that is installed
> when you install the labview drivers for this card, but the run-time
> engine still doesn't want to get the card to work. (The file installed
> when I install the drivers is called 'daqlv32.dll' and I don't know
> how to find any other .dll's I might need)
>
> Actually, it appears the card 'is' being seen by the run-time engine,
> but I'm getting impulses rather than distinct changes of state.
>
> Anyway, thanks for the help.
>
> Dave Neumann
> [email protected]

Activated iphone with the wrong number

I bought 2 new iphones for my sons. I activated the first phone correctly and his phone is working great. I activated the 2nd phone for the other son but used the phone number I had put into the first phone. Is there anyway to deactivate the phone with the wrong number and start over? Any other ideas?

that happened to me the first time. I had to buy another SIM card and reactivate again. An extra $25 for another SIM.

My music pictures are with the wrong songs, how do I fix that?

I plugged my iPhone and iPod into my computer to update my music and when I unplugged them all the music pictures were with the wrong songs. I've tried shutting them off and restarting them but it doesn't fix the problem, any ideas?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

How do I update the iCloud ID on my phone? I changed my ID on my laptop, but my iphone still has "sign in to iCloud" with the wrong ID and I cant figure out how to change it.

I have same question

Event notifcations reply with the wrong time

Similar Messages

Maybe you are looking for