Event renaming bug?

If I remember correctly, in iLife '09 it was possible to rename the Event title while viewing the photos therein.
In iPhoto '11, however, the only way to rename the Event's title is to return to the list of events and rename it there. There exists NO option for doing so while browsing the photos in the event.
Am I missing something or is there just no such option?

WHile viewing an Event there are two ways to rename it:
1. On the title bar, top of the window, simply double click on the title and edit
or
2. Edit the title on the Info Pane
Regards
TD

Similar Messages

[svn:fx-trunk] 9215: Event Propagation bug fix

Revision: 9215
Author:   [email protected]
Date:     2009-08-10 17:30:21 -0700 (Mon, 10 Aug 2009)
Log Message:
Event Propagation bug fix
http://bugs.adobe.com/jira/browse/SDK-21044 - Spark Components should use event.preventDefault instead of event.stopPropagation
Since keyboard are now cancellable, the Spark components should use event.preventDefault() / event.isDefaultPrevented() instead of event.stopPropagation. I updated ButtonBar, RadioButton, and DropDownList to use preventDefault(). Also cleaned up Slider and Spinner to always assume the event is cancellable.
QE notes: Add tests with these components inside of scrollable containers
Doc notes: None
Bugs: SDK-21044
Reviewer: Hans
Tests run: Slider, Spinner, RadioButton, ButtonBar, DropDownList
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21044
    http://bugs.adobe.com/jira/browse/SDK-21044
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ButtonBar.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RadioButton.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Spinner.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/DropDownCont roller.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

error dateField not selecion date 27/11/2002 ?
This is bug flex 3 ?
thanks

Centro Calendar event display bug

I have had Palm handheld devices since 1998. I just got a new Centro and am installing my data onto it. (My phone service has not yet switched to it; it is still just a pda at this point.) This upgrade went smoother than previous ones, except for two minor issues and one major one. Minor issue #1) My new Palm Desktop software (ver 6.2.2) does not display any colour on my Sony Vaio running XP. Minor issue #2) I cannot seem to tell the desktop to store the data files anywhere other that Cocuments and Settings/Carol/My Documents/Palm OS Desktop.
Major issue: The Centro will not display all of my calendar data. It only displays entries that have a Repeat setting! I spent a L-O-N-G time with a Palm tech-support guy on Monday. All of the records are on the Centro - the count matches the Desktop, and the Centro reports that it has plenty of free space.
The Tech Support guy eventually became convinced that I had corrupted data, so he had me run the utility that checks for corrupted records.
In the Options box (Options tab) the "Check and repair any corrupted records" does nothing. This thing ran for HOURS and never produced any response. Subsequently, I created a brand-shiny-new Palm setup, with NO data in it, and asked it to check for corrupted records. It ran for a half hour doing NOTHING; I got bored and killed it. Then I started my own debugging. I spent 4 hours methodically testing things and I discovered that ... when the 32,767th record is added on the Centro, all of the other records (except those with Repeats) do not display. Deleting a record does not make them re-appear. So, I believe there is a bug in the Centro software - a 15-bit counter is overflowing (flipping bit 16 and going negative which not surprisingly upsets the Centro). Is this a known problem and is there an update I can get so that all of my data can come with me?
The Desktop software happily displays all 34,000+ events. However I had to go into the .mdb file with Access and delete several thousand records (my events from 1998-2002) so that the Centro will behave. I have kept the original Datebook.dat file so that I can force the Desktop to re-build the FULL .mdb whenever I get a fix for the Centro overflow bug.
Post relates to: Centro (AT&T)

I regards to the color categories, it is stated on the download page on the Palm website. You probably have installed Palm desktop directly from the CD which does not explain the differences.
In Palm desktop 6.2 the function to store the data in a different location is not available.
Regarding the calendar entries, you have probably exceeded the maximum number of records allowed on the device.
Here are a couple articles regarding this from the Palm website.
Click on the following link to the kb.palm.com webpage for the article regarding Record sizes and limits for organizer functions.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=19008
Click on the following link to the kb.palm.com webpage for the article regarding Maximum number of records the Palm™ handheld and Palm™ Desktop can store.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=24515
Were you instructed to use DBFixit by the Palm tech?
You will need to purge old records from your database.
Click on the following link to the kb.palm.com webpage for the article regarding Archiving handheld records on a desktop computer.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=34396
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/centro/centro/att/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

HREFTrack won't rename [ bug report ]

I'm trying to follow the Apple tutorial on creating HREF tracks in a quicktime Pro movie, but when I try to rename my Text Trac to HREFTrack and click enter, it renames back to Text Track and won't complete the change.
I'm very frustrated. This is the BIG reason I even purchased QTPro in the first place and now I'm only finding that at least a few QTPro users have this problem... there is no support phone number, no way to submit a bug report... AND if this is a bug, then it shouldnt' be listed that you can do this with QTPro if it won't do it.
(feeling a little cheated!)
I realize I might sound a bit nasty in my tone, but it's only because I've STRUGGLED to find an answer online, only to be rerouted to wrong pages, the feedback request didn't work because it said that I left a field blank that was filled in, so I couldn't submit feedback and I see that other people on this message board have this same problem that has gone unanswered.
In terms of a customer support, this is very poor on Apple's part. No one should have to go to this extent to get help on a software program that someone paid for... and it doesn't do what it was said it could do... AND there "seems" to be little to no help for paying customers.
So, yes, I'm frustrated. I just want it to do what I paid for it to do. Is that too much to ask?

Hi buddies,
My idea is to pop-up a web page while playback a .mov file.
I purchased a pro version key and followed the steps with QuickTime Player for windows available @ http://www.apple.com/quicktime/tutorials/hreftracks.html
Fron the above html,
Step 10
"In the Movie Properties window, choose the new text track. Rename the track HREFTrack exactly as shown (mixed upper and lower case, no space between HREF and Track)."
I am not able to rename Text Track to "HREFTrack". I wasted few hours blaming my box.
Please give me a solution to pop-up a web page while playback a .mov file.
Regards,
Vinu.P.k

Essential event viewer bugs with "Forwarded Events" log in Windows Server 2008 R2 and Windows 7

To my general experience, Windows event viewer is one of the most problematic, faulty management tools in the case of extensive use of its more sophisticated capabilities. The sole description as well as reproduction of some entangled failures would require
remarkable effort.
With the "Forwarded Events" log however, the situation becomes particularly worse in that even simple functionality fails and workarounds are difficult to find. That’s what I’ll describe here in order to share my experience with interested users.
For precision: I’ve extensively used event viewer on a German Windows Server 2008 R2 SP1 (Windows SBS 2011 Standard SP1). The bugs I found on that system, I could reproduce on a German Windows 7 Professional 64-Bit SP1, too.
Problem 1: Failure of even simple event filtering
To reproduce this problem, execute these steps on a test machine with any of the two OS mentioned above:
(i) To prepare log contents, do either of the following:
(a) populate some events to your local "Forwarded Events" log (most simply by subscribing events from other logs of the same machine; stop subscription if you have collected some events)
Or
(b) copy a non-empty log file "ForwardedEvents.evtx" from another machine (with any of the two OS mentioned above) to your test machine and open the file in event viewer.
(ii) Navigate to your "Forwarded Events" test log and open the filtering dialog. In the "Includes/Excludes Event IDs" field, type: 1-9000. Click OK.
(iii) Look at the results pane: Surprise, 0 Events! Do you really have no event IDs between 1 and 9000 in your test log?
(iv) Another example, if you have forwarded security events in your test log: Clear filter, if any previous filter is in place. Open the filtering dialog. In "Keywords" sub-dialog, choose "Audit Success". Click OK.
(v) Look at the results pane: Surprise, 0 Events! Do you really have no successful security monitoring events in your test log?
I’ll finish here. If you have a rich variety of events in your test log available, let your imagination run wild to test around. Finally include some simple manually created or modified XPath filters on the XML tab of the filtering dialog. I promise, you’ll
find a lot of additional strange results.
Problem 2: Cannot save manually selected events to .evtx file
Navigate to your "Forwarded Events" test log. In the results pane, select one or more events by highlighting them by mouse clicks. In context menu, choose "Save selected events". In the "save as" dialog, choose file type *.evtx
and save your file. Open the newly created file in event viewer. Result: Surprise, no events inside the new file!
Have more fun with forwarded events
Helmut

Did you mean that right click Forwarded Event and select "Filter Current Log..."? Since I can filter correct event vai the "Filter Current Log..." in my Lab environment.
Hi Justin,
yes, I mean "Filter Current Log ... " (in my German systems: "Aktuelles Protokoll filtern ... ").
What do you mean with "my Lab environment" exactly?
In the meantime, I performed additional tests. I copied the "ForwardedEvents.evtx" test file from Server 2008 R2 resp. Windows 7 to
(i) German Windows 8 Pro 64-Bit RTM
(ii) German Windows 8.1 Pro 64-Bit, up-to-date
in order to view and filter the file there.
Results: Same event viewer problem on Windows 8 RTM, but correct behavior on Windows 8.1!
Best regards, Helmut

Ical LION sends cancel event - MAJOR BUG

My default calender is set to my Office Exchange Server in Ical
Cal invite arrives via email and automatically sent to my exchange email address (they are using google cal)
     My Ical adds to my "home" calendar (bug 1 since I set the default calendar to my office)
     I Open the event and change cal to Exchange server and click ACCEPT
     Ical sends weird result to sender of the invite saying THEY canceled the meeting
     It either crashes my Ical or leaves it sent in the correct cal but never sends the ACCEPT only the cancel.
NOT GOOD ENOUGH APPLE.

I just created a test invitation and sent it from another account (not part of iCal) to myself. It was sent from a Hotmail account and showed up as an .ics-attachment to an email. Even after several minutes this event was not picked up by iCal, thus I clicked on the attachment and it opened in iCal. There I clicked on the "Get Info" and it shows the invitation assigned to my MobileMe calendar (not the default), but it also shows the invitees as active fields (i.e., I can change them) and it does not show the organizer at all. In other words, it makes the event appear as if it originated from my iCal and I was the organizer.
In my test case, moving the invite to a different calendar (either through the Calendar sub-menu or the Get-Info panel) caused a message pop-up titled "The event will be moved from the calendar on your Mac to the calendar on your “Exchange” account." --Note: in my earlier post, I did not get this pop-up. Thus I am concluding that I am not yet completely recreating the same conditions.
Unless the action is canceled, an email gets sent out cancelling the original event for all participants.
I will work on recreating the exact event.

IMovie 11 event rename fails with "Can't Move error" -5000

I finally found the answer to this but thought I'd post in case anyone else saw this and could not work it out.
I tried to rename an Event but the rename failed with this error
Move Failed:
This file could not be moved:
/Volumes/Data/iMovie Events.localized/Lib
(-5000)
I was not tryign to move anythign , jsut change the name from within iMovie events library.
It turns out it was a permissions issue.
The event had been created whiel logged in as the other user on the machine and we use a common 'Input data HDD'...
Filling up quick...just got two new 4GB HDD's on the way

Just to be clear, I followed the instructions at the link below to try and move the events to an external drive. The external drive is formatted per Apple's recommendation and is connected via Firewire:
http://support.apple.com/kb/PH2302

KMC Resource Eventing: Rename and display name/description

Hallo,
I'm wondering about the behavior of ResourceEvent.RENAME.
When a KMC resource is renamed, its 'old' properties can be accessed by ResourceEvent.PRE_RENAME. On ResourceEvent.RENAME, the new RID is propagated but not the new displayname and description. These are set afterwards on ResourceEvent.PROPERTY_SET. Why isn't this propagated before the RENAME event is thrown? I register with the broker in synchronous mode.
Kind regards,
Christian

Hi Christian, hi Helmut,
quite interesting thread, for I'm doing this just three weeks later.
Anyhow, one answer and one question:
Christian, you talked about the SET-Template. This should be relevant for updating content, not properties. Maybe as Helmut wrote, your use case (using some UI functionality) also updates the content together with the properties. But in general, PROPERTY_SET should be the right thing.
Helmut: I need, as Christian did, the old name of the display name as well as the new one. But there is no PRE_PROPERTY_SET!?!? How to access the old name? In my use case, probably there will no other event be thrown (when renaming a collaboration room; no content, no RID change).
Hope it helps & thanks in advance
Detlev

Photo events thumbnails bug

Hi, I recently bought an iPhone 4S and after syncing all my iPhoto photos and events the thumbnails are all messed up in the events view on my iPhone.
I really want to fix this as it is bugging me. If you have any ides please let me know.
I've tried erasing all pictures and re-syncing and nothing worked.

Mine too. Anyone have a clue how to fix this?

Mountain lion calendar smart event adding bug for 24h clock

I have checked it with Polish locale settings but problem should be everywhere when 24h clock is selected:
When adding event "alarm jutro o 5:00" (means: alarm tomorrow at 5:00) - Calendar app is adding alarm at 17:00 not 5:00. Seems to be bug.

Under System Preferences > Date & Time, click the "Clock" tab near the top and check "Use a 24-hour clock".

Group RCDC Event Handler Bug?

I have added a field in the Group RCDC in a Tab (grouping) called "Admin" and marked it as Required within the RCDC.
Now, if I were to take an existing group that has a Member Selection of "Criteria-Based" and change it to "Manual" and click "OK" without populating the "required" field in the other tab, I would be re-directed to
the field with the note "The required field cannot be empty" as expected. However, if I fill out the field and submit the request, I noticed it doesn't clear the underlying "Filter" attribute and the request fails with "Group validation
failed: Static group cannot update membership filter".
I believe this is related to the fact that the Group RCDC has a built-in event handler when the "Member Selection" changes. But doesn't modify the "Filter" attribute unless you go to the "Members" tab? Seems the even handler
is ignored or overridden by the event handler that checks for Required fields to be populated?
Anyone else run into this?

I have added a field in the Group RCDC in a Tab (grouping) called "Admin" and marked it as Required within the RCDC.
Now, if I were to take an existing group that has a Member Selection of "Criteria-Based" and change it to "Manual" and click "OK" without populating the "required" field in the other tab, I would be re-directed to
the field with the note "The required field cannot be empty" as expected. However, if I fill out the field and submit the request, I noticed it doesn't clear the underlying "Filter" attribute and the request fails with "Group validation
failed: Static group cannot update membership filter".
I believe this is related to the fact that the Group RCDC has a built-in event handler when the "Member Selection" changes. But doesn't modify the "Filter" attribute unless you go to the "Members" tab? Seems the even handler
is ignored or overridden by the event handler that checks for Required fields to be populated?
Anyone else run into this?

Folder Renaming Bug

Hello,
We have two (2 x 3 GHz Dual-Core Intel Xeon) machines running 10.4.9, networked with a server running Microsoft Windows Server 2003 5.2.3709 Service Pack 1 Build 3790. The Macs are set up as Admin, Managed Mobile user accounts. All work is stored on network file shares.
One of our machines displays strange behaviour when folders are created or moved, from the mac across the network, on any of the fileshares. These issues are-
1. When a new folder is created on any of the fileshares, from the mac, a duplicate folder automatically appears in the same directory of the fileshare. This file is only visible from the mac.
2. When a folder is moved from any directory of the fileshare to any other directory, the folder name changes to duplicate a folder name already within the new directory. File names within the moved folder and its duplicate are also affected.
We are extreamly busy at the moment and to reduce the risk of downtime I have been reluctant to run the 10.4.10 update.
Can anyone help?

certain characters cannot be used for folder or file naming on a mac. it gets confused and the usual pattern of behaviour is it then duplicates a folder or file name by the immediate one around it. the usual suspect that I can think of in folder or file names being cross platformed and that are carried over on networks might be something as simple as the folder name being a date. eg; 9/8/2007. the forward slash / is an illegal character for file or folder naming on a mac because it's system files depend on that character. try renaming folders and files without using chararcters and see if that fixes the problem.

Re-dating photos now does not re-date events. Bug?

Hi,
I have been progressing through all my old scanned negatives, importing them into iPhoto '11, organising them into 'events', and then re-dating them using Photos>Batch change...
This had been working perfectly until today. The re-dated photos automatically placed the events they were within in their correct chronological order.
But today, even though I am re-dating ALL the photos within an event, (I have double-checked), the events themselves stubbornly remain with the date value of the original files, which is the date the negatives were originally scanned of course.
When I do the batch changes I make sure that 'Modify original files' is ticked.
Yesterday I accepted an update to iPhoto '11 version 9.1.2 (605). Could this have anything to do with my problem? Has anyone else got the same problem after updating to version 9.1.2?
If this is likely to be the cause, is there any way of reverting to my previous version?

As well as the re-dating problem in the 9.1.2 update, I also found that they have messed up the scroll facility somehow.
Whenever I scrolled through a view in 9.1.2, be it events or photos, instead of scrolling relatively smoothly the view seems to suddenly jump. I found myself getting completely lost...
So, what with the scrolling problem, and having to do the workaround for the re-dating problem, I'm very unimpressed with 9.1.2. The only plus point it had, (that I found, anyway), was that the single-photo zoom facility was extended to all views and not just within the 'edit' one. The disadvantages far outweigh the advantages as far as I'm concerned.
I have now reverted back to version 9.1.1, and I can now get on with the job in hand far more effectively.

Using arrow key to move down Event list bug

1. I have my event window in List mode.
2. I'm moving down the list with the DOWN ARROW button.
3. I have a clip selected and the clip name turns blue.
4. I take the cursor and skim the clip preview at the top. FCP X makes the name of the clip gray instead of blue.
5. I press the DOWN ARROW button again.
6. FCP X selects an arbitrary clip and not the next clip in the list.
So just open up an event with a lot of clips in LIST VIEW and sort anyway you want, select a clip, skim the clip preview at the top, the clip name in the list becomes gray, then press DOWN ARROW multiple times and see it jump between what seems like arbitrary clips.
I can't figure out the logic of how it's selecting the clips as I press DOWN ARROW.
So what I have to do is skim the preview, then mouse down to the grayed out name and click on it with the mouse, then press DOWN ARROW, etc.
So, basically, the UP/DOWN ARROW buttons are useless in LIST VIEW because I might as well just click on the next clip with the mouse.
Thanks for your time.

Tom Wolsky wrote:
Yes, the clip goes gray. The down arrow takes me to the next clip in the list.
Thanks, Tom.
OK, so what I'm seeing is it sometimes works fine, other times it acts as I've described.
I noticed that when I change the sort from DURATION to NAME, etc., it seems to trigger the behavior I'm describing. See if changing events and then selecting, skimming, then changing the sort by clicking on the column triggers it for you.
This behavior happens with the event window in the main window or on my second monitor.
Thank you for your time, Tom.

Event 1001 Bug Check Windows 7 Ultimate 64-bit

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 1/17/2014 6:56:51 PM
Event ID: 1001
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: KT-PC
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000019 (0x0000000000000003, 0xfffff8a0245c2580, 0xfffff8a0245c2580, 0x73634946030c030c). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 011714-30997-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-17T23:56:51.000000000Z" />
<EventRecordID>389585</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>KT-PC</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">0x00000019 (0x0000000000000003, 0xfffff8a0245c2580, 0xfffff8a0245c2580, 0x73634946030c030c)</Data>
<Data Name="param2">C:\Windows\MEMORY.DMP</Data>
<Data Name="param3">011714-30997-01</Data>
</EventData>
</Event>

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to skydrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Event renaming bug?

Similar Messages

Maybe you are looking for