Event selection greyed out

I have a strange problem - I have been creating dynamic forms in Designer with a script on the layout:ready event for custom page numbering. Until now, this has worked fine, but a form created yesterday in the same way has all the event options greyed out, so I cannot add the scripts! Any ideas why that is. The form is set as dynamic, flows correctly and has been saved as a dynamic form.
Any help much appreciated.

You need to select a control on the form to get the events activated.
Thanks
Srini

Similar Messages

  • I use iphoto 8.1.2 on OSX 10.5.8. some of my events are greyed out, showing no images.

    As outlined briefly above quite a few of my events in iphoto have appeared 'greyed out' when ive restored them from the trash. I was trying to back up my iphoto library, with no proper knowledge, and I think this may have caused the problem. I dragged and dropped my original iphoto library into a non time machine external hard drive. I then went back to the original and sent the majority of photos to the iphoto trash (about 12 thousand photos). When I tried to delete them from the iphoto trash it wouldnt allow me to do it - something ive read is quite normal for that amount of photos.
    After this i read more about multiple iphoto libraries so decided to restore all these 'deleted' photos back to iphoto so i could sort things properly (im ultimately wanting to have one large iphoto library on my non time machine external hard drive, then have a smaller, more current, iphoto library on my internal hard drive).
    When i did this about half of my events were greyed out, and so were the images in the events. although the information assigned to the individual event, such as number of photos and event name were still correct and clearly showing. Why has this happened?
    My only thought is that when I tried to delete the photos from my iphoto trash initially this could have messed it up some how. The majority of events that have been affected are my older events, but even some brand new ones are greyed out too.
    I would realy apreciate any advis on this, the photos ive lost are very importat to me so im fretting alot.
    Thankyou in advance
    JAB

    I did try that yes, and it had resorted to the same version that was on my internal hard drive. Im not sure if ive done something wrong at some point in the past while trying to sort it all out - the situation suggests I have?
    Essentially the two iphoto libraries I have are the same (one version now just has my attempt at restoring the files from iphoto trash, the other version has the photos still in iphoto trash).
    Im at a loss knowing where these files have gone/ why i cant access them if the info for those files is still showing?
    Thanks for your continued help!
    JAB

  • Trying to sync selected (greyed out) contacts to my replacement 4s.  Get error messages - computer not setup to sync - override or OK.  OK - session could not start.  How do I fix?

    I have a new replacement 4s.  I am trying to set it up.  I hate iCloud but need it to sync my calendar to my phone.  I mistakenly set it up to sync Contacts too and found out it synced ALL contacts which I do NOT want.  I used to use iTunes to sync only selected contact folders (one I call Sync).  Others are too sensitive to have on my phone.  So I turned off "where is my iPhone", and turned off "Contacts" on iCloud.  It said it would delete all my contacts on my phone the next time I sync (using iTunes).  So I try to sync my Contacts using iTunes and find that under "Info" on the device tabs my only possible selection is ALL contacts with the "Selected" button greyed out.  But even leaving all checked, I get the message "iTunes cannot sync information with the iPhone because syncing has been disabled on this computer (my Mac).  Do you want to enable syncing?"  I hit the button "Enable syncing" and I get the error message "Syncing cannot be enabled on this computer"  with "Override" and "OK" my choices.  If I select "OK" I get the error message "iTunes could not sync information to the iPhone (Name) because a sync session could not be started".  I can sync my music and my apps but get this stupid message otherwise.  What gives and I do I fix this?  Thanks

    Actually I can't sync anything - no music, photos, etc.  And it tries to start syncing as soon as I plug in my iphone and itunes is open.  It ends "sync" but hasn't done anything.  I have tried deleting lockdown files (per "solution" found here).  I have deleted all my backups (per other "solutions").  I have restored my iphone 2x.  I have done soft boots of my iphone.  My macbookpro 10.9.3.  iphone 7.1.1.  iTunes 11.2.2 (3). 

  • Edit Functions, including Trim to Selection, Greyed Out

    I have Quicktime Pro but despite this the menu items Cut, Copy, Paste, Delete and Trim to Selection, all under Edit, are always greyed out. I have tried setting a selection using In and Out markers and still none of those functions works. All other aspects of Pro do work, however. Is there something I'm doing wrong? Thanks.

    You're doing nothing "wrong".
    QuickTime Pro can not edit files that are in MPEG (1 or 2) formats.
    You'll need third party software to convert the files. MPEG Streamclip is one for the Mac OS.

  • Why is Preview selection greyed out in Font Book?

    I have a problem with Font Book — not the first.
    All my fonts seem to be listed fine, but when I go to the Preview menu, which is currently on the default selection of 'Sample', I cannot select either of the other two options. They are both greyed out. As is 'Show Font Info'. And the related buttons on the menu bar of the Font Book window are also greyed out.
    Anyone any idea what the problem might be. Do I have to bin the prefs and start building my font collections yet again?
    Grrrr.

    You need to have either Adobe Reader or Adobe Acrobat installed to use the Preview PDF feautre. Additionally, the preview pdf feature uses the Internet Explorer plugin, so make sure that is installed and functioning properly.

  • Why is Merge Selected greyed out?

      I am working with a file with many many sub layers and illustrator is running really slow and keeps crashing. I want to merge many of the sublayers into one layer to save space and help simplify the file, But after I select the layers the Merge Selected option under the layers menu is still greyed out and unable to be used. Anyone know how to get merge selected to work? Or any other way to merge layers?

    You're not going to like this and your going to respond with a WHAT!? But here goes, the sub layers are already by definition merged they are contain within a top level layer.
    There can be no merging since they already are merged.
    Top level layers on the other hand cane be along with their sub layers.
    That's it.
    I know what you're thinking what the…!

  • SCUM Selection Greyed Out

    Hi all,
    I am trying to enable settings in which will allow role assignment in BOTH CUA and child system. Unfortunately, the selection for "Everywhere" is greyed out in SCUA --> Role/Profile tab. In my work environment, there is a need to allow role assignment in both master and child systems. How o I go with this? Couldn't found anything in Notes & SCN. Thank you for all your feedback!

    There are a few exceptions in the user APIs for call backs to the CUA even if redistribution and local SCUM is not set. There are also two passive CUA tolerances for CREATE1 and DELETE which redistribute based on authorizations and not CUA settings.
    I think we are getting warmer here...
    My explanation -> the user was deleted but still had address data and PPOME assignments. PFUD was / is not running. Then the user ID was recreated (intended for a different person?) and saving in SU01 runs PFUD in their release for indirect assignments as well. The user ID is still mapped in Infotype 0105 and reconnects to the HR-OM role which the "person" still has.
    The best way to avoid this is by never deleting user IDs (hard to avoid in CUA) and ensuring unique names and authorizing the redistribution user centrally to only do text comparisons.
    In the special case of SMSY the user names follow a naming convention, so if CUA is not on the SOLMAN logical system then I authorize the SOLMAN callback user (only) as if it is a client to send the user to the SOLMAN to than the system can be connected. The roles can then either be added manually or via PPOME (which is perhaps what was attempted here).
    Cheers,
    Julius

  • Fine Art paper selection greyed out.

    I am using PS5 with a MAcBook Pro (OS_X 10.7.5) with an Epson 3880 printer. The paper selection menu greys out Fine Art papers. I need to use those papers. Don't know how to fix this. Need help.

    The selection of media type is tied to the paper feed path...some media such as fine art watercolor needs to be maunally fed. Once you select a manual feed path you should be able to access the fine art paper selections.

  • Trim to selection greyed out

    Hello,
    I have a slideshow of a hundred or so photos. I'm trying to shorten some of the photos to specific lengths to match with background music. I've been trying to do this by selecting an individual clip (so the yellow border appears around the clip) and then moving the slider so that the clip is shorter. When I try to trim it, however, "Trim to Selection (Command-B)" is greyed out. Can someone point me in the right direction?
    Thanks,
    --Melissa

    You can change between seconds:tenths of seconds and seconds:frames in iMovie/Preferences.
    You can move the end of the clip with video, because you are picking a frame. In a still, there is only one frame....and a duration.
    One idea: Is your music at a constant tempo? You can count the beats per minute, and translate that into the duration you need for each picture.

  • Online Certification Authority "Select" greyed out IIS with 2008 R2 PKI

    I have built a two tier 2008 R2 PKI with an offline Root CA and an online issuing CA. The domain is a 2008 funtional level.
    From a 2008 IIS server on the same domain, I have tried to Create a "Domain Certificate" so I can implement an internally self signed web server. On the first screen, I am able to enter all the details under "Distinguished Name Properties", but when I go
    to the next screen, "Online Certificate Authority", the Select button is greyed  out next to "specify Online Certifcation Authority" . The only online articles I have found say this indicates that something is wrong with the CA,
    but not what.
    I have checked everything with PKIview and the CA looks healthy. I have also run the BPA for certifcate services and the BPA for DNS and no problems are shown.
    I have checked that the certifcate template for Webservers I have created and looks okay and have been able to manually send a web server request to it on the CA and install it on the webserver.
    I am also able to successfully autoenrol user and machine certifcates within the domain and use this for 802.1x Wireless authentication.
    Any pointers in would be appreciated
    Thanks
    Iain

    Open Certification Authorities MMC snap-in, expand root node and select Certificate Templates (this node is available on Enterprise CAs only). Click Actions -> All Tasks -> New -> Certificate template to issue.
    Note that IIS server *machine* account must have Read and Enroll permissions on this template.
    http://en-us.sysadmins.lv

  • Ichat selections greyed out.

    I am starting using ichat. Thought I had it set up properly but when I try to add buddies as instructed the all selections in the buddies menu are greyed out.
    I tried this suggestion from a discussion forum:
    choose iChat > Preferences, and then click Accounts.Close iChat.
    Go to Library -> Preferences and find the com.apple.iChat files. Delete all of them. Start up iChat again...
    It didn't work. Almost all sugestions in all the menues are greyed out, including preferences.
    Any ideas?

    With the AIM Buddy List there are issues if you Add a Buddy and add his Real Name (as if to give him an Address Book Entry) when they are already in the Address Book.
    Is that what you are doing here ?
    Also go to iChat > Preferences > Accounts and for the Screen name in Question go to the Security tab and check the Block List has not go this Buddy and he is in Any Allow List you are using.
    On the file sending front is this to a Jabber Server that allows files ending ?
    Is it the same Buddy even ?
    Or is it more general ?
    7:45 PM Thursday; June 26, 2008

  • LOV selection greyed out

    I have a LOV set up on a form - but the description returned and displayed is greyed out, which makes it almost invisible.
    It seems to be an Internet Explorer issue as firefox displays ok.
    Is there a way of making the font bold for the returned value from a LOV?
    I am using the 24. cloudy theme if that makes a difference.
    Cheers,

    Depends.. What version of APEX are you using? Version of IE? More info you provide, the better help others can provide..
    Thank you,
    Tony Miller
    Ruckersville, VA

  • Why is my filter selection greyed out

    What cause the filters tap and everything under to be greyed out

    Question has no meaning without program name... Photoshop, Acrobat, ???

  • Variable Designer (custom dimension and members selection greyed out)

    Dear All,
    I want to crate a variable for business rule using Variable designer for a specific plan type (for example plan1)
    Entered the following
    Name = Test
    Type = Member
    Value = Dimension (when i click to open the dimensions it show nothing)  !!!
    Previously it was working fine, my functional mate made some changes it dimension members of account like ( Account type , Data storage etc)
    Your valuable suggestions are needed to solve the issue,
    Regards

    I wrote something on making a custom dimension variable in Global, maybe you can try doing that.
    Oracle - Hyperion Labs......: Variable limitations in Calc Manager 1
    Regards
    Celvin
    http://www.orahyplabs.com

  • Imported Events greyed out after import

    Converted a CD with Handbrake to mpeg-4 without problem. Imported into iMovie and initially able to view Event clips and active frame window. Then, for reasons unclearn, all Events are greyed out, altho active frame window is displayed and will "play". Anyone know what happened? First time user of iMovie so may be missing a critical step?
    Thanks for any guidance. Hvee

    Thanks for the tips, but none of these items is the issue. I am using an external 300GB connected via FW 800. The drive has maybe 20GB of stuff on it, so that is not an issue. I can't figure the issue out, because I did a little test. I took some video I captured using the El Gato device, exported as HD 720P. Using iMovie on the Mac Mini, iMovie won't see it on the Mac Mini. I took the same exported version as above and put it on my MBP (2.16GHz, 3GB RAM). Imported it into iMovie in the same procedure as I did on the Mini. Except this time on the laptop, iMovie sees it. Something somewhere on th eMini isn't working right. I have tried repairing disc permissions without luck, so I guess I am down to wiping and reinstalling all my software on the Mini. Hopefully that will work. Any thoughts?

Maybe you are looking for