Event slider change
hello,
i searched for an example but found nothing.
i want to react if the range of a slider changes.
the only event is the value change event, but this event reacts on value changing and not range changing.
best regards
markus
Attachments:
Slider.JPG 10 KB
You can try doing the attached. Make a separate loop that
monitors the Range properties of the slider and generate a value change
event when one of the Range properties change. If you have a
Timeout event in your event structure, you could put the code in there
instead of a separate loop.
Randall Pursley
Attachments:
Slider.bmp 2248 KB
Similar Messages
-
[BUG] iCal reverts Google Calender recurring events when changed.
When in Apple Calendar and drag a recurring event to a new time and the pop-up asks if I want to do this for this event or all future events and choose only this event it changes, then moments later it reverts back to the original time. These events were originally created on Google Calendar.
It seems that Google Calendar is taking preference over Apple Calandar and not updating or acknowledging Apple Calandar's comand to change.
Has anyone seen this happen or have a recommended fix?https://developer.apple.com/bugreporter/
You can also try http://www.apple.com/feedback/macosx.html but I don't think that's as useful. -
How do i get my events to change colors when i add new ones in my calendar
How do I get my events to change colors when I add a new event in my calendar?
When you add an event and you see the heading "Calendar", do you see a name to the right of it such as "Work"? If you tap on the heading "Calendar" does it show you a list of calendars?
I'm basing this on my experience using iCal on a Mac to sync with my iPad. I created a number of calendars on the Mac and assigned them different colors. Those appear on my iPad. I don't know how to create additional calendars on the iPad alone - I must create them in iCal or MobileMe then they show up on the iPad. Are you using a Mac or MobileMe? -
Raise event on Change document STUE
Hi,
when I add a document to a doc. structure in tx. CV12, a change document is created with change object STUE. When I try to raise an event on this document structure, i get an error "Key for change doc. object STUE and business object type DRAW are incompatible". I get this, no matter what Business object i try to use.
I have tried to make a new business object with the key from STUZ, which should be the leading table in the change document.
Still i get no events, when changing the document structure. Any ideas, or other solutions?
Kind regards
MikkelHi Mikkel,
If your key matches the table STUZ's key fields exactly then it should work. In other words two key fields STLTY STLNR. If not or if this is not what you want then you have two options:
1. Use SWED to define the key for STUE to have a structure DRAW. You will need to create and enter a FM to read/convert the changedoc data and supply the correct key for your DRAW object at runtime since it's differetn from STUZ.
2. As above, but try explicitly defining the structure for your custom object. Alternatively a dummy FM in here is useful to try to debug what's going on.
Hope that helps,
Mike -
Event Data Change triggering process hangs in the process chain
Hi,
In a daily running process chain we have an event data change trigger for broadcast setting which goes to long running status very often and ultimately we have to cancel the job in precalcserver and manually execute the reports based on it. This step fails very often and rarely it gets executed in the chain with a green status. I want to know the reason for the failure and the solution for permanent fix.
On digging through the respective logs thru SLG1 I found the following error messages for the same. Please find it below if it can help u in analysis
Any inputs will be a great help!!
Thanks
Kavyait's related to precal server, I guess it failed due to lack of memory or setting issue.
Please do following
1 Clear all precal server pendings
2 After this, restart the server.
3 Execute again. -
Event Data Change step- Failure
Hi All,
I have a failure in event data change process in a process chain.
It has identified 2 packages for change.
One package has successfully been done.
While processing of second package, the job BCAST**** failed as logon to BW system with user ID specified failed.
I know that the user-id does not exist., but am not able to find out of where the to change the user id for the job BCAST*** to run successfull.
when i click displaying messages, it shows
Step 001 started (program RSPROCESS, variant &0000001212711, user ID BWEXTRACT)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job
BIBCAST4AN61630VW21F4LTLVP2QED68 with ID 08254800
The job BIBCAST4AN61630VW21F4LTLVP2QED68 failed as logon was not possible.
Please suggestHai ,
Its right you get the owner name in the table after changing the right user id there .
In broadcast setting screen itself say for EX broadcast email
below you give the recepient address
after that you have the Authorization user box where you can directly change to right id if you have the proper authorization attached to your user id .Remmember to save then schedule & execute when you trigger for first time.
This step is related to the role attached to your user access ask basis guy or instead of transporting from development do the broadcast setting directly in production with right EP access.
hope it would sove your issue. -
Event data change is process chain
Hi guys,
i got a problem with my Event data change in my process chain which gives me the error
"Background management: timeout or termination of job BCAST486IO7Q8PXOXKE9OV9HOSCGTO"
when you check in the background it says the job is finsihed
can any one help me out on this how is fix this
points will be assigned
cheers
dpDear DP,
i think u have to repair or repeat the chain.... by clicking the context menu
Regards
venu -
Mouse wheel scroll event ON CHANGE?
Colleagues,
Very simple question:
How to get mouse wheel scrolling event on change? Without polling?
Is Acquire Input Data.vi the only way to get it?
Thank you in advance,
Andrey.Hi Andrey,
i think it's not build in. I wrote some years ago the attched vi's, because i also miss this feature. These vi's use the "acquire input data.vi", but it only polls if a control has registered for it.
Hope it helps.
Mike
Attachments:
ScrollEvent_LV71.zip 461 KB -
In the last week when changing test notes in Outlook appointments or all day events, the changes appear on my PC, Iphone & Ipad, but when I print my calendar they do not print. I get the old text or deleted text from the printer copy of my calendar. What is going on?
Thanks Sig. The information is here: Anything useful stand out?
Battery Information:
Model Information:
Serial Number: 9G1130CJVD3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 0002
Cell Revision: 0158
Charge Information:
Charge Remaining (mAh): 5663
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 5663
Health Information:
Cycle Count: 59
Condition: Normal
Battery Installed: Yes
Amperage (mA): 261
Voltage (mV): 12574
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00262704
Charging: No -
Hi Gurus,
I am trying to include Event data changes in Process chain and as soon as data load completes want trigger a report with broadcast settings. When i execute process chain, Chain is failing at Event data changes process type with below error.
<i><i>Error log:
Java system error: call FM RSRD_X_PRODUCE_PROXY to ProgId BP1TULAP424_PORTAL_WSH on host BP1TULAP424 with SSO not authorized: Missing Password
Message no. RSBOLAP018
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.</i></i>
Am i missing some step, i already have Help SAP link, But all steps defined in the process are configured already. Any help greatly appreciated.
Best Regards,
Reddy.Hi,
Have you checked the authorization for scheduling the broadcaster??
Check the below authorization object ..
S_RS_BCS :
(RS_OBJTYPE )ObjectType: Query/Template/Workbook
(RS_OBJID )ObjectID : QueryID/TemplateID/WorkbookID
(RS_EVTYPE)EventType : DataChange or Timepoint
(RS_EVID )EventID : Infoprovider or Timepoint name
are you sending anyworkbook through broadcaster? if so, you have to install precalculation server..
Regards,
Siva. -
How to catch the event for change dropdown value in alv
it has a column output by dropdown in alv. the dropdown type cl_salv_wd_uie_dropdown_by_idx.
now the problem is if change the dropdown value, i want to catch the event to change another column value.
how can i do it?This part contains other ALV initialization code
*... init ColumnSettings
DATA:
lr_column_settings TYPE REF TO if_salv_wd_column_settings.
lr_column_settings ?= wd_this->r_table.
DATA:
lt_columns TYPE salv_wd_t_column_ref.
lt_columns = lr_column_settings->get_columns( ).
DATA:
ls_column TYPE salv_wd_s_column_ref,
lr_col_header TYPE REF TO cl_salv_wd_column_header,
l_tooltip TYPE string.
LOOP AT lt_columns INTO ls_column.
CASE ls_column-id.
WHEN 'PLANETYPE'.
DATA:
lr_drdn_by_key TYPE REF TO cl_salv_wd_uie_dropdown_by_key.
CREATE OBJECT lr_drdn_by_key
EXPORTING
selected_key_fieldname = ls_column-id.
lr_drdn_by_key->set_key_visible( abap_true ).
ls_column-r_column->set_cell_editor( lr_drdn_by_key ).
WHEN OTHERS.
ENDCASE.
ENDLOOP.
DATA:
node_info TYPE REF TO if_wd_context_node_info,
lt_valueset TYPE STANDARD TABLE OF wdr_context_attr_value,
l_value TYPE wdr_context_attr_value.
node_info = wd_context->get_node_info( ).
node_info = node_info->get_child_node( 'FLIGHT_INFO' ).
data : lt_sflight type STANDARD TABLE OF sflight,
ls_sflight like LINE OF lt_sflight.
SELECT * from sflight into TABLE lt_sflight.
LOOP at lt_sflight into ls_sflight.
l_value-value = ls_sflight-planetype.
l_value-text = ls_sflight-planetype.
INSERT l_value into TABLE lt_valueset.
ENDLOOP.
node_info->set_attribute_value_set(
name = 'PLANETYPE'
value_set = lt_valueset ). -
How to get slide change without a noise like a camera shot?
I have imported a PP2013 slideshow into CP 8.
The animation is working correct.
But when the slide changes to the next one,
there is a noise lik a camera shot.
Where can I eliminate that,
ThanksHi Manoj,
Correct, when you query the CMS database it will return the info for the object and not the source.
In code you can use this for Crystal Reports:
reportClientDocument.SummaryInfo.( multiple values )
This is the info saved with the RPT file, you can also use Windows File API's to get the same info.
For WEBI and DESKI doc's it does not keep that info in the file system. You may want to look at the file system properties in the FRS to see if any info is kept as it is in RPT files but we ahve no API to get the info.
Thank you
Don -
Revision: 12435
Revision: 12435
Author: [email protected]
Date: 2009-12-03 07:26:54 -0800 (Thu, 03 Dec 2009)
Log Message:
Followup to the recent event dispatching change. As it turns out we do require capture phase listeners on both FlexEvent.MOVE and FlexEvent.RESIZE. Will make the change to always dispatch these event types but if it proves too much of a performance loss (as measured by our performance suite), we will find a way to work around the need for capturing. Currently UIComponent listens for MOVE,RESIZE that it may update the focus rectangle. DataGrid listens for RESIZE globally to dismiss any active item renderers.
QE notes: None
Doc notes: None
Bugs: SDK-24504
Reviewer: Alex
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24504
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as -
Show-through image at slide change
I've placed a white image on part of a slide background to
cover up part of the original image, and then embedded the white
image into the background. It seems to be fine while I'm in edit
mode. I've done this with several slides. When I run the movie,
however, in some cases a bit of the old background (one or two
rectangular portions) will appear very briefly when the slides
change. Thus when the movie runs, one sees a second or two of dark
areas on the white background. I'm desperately in need of a
solution.
Thanks!Hi katwebwitch
Nice handle by the way. You might want to try the following:
Create a new blank slide after one of your dodgy slides
Copy Background from dodgy slide and paste as backgrounf to
new slide
Use CTRL A to select all objects on dodgy slide and
copy/paste to new slide
Delete dodgy slide
Rinse & repeat for all dodgies
Please let me know if this works for you!
Andrew -
Coding for event "status change" in opportunity
Hello,
i need to process own coding if an opportunity was changed to status "lost".
How would you realize this? Where do i find a god point to add this own coding which shall be processed on status change?
Thank you
Best regards
ManfredHi.
It's very simple.
You create your function module using the same interface that another ones in this transaction.
Pick up an example, for instance the entry:
BUS2000111 | end of document processing (50) | priority: 40 | object STATUS | Event: after change | Atribute: <*> | function module: CRM_OPPORT_H_PROB_SET_EC
Use the same interface for your function module:
FUNCTION CRM_OPPORT_H_PROB_SET_EC.
""Local Interface:
*" IMPORTING
*" REFERENCE(IV_OBJECT_NAME) TYPE CRMT_OBJECT_NAME
*" REFERENCE(IV_EVENT_EXETIME) TYPE CRMT_EVENT_EXETIME
*" REFERENCE(IV_EVENT) TYPE CRMT_EVENT
*" REFERENCE(IV_ATTRIBUT) TYPE CRMT_EVENT OPTIONAL
*" REFERENCE(IV_HEADER_GUID) TYPE CRMT_OBJECT_GUID OPTIONAL
*" REFERENCE(IV_STRVAL_OLD) TYPE ANY OPTIONAL
*" REFERENCE(IV_STRVAL_NEW) TYPE ANY OPTIONAL
All these parameters will going to be updated with current info while you are creating your opportunity document.
In IV_STRVAL_OLD you will find info about the previous status (which is the object assigned), and in IV_STRVAL_NEW you will find the info about the new status that was assigned in the opportunity document.
So what you have to do is:
1 - create a Z function module with this same interface.
2 - Assign it to object STATUS_H, on CRMV_OBJECT_FUNC view using SM30 transaction. Note: I am just not sure if you must use object STATUS_H or STATUS.
3 - Create the event that must be:
BUS2000111 | 1 - Imediatelly | Priority: 99 for instance | object: STATUS_H or STATUS | event: AFTER_CHANGE | Atribute <*> | your function module | check for function on header | callback: empty
This is better than use the ORDER_SAVE badi because it executes your function module as soon as you change the status.
I guess that using the CRM_ORDER_STATUS badi as it was sugested is also a good option.
Regards.
Susana Messias
Maybe you are looking for
-
Hi, I work for a small business (10 people) and we wish to replace exchange 5.5 with Messaging Server as part of a move over to SUN. Can anyone give me an idea of the server I should look at, will a V100 do the job or do I need something more meaty?
-
Best practice on creating composite services
Good afternoon, experts. I was wondering what would be the recommended way to create a new enterprise service that is basically the orchestration of other enterprise services, for example, already provided by business suite. I guess I can model the o
-
Taking snapshot of oracle tables to sql server using transactional replication is taking a long time
Hi All, I am trying to replicate around 200 oracle tables onto sql server using transaction replication and it taking a long time i.e the initial snapshot is taking more than 24 hrs and it still going on. Is there any way to replicate those these tab
-
Where can I download a good flash player for my Iphone?
You know to play videos like on zshare and what not.
-
Stripping HTML Tags from a String
What's the best way to remove html tags from a string (i.e. user input)?