Event times incorrect

All the times in my event start and end at 8 after the hour, why?

I figured it out. iCal recognized the international time format that is found under System Preferences.

Similar Messages

ICal event times are incorrect when importing to iPhone.

For some reason, although iPhone imports events from iCal, the times for the events are incorrect! This is extremely problematic. Any suggestions on a fix? i am using Leopard 10.5.1, MacPro, and have the 8GB version of the iPhone.

you may want to check your time settings on your macpro first: system preference>date&time>time zone... make sure you have the right time zone and city, then in system preference>date&time>date&time... check "set date & time automatically".
then in ical: ical>preferences>advanced, make sure you have "Turn on time zone support" selected.
finally on the iphone: settings>general>date&time, make sure you have time zone support selected and the right time zone/city.
hope this helps.

How do I correct the Event time stamp in iPhoto?

When I updated my iMac to Lion, the Events in iPhoto are no longer sequenced by time correclty. The incorrectly sequenced Events have the wrong time / data stamp. How do I edit the Event time/date stamp to correct the problem?

Hi LarryHN,
The version of iPhoto is 8.1.2. I found your workaround on other strings, and tried it, to no avail. This issue has happened to three of my Event folders -- all from the same three-week trip. I had each day separated into different events and named consecutively. At some point, I uploaded all those photos to photobucket, and I believe the three troublesome Events perhaps were corrupted in some way after that upload? Regardless, I can't seem to fix it. All of the photos have the correct date (for example, in one Event, all photos are dated 12/25/11). However the date range on the Event is 12/31/09-1/7/12. So, those three Events keep getting sorted out of sequence.
I opened one of the Events, highlighted one photo and selected Create Event. That new photo became a new Event. I re-named it, and dragged all the photos from the old Event into the new Event. ...Unfortunately, the new Event still has the weird Date Range on it?
Any ideas?

ICal events are incorrect by one hour

I am using the Google Calendar and have an issue with the transfer of data from IPhone 3Gs to my IMac. If I place an event time on the Iphone calendar, this event gets transferred incorrectly to the IMac by one hour earlier. My IPad calendar transfers the timed event correctly to the IMac, but incorrectly to the IPhone. When going from IPad to IPhone the time on the IPhone is one hour later than it should be. The net result is a very confusing Calendar.

Today I created (3) All Day Events on my iPhone 4S to represent upcoming vacation days for Nov 21, 22, and 23. After sync, Outlook shows correct All-day events for 21 and 22. The All-day event for 23 is missing and displayed on Nov 24. This is a direct sync (wireless) and no Exchange server is involved. Any ideas? I see similar posts that go back to last year and iOS4. I would at least like to know if Apple is aware of this, or is it just my phone.

I am using iCal 8.0 and I don't know how to include event times along side the event in the monthly view. help. :)

I am using iCal Version 8.0 (2026)
I have read through responses to a similar question as I am posing, but the recommendations that I've found don't seem to be in the iCal preferences/ general tab.
Two great solutions that don't seem to be in my preferences winder are:
1. A respondent recommended checking the box 'show event times' on the general/ preferences tab, but that box does not appear in my window
2. A second response i found recommended that 'I check box for 'Show time in Month view.' in Under General/ preferences, but that option is not appear either.
Any other thoughts please

The grouped yellow pages are a Section (Chapter).
If you have logical divisions within your documents that fall on page boundaries, do the sensible thing and actually divide them with:
Menu > Insert > Section Break
…where you want the separation. Both before and after.
Moving or removing individual pages is like ripping pages out of a book and/or reshuffling them. It makes sense to relocate or remove entire sections, which are pages connected by their content, but not the individual pages within those that have continuing text both before and after them.
Peter

What happened to event times in the monthly calendar?

I upgraded (not really) to Mavericks and there are numerous issues; mail showing headers and no content, safari pages open completely jumbled and an essential calendar feature, event time in the month view, is gone.
Apple seems to be dumbing down it's systems for personal use while flipping the bird to corporate users.

Hey there,
You can get the times to appear in regular (not full screen) view as well - just grab the edge of the calendar and drag it out to the left or right a bit; the times appear automatically at a certain window size.
from here:
https://discussions.apple.com/message/23735911#23735911
cheers,
AT

Help: event times not printing in month view

... and yes, I have checked "show time in month view" in preferences, and the event times display on the screen. But on the monthly printout, the times do not appear, only ellipses where the time should be. There should be plenty of space for the information to print, there is white space both at the end of the event line and in the day box. But no times show up at all.
System data: Mac Mini, OS X 10.4.2, iCal 2.0.3 (1055), Brother MFC 7820N printer.
This is really awful... I just switched my wife over to the Mac Mini, and calendaring is a big part of what she needs. And she uses month views a lot. If I can't fix this, she'll probably throw the Mac Mini back in my face and I'll be sleeping on the couch. Yes, she cares that much about times printing in month views.
Mac Mini Mac OS X (10.4.3)

I don't know whether this a "solution" or a work-around, but I did find a way to resolve this problem. I recently started using iCal by transferring appointments from a BlackBerry using the BlackBerry PocketMac software. Although all of the appointment times appeared on the monthly calendar, most of the appointment times were replaced by ellipses when the monthly calendar was printed. It turns out that the times would print only after re-entering the appointment manually. This had to be done completely from scratch, i.e., not by editing the original appointment, or by cutting and pasting the appointment back into the calendar. This is a complete pain, but seems to work. I'd love to hear a better solution...

Is there a way to get event times to show up in monthly view on iCal 7? There no longer is a box in the preferences to show the times.

Prior to upgrading to Os X Maverick, I could see the times of all scheduled events on the month view (there was a check box in the iCal options to show the event times). After upgrading, the times no longer show up and I don't see an option to change it. Was this an oversight? It certainly is not an upgrade over the previous version. It was very helpful to be able to glance at the calender to see the scheduled times rather than having to click on each individual event.

Sorry. Only after posting did I see that this question has been asked already and the answer given. Please ignore this post.

Google calendar event times are shown as -1h

Summary:
When I create a new event in the built in WP8 calendar app to a Google calendar the time of the event is being displayed as one hour earlier.
Steps to reproduce:
Create a new event in calendar. Choose one of the Google calendars configured (I have two configured in my phone). Set time as 2013/07/17 16:00. Save the event.
Expected behavior:
The event time in the agenda view is shown as 2013/07/17 16:00.
Observed behavior:
The event time in the agenda view is shown as 2013/07/17 16:00 for a few seconds. It then automatically changes to 2013/07/17 15:00.
Other notes:
I have two Google calendars configured. I can observe the same misbehavior on both.
I also have a Microsoft (@hotmail.com) calendar configured. This works as expected.
When I log into my Google calendar using a web browser, the time is shown as expected.
When I use a third party calendar (Chronos) and sync my Google account directly, the time is shown as expected.
When I use a third party calendar (Chronos) and use it simply as an interface to the built in WP calendar the time is off again showing 2013/07/17 15:00.
The timezone on my WP is set to (UTC) London.
I started noticing this perhaps a week ago. It was working as expected before.
Phone model is Nokia Lumia 925
Phone OS version is 8.0.10327.77
Notes 1-6 suggests to me that the internal calendaring module in WP8 fails to recognize DST (daylight saving time) in timezone (UTC) London or misinterprets relevant information fields on Google calendar objects.
Note 7 suggests to me that this is related to an update to my WP8 phone or a change in Google calendar API.
Any help is much appreciated, this is driving me rather nuts.
Thanks,
Kaarel

Further investigation reveals this only happens when the event is created from within WP native calendar app and disappears when I make an edit to the event in any other calendar client including Google web. So a more appropriate description of the problem would be:
"Native calendar app keeps subtracting 1h off a Google calendar event on EVERY edit"
Create an event at 2013/07/17 15:00 in WP native calendar app. Result: Event shows as 2013/07/17 15:00 in the calendar app for a few seconds, then updates itself to 2013/07/17 14:00.
Edit the event title and save in WP native calendar app. Event time moves by -1h again to 2013/07/17 13:00.
Edit the event title in Google web calendar.
Subsequent edits in WP native calendar do not mess up the time any longer. If I fix the time to what I originally intended (2013/07/17 15:00) in WP native calendar app, it stays there and shows correctly in all previously mentioned calendar viewers.
I just learned that Lumia 925 was released with GDR2 update pre-installed. This update is only now being made generally available. If the issue is secific to the CalDAV implementation in GDR2 rather than specific to my phone only, this would make a lot of angry people. I hope I'm wrong on this though as it's an extremely frustrating problem.

Change standard view: remove event time

In iCal, a lot of visual space is wasted listing the time of an event. Fortunately, the time is unlisted in some cases (e.g., a half hour event in 'week' view), but for 1 hour events or more, the view of the event description is occluded by the start time. This time listing is redundant and unnecessary, since it is also indicated and easily visible to the left of the day columns in 'week' view, for example. Is there a way to remove the time? Any suggested workarounds so that we can see more of our event descriptions at a quick glance?
thanks in advance.

this is true, but i'm most interested in turning off times in 'week view', since times are already listed via the grid on which events lie. it sounds like a second radio button in Preferences>General should be added, called "Show/Hide event times in week view".
apple, are you listening?

Event time is wrong in ical

I just upgraded my MacBook to OSX Mountain Lion, but noticed an event "time" in iCal was wrong when synced with my iPhone 3gs. What's up??

Check Date and Time prefs on your laptop. Is the time correct, and are both devices using the same time zone?

ICal event times not in sync

Maybe this has been answered but I couldn't find anything on a search...
so my iCal on my computer and my iPhone iCal aren't syncing event times correctly. For instance I'll have an event on computer iCal at say, Friday 1pm but on iPhone iCal it says 6pm. All of the events have the wrong times on the iPhone.
I've reset my iSync history and that did not fix the problem. I've "Replaced information on this iPhone" and that didn't work either. Currently I sync my Entourage calendar to iCal and that works fine. But again when I then sync iCal to my iPhone it screws up all of the dates.
Any ideas why?

figured it out. it was a time zone syncing problem.

ICal will not display correct "event" times

Have iMac (21.5-inch, Late 2012), OS X Yosemite (10.10 ) and iCal app suddenly will not display the correct Event times that I have designated in the little pop up box? Any ideas about what I can do to reset iCal or fix this annoying error in the app?
Thanks!
Marilyn

Hi,
Have you tried turning it off in iCal's Preferences and then back on again?
Best wishes
John M

Event time issue - IPS 4240, v5.0, VMS.

Hi,
I am having this unique issue. Whereas the IPS system time is correct, and I have set a UTC offset of 330 min (being in the GMT +5.30 hrs time zone.), I am still seeing the event time on the IEV as UTC, and not the system time. This is kinda tedious trying to keep track of the actual local time the event occcurred. The system clock on the IPS shows correct local time.
Also, on the VMS server, the system time is the same as the IPS. However, whenever I open up the SecMon, to view the event, it gives me a funny default start & end time, which is about 3 beyond the system time (I expect the time range reflected in the SecMon, should correspont the system time of the VMS machine, when the SecMon->Monitor->Events link was clicked.) For e.g. if I click on the SecMon->Monitor->Events link at say 10.00 am, on 13th April, I expect the fetch events time range to show from 13-April-2005 10:00:00 hrs to 13-Aril-2005 10:00:00 hrs. However, what it actually displays is 13:00:00 hrs to 13:00:00 hrs. I am at a loss where this time difference is creeping up from. Also, if instead of the time range, I specify, say last 1 or 2 hrs, it wont show me any events. (This I suspect is because of the funny 3 hr time difference that has crept in.) I can only see the events, if I ask the events of beyond last 3 hrs.
Any suggestions how to resolve the same? I am not using any NTP servers currently. Would that help?
Thanks in advance.
Ajay.

Hi Ajay
Its not a major problem either in your CISCO IDS and CISCO VMS. It is time synchronizing factor involved in this mismatch time view on your Sec Mon.
What version of VMS you deployed?
If it is not updated version then download the PERL script Workaround files from Download Center then run on it.
After that, the problem will be resolve.
If it will not resolve then pls reply.
Thanks

EEM problem with "event timer absolute time"

Hi
I wanted to execute a EEM script at a certain time, 2015-05-04 03:00:00 GMT+2:00. So I used the "event timer absolute time" command.
But the switch executed the script immediately. Is there something wrong with the script? Is there another way to execute a few commands at a certain time like this?
Script:
event manager applet CHANGE_TO_RAPID-PVST_v2
event timer absolute time 1430701200
action 1.0 cli command "enable"
action 1.1 cli command "config t"
action 2.0 cli command "spanning-tree mode rapid-pvst"
action 2.1 cli command "end"
action 3.0 syslog msg "Changed to Rapid-PVST by EEM script CHANGE_TO_RAPID-PVST_v2"
Switch: WS-C3560X-24T-S
IOS: 15.0(2)SE4
EEM version 3.2
#show event manager history events
No. Job Id Proc Status Time of Event Event Type Name
2 2 Actv success Thu Apr30 09:25:02 2015 timer absolute applet: CHANGE_TO_RAPID-PVST_v2
I used this link to calcute the timer value. http://www.epochconverter.com/

I honestly have never seen anyone use this timer. You'd be better off using cron and removing the applet when it's done.
That said, this does look like a bug. Given the little use we've seen of this timer, it's likely a new one. I recommend opening a TAC case so it can be tracked.

Event times incorrect

Similar Messages

Maybe you are looking for