Event triggered by ECO Status change. Where is the setting in the system?

Hi experts, I am looking into some custom developed workflows and one of them is has a triggering event "Status10" which is triggered when a ECO has been changed to status 10. Object type of the event is ECM. How can I find out where this setting of this event is. I just cannot find where in the system that this event "Status10" is being triggered when the ECO status is changed. I can see in transaction SWUE that it has the Workflow as the receiver type and the object key is the ECO number.
Can anybody share some light?
Thank you

You can check this configuration in TCode: SWE2. Here the setting between Wflow and event is stored. If you want to check how the event is getting triggered you can check transaction code BSVZ.
<b>Reward points if useful</b>
Thanks
Arghadip

Similar Messages

  • I no longer want to merge my work laptop with my icloud account on other devices.  How can I change the setting for the laptop?

    I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate.  How can I change the setting for the PC at work?

    Sign out of iCloud.

  • It is a suggestion on Adobe Dreamweaver:  Could you change the setting of the page or template; to a free platform?  example; move: images, tables and other elements all over the place covering the page. in order to facilitate the user in the design envir

    It is a suggestion on Adobe Dreamweaver:
    Could you change the setting of the page or template; to a free platform?
    example; move: images, tables and other elements all over the place covering the page. in order to facilitate the user in the design environment.
    free
    Thank you for your attention

    Adobe has been trying this and the product is called Muse ( Web design software | Download free Adobe Muse CC trial ).  It doesn't give you the control over the code that most developers prefer but it could help bridge the gap for design if that is what you are looking for.

  • Why can't i change the setting at the security

    Why can't i change the setting at the security & privacy? After I switch to OS X Yosemite, i cant install some application. It says that I can install due unidentified developers. Can anyone help?

    You can change the setting, you may need to click the lock at the bottom of the preference pane. Be careful what you download and install, Gatekeeper is there to help you. OS X: About Gatekeeper - Apple Support

  • I decided to change my apple id on my iphone 5 to have a seperate account from the other people in my family. I changed all of the setting to the new id and I can't sync apps or music to my phone and i dont know what else to do. Please help!!!

    I decided to change my apple id on my iphone 5 to have a seperate account from the other people in my family. I changed all of the settings to the new id and I can't sync new apps or music to my phone and apps on my phone will not sync to my computer.  Please help!!!

    If you didn't already do so, authorize your computer for the new ID by opening iTunes and going to Store>Authorize This Computer.  Then sync your phone with iTunes.

  • Wher does one see the setting for the ABAp debugger

    Do you know where one can see if the debugger is set to update debugging?

    Hi,
    If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the <b>ABAP Debugger, you check Update Debugging  under Settings</b> and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
    http://www.sapdevelopment.co.uk/tips/debug/debug_backjob.htm
    Regards
    Sudheer

  • 2 custom events getting triggered on user status change

    Hi all,
    In IQS21 transaction, once a user changes the user status I need to send a work item to the superior.So for this I have delegated
    the business object BUS7051 to ZBUS7051. I have created 2 custom events HOD and APP.
    I have even configured all the settings in BSVZ.
    There are 3 user statuses 1.Created 2.HOD 3 .APP
    Once user changes the status from Created to HOD a work item(notification in change mode) should go to the superior and similarly from HOD to APP also.
    The problem is when I change status from Created to HOD,APP event is also getting triggered along with HOD.
    Please tell me where I am wrong.
    Refards,
    Nishant

    Nishant,
    The APP event is used for Display the notification right? The two events are triggered for the same process. So the two events are linked with same process. Have you done anything in SWEC?
    Thanks.

  • Events Triggered During Radio Buttons Changes

    Hi ,
    I added 3 radio Buttons in my Parameter Screen.
    Whenever iam changin the Buttons, Both At Selection Screen Ouptput and At Selection Screen Event is executed.
    Is it correct ?
    Thanks
    Kuna.

    Hi Venkat,
    ths is the first result in  Google if you search for your subject with a preceding ABAP.
    [Next time please try yourself, thank you!|http://help.sap.com/saphelp_nw04/helpdata/en/e6/83a0375b5dd003e10000009b38f8cf/content.htm]
    Regards,
    Clemens

  • Can you change where a clip connects to the story line?

    Anyone?

    The question's kind of vague. A clip gets connected to  the primary storyline based on where the skimmer or playhead is. If you want them connected at a different place move the skimmer before you make the edit.
    If you mean can you change the connection point of a connected clip without changing its position, yes, you can. You option-command click on the lower edge of the connected clip at the point at which you want it attached to the primary storyline.

  • Just changed my router to Airport. Mac  Lap top and IPad works OK except my VAIO desk computer. It says that airport does not support the setting of the computer. Check the security setting. Whar

    Just changed my router to airport extreme
    My MacBook pro and iPad work fine but my VAIO wireless  desk computer is not working.
    It says
    , the router does not support the network .check security setting.
    Which of the security setting will I change?
    Thanks for your help.

    John, thanks for the email so quickly.
    I too hope I haven't tried "everything" either but I am reasonably technical.  I had done what you suggested to do before but I did both again.
    Ethernet is yellow in the left side bar.  In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
    I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both.  I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail.  I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
    Thoughts???

  • Mighty Mouse wireless: changing the setting of the low battery indicator

    Hi,
    It seems that the low battery indicator for the wireless mighty mouse appears when the battery level goes under 30%. Is it possible to change this setting, e.g. make it occur when it passes the 5% of remaining battery?
    Thanks!

    I fully agree with Tibo. I'd like to change this setting as well.
    This low battery warning may be a good heads-up for someone who feeds their MM cheap batteries but, I got two Energizer AA Lithium batteries in mine and it literally "keeps going and going..." consistently for weeks while constantly receiving the annoying low battery warning.
    Come on, users a perfectly capable of deciding what is fair-warning on the life of batteries we feed the MM.

  • HT4972 ipod keeps typing on its own and changing the setting and the touch screen isn't working

    my ipod touch is acting dumb!!! it keeps typing its own messages n  changing my setting all night> i  tried to restore it and after it is acting the same..HELPPPPPPPPPPPPP!!!!!!!!!

    If the screen is clean and you restored to factory defaults/new iPod and are still having the problem that indicates hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • ERecruiting - Triggering of mail when candidate status changes

    Hi All,
    Is an email generated from the system, when a candidate status is changed?
    Say for example if the Activity of an candidate is changed to "Status Change - Rejected", will an email will be generated?

    Hello,
    some general thoughts at the beginning:
    Candidates do not have a rejected state. Candidate states are profile locked and profile released. Only applications and candidacies have a rejected state. It is very important for a technical view to have the obect types in e-recruiting very clear or you will get into big trouble sooner or later.
    SAP delivered workflows are examples. They do not fit a production environment. Also the sap delivered activity and process customizing is an example (and no good one) you will have to design this according to the business needs in the project.
    For the workflow question. It is possible to trigger a workflow by activity creation and activity completion. For status chage activities ths is the same as they are completed directly and never have status planned. The BOR object ERC_ACTIV contains both events, activtycreated is triggered directly, activitycompleted needs a note to run properly.
    It is also possible to trigger a workflow by a status change of an object. The super BOR object ERC_OBJECT contains a statuschanged event, which is raised for all status changes of NA, NB, NC, ND and NE objects.
    For rejection there are basically 2 scenarions.
    Scenario 1
    When rejecting a candidacy by creating a rejection activity you trigger a workflow based on the activity to create the corresponces activity automatically. You can either send it directly or just create it to allow the user to have an individual text. (I do not go into details of this workflow according to the chosen application-candidacy-relation, that would go to far at this point).
    Scenario 2
    When rejecting a candidacy directly in minimum data entry you do not have a status change activity as the status is set directly. In this case you have a workflow which is triggered directly by the status chang which again creates (and sends) the correspondence activity.
    Of course you need checks to ensure the two workflows are not mixed.
    Kind regards
    Roman

  • Exit for CJ20N where system status changes can be captured

    Hi Experts,
    I need exit for CJ20N where system status changes can be captured
    for both the below cases
    1) When WBS Element is having Networks inside it
    2) when WBS Element is having no networks inside it
    EXIT_SAPLCOBT_001  --->>>   ZXCO1U01  , will work for 1) , but not for 2)
    i want an exit where status change gets captured for both cases 1 and 2 and
    will do further processing according to client needs based on status change
    Need to trigger IDOC on status change of  WBS element.
    If WBS is having network inside it  , then network status changes also with WBS status change
    and IDOC should trigger for WBS also.
    I just want suitable exit  / place for coding . Rest i can do.
    if no suitable exit / BADI , then what is the best possible place where i can go for Implicit Enhancement
    Best Regards,
    Gaurav
    Edited by: TheGaurav on Oct 25, 2011 7:08 AM
    Edited by: TheGaurav on Oct 25, 2011 7:12 AM

    I am kind of stuck in a similar issue. I need to perform custom validations on standard fields which cannot be done through OPSI or OPUC transactions. 0007 or 0002 User exits seem to assist on custom field creations/validations. However, I do see people posting the following BADIs which may be useful.
    CO_SRULE_CHECK
    PROJECTDEF_UPDATE
    WORKBREAKDOWN_UPDATE (which you already tried)
    WBS_FIELDS_FOR_ASSET
    CO_SRULE_CDOC
    Let me know if any of these worked out...
    AN

  • SD OVERALL STATUS CHANGE

    Hi Gents,
    The requirement is that, there is trial Sales Order is there, which will not be invoice nothing will happen, it will just for trial...
    So what i need is that once that trial is expire (7 days assumption), is there any way that this sales order should not show in Open Sales Order.
    Rejection line item will not work for this as client not required.
    So what i am trying that, is there any way to change the OVERALL STATUS to COMPLETE manually. So that i can go for back ground scheduling.
    hope you will gents will respond asap.
    Thanks in Advance !!!!
    Regards,
    Kundan

    to create events from a status change use transaction BSVW see Maintaining the Assignment Between Status Change and Event - Roles in Workflow - SAP Library.
    use the event to start a workflow, after approval/rejection use a background method to change the user status.

Maybe you are looking for