Event triggering fails to start the next process chain

Hi
I have two process chains A & B
At the end of process chain A i am triggerring the an event which is the start condition for process chain B.( periodic )
Now when i debug my process chain A , i see the event is triggered successfully but inspite of that the next process chain does not start.
Does anyone faced similar problem? Its little urgent. Any clue would be useful.
Regards
Purva

HI,
In addition to the above comment also see if you have given the event name correctly and try to see if you can run the PC by triggering the event manually (Tcode: SM64)
Assign points if helpful.
Rgds,
Kalyan

Similar Messages

  • In a process chain,the next process is not triggering automatically?

    Hi All
    We have have a metachain,in that we have many local chains,in one of the local chain once the above process is successfully completed then the next process is not triggering automatically,which should suppose to happen?
    Can anyone help me out why this process is not triggering automatically and how/where to check?
    As this problem is repeating daily and loads are delayed due to this
    Regards
    Balji

    Hi,
      you can manually start that job, by changing the job insm37, it will show you the job priority ( A OR C.) you can change it to A, and youc an change your start condition also there.
    or you can use this RSPC_PROCESS_FINISH to trigfer process.
       But, process chain processes should be triggered automatically, i think this issue is due to load of jobs ( in your server there should  be lot of jobs having higher priority than this job), this will solved automatically when load is less.
    hope this will be helpfull.
    v.sen.
    Message was edited by:
            Senthilkumar Viswanathan

  • Error-- failed to start a managed process after the maximum retry limit

    hi
    I installed oracle 10g application server. its installed fine. But now i am facing a problem in which i am getting the following error message when i try to start opmnctl from command prompt:
    opmnctl: starting opmn and all managed processes ..
    ======================================================
    opmn id=apps:6200
    0 of 1 processes started.
    ias-instance id=orcl.apps
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    default_group/home/default_group/
    Error
    -->Process (index=1, uid=1845537884, pid=1320)
    failed to start a managed process after the maximum retry limit
    Log:
    D:\product\10.1.3.1\oracleAS_1\opmn\logs\\default_group~home~default_group~1.log
    Please help me in order to remove this, so that i can run oracle apps.
    Regards,
    Aqrs

    Hi
    i checked the log already but there is not such problem defined in it.
    Following is the log generated ion this error:
    Configuration information
    Running in D:\product\10.1.3.1\OracleAS_1
    Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
    Oracle home:D:\product\10.1.3.1\OracleAS_1
    Oracle home name:Unnamed
    Instance name:orcl.apps
    Instance type:allProducts
    Version:10.1.3.1.0
    Uses infrastructure:false
    Not an infrastructure instance, no infrastructure information available
    Components:[j2ee, orabpel, oraesb, owsm, Wsil]
    2009-06-03 01:46:58.609--Begin log output for Mid-tier services (orcl.apps)
    2009-06-03 01:46:58.625--Processing Step: starting OPMN
    2009-06-03 01:47:07.921--Processing Step: starting OPMN managed processes
    2009-06-03 01:48:47.312--End log output for Mid-tier services (orcl.apps)
    An unknown OPMN error has occured
    oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         ... 6 more
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    Exception caused by
    There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
    oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    <?xml version='1.0' encoding='WINDOWS-1252'?>
    <response>
    <msg code="-82" text="Remote request with weak authentication.">
    </msg>
    <opmn id="apps:6200" http-status="204" http-response="0 of 1 processes started.">
    <ias-instance id="orcl.apps">
    <ias-component id="default_group">
    <process-type id="home">
    <process-set id="default_group">
    <process id="1848837552" pid="3128" status="Stop" index="1" log="D:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
    <msg code="-21" text="failed to start a managed process after the maximum retry limit">
    </msg>
    </process>
    </process-set>
    </process-type>
    </ias-component>
    </ias-instance>
    </opmn>
    </response>
    Could u plz guide now ?

  • Failed to start a managed process after the maximum retry limit

    Hi,
    Getting the following error
    /app/oracle/product/101202/opmn/bin (OID)>opmnctl startproc ias-component=OID
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=smtest02:6202
    0 of 1 processes started.
    ias-instance id=infra.smtest02
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    OID/OID/OID
    Error
    --> Process (pid=26032)
    failed to start a managed process after the maximum retry limit
    Log:
    /app/oracle/product/101202/opmn/logs/OID~1
    Any suggestions
    Thanks
    Kedar

    Hi Alvarez
    I have managed to start OID
    stop the process using opmnctl stopall
    stop the database
    stop the listener
    stop emctl processes
    usind oidctl to stop OID instance
    start the listener
    start the database
    start the process opmnctl startall
    start emctl start iasconsole
    used oidctl to star instance for OID
    /app/oracle/product/101202/bin (OID)>cd ../opmn/bin
    /app/oracle/product/101202/opmn/bin (OID)>opmnctl status
    Processes in Instance: infra.smtest02
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | 7763 | Alive
    DSA | DSA | N/A | Down
    HTTP_Server | HTTP_Server | 6183 | Alive
    OID | OID | 6187 | Alive
    but when i am trying to start dbconsole ( command below) getting follwong error OC4J Configuration issue. /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID not found.
    emctl start status dbconsole
    /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID ---> /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_ORACLEID
    where can i change the setting for the parameter so that i can log on to dbconsole from the browser, which config file ?
    the reason i needed dbconsole was to use Oracle Directory Naming GUI to configure db to replace old Names Server hence i need Db console GUI
    Kedar

  • ORA-12500   Tns listner failed to start the dedicated server process.

    Hi all,
    I am getting below error message when i am trying to connect to database through db console.
    OS-Windows sever
    Database-10GR1
    ORA-12500 Tns listner failed to start the dedicated server process.
    Kindly help me out..
    Thanks in advance
    Edited by: rajaryan on Sep 17, 2009 4:46 AM

    Hi all,
    I am getting below error message when i am trying to connect to database through db console.
    OS-Windows sever
    Database-10GR1
    ORA-12500 Tns listner failed to start the dedicated server process.
    Kindly help me out..
    Thanks in advance
    Edited by: rajaryan on Sep 17, 2009 4:46 AMYou are running short of resources. Check v$resource_limit. You may also use the orastack utility for minimizing the memory utilized by oracle.
    http://hrivera99.blogspot.com/2008/01/orastack.html
    Regards,
    S.K.

  • DRM Process Manager failed to start with error Timeout starting the following process: NetJNIBridge.

    When we Start the DRM  DRM Process Manager failed to start with following error
    [Process ID: 3948, Thread ID: 1, Process Manager]
    Error loading the NetJNIBridge host process on machine: EU9SC1WNW001
    System.Exception: Error loading the NetJNIBridge host process on machine: EU9SC1WNW001 ---> Oracle.Drm.Exceptions.ResourcedException`1[Oracle.Drm.Messages.MsgsProcessManager]: DRM-61028: The following unexpected error occurred communicating with URL 'EU9SC1WNW001': DRM-61023: Timeout starting the following process: NetJNIBridge. DRM Process ID: b3e602fa-f6c1-abcc-4af7-c0a99b51b235
       at Oracle.Drm.ProcessManager.Program.ServiceMethod(String machineName, UInt16 port, Action`1 action)
       at Oracle.Drm.ProcessManager.Program.StartNonEngineProcesses()
    After 11.1.2.3 DRM upgrade

    OS:linux
    i am getting error in installing OPMN manually
    when trying to installing OPMN manually getting error i.e,
    opmnctl: starting opmn and all managed processes...
    opmnctl: opmn start failed
    when checked opmn/logs:
    opmn.log is empty
    ons.log showing error ie:
    13/06/17 19:22:45 [4] ONS server initiated
    13/06/17 19:22:45 [2] 10.209.178.16:6200 - thread create failed
    ipm.log shoeing error i.e:
    13/06/18 11:58:04 [4] OPMN server ready.  Request handling enabled.
    13/06/18 11:58:16 [4] PM state directory exists: /u02/app/orapp/product/10.1.2/opmn/logs/states
    13/06/18 11:58:16 [4] PM state file does not exist: /u02/app/orapp/product/10.1. 2/opmn/logs/states/.opmndat
    any idea why it is showing error??

  • Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'

    Hi all,
    Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
    'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
    I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
    I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
    it would seem
    some people have had relates to editing the VMX configuration file and adding the line
    hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
    Any help would be greatly appreciated.
    Many thanks in advance.
    James

    The hypervisor event log message is generated only at boot - so this would be expected.  Also vmbus should not be running on the host (I was looking at a VM yesterday)...  This error message is generated only when the vid is determined not to be
    running or cannot communicate with the hypervisor.
    I have seen this due to anti-virus software in the past or due to driver verifier being configured.  Since it looks like you checked driver verifier already do you have anti-virus software installed?  If so have you followed the best practices
    and exempted the Hyper-v services? 
    http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
    To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
    Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
    Custom virtual machine configuration directories
    Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
    Custom virtual hard disk drive directories
    Custom replication data directories, if you are using Hyper-V Replica
    Snapshot directories
    Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
    -Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb

  • REP-6102: Failed to start the XML parser.

    I have this project that was started using the Reports Wizard, however using a very simplified query. Then I've applied quite a lot of PL/SQL code to pre-process the report data. Eventually everything works fine, and the only thing remaining is to properly format the output. Then I save the project as a JSP, or RDF, or XML, and quits Reports all together.
    The next time I open the project everything seems fine Thus I employ the Wizard to format the reports' output, and saves the project again. And quits the application.
    The next time I open the project I receive one of two messages; 'REP-6102: Failed to start the XML parser', or 'REP-0002: Unable to retrieve a string from the Report Builder message file'. Then Reports crashes!!!!
    This means I cannot complete the report as I'm unable to save and retrieve a completed report. I've tried this with several reports, all with the same result. I've even unstalled all Oracle-sw on my PC and re-installed it several times.
    I'm running WinXP, Oracle 9I DS with patch 9.0.2.1 applied.

    Hello Lasse,
    I think you are hitting a known issue, could you please call Support to get the status of this problem.
    Regards
    Tugdual

  • Failed to start ns-slapd process on Windows

    I install Sun Directory Server 6.0 on Windows:
    1. Installation
    dsee_deploy install -c DS -i D:\DirectoryServer
    2. Create Instance
    D:\DirectoryServer\ds6\bin\dsadm create D:\DirectoryServer\ds
    3. Start instance
    D:\DirectoryServer\ds6\bin\dsadm start D:\DirectoryServer\ds
    And get folloving error:
    Server not running ! Failed to start ns-slapd process
    Server's log is empty.
    What I can do to solve this problem ?
    I see topic with this problem on UNiX platform, and
    how about Windows 2003? I make installation as Administrator.
    Michael Vasilyev

    Thank you, Ludovic !
    I have new error when create Instance with command (changes default port number):
    dsadm create -p 1525 D:\DirectoryServer\ds
    Then I start DirectoryServer:
    dsadm start D:\DirectoryServer\ds
    And get in command line:
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Waiting for server to start...
    Server not running!! Failed to start ns-slapd process
    In Dialog Window appear message:
    Directory Server ds is terminating. Failed to set the EventLog source.
    ---------------------------------------------------------------------------------------------

  • I fail to start the sap server with error:Operating system call recv failed

    I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
    R/3 Basis System: Operating system call           recv failed (error no. 10053)
    Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

    trc file: "dev_disp", trc level: 1, release: "620"
    Sun May 07 13:14:30 2000
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        3628
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    Sun May 07 13:14:32 2000
    WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
    Sun May 07 13:14:37 2000
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          12784     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
    DpShMCreate: allocated sys_adm at 001E0040
    DpShMCreate: allocated wp_adm at 001E0560
    DpShMCreate: allocated tm_adm_list at 001E3750
    DpShMCreate: allocated tm_adm at 001E3778
    DpShMCreate: allocated wp_ca_adm at 00380438
    DpShMCreate: allocated appc_ca_adm at 00384A88
    DpShMCreate: allocated comm_adm_list at 003861F8
    DpShMCreate: allocated comm_adm at 00386210
    DpShMCreate: allocated ca_info at 003B5010
    DpShMCreate: allocated wall_adm at 003B5018
    MBUF state OFF
    Sun May 07 13:14:38 2000
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
    <ES> 2457 blocks reserved for free list.
    ES initialized.
    ***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6200, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
    DpMsgAdmin: Set patchno for this platform to 674
    Release check o.K.
    Sun May 07 13:15:18 2000
    ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    Sun May 07 13:15:38 2000
    ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W13
    my types changed after wp death/restart 0xbf --> 0xb7
    Sun May 07 13:15:58 2000
    ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W15
    Sun May 07 13:16:18 2000
    ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    my types changed after wp death/restart 0xb7 --> 0xb5
    Sun May 07 13:16:38 2000
    ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W14
    ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W16
    my types changed after wp death/restart 0xb5 --> 0x80
    DP_FATAL_ERROR => DpEnvCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    DpModState: change server state from STARTING to SHUTDOWN
    Sun May 07 13:16:42 2000
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
    MBUF state OFF
    MBUF component DOWN
    ***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

  • Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

    I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
    "Windows8VM" failed to start.
    Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    "Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
    The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
    I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
    Nick :(

    Okay,  I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration.  Made sure that both Virtualization and VT for Direct I/0 are on.  Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
    the DVD point to Windows8 ISO file on hard drive.  When I clicked on start, it stayed in the Starting status mode for about 5 minutes.  Then of course it failed.  I looked at the Hyper-V-VMMS log and here is what it output:
    Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
    1) Error: The virtualization infrastructure driver (VID) is not running.
    2) Info:  Found a certificate for server authentication. Remote access to virtual machines is now possible.
    3) Info:  Successfully started the Virtual Machine migration connection manager.
    4) Info:  Virtual Machine Management service is started successfully.
    5) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    6) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    7) Info:  The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
    8) Info:  The WMI provider 'VmmsWmiEventProvider' has started.
    9) Info:  The Integration Services Setup Disk image was successfully updated.
    10) Error: The virtual machine bus is not running.
    11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
    13) Error:  The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
    14) Error:  'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
    Nick

  • Failed to start the SASL connection (every 10 minutes)

    I have been recently seeing the following console message at 10 minute intervals:
    8/23/12 8:46:44.368 AM Mail: [<_LibSasl2SASLClient: 0x7fd1cbe048f0> mechanism: PLAIN security layer: no] Failed to start the SASL connection
    SASL(-1): generic failure:
    I use Apple mail connected to a Verizon FIOS internet account using SSL for both incoming (port 995) and outgoing (port 465) per Verizon requirements. Mail does work fine in both directions, just the annoying log messages every 10 minutes.
    Any ideas?,  thanks in advance
    Larry

    I just began searching the same message. Mail has been taking a little while to quit. The message you referred to seemed to be triggered about the time Mail was quiting. Along with this one:
    9/2/12 9:03:15.900 PM Mail: [<_LibSasl2SASLClient: 0x7f8c02597300> mechanism: CRAM-MD5 security layer: no] Failed a step of SASL authentication
    SASL(-1): generic failure:

  • Error creating ASComponent oid1,Cause:Failed to start the componentAction

    Hi,
    On 64-bit Windows-7 machine, I have installed Oracle DB (11.1.1.5.0), RCU (11.1.1.5.0),
    Weblogic Server (10.3.5.0) and then I was trying to install Oracle IDM (11.1.1.5.0).
    During IDM installation, I selected the option "Install and Configure".
    Installation set up is successful.
    But it failed while configuring Oracle Identity Management Components - step2 - Start Oracle Internet Directory - Failed.
    Error :
    Error creating ASComponent oid1.
    Cause:
    An internal operation has failed: Failed to start the componentAction
    Logs:
    [OOB IDM CONFIG EVENT] onConfigurationError -> set RETRY ExecutionResponse..
    E:\Oracle\Middleware\Oracle_IDM2 E:\Oracle\Middleware\asinst_1 asinst_1
    oracle.as.config.ProvisionException: Failed to start the component
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:364)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:951)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    oracle.as.provisioning.util.ConfigException:
    创建 ASComponent oid1 时出错。
    Cause: 内部操作失败: Failed to start the componentAction: 有关详细信息, 请查看日志。
         at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:414)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:364)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
         at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:523)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:439)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:951)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: oracle.as.config.ProvisionException: Failed to start the component
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:157)
         at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
         at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
         ... 15 more
    progress in calculate progress50

    Hi,
    Please try
    "Error Creating ASComponent Oid1" Error During OID Configuration When Installing OID11g (Doc ID 1427253.1) that should resolve the issue.

  • ISQL*Plus Failed ta start the service, Error:0

    Hello there,
    I setup Oracle 10g for window 2003. When to Configuration Assistans then show table error : Failed ta start the service, Error:0, The operation completed successfully.
    In the Event Viewer i can see the following:
    The description for Event ID ( 15 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1460, This operation returned because the timeout period expired.
    , 4.
    I set the Path variable C:\oracle\SOL\102\bin and the ORACLE_HOME to:
    C:\oracle\SOL\102
    But it did not solve the problem.
    I installed only Windows 2003 Enterprise Server with Service Pack 2
    when i use this command isqlplusctl start at command prompt the message appears:
    Failed ta start the service, Error:0, The operation completed successfully.
    please can you help here?

    I forgot.
    I installed JAVA SDK 1.4.2_09 too
    But when i uninstall it the same error appears...
    But i think Oracle do run with 1.4.2_09 or not?

  • Failed at starting a review process

    I defined reviewer and owner of a Planning Unit Hierarchy. And give all permission except administrator in Share Service. Then start the review process. The Approvals Status changed to 1st Pass. But the Sub-Status is 'Failed: Unauthorized New Owner'. What's wrong with it?

    Can I know how you resolved this?

Maybe you are looking for