Event Type Descriptions - Mod Wheel / Quick Access Auto Help

I really just need some description for the possible event types you can assign to controllers in logic, like the mod wheel. For example, expression, portamento time... I don't know what i should be listening for when it comes to utilizing these controls. But I know some of these options would greatly enhance my samples (EWQLSO) in terms of reality (strings swelling instead of remaining stagnant). The manual mentions around 15 event types, and I was wondering if I could get some solid definitions. Some are obvious, but feel free to fill in the gaps, it would be much appreciated.
Also, I've had some trouble getting mod-wheel movement to show up in multiple windows in logic. Even if I do automation quick access assigned to the mod wheel, I get split information. For instance, the Arrange Window will record pitch bend data, but it will not be reflected in the Event List, or Editor, let alone these options in the Matrix window.
Any help would be great.

Please don't cross-post. It is considered very rude to do that here:
http://forum.java.sun.com/thread.jspa?threadID=5233033&messageID=9953169#9953169

Similar Messages

  • When I enter events in my calendar to quickly, when it auto-syncs it will revert back to my old event.

    When I enter events in my calendar to quickly, when it auto-syncs it will revert back to my old event.
    If I have two calendars in use, if I use one (say red "home") and decide I want to change it to another (say green "work") it will revert back
    I've called Apple, been in the store to meet numerous "geniusus" and no one can figure it out. Most apple assistants tell me over the phone that "that is not possible", well it is possible and the so-called "geniuses" have seen and confirmed it is possible but to this point the only thing "impossible" is solving the problem.
    NOTHING MORE FRUSTRATING THAN PUTTING AN APPOINTMENT IN MY CALANDAR ONLY TO MISS IS BECAUSE OF AN APPLE ERROR

    Naughty,
    You are posting a Pages question in the Numbers forum.  I am going to ask thie be moved to the Pages forum.  In addition please post a screenshot.  Based on playing with a chart in Pages, I do not think the charts take their input from a table, but rather, you enter the data by clicking the chart (to activate it), then clicking the button "Edit Chart Data":
    manually editing the entries in the table:
    I would think you want to have a table in Numbers to create the data, then copy and paste the data into the data table for the chart (I wouldn't type it in)

  • Description of bus.event type is displayed with incorrect sequence in query

    Dear experts,
    I have created a query in logical database PCH in order to display the description of business event types. The problem is that if the description's length is more than 1 line, the query displayes the lines not in order (e.g. line with tabseqnr 1 first, line with tabseqnr 2 second etc) . It displayes first the line with tabseqnr 2.
    Thank you in advance,
    Vana Sounta

    The first thing you should do with any used computer is to erase the hard drive and install the operating system from original media. If you didn't receive installation discs with the Mac, you'll need to order them from Apple customer service; or, if you want to install a newer OS version than the one the machine shipped with, find a retail disc. The newest version you can run is 10.5, though you might have to add memory. The disc will be hard to find and expensive. Beware of scams, especially on eBay, and above all don't buy the gray discs that came with another Mac. Trying to get a 10.3 system to work with modern websites is probably a waste of time.

  • Auto-Hide Ribbon - Quick Access Toolbar disappears

    In Outlook 2013 I select to auto-hide the ribbon but this also hides the Quick Access Toolbar. Why does it do that. When the ribbon is hidden there is still space for the quick access tool bar so why hide it? It would be really useful to be able to see the
    quick access tool bar (in the available space) when the ribbon is auto-hidden.  Now, if I want to use the quick access toolbar with the ribbon hidden I have to un-hide the ribbon first.
    Can we see the quick access tool bar when the ribbon is hidden? 

    Hi,
    By default, Auto-hide Ribbon causes the tabs, ribbons and quick access toolbar to completely disappear, giving you the maximum amount of space to edit documents.
    If you want to show the Quick Access Toolbar, we can just select Show Tabs which
    shows only tabs, along with the quick access toolbar, but without their associated ribbon commands.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Direct Access: No Security Associations under Main mode and Quick Mode: No SA

    Could someone please help me with the issue here :'(
    Windows Firewall advanced security--> Monitoring --> Main mode (Empty)
      --> quick Mode (Empty)
    Its been days I am trying to trouble shoot this issue. All the setup seems good. I am not able to figure out this certificate issue.

    Hi Sijin,
    What is the status of this issue ? If you still have issue please confirm the following.
    1) What is the Network Topology?
    2) What is the client OS?
    3) If you have it configured for Windows 7 and 8 both then do you have Client Authentication Certificate in Personal store and Root Certificate from Internal CA present on client machine?
    4) What is the Status of IPHTTPS Interface?
    5) Are you able to Ping Direct Access (DNS Server) IP Address (2002:836b:33:3333::1 from client?
    6) What is the status of below services on the client machine?
    IKE and AuthIP IPsec Keying Modules
    IPSec Policy Agent
    7) Which Windows Firewall profile is enable on DA Server and Client?
    Regards
    Kapil

  • Mod wheel won't stop moving selected fader?

    Anyone else seen this problem?  Moving my mod wheel moves whichever fader is currently selected in the mixer.  I can't make it stop.  Automation Quick Access is turned OFF.  Any ideas?
    Thanks,
    Michael

    How is it that no one has responded to this question?  Is anyone out there?  I have had exactly the same problem.  The music on my iPad is a complete mess -- some albums are missing, others are missing half of their music and have those little red bulls eyes (the ones that show downloading progress) next to them.  It's utterly useless.
    When I plug it into my Mac Book Pro, sometimes it just hangs on "preparing to sync" but other times it goes through "downloading purchases from ipad" and then thinks it's all done.  I also tried to turn off sync music, and to put it on "sync all music" but iTunes continuously puts it back on "sync selected."  It has been doing this for months on end now.
    I have looked all over these forums and on the web, and all I see is frustation.  My only recourse I guess is to move on from Apple, or use some other program that Apple hates, like MediaMonkey. Apple really has become a bottom of the barrel provider -- your updates only introduce new problems that no one can seem to help with.
    And please don't suggest I jump through hoops with iCloud -- I have. I have deleted the account, I've turned everything off, and I've turned off and on the "find my ipad" feature, I've turned off an on the "sync over wifi" -- all suggestions from others, and the same thing happens in iTunes no matter what settings are on or off, or what combination of settings are on or off.  It simply will not sync the music library, making my ipad just a piece of wasted space and money.
    I really don't know what else to do.  I know no one will respond to me any more than they did to the original poster, but I had to vent my complete frustration -- it was either type, or take a sledge hammer to all my apple products.
    Samsung, here I come.

  • How do you crossfade with mod wheel?

    I'd like to be able to xfade between 2 samples during a single note in exs.
    eg both trumpet soft and trumpet loud triggered. then use the mod wheel to change their relative levels so that at either extreme only 1 or other of the sample is heard.
    can't seem to figure out how to do that, but i'm sure its possible.

    Hi Rohan,
    There are a couple of ways to do this in with the EXS, but the following seems to work the best for me.
    Using the trumpet soft and loud sample example...
    You would assign all of the soft trumpet samples (zones) to a layer in the EXS editor. Click on the triangle in the upper left hand corner of the layer box to expose it's parameters. And where it says "Select Range", assign values that would correspond to the lower throw of the mod wheel, in terms of MIDI values. In the case, something like 0 - 63.
    Then put the loud samples on a second layer, and assign it's "Select Range" to the other half of the mod wheel throw. (64-127)
    Then, go to the front panel of the EXS. And in the first section of the Mod Matrix, where it says "Dest" (destination), select "Sample Select". And where it says "Src" (Source), select "Ctrl #1" (Controller #1, which is the Mod Wheel).
    If you played the trumpet sample now, and moved the mod wheel, you would hear an abrupt "switch" from soft to loud samples.
    So now, look at the box in the upper left hand corner on the front of the EXS, and you'll see "X-Fade". The "amount" parameter will adjust how quickly the 2 samples crossfade, and the "type" parameter allows you to select the type of crossfade you employ. Experiment with different values here, to see what works best for your situation.
    It's actually a very easy thing to set up, but I'm afraid my explanation might come across as anything but!
    A few things to note...
    Crossfading between samples of differing dynamics (i.e. soft>loud) tends to work better, or at least achieve convincing results when it's an ensemble, as opposed to a solo instrument. At least with some of the samples I have tried it with. Also, having 3 or 4 dynamic levels yields far better results than just 2. However, doing this with the trumpet example is entirely possible, but the quality and consistency of the samples plays heavily in the outcome. For instance, the solo trumpet from VSL's Opus 1 uses the mod wheel to shift from soft to loud, using 3, maybe 4 separate layers, and the transitions are very smooth.
    Hope that helps...

  • Airplane Mode/ Mobile Network Access

    BlackBerry Z10 10.0.9.2372
    Please create quicker access to the mobile network radio toggle. When putting my phone I'm a locker or entering somewhere with poor coverage, my battery kills itself trying to find a signal. It would be much easier if a user could swipe down (to pull the rotation lock, alarm, settings, etc) and have one of the option be airplane mode or at least mobile network, like the older OS had. Thank you!

    Hey VinniDeLaTorre,
    Thanks for the feedback.
    There is a setting for Airplane Mode, it is located under Settings>Network Connections.  If you use this feature it will save on the battery life so your BlackBerry Z10 doesn't looking for any network connections.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Word 2013 - Publish as PDF or XPS button causes excessive registry queries / high CPU when added to quick access toolbar

    After installing Office 2013 Pro Plus on our XenApp 6.5 environment we noticed a drop in performance. Using taskmanager we could see winword.exe hit 20+% CPU usage when filling just 1 line with the same letter.
    Some investigating lead us to the "Publish as PDF or XPS button", when it is added to the quick access toolbar the cpu usage doubles during keystrokes. Using procmon I noticed excessive registry reading, up to 150,000 lines in 10 seconds.
    It seems to be a constant loop of the same queries to approx. 100 components in HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\
    I reproduced this in 3 different setups:
    Win2008R2 + Office2013 Pro Plus 32-bit + Office 2013 updates until 12-nov 2014
    Win 8.1 Laptop + Office2013 Pro Plus 32-bit + Office 2013 updates until 05-jan 2015
    Win 8.1 Desktop + Office2013 Pro Plus 64-bit + Office 2013 updates until 17-dec 2014
    Can anyone verify this behaviour? For now we've removed the shortcut from the quick access toolbar in our environment.
    Here's a small portion of the queries.
    19:22:49,7117781 WINWORD.EXE 1484 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    19:22:49,7117861 WINWORD.EXE 1484 RegOpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\1A89310DF62F54544A1465F790A7757D SUCCESS Desired Access: Read
    19:22:49,7117969 WINWORD.EXE 1484 RegQueryValue HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\1A89310DF62F54544A1465F790A7757D\00005109110000000100000000F01FEC SUCCESS Type: REG_SZ, Length: 130, Data: C:\?Program Files\Common
    Files\Microsoft Shared\OFFICE15\MSO.DLL
    19:22:49,7118058 WINWORD.EXE 1484 RegCloseKey HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\1A89310DF62F54544A1465F790A7757D SUCCESS
    19:22:49,7118154 WINWORD.EXE 1484 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    19:22:49,7118232 WINWORD.EXE 1484 RegOpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\837CF31208764B643868B58117357D20 SUCCESS Desired Access: Read
    19:22:49,7118332 WINWORD.EXE 1484 RegQueryValue HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\837CF31208764B643868B58117357D20\00005109110000000100000000F01FEC SUCCESS Type: REG_SZ, Length: 112, Data: C:\Program Files\Microsoft
    Office\Office15\OUTLFLTR.DLL
    19:22:49,7118415 WINWORD.EXE 1484 RegCloseKey HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\837CF31208764B643868B58117357D20 SUCCESS
    19:22:49,7118511 WINWORD.EXE 1484 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    19:22:49,7118586 WINWORD.EXE 1484 RegOpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\FDFFB7C3B3B7DA048B21B3A72D1BF855 SUCCESS Desired Access: Read
    19:22:49,7118694 WINWORD.EXE 1484 RegQueryValue HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\FDFFB7C3B3B7DA048B21B3A72D1BF855\00005109110000000100000000F01FEC BUFFER OVERFLOW Length: 144
    19:22:49,7118769 WINWORD.EXE 1484 RegQueryValue HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\FDFFB7C3B3B7DA048B21B3A72D1BF855\00005109110000000100000000F01FEC SUCCESS Type: REG_SZ, Length: 134, Data: C:\Program Files\Common
    Files\Microsoft Shared\OFFICE15\FLTLDR.EXE
    19:22:49,7118849 WINWORD.EXE 1484 RegCloseKey HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\FDFFB7C3B3B7DA048B21B3A72D1BF855 SUCCESS
    19:22:49,7118949 WINWORD.EXE 1484 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    19:22:49,7119023 WINWORD.EXE 1484 RegOpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\BF574A30F66E6D54186C7F15B116E7A3 SUCCESS Desired Access: Read
    19:22:49,7119123 WINWORD.EXE 1484 RegQueryValue HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\BF574A30F66E6D54186C7F15B116E7A3\00005109110000000100000000F01FEC SUCCESS Type: REG_SZ, Length: 100, Data: 20:\CLSID\{000C0126-0000-0000-C000-000000000046}\
    19:22:49,7119203 WINWORD.EXE 1484 RegCloseKey HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\BF574A30F66E6D54186C7F15B116E7A3 SUCCESS
    19:22:49,7119295 WINWORD.EXE 1484 RegQueryKey HKLM SUCCESS Query: HandleTags, HandleTags: 0x0
    19:22:49,7119369 WINWORD.EXE 1484 RegOpenKey HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\017CCC9DE12773C4FAD559D2951B14C6 SUCCESS Desired Access: Read
    19:22:49,7119466 WINWORD.EXE 1484 RegQueryValue HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\017CCC9DE12773C4FAD559D2951B14C6\00005109110000000100000000F01FEC SUCCESS Type: REG_SZ, Length: 128, Data: 22:\Software\Microsoft\Office\15.0\User
    Settings\Mso_Core\Count
    19:22:49,7119544 WINWORD.EXE 1484 RegCloseKey HKLM\SOFTWARE\MICROSOFT\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\017CCC9DE12773C4FAD559D2951B14C6 SUCCESS

    I'll do that, I'm however still interested if somebody can confirm the excessive registry queries.
    As a brief test, I captured winword.exe (2013) registry-reads on my Win8.1 pc (64bit Windows), with ProcMon.
    this is over a capture period of less than one second
    2092 of 2352 contain "component" in the reg path
    this is when I have winword open and whilst "File, Export" is displayed (this is what offers the export-to-PDF option)
    vs.  168 registry operations in an interval of 10 seconds, by winword.exe, if word is simply "running in background with an open blank document"
    I'm not sure if that is useful, but it seems an awful lot of registry reads/writes from an application which isn't apparently doing anything at the time..
    EDIT: similar registry read/write rate, when save-as-pdf is added to QAT (again sitting idle on a blank document). the registry read/write rate drops back down to 160 if the save-as-pdf feature is then removed from QAT.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Embed word document in C# winforms, Have to disable/hide Quick access toolbar.

    Hi Team,
    Currently i am embedding a word document in winforms. I need to disble/hide/remove the quick access toolbar from the word, i was tried in different ways like below ways in C#  but it's not working .
    With oDocument.Application.CommandBars("Standard")'disable the standard toolbar
          .Enabled = False
          .Visible = False
     End With
    WebBrowser1.ExecWB OLECMDID_HIDETOOLBARS, OLECMDEXECOPT_DONTPROMPTUSER'toggle between "reviewing" and "standard"
    toolbar
    End Sub
    Any help would be highly appreciate.Thanks.

    Hi Ravindra
    The code you're trying to use is for the old "toolbar" GUI that was discontinued in the Office applications starting with version 2007. CommandBars is still present in the object model and does interact with the new "Ribbon" interface
    to a certain extent, but it's NOT used to affect visibility.
    The Ribbon GUI, introduced in Office 2007, is defined by "Ribbon XML" and cannot be affected by code running from outside the application interface, nor by code running in-process that's not part of the same "container" as defines the
    Ribbon XML.
    From the screen shot you provide, it looks like you want to work with a specific type of document ("Custom Letter")? If yes, then it would be best for you to create a template that contains the Ribbon definition you want to provide for that type
    of document. In order to suppress the QAT you need to use the "startFromScratch" command for the customUI which also means that the Ribbon XML must define the ENTIRE Ribbon interface you want to provide to your users.
    You'll find the basics about customizing the Ribbon in the three-part article "for developers". You can find links to that, as well as to other information concerning the Ribbon,here:
    https://social.msdn.microsoft.com/Forums/office/en-US/ba8c9d0b-7312-4503-8167-f2ef86f17435/information-on-the-office-fluent-ui-ribbon-for-developers?forum=officegeneral
    Cindy Meister, VSTO/Word MVP,
    my blog

  • OIM 11g R1 - Request Type Description Customization (Translation)

    Hello Experts,
    I'd like a little help to know if it is possible to customizate the following:
    OIM is using Browser locale to change the language on Web Console.
    Does any one know how to change the translation to the Request Type description (the list from where we need to choose) when we are creating a Request?
    Example:
    Self-Request Resource = Recurso de Auto-Solicitação (in Brasilian Portuguese - we'd like to change it)
    Self De-Provision Resource = Autocancelar Provisionamento de Recurso (in Brasilian Portuguese - we'd like to change it)
    We work with OIM 11g R1.
    Thanks.

    Excellent! Thank you very much!
    Edited by: 958794 on May 22, 2013 10:37 AM

  • Unknown Device Event Type from a router

    Hi,
    I just included my first router within the reporting devices and decided to take a look at the raw events coming in to the MARS. To my surprise I see just two types of events :
    - Generic IOS syslog
    - Unknown Device Event Type
    This second one looks like SNMP because every message begins with "SNMPv2-SMI::enterprises." and seems to contain OIDs and data. Is this normal or am I having some kind of problem? The syslog messages seem to be interpreted correctly; in fact they generated a few incidents when there were some problems on one of the interfaces. I'm worried that the SNMP messages (traps?) are not being understood.
    Thanks for your help,
    Joe

    Yes, I realize that. Unfortunately I don't have access to the router and I'll have to ask what has been configured. I was wondering why MARS sees this data as raw events, if indeed they are SNMP traps. Does MARS listen on port 162 UDP?
    Thanks,
    Joe

  • Javascript error in event handler event type = timeline

    Hi,
    I have a small EdgeAnimate projekt with version 1.5.0 and the local export works fine... I must include the package at a CMS and I update all paths to absolute paths and all files are loading...
    but I the animation dont play - I see at the javascript console the follow output
    javascript error in event handler event type = timeline   edge.1.5.0.min.js:143
    Springender Punkt: Rettungswagen - Der springende Punkt
    I dont found any solution... :-((

    Hi Scott,
    I have gone through your shared composition created in older verion of Edge.
    If you open the older composition html page in browser, there already have some of the error messages in the console as you mentioned above like
          Javascript error in event handler! Event Type = timeline.
    And as you said with the latest Edge, when you upgrade the old composition, some new error messages gets added to the existing ones.
    As in the latest Edge, the whole of runtime has been shake-up, some of the attributes has been removed and are added in different way.
    Example: To access timelines of a symbol:
         Old way:           sym.timelines['Default Timeline']
         New way:          sym.data[sym.name].timeline
    You need to make some modifications in index_edgeActions.js file like:
         1. Search & Replace "timelines['Default Timeline']" with "data[sym.name].timeline"
         2. And in the code taken from EdgeCommons.js, replace "getVariable("symbolSelector")" with "_variables["symbolSelector"]".
    Hope, these changes will remove the new JS issues you mentioned.
    hth,
    Vivekuma

  • Addon 9000000X failed with exception; Event type X

    Hi SDK experts,
    We had a problem with occurrence intermittent, something that we identified with relation on wait of response of event.
    The problem is:
    My addon need to submit XML files to some webservices. In some cases this files will be send on batches, what causes the response time to events on addon is to much large.
    In this cases, when the response time is much large, the B1 overthrow the addon.
    In compiled mode the message is not shown. This evidence was achieved on debug time.
    The error message is "Addon 90000002 failed with exception; Event type 6"
    The paleative solution was implement a thread to release the event. But threads on addons can be a problem.
    What the opinions?
    We need a solutions. Our addon is a market product for process accounting and fiscal.
    regards.
    Daniel Weissmann

    Hi,
    You may check this thread first:
    Addon Crashes
    Thanks,
    Gordon

  • Event Type Linkages - No receiver type

    We had an issue in our production server where users's were getting the "ambiguous workflow" error.  We found the culprit to be an additional entry in the Event Type Linkages (SWE2) that had NO recever type.  After we opened up the client, and removed the entry, the error went away.
    I know it's possible to enter a new entry in this table despite the erorr requiring the receiver type.  However, since this is a production box, access to data is extremely locked down, and there is not a way to directly modify this transaction. 
    Any ideas how this additional entry could have appeared?

    Hi Rick!
    Did you guys move any workflows from test/quality system to the production system? Usually, when we create starting events in workflows (using SWDD or PFTC), Event type linkages gets a new record and a transport gets created for the same. So it may have happened that a transport could have moved to Production with those changes.
    Hope this helps. Let me know if you have any clarifications.
    Regards,
    Anwar.

Maybe you are looking for