Event type linkage automatically deactivated - Urgent help

Hi,
I activated the Event type linkage for a PR approval Workflow template (a copy of WS00000038) using t-code SWETYPV, however the Event type linkage got automatically deactivated by the system. I have try to activate again for few times, same thing happen got deactivate automatically, any one have encounter this problem before, please help - Urgent.
thanks.

Hi ,
The mandatory Import parameter might be missing in event container. Event will be deactivated automatically because of these type of errors .
Please check if you are passing all mandatory import parameters.
Pls let me know if it worked.
Regards,
Ganesh.

Similar Messages

Event Type Linkages - No receiver type

We had an issue in our production server where users's were getting the "ambiguous workflow" error. We found the culprit to be an additional entry in the Event Type Linkages (SWE2) that had NO recever type. After we opened up the client, and removed the entry, the error went away.
I know it's possible to enter a new entry in this table despite the erorr requiring the receiver type. However, since this is a production box, access to data is extremely locked down, and there is not a way to directly modify this transaction.
Any ideas how this additional entry could have appeared?

Hi Rick!
Did you guys move any workflows from test/quality system to the production system? Usually, when we create starting events in workflows (using SWDD or PFTC), Event type linkages gets a new record and a transport gets created for the same. So it may have happened that a transport could have moved to Production with those changes.
Hope this helps. Let me know if you have any clarifications.
Regards,
Anwar.

Event type linkage through SWETYPV

Hi All,
       I have query, in the event type linkage (SWETYPV), if the receiver type is other than the standard task or the workflow template, then how it can be used? Like in one of the standard settings
Object Type: BUS2005 ,Event: DELETED, Receiver Type: SUBSCRIBE, ..
I wanted to know how this Receiver type(SUBSCRIBE) is linked with the event and the sub sequent receiver function module. Please help.
Regards
PSB

the object key will be passed through receiver function module via parameter OBJKEY on IMPORTING.
function sgossub_rec_fb_send_mail.
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(EVENT) LIKE SWETYPECOU-EVENT
*"     VALUE(RECTYPE) LIKE SWETYPECOU-RECTYPE
*"     VALUE(OBJTYPE) LIKE SWETYPECOU-OBJTYPE
*"     VALUE(OBJKEY) LIKE SWEINSTCOU-OBJKEY
*"     VALUE(EXCEPTIONS_ALLOWED) LIKE SWEFLAGS-EXC_OK DEFAULT SPACE
If the receiver type is a workflow or task, receiver functional module SWW_WI_CREATE_VIA_EVENT_IBF will use that receiver type as a workflow or task to trigger.
For SUBSCRIBE receiver type, receiver type is just a text. Actually you can put anything there
Chaiphon

Event type linkages

hi gurus ,
been contemplating with event type linkages(SWETYPV).I'll be using this in connection with IDOC.
Basically my requirement is to have a custom outbound IDOC and will be trigger upon creation/updates of sales order.
My question is how does the event type linkages works?where would I populate the table?what is the role of receiver/check FM in event type linkages.
Please help.

Hi,
Hope you have opened another thread for this?
Event Type Linkages are created through SWE2 and will be populating in SWETYPECOU, SWETYPEENA tables.
Receiver is something which handles when an event occurs. Example when and IDOC ends in an error there should be someone to process this or some should be intimated. The receiver decides on who has to be intimated. Check Function Module are used to trigger based on condition. You define the procedure or do your check to see if the receiver has to be started if yes then set subrc as 0 else 4. So when 4 the receiver will not be triggered.
Thanks,
Prashanth

Business objects and event type linkages...

Hi Experts,
Im a bit confused with business objects (swo1) and event type linkages(swetypv). Ive learned that business objects are used to trigger events and so how does event type linkages related to business object? Do I need to create business object or should I just search/look for the appropriate object needed?Please kindly explain to me the process or steps in using business object and event type linkages in related with idocs.

Hi,
Business objects neednot have to be created if your are fine with the standard method they have used in or the events yre available for you. If you need to cusomize it then you have to copy it to a subtype. Then do your modifications in it. Event type linkages are used to say which event is active for a Workflow. And if you want to trigger a Workflow based on certain conditions then you have to use either this or Start of Condition. The Error handling of workflow is also handled by Event Type Linkage. So whenvever you create a event linkage for a workflow you get an entry in Event Type Linkage.
Hope this would have thrown some light on you.
Thanks,
Prashanth

Event Type Linkages: Status "1 errors"

Hi,
we got an error in Event type linkages. One event type is on error and it can't be manually switched back to "No errors" because it's not modifiable.
The error occurs all of the sudden, the workflow could be triggered properly before.
Did anyone got an idea of what I can do?
The BOR type and event seems to be okay. The workflow too. Only the event background job wasn't running, but I restarted him.
Anyway I got this error.
Thank you in advance!

Hi,
with event job, you mean the event queue? this job isn't used that much anymore only in specific cases does it serve a purpose.
What you can do is go to transaction SWEQADM to see which events are in error, also check there who the workflow administrator is. This person/position/whatever should've received a message about the event being stopped.
To fix it you could activate the event-->wf linkage in a transport and import that in production, or in severe cases ask basis / authorization to open the production client for changesand reactivate the linkage. But only do that when you have found out the cause.
There is probably a valid reason why you want to stop the workflow whenever an error occurs in the event.
Kind regards, Rob Dielemans

Managing event type linkages

Hi, folks! I need your experience for a moment.
Could you tell me how could I know if a particular event type linkage of any business object type (say BUS2032) is activated or not in run-time, thru abap code?
Hope it was clear enough.
Thank you very much, people!

Little note: the option I am talking about and I want to handle, we can find it in the transaction SWETYPV.
Regards, friends.

Event Type linkage and settings of Event Administration Queue

Hi friends,
I have a scenario where there is an event linkage activated for a business object event, when i have checked the details of this type linkage then i found that
1 - ENABLE EVENT QUEUE check box is not clicked.
2 - BehaviorUpon Error Feedbak was set as System presetting.....
And In Event Administration Queue>BasicData>ReceiverErrorFeedback = DeactivationOfLinkage
So here my doubt is will the System deactivate the linkage if any error ll occur even if
ENABLE EVENT QUEUE check box is not clicked ?
Thanks Dev
Edited by: Dev on Nov 28, 2008 12:23 AM

Hi,
Check out these links.
these links will answer all your queries.
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/66/efa874b9b311d2a6010060087a79ea/frameset.htm]
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/c5/e4afe6453d11d189430000e829fbbd/content.htm]
If you still have any queries let me know
Regards,
Raj

Event type Linkages (SWE2)

Hi Friends,
I need to know about the 1) Use of "Linkage Activated" checkbox in SWE2 transaction.
2) Whether the "Receiver Function Module" will be called in the same session after successful completion of "Check Function Module" without any exception or it will be called in the same session. The reason y i ask this question is that, when i try to debug the Event create, it is calling the "Check Function Module", but after successful execution, the debugger is not going to "Receiver Function Module". Please explain in detail on this.

Check http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/5e073c8e56f658e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/d0/5e073c8e56f658e10000000a114084/content.htm
Kanagaraja L

How to debug FM used in event type linkage?

Hi experts,
I have actived below linkage by tcode SWETYPV.
BO BUS2032 ALECREATED ,
and I find the Receiver Function Module is PUR_ORDER_CREATE_VIA_SD_EVENT, can we debug this function module?
Thank you in advance.
Richard

Hi Richard,
Can you give us more details about the issue?
Actually we cannot debug the receiver function module when the event is occured. The reason is, its a background process.
As far as i know, its not possible to debug the receiver function module.
To check the event trace, use the transaction SWEL. It will show you whether the action triggered the event or not?
Thanks,
Viji.

INTEGER DATA TYPE and Numeric Oracle URGENT Help needed

Hello does any body knows if i run this statement of create table in oracle 9.2
what is maximum number of digit the test_num can stores....
create table test
test_num INTEGER NOT NULL
I have to reply to my client urgently..
Regards
Mahesh
Ramnarayan123

All the Oracle reference manuals are on-line at <http://tahiti.oracle.com>. A quick search on "INTEGER" will reveal the answer (38 decimal digits).
Justin

Urgent help!!!!!!Regarding the Credit Memo for oracle project customer invoices

Hi,
Can somebody help me in this issue
we have a requirement from the users that they dont want the system to apply
the credit memo automatically on the invoice when it released from the projects
Scenario1: Invoice already been paid now they want to create a credit memo,
system dont allow them to cancel the invoice the only way as per the theory is
create a negative invoice and adjust it but the issue here is when ever you
create a negative invoice it creates as invoice not credit memo which will be
confusing to the users.
in this case can we use billing extension to create the transaction type as
credit memo when ever the invoice has negative amount?
Or let me know if there is a way to perform this step?
Scenario2: Invoice is created but they dont want to create a credit memo
against that invoice since it gets applied automatically, the customer
requirment will be they want to apply the credit memo for any future invoices
as requested
Is there a wya to have a credit memo created with out auto applying to an
invoice, so that user can apply when ever they want
what is credit memo on accoutn how it works with these above scenarios.
sicne i tried setting up but the credit meo or concession is getting appled to
the particular invoice automatically
need urgent help required on this issue !!!!!
Regards
Lavanya

Hi,
For Scenario 1 you have two options:
1) Update the AR transaction type extension for project invoice- Identify negative amount invoice and change the transaction type to project credit memo. This will update the transaction type on negative invoices before they are interfaced to Oracle AR.
This is preferred option
2) Update AR invoice Pre-processor to do the same thing.
There is no standard setup which will allow you to change trx type of negative invoices.
For Scenario2 - I dont think there is any direct way to create a credit invoice from Projects and keep it unapplied (again, apart from creating a negative amount invoice). You can create a credit memo in AR and use it to apply against future invoices.
Regards
Kaushal

Activity types-- urgent help

Hello SAP Gurus,
I need urgent help. Every production cost center has two activities labor minutes and machine minutes which have been provided by the PP guy in routing. I have defined the two activity types and have assigned planned price to them in KP26 for each cost center.
But the planned cost of the production order is not coming when ever an order is saved. It is taking the material cost but not the planned activity cost or not showing up.
Please tell me what have I done wrong.
I will assign points immediately.
Thanks,
Elizaa

This is the error that I am getting:
No activity planning
Message no. KP 209
Diagnosis
No activity quantities are planned in controlling area AMAD for fiscal year 2008, version 0 and the objects you have specified.
System Response
The SAP System cannot calculate a price if no activity quantity exists. The iterative price calculation cannot therefore be processed.
Procedure
Plan activity quantities and activity input in controlling area AMAD.
Someone please please help me.
Regards,
Elizaa

Incorporating transaction types from F-43 to FB60...urgent help !!

Hey guys...i need urgent help...my client is upgrading from ECC.5 to ECC.6 and in process they will no longer be using F-43 . Now they want me to incorporate all the transaction types from F-43 to FB60. Can someone explain the process. Thanks in advance.

Dear Stiffler,
The Payment Method field (ZLSCH) is not controlled via field status.
This field cannot be set to required in the standard functionality in
FB60.
It means that for Vendor document entry for "payment method",
you can only achieve it by creating a validation rule at call-up
point 2.
Or You can insert it into a Payment Term by OBB8 and insert the Payment Term into Your vendor/customer master data.
I hope this helps.
Mauri

Event Type Descriptions - Mod Wheel / Quick Access Auto Help

I really just need some description for the possible event types you can assign to controllers in logic, like the mod wheel. For example, expression, portamento time... I don't know what i should be listening for when it comes to utilizing these controls. But I know some of these options would greatly enhance my samples (EWQLSO) in terms of reality (strings swelling instead of remaining stagnant). The manual mentions around 15 event types, and I was wondering if I could get some solid definitions. Some are obvious, but feel free to fill in the gaps, it would be much appreciated.
Also, I've had some trouble getting mod-wheel movement to show up in multiple windows in logic. Even if I do automation quick access assigned to the mod wheel, I get split information. For instance, the Arrange Window will record pitch bend data, but it will not be reflected in the Event List, or Editor, let alone these options in the Matrix window.
Any help would be great.

Please don't cross-post. It is considered very rude to do that here:
http://forum.java.sun.com/thread.jspa?threadID=5233033&messageID=9953169#9953169

Event type linkage automatically deactivated - Urgent help

Similar Messages

Maybe you are looking for