Event viewer error

Hello,
If this question was posted already please let me know.
I have a wireless WRT54GS ver. 6 router. My PC is wired to the router. When ever I start my computer I see the following in the event viewer:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x00271383D876. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
I have internet access and my home network is working but I am just curious if this error is anything.
Am using Windows 7 Pro 64 bit. I just upgraded the firm ware to 1.52.8
Any other information you may need to help me please let me know. Any info you can provide would be great.
Thanks
Solved!
Go to Solution.

Thanks for the help. The LAN card is on the motherboard. The board is a intel DP55KG. If I do disable the IPv6, will I loose any connection or what is the disadvantage of disabling the IPv6?
Thanks

Similar Messages

Event Viewer errors and warnings

How do I clear Event Viewer errors and warnings?

This one may help.
http://technet.microsoft.com/en-us/library/cc722318.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Event Viewer Error Reports

How do I send all my event viewer error reports from 3/1/15 to the manufacturer of my computer? IN the event viewer window there seems to be a lock on opening submenu to perform a copy and paste or a SEND option available. I have a WINDOWS 8.1
OPERATING SYSTEM.

You should be able to right click on each indivudual log "App, Sec, Setup, System, etc" and click on Save all events as.

IDS Event viewer error

Hi All
Please help me out with this .I am getting attached IDS Event viewer error while trying to install it .Please let me know the probable causes and how to rectify the same
Regards
Ankur

At what stage of installation are you seeing this error?
It appears that a SSL certificate has expired, or an applet has a digital signature based on a certificate that has recently expired.
If you can provide recreation steps then we can figure out what certificate is expiring, and determine the next steps in resolving your issue.
Without knowing anything else my best guess at this point is that the SSL certificate on your sensor has expired. If the sensor has been deployed in your network for over a year, then this jsut could be the standard expiration of the SSL certificate on your sensor. Try conneting from a web browser directly to your sensor. When your web browser connects it should warn you if the sensor certificate is expired. If this is the case then ssh or telnet to the sensor and execute: "tls generat-key" to enforce the creation of a new SSL certificate for your sensor.
If the error is not from an expired SSL certificate, then it is from other certificate or digital signature and we will need to try and recreate in our lab.
Once you provide us with re-create steps, then there is something you might try for a short term solution as we try to re-create.
You might try setting the date/time on your PC to a few days ago. The certificate appears to have expired on April 23rd so setting it back to April 20th may make the error go away. I am not positive this will work, but may be worth a shot if you need access immediately and can't wait a day or 2 as analysis is done. This is not a permanent solution and would just be a temporary workaround as we try to analyze what certificate is expiring.

Multiple Event Viewer Error Ids, Corrupt Catalogs, System not working right. Please help.

Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won't let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
me get my computer working right again. I have some important things to get done which I can't do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
any help I can get. Thank you,
WhiteFox42
I am not sure which one is more important.
Event id 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
(KB2468871).
Event id 11
Possible Memory Leak. Application (C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always
reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application
vendor for an updated version of the application.
Event id 455
taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:\User\App Data\Roaming\Microsoft\Templates\Local\Microsoft\Windows\WebCache\V01.log.
Event Xml:
Event id 505
wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" for read / write access failed because it could not be converted to a normal file. The open file operation
will fail with error -4005 (0xfffff05b). To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed. Writing to this file when it is compressed is not supported.
Event id 513
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
Event id 1000
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
Exception code: 0xc0000005
Fault offset: 0x00025f1d
Faulting process id: 0x1854
Faulting application start time: 0x01cf0735f0e5f0c7
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\system32\IEFRAME.dll
Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
Event id 1000
Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x00000000000035e1
Faulting process id: 0x1030
Faulting application start time: 0x01cf01b77867a358
Faulting application path: C:\Windows\system32\msiexec.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: f7253b17-6daa-11e3-b944-00215a2af202
Event id 1002
Computer:      w7mar-64 "I don't know why it has computer as this when it should not be."
Description:
The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
Event id 1008
The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
Event id 1008
Computer:      w7mar-64
Description:
An errorUser:          LOCAL SERVICE
occurred in initializing the interface. The error code is: 0x2.
Event id 1014
User:          NETWORK SERVICE
Computer:
Description:
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
Event id 1015
User:          N/A
Computer:      w7mar-64
Description:
Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID 1013 for further details
on this event.
Event id 1015
Failed to connect to server. Error: 0x8007043C
Event id 1018
The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1020
Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
Event id 1028
Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or Builtin\Administrators. The existing folder will be deleted and re-created with the appropriate security
settings.
Event id 1101
.NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) - Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
Event id 1500
The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
6 user registry handles leaked from \Registry\User\S-1-5-21-2959539970-205720217-4182857889-1000:
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Internet Explorer\Main
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies
Event id 3028
Context: Windows Application, SystemIndex Catalog
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3029
Context: Windows Application, SystemIndex Catalog
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3036
The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
Event id 3036
No protocol handler is available. Install a protocol handler that can process this URL type. (HRESULT : 0x80040d37) (0x80040d37)
Event id 4104
Description:
The backup was not successful. The error is: Access is denied. (0x80070005).
Event id 4228
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
Event id 4321
The name "WHITEFOXPC     :0" could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
Event id 4373
The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 4879
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
Event id 6000
The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Event id 6006
The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
Event id 7000
The Windows Audio service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration.
Event id 7001
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start.
Event id 7010
The index cannot be initialized.
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 7023
The Block Level Backup Engine Service service terminated with the following error:
%%-2147024713
Event id 7024
The Windows Search service terminated with service-specific error %%-1073473535.
Event id 7026
The following boot-start or system-start driver(s) failed to load:
aswKbd
aswRvrt
aswSnx
aswSP
aswTdi
aswVmm
discache
spldr
Wanarpv6
Event id 7030 & 7031
The dldw_device service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
Event id 7032
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
An instance of the service is already running.
Event id 7040
The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
Event id 7042
The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 8210
An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
Event id 9000
The Windows Search Service cannot open the Jet property store.
Details:
   0x%08x (0xc0041800 - The content index database is corrupt. (HRESULT : 0xc0041800))
Event id 10005
DCOM got error "1084" attempting to start the service MSIServer with arguments "" in order to run the server:
{000C101C-0000-0000-C000-000000000046}
Event id 10010
15 of these with different server codes which I can't copy unless I copy all the details.
The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
Event id 12348
Volume Shadow Copy Service warning: VSS was denied access to the root of volume \\?\Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}\. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
properly. Check security on the volume, and try the operation again.
Event id 15006
9 of these.
Description:
Owner of the log file or directory \SystemRoot\System32\LogFiles\HTTPERR\httperr1.log is invalid. This could be because another user has already created the log file or the directory.
Event id 31004
33 of tese.
The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
The End.
Kimberly D. White-Fox

Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
(alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
the computer was in normal mode then it can be disregarded.
You will find some general advice on interpreting Event Viewer reports here:
http://www.gerryscomputertips.co.uk/syserrors5.htm
Hope this helps, Gerry

Event Viewer - Error/Warning

Hi,
I am seeing the following errors on the subcriber Event Viewer system log. Does anyone know what is causing this.
Event Type: Error
Event Source: BROWSER
Event Category: None
Event ID: 8032
Date: 4/28/2006
Time: 10:12:19 AM
User: N/A
Computer: CCM_SUB
Description:
The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{81B27D00-C66E-4969-A4CA-A2E89101A90E}. The backup browser is stopping.
Data:
0000: 05 00 00 00 ....
and also this
Event Type: Warning
Event Source: BROWSER
Event Category: None
Event ID: 8021
Date: 4/28/2006
Time: 10:12:19 AM
User: N/A
Computer: CCM_SUB
Description:
The browser was unable to retrieve a list of servers from the browser master \\CCM_PUB on the network \Device\NetBT_Tcpip_{81B27D00-C66E-4969-A4CA-A2E89101A90E}. The data is the error code.
Data:
0000: 05 00 00 00 ....
Cheers,
Rafiq.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_troubleshooting_guide_chapter09186a008011b369.html#wp1047403
Browser Service: Every 2 Hours, an Error Occurs in the Event Log on the Subscriber
Symptom
Error Message The browser server has failed to retrieve the backup
list too many times on transport \Device\netBT_Tcpip (c96xxx)
The backup browser is stopping.
Warning: The browser was unable to retrieve a list of servers from the browser master \\AACCMP1 on the network \Device\netBT_Tcpip (c96xxx) the data is the error code.
Probable Cause
Cause indicates a NIC card problem. You need to upgrade the OS to a newer version.
Corrective Action
Procedure
Step 1 If you have an MCS-7830 and build the OS with the new 2000.1.2 OS installation, run the OS upgrade version 2000.1.3 to fix the NIC card problem.
If this is not your problem, verify the following actions:
Step 2 Ensure that your WINS address is correct.
Step 3 Ensure that Enable NetBIOS over TCP/IP is chosen.
Step 4 Ensure that the WINS address is correct on the master browser \\AACCM1.
Cheers
Please rate post if helpful.

Event Viewer Error Report ID: 23

Source:
Microsoft-Windows-Eventlog
Date:          06/04/2014 06:39:34
Event ID:      23
Task Category: Service startup
Level:         Error
Keywords:      Service availability
User:          LOCAL SERVICE
Description:
The event logging service encountered an error (res=1117) while initializing logging resources for channel Microsoft-Windows-Diagnostics-Performance/Operational.
1117 0x0000045D The request could not be performed because of an I/O device error. ERROR_IO_DEVICE
What device is this Event Viewer report referring to?
TIA, Gerry

Hi,
I/O device error can generate while reading or writing from a drive, disk, or portable media device.
To troubleshoot such error, please refer to
http://www.tech-faq.com/io-device-error.html
NOTE This response contains a reference to a third
party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Andy Altmann
TechNet Community Support

Event Viewer Error When Installing QuickTime in Windows 7

Recently I installed QuickTime Player Version 7.7 (1680.34) on 64-bit Windows 7 workstation. There was an error in the Event Viewer:
Faulting application name: MSiExec.exe, version: 5.0.7601.17514, time stamp: ox4ce792c4
Faulting module name: QuickTime.qts_unloaded, version: 0.0.0.0, time stamp: ox4e13ba08
Exception code: oxc0000005
Fault offset: 0x7287a9e9
Faulting process id: ox4f8
Faulting application start time: 0x01cd1e60e81cd4ab
Faulting application path: c:\windows\syswow64\MSiExec.exe
Faulting module path: QuickTime.qts
Report Id: 2708fa37-8a54-11e1-8bb1-d4bed98d5633
The QuickTime function is OK.
Any idea about this error?
The same error happens whenever I install /remove the QuickTime.
Thanks,
Linda

Faulting application path: c:\windows\syswow64\MSiExec.exe
Taken at face value, the 32-bit Windows Installer Service is throwing the error.
Doublechecking ... The QuickTime Player is successfully uninstalling and reinstalling for you, despite the error message?

Windows8 64 bit , EVENT VIEWER ERROR LOG

I just got a new windows 8- 64 bit notebook, I have only just set it up yet in event viewer I get lots of Error messages one is HP error ID 2146233088, some are marked
caution and others are critical and all seem to be under HP, I installed all windows updates and took out the 60 day trial of Norton internet Security 2013 and installed my own, my printer is set up with a USB cable wired, other than that I have only installed
Microsoft office home and student which I purchased for 3 computers from a retail
store, can anyone tell me why I would have so many errors showing up on a new computer.
Thanks.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

CRITICAL EVENT VIEWER ERROR CODES IN WINDOWS 8 OS HELP!!!!!

URGENT HELP NEEDED!! HP PAVILION G7 LAPTOP, PRE-INSTALLED OS: WINDOWS 8 UPGRADED TO 8.1 DOWNLOADED FROM WINDOWS. EVENT VIEWER SHOWING NUMEROUS ERROR ID'S #1 SOURCE: ESENT, EVENT ID: 532, WITH LEVEL:WARNING ON 1/11/14.
+
System
Provider
Name]
ESENT
EventID
532
Qualifiers]
0
Level
3
Task
1
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-01-11T21:09:31.000000000Z
EventRecordID
6382
Channel
Application
Computer
5CD3182MR2
Security
EventData
LiveComm
5976
C:\Users\user\AppData\Local\Packages\microsoft.windowscommunicationsapps_8wekyb3d8bbwe\LocalState\LiveComm\f3234cb42b8f428e\120712-0049\:
C:\Users\user\AppData\Local\Packages\microsoft.windowscommunicationsapps_8wekyb3d8bbwe\LocalState\LiveComm\f3234cb42b8f428e\120712-0049\DBStore\livecomm.edb
3907584
(0x00000000003ba000)
8192
(0x00002000)
36
STATES FAULTY HARDWARE, AND THIS IS A NEW LAPTOP! THERE ARE OTHER ID'S LISTED: EVENT ID:1530, SOURCE: USER PROFILE SERVICE, LOG NAME: APPLICATION, LEVEL:WARNING, 3 USER REGISTRY HANDLES LEAKED FROM WINDOWS\SYSTEM 32, I DONT
KNOW WHATS GOING ON?? IT IS MY NORTON 360? I SEE IT SHOWS :3 user registry handles leaked from
\Registry\User\S-1-5-21-3960481396-744839641-3680832521-500: Process 312
(\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key
\REGISTRY\USER\S-1-5-21-3960481396-744839641-3680832521-500 Process 752
(\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened key
\REGISTRY\USER\S-1-5-21-3960481396-744839641-3680832521-500\Software\Microsoft\Windows\CurrentVersion\Uninstall
Process 312 (\Device\HarddiskVolume3\Windows\System32\svchost.exe) has opened
key
\REGISTRY\USER\S-1-5-21-3960481396-744839641-3680832521-500\Software\Microsoft\Windows\CurrentVersion\Internet
Settings\Connections
PLEASE HELP OR GIVE ME ADVICE, THANK YOU!!

Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to skydrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem.
The work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Did you ask this on another site??? It looks very familiar.
Wanikiya and Dyami--Team Zigzag

Event Viewer errors Windows 8.1

In the Event Viewer Windows 8.1 have found the following errors from the source Kenel-EventTracing :
The following sessions could not start due to the error 0xC000035 :
Pku2uLog
NegoLog
IDLListenLog
HomeGroupLog
The laptop Windows 8.1 is in Home Group with other laptop Windows 7 and all looks ok with this Home Group.
What kind of errors are the a/m and what can be done to correct.
Thank you in advance for the attention and reply. EWAGOSIA

You may run the System File Checker tool (SFC.exe) to scan your system files and to repair missing or corrupted system files.
S.Sengupta, Windows Entertainment and Connected Home MVP

Windows 7 event viewer error after 9.1 update

*Log Name: Application*
*Source: Bonjour Service*
*Date: 4/11/2010 8:06:33 PM*
*Event ID: 100*
*Task Category: None*
*Level: Error*
*Keywords: Classic*
*User: N/A*
*Computer: CHEVYSALES*
Description:
*288: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)*
*Event Xml:*
*<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">*
<System>
*<Provider Name="Bonjour Service" />*
*<EventID Qualifiers="0">100</EventID>*
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
*<TimeCreated SystemTime="2010-04-12T00:06:33.000000000Z" />*
<EventRecordID>6692</EventRecordID>
<Channel>Application</Channel>
<Computer>CHEVYSALES</Computer>
*<Security />*
</System>
<EventData>
*<Data>288: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)</Data>*
</EventData>
</Event>
above message in my event viewer since i updated to this lousy release....
have had bnjour messages before but back with vista last year...new machine running solid and steadt windows 7 64 bit with a reliabilty rating from administrative tools of 10 for past months prior to this update...anyone seeing this and if so is there a fix?
first few backups took for ever on my iphone 3gs..... most go quickly again now.
don't sync too many things other than videos.
tia

Unfortunately there have been multiple issues with the new version of Bonjour which was distributed with iTunes 9.1. Apple knows & is apparently working on a fix but for now you have a few options which might help.
1) If you don't need the Bonjour service (i.e. for Apple TV) go into system services (run msconfig from a run command & navigate to the 'services' tab), uncheck Bonjour & reboot. That should disable Bonjour & allow iTunes to run properly.
If you need Bonjour then either
1) Disable Bonjour as above, delete it & then download a copy of Bonjour 1.x from the web (you'll have to google for it, last time I posted the link, Apple removed my post). Install that one & all should be well.
2) Uninstall iTunes 9.1 & Bonjour, get a copy of iTunes 9.0.3 and install that one. That will give you the previous version of Bonjour as well. One warning, if you've opened iTunes since upgrading to 9.1, 9.0.x won't be able to open your library since 9.1 updated the library structure. Check in the iTunes folder for one called "Old libraries" or previous library or something similar & you'll have to open that to get your collection to load.
Good luck,
Lil

T61p - event viewer - errors

Out of pure curiosity and interest if some of you had the problem and solved it
The event viewer gives three recurrent errors
Unable to initialize the security package Kerberos for server side authentication. The data field contains the error number. Which looking on the web seems to be ignored, although i would very much prefer to find a way not to produce it from the start
The Parallel port driver service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. Is there a service i could swtich off to prevent this errot happening or should i disable at the hardware set up F11
The third is more a nuisance rather that anything, i installed once VirtualCloneDrive and deinstalled it and there is still at the start an attempt to launch it (The following boot-start or system-start driver(s) failed to load: VClone) If anybody could help me to remove it i'd appreciate
Regards

This one may help.
http://technet.microsoft.com/en-us/library/cc722318.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

AD Event Viewer Error: 1053

Hello,
I hope this is in the right forum....
I'm getting the following error in the event viewer. It is then followed by a warning, which is pasted below as well.
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          1/14/2014 12:21:49 AM
Event ID:      1168
Task Category: Internal Processing
Level:         Error
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      SPROCKET.sprocket.superbikeschool.loc
Description:
Internal error: An Active Directory Domain Services error has occurred.
Additional Data
Error value (decimal):
1053
Error value (hex):
41d
Internal ID:
300068c
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
    <EventID Qualifiers="49152">1168</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>9</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-14T08:21:49.537Z" />
    <EventRecordID>14117</EventRecordID>
    <Correlation />
    <Execution ProcessID="752" ThreadID="1044" />
    <Channel>Directory Service</Channel>
    <Computer>SPROCKET.sprocket.superbikeschool.loc</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
    <Data>1053</Data>
    <Data>41d</Data>
    <Data>300068c</Data>
</EventData>
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          1/14/2014 12:21:49 AM
Event ID:      2886
Task Category: LDAP Interface
Level:         Warning
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      SPROCKET.sprocket.superbikeschool.loc
Description:
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that are performed
on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds, configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection, and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this directory
server will log a summary event once every 24 hours indicating how many such binds occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed for an extended period, it is recommended
that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category to level 2
or higher.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
    <EventID Qualifiers="32768">2886</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>16</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-14T08:21:49.584Z" />
    <EventRecordID>14118</EventRecordID>
    <Correlation />
    <Execution ProcessID="752" ThreadID="1044" />
    <Channel>Directory Service</Channel>
    <Computer>SPROCKET.sprocket.superbikeschool.loc</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
</EventData>
</Event>
I'm running Windows Server 2008 (not R2). The computer is a DC running only one domain, which only has about 6 computers on it.
Thanks,
Pete

For the first event, it is an internal error and I would recommend contacting Microsoft PSS to investigate about it if it does not appear.
For the second event, please refer to that: http://technet.microsoft.com/en-us/library/dd941829(v=ws.10).aspx
Just make sure that your AD-based systems / applications support LDAP signing before enabling it.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

TopologyDiscovery.vbs event viewer error

Hi,
I have noticed the following error in event Viewer on the management server.
TopologyDiscovery.vbs : Query "SELECT [Id], [BaseMonitoringClassId], [ManagedTypeViewName] FROM [dbo].[ManagedTypeView] WHERE [Name] = 'Microsoft.Windows.CertificateServices.CARole.2008'" did not produce valid results. Please verify your SQL. Cause:
The SELECT permission was denied on the object 'ManagedTypeView', database 'XXX', schema 'dbo'.
I'm not too sure if this is causing a specific error but wanted to know if it something that i should pay attention to?
Thanks

Hi,
According to the error message, The SELECT permission was denied on the object 'ManagedTypeView', database 'XXX', schema 'dbo', I would like to suggest you check the SELECT permissions on the object in the database.
We may compare the permission with other tables and check out the differences.
Regards,
Yan Li
Regards, Yan Li

Event viewer error

Similar Messages

Maybe you are looking for