Event Viewer Windows 8.1 - Windows Error Reporting

Have the following repeating error in Event Viewer / in the level of information/ :
Event Name:Application
Sorce: Windows Error Reporting
Data: 2015-03-19 14:53:50
Identification:1001
Category : none
Description:
Errors batch 91181006742, typ 5
Name of event: PDUWICA
Reply : no available
File Cab: 0
P1: 101
P2: 1.9
P3: 6.3.0.0
P4: 1045
P5: 29
P6:
P7:
P8:
P9:
P10:
I would appreciate explanation of this event and help in this respect.
Thanks in advance for reply and best regards, Ewa

Hi EWAGOSIA,
After all, I am supposing this is an information or warning level event, does your computer have symptoms such like frequently hanging, random freezing or blue screen? If not so I guess it's nothing to worry about.
I still think it is caused by bad compatibility of some applications or drivers. You could start with update your video driver and DirectX.
If the error still persists update all device drivers and keep your system up to date for good measure.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Application Nividia Stream error and warning in the Event Viewer Windows 8.1

Have found the following repeating error and warning in the Event Viewer Windows 8.1 64 bit reg.the application Nividia Stream:
1. The error :
"Can not find the description of event 2001 identification from
the source NvStreamSvc.
Either the component causing this issue is not
installed in the local computer or installation is broken. You can install or
repair the component in the computer.
Information to the event :
NvStreamSvc
Failed continue stopping [6] "
2. The warning :
"Can not find the description of event 2002 identification
from the source NvStreamSvc.
Either the component causing this issue is not
installed in the local computer or installation is broken. You can install or
repair the component in the computer.
Information to the event
NvStreamSvc
SSAU process ID 7820 did not exit, Termination.
[6]”
I would appreciate the advice how to fix it.
Thanks and best regards,
Ewa

Hi,
Thanks for your reply.
Have the lastest updated Nividia driver : version 347.88 - shall I uninstall and install again ?
Shall I make express installation /as usually/ or advanced ?
Reg. Nividia Stream service - shall I disable this service in services.msc ?
The software - now have Nividia GeForce Experience updated to the version 2.4.1.21 on 30th
March.
Would appreciate your further assistance and help.
Thanks and best regards, Ewa

Windows Update and the Windows Error reports

31/08/2014 08:41
Windows Error Reporting
Fault bucket 124661653, type 21
Event Name:
WindowsUpdateFailure
Response: Not available
Cab Id: 0

Problem signature:
P1:
7.6.7600.320
P2:
80246002
P3: D67661EB-2423-451D-BF5D-13199E37DF28
P4:
Scan
P5: 101
P6: Unmanaged
P7: 
P8: 
P9: 
P10: 

Attached
files:

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.6.7600.320_888a386ad31bd7d883fbf736bf547a8a1bd5bd9c_150a7995

Analysis
symbol: 
Rechecking for solution: 0
Report Id: 8809d3a9-30ea-11e4-8d08-5442495ff252
Report Status: 0
Does the reference to
D67661EB-2423-451D-BF5D-13199E37DF28
refer to Windows Update Agent and is a scan to find and down the updated version simply failing?
TIA, Gerry

Hi,
This structure is a general Windows Error report structure. There are different meanings for different types.
For the details, you could read this article:
WerReportSetParameter function
http://msdn.microsoft.com/en-us/library/windows/desktop/bb513626(v=vs.85).aspx
For your specific error, we could get these:
P1: 7.6.7600.320 means Windows agent version.
P2: 80246002 means the exact error code
P3: D67661EB-2423-451D-BF5D-13199E37DF28
should be the specific Windows Agent GUID.
Let's verify it:
Look for this GUID in your Windows Update log file located in C:\Windows\WindowsUpdate.log. There you could verify if it's a Windows agent.
Karen Hu
TechNet Community Support

How does Windows Error Reporting identify your application?

When an error occurs and you are requested to send an error report, how does Windows Error Reporting service identify your application so that you can view the reports in your dashboard?
How do I register my applications for Windows Error Reporting?
To get a Windows logo an application must only handle expected errors and allow Windows Error Reporting (WER) to handle unexpected errors according to an article at
http://blogs.msdn.com/b/amitava/archive/2007/07/24/certified-for-windows-vista-logo-test-case-faq-test-case-32.aspx

An article How can a company get access to Windows Error Reporting data? at
http://blogs.msdn.com/b/oldnewthing/archive/2005/08/10/449865.aspx hints that the link is a registered code signing certificate.
https://sysdev.microsoft.com/en-US/Desktop/member/services/UpdateDigitalSignature.aspx

Where is the System queued windows error reporting?

Hi Guys,
I would like to increase the free disk usage to more than 15% on the mailbox server Drive C. After check and discuss, we are to achieve this goal that move the system queued windows error reporting to other place. However, i can't find this file after
read the relevant documents and can't find this file in Drive C. Could you help me found path of this file? it's urgent. i will waiting at online.
note: Our boss is not allow to delete this file. i am so sorry.

Hi,
You can check the Windows Error Reporting Service queue in the paths below:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue
C:\Users\Username\AppData\Local\Microsoft\Windows\WER\ReportQueue (For Users)
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Susie,
This is Daniel.
I note that This file take 18.2GB through view disk clear up, but these all folder just take 800M, I would like to they are not in their proper place.
but I would like to thanks for you help.

Fault bucket -Windows Error reporting

Fault bucket 3981204210, type 5
What does type 5 signify?
TIA, Gerry

Hi,
I found this WIKI
Event ID 1001: Windows Error Reporting, from this article I see a sentence:
The bucket table (that is,
the Fault bucket type) for phony error bucket numbers is 5.
The article above also gives an explanation for type 1 to 4:
1:Crash32 buckets
2: Setup buckets
3: Crash64 buckets
4: Generic reports
Hope this might help
Best regards
Michael Shao
TechNet Community Support

Windows Error Reporting service connection failure

For some reason unknown to me, the Windows Error Reporting service has now decided that it cannot send crash reports to Microsoft.
I get the above error when I try to "Check for a solution" from Review Problem Reports Dialog. "Trying again later"
does not work. I've tried several recommended "fixes" including scanning for corrupted system files, making sure the WER service is running, and, checking firewall issues. Sending crash reports used to work, so, I'm at a loss as to why this is happening.
Can anyone shed some light on a possible cause?
Gort, Klaatu, Barada Nikto

Relating to the WER-Diagnostics, Vaseem posted some useful steps to resolve that issue here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/possible-heap-corruption-detected-exception-code/0657809a-a78b-48c7-9e6e-ac8ca97522c2
Here are the steps suggested:
Method 1:
Run System File Checker tool and check for missing or corrupted files follow the steps in the link:
http://support.microsoft.com/kb/929833
Method 2:
Open performance troubleshooter. Follow the steps in the link:
http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter
Method 3:
If the above step fails follow these steps:
Step a:
Restart computer in safe mode. Follow the steps from the link:
http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
Step b:
If safe mode works then try in clean boot. Follow the steps from the link:
http://support.microsoft.com/kb/929135
Follow the step 7 from the article to “Reset the computer to start as usual”, after performing the clean boot troubleshooting.
Also follow the steps in the link:
http://support.microsoft.com/kb/937093
Note: This above article is applicable for Windows 7 as well.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

Deleting all users WER (Windows error reporting) files

Hi,
I am using windows server 2008 R2 (Standard), I have created around 120 users in this server, yesterday i found that my C drive is full, after checking all i found around 30GB is used for Windows error reporting files, Please help me to delete This files
Please, i cant delete all files one by one...

For what it's worth, this is the script I use to find Windows Error Reports that have not been sent, and delete archived Windows Error Reports:
It's not currently doing per-user error reports, as we don't have people logging into the servers, typically.
Karl
<#
.SYNOPSIS
Find-WER - Finds Windows Error Reports that have not been sent to Microsoft.
.DESCRIPTION
This script finds Windows Error Reports that have not been sent to Microsoft.
This script also deletes archived Windows Error Reports.
.NOTES
File Name: Find-WER.ps1
Author: Karl Mitschke
Requires: Powershell V2
Created: 12/16/2011
.EXAMPLE
C:\PS>.\Find-Wer.ps1
Description
Finds Windows Error Reports on the local computer.
.EXAMPLE
C:\PS>.\Find-WER -Computer Exch2010
Description
Finds Windows Error Reports on the computer Exch2010.
.EXAMPLE
C:\PS> Get-ExchangeServer | Find-WER
Description
Finds Windows Error Reports on all Exchange servers.
.EXAMPLE
C:\PS> $cred = Get-Credential -Credential mitschke\karlm
C:\PS>.\Find-WER.ps1 -ComputerName (Get-Content -Path ..\Servers.txt) -Credential $cred
Description
Finds Windows Error Reports on all servers in the file Servers.txt.
.PARAMETER ComputerName
The Computer(s) to search for Windows Error Reports. If not specified, defaults to the local computer.
.PARAMETER Credential
The Credential to use. If not specified, runs under the current security context.
#>
[CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact='Medium')]
param (
[parameter(
Position = 1,
Mandatory=$false,
ValueFromPipeline=$true)
[String[]]$ComputerName=$Env:ComputerName,
[Parameter(
Position = 2,
Mandatory = $false,
ValueFromPipeline=$false)
$Credential
BEGIN{
#region PSBoundParameters modification
if ($Credential -ne $null -and $Credential.GetType().Name -eq "String"){
$PSBoundParameters.Remove("Credential") | Out-Null
$PSBoundParameters.Add("Credential", (Get-Credential -Credential $Credential))
$PSBoundParameters.Remove("WhatIf") | Out-Null
#endregion
$ReportPath = "C:\\ProgramData\\Microsoft\\Windows\\WER\\ReportQueue"
$ArchivePath = "C:\\ProgramData\\Microsoft\\Windows\\WER\\ReportArchive"
$FoundReport = $false
$DeleteFailure = $false
PROCESS {
$PSBoundParameters.Remove("ComputerName") | Out-Null
foreach ($StrComputer in $ComputerName){
$Count = @((Get-WmiObject Win32_Directory -Filter "Name= '$ReportPath'" -ComputerName $StrComputer @PSBoundParameters).GetRelated('Win32_directory') |? {$_.name -match $ReportPath}).Count
if ($Count -gt 0){
Write-Warning "There are $Count Windows Error Reports on $StrComputer."
$FoundReport = $true
Else{
Write-Output "There are no Windows Error Reports on $StrComputer."
$Archives = @((Get-WmiObject Win32_Directory -Filter "Name= '$ArchivePath'" -ComputerName $StrComputer @PSBoundParameters).GetRelated('Win32_directory') |? {$_.name -match $ArchivePath})
if ($Archives.Count -gt 0){
Write-Output "Deleting Archived Windows Error Reports on $StrComputer."
foreach ($Folder in $Archives)
if ($pscmdlet.ShouldProcess($($StrComputer), "Deleting '$($folder.name.split("\")[-1])'")){
$Return = $Folder.Delete()
if ($Return.ReturnValue -ne 0){
$DeleteFailure = $true
if ($DeleteFailure -eq $true){
Write-Warning "Could not delete all Archived Windows Error Reports on $StrComputer."
END {
If ($FoundReport){
Write-Warning "Remember to run the Action items on the servers."
else{
Write-Output "There are no Windows Error Reports."
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Photoshop CS6 EXTENDED Install Error [WINDOWS] *error report included*

Greetz,
I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
ERROR: DF050: ARKServiceControl::ModifyService failed while saving previous service configuration.(Seq 6)
ERROR: DF050: ARKServiceControl::ModifyService failed for service SwitchBoard. Error 2 The system cannot find the file specified.(Seq 6)
ERROR: DW063: Command ARKServiceControlCommand failed.(Seq 6)
ERROR: DF059: ARKServiceControl::StartService failed to start service SwitchBoard. Error: 3(Seq 1)
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 1 Exit Code: 3 Service Specific Exit Code: 0(Seq 1)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
Thanks in advance.

Thank you for the reply. I will try the steps listed in the document you linked me to. In case any of the procedures works, I will mark your post as "Correct".
Thank you, once again.

Connecting Ipod to Windows-Error report!

I've never had a problem with my Ipod or Itunes before and i no i havent done anything to cause any problems.
The other day i plugged my Ipod into my computer and instead of conecting to Itunes an error report came up that says IpodService Module:iPod Service module has encounted a problem and needs to close.
It happenes everytime and i dont no how to fix it. I dont even no what a service module is.
My iPods being recognised in My Computer but it wont actually connect to my itunes.
HELP!!

Ok unistalling...or trying to unistall was a bad idea because when i did it all messed up and i had to restore it because it wouldnt reinstall.

ADT: Web Dynpro view/window error "Failed to create the part's controls"

Hi, all
Most of the things in my ADT work fine (e.g. programs, structures, domains), even the Web Dynpro Componentcontroller can be edited.
However, with Web Dynpro view and window I get this error message: "Failed to create the part's controls".
In SAP GUI everything works fine.
Why could this happen and what can I do?
My system details:
32-bit Windows 7
Eclipse Luna Release (4.4.0)
ADT from https://tools.hana.ondemand.com/kepler, according to these instructions: SAP Development Tools for Eclipse.
SAP GUI 7.30, patch level 9.
SAP_ALL authorizations
Java: SE, version 7 update 60
Activated services (SICF): wdy_aie_vd_preview, toolsdocu, docu
The Java error log in Eclipse is quite long. It starts with:
java.lang.IllegalStateException: java.lang.IllegalArgumentException: No enum constant com.sap.adt.wda.controller.semanticfs.common.ControllerFileServices.ControllerObjectTypeEnum.WDYNWZ
    at com.sap.adt.tools.core.ui.editors.AdtFormEditor.addPages(AdtFormEditor.java:222)
    at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138)
    at com.sap.adt.tools.core.ui.editors.AdtFormEditor.createPages(AdtFormEditor.java:1251)
    at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:362)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.createPartControl(CompatibilityPart.java:140)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityEditor.createPartControl(CompatibilityEditor.java:99)
    at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.create(CompatibilityPart.java:321)
    at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
As it is not popular to post long logs unnecessarily, I will skip the rest of it for the moment - let me know if it could help and I will post it.
Thanks for help!
KR,
Igor

Hi Ponraj,
note applied without any problem.
I'm still facing some difficulties accessing a WD component, maybe you could suggest me how to solve/proceed:
in Eclipse Luna, I can access now a WD but "Layout" tab doesn't work - HTTP 403 Forbidden - Service cannot be reached. I guess it's a missing configuration, could you help me out on this?
EDIT: This one is solved; I just missed to activate a service in SICF (WDY_AIE_VD_PREVIEW).
That Eclipse module however seems not to be very stable; I tried to open a standard SRM WD view (wd component /SAPSRM/WDC_DO_SOCO_GAF_1, view V_AO_SOCO_GAF_1) and that resulted in the message:
500 SAP Internal Server Error
ERROR: Conversion of type C LENGTH 255 to type TABLE OF DEEP_STRUCTURE not supported. (termination: RABAX_STATE)"
is there a way, from the Methods tab, to access directly to a particular method's implementation? The only way I found is going manually under the IMPLEMENTATION tab and CTRL+F with the method's name.
is there any way to access to a particular enhancement made on the WD? Using SapGUI, there's a special "vortex" button to switch on a specific enhancement, but under Eclipse I can't find the alternative command.
I know we're getting a bit OT with respect to the topic, anyway if there's a guide that could help clarifying my doubts please, share that documentation
BR,
M.

Event Viewer errors Windows 8.1

In the Event Viewer Windows 8.1 have found the following errors from the source Kenel-EventTracing :
The following sessions could not start due to the error 0xC000035 :
Pku2uLog
NegoLog
IDLListenLog
HomeGroupLog
The laptop Windows 8.1 is in Home Group with other laptop Windows 7 and all looks ok with this Home Group.
What kind of errors are the a/m and what can be done to correct.
Thank you in advance for the attention and reply. EWAGOSIA

You may run the System File Checker tool (SFC.exe) to scan your system files and to repair missing or corrupted system files.
S.Sengupta, Windows Entertainment and Connected Home MVP

Event Viewer Error Reports

How do I send all my event viewer error reports from 3/1/15 to the manufacturer of my computer? IN the event viewer window there seems to be a lock on opening submenu to perform a copy and paste or a SEND option available. I have a WINDOWS 8.1
OPERATING SYSTEM.

You should be able to right click on each indivudual log "App, Sec, Setup, System, etc" and click on Save all events as.

ITunes no longer runs since buying Match. Within ten seconds of opening, it crashes, everytime. Firewall off, latest version of iTunes reinstalled, Windows updates/etc. on, no other software running at the same time. Error-report just says reinstall.

I can no longer use iTunes whatsoever.
I'm hoping to get a refund for the $25 wasted on match if my PC isn't compatible. But how the **** do I get iTunes as a whole to stop crashing?
I'm on Windows 7 with AMD C-50 processor and 2GB RAM, 250GB hard disc.
Never had an issue with Apple products before today.
Windows error reporting claims that "an update to iTunes addresses the issue", but not only did I have 10.5.3 already, I went ahead and reinstalled it, too, and the 64bit version just for the **** of it in case that'd make difference. No luck.
I mean, surely, the fact that this is only happening to me means it is a problem with my system. But I don't suppose its the usual stuff that way, way inexperienced computer users end up on these forums about. No viruses (are there PC viruses that only affect iTunes match? sounds far fetched.) No firewall issues. Not running outdated software. I imagine its my CPU, my hardware, thats just not compatible with Match.
Anyways. The crash occurs about 20% into the progress bar of gathering info about your library for match. When restarting, it asks to log off and log back in to the itunes store. A few times I was able to do that, by getting to the little X and cutting off match before it could crash (still logging out and logging back in made no difference), but now the speed at which it gets to the 20% and crashes is so fast I can't beat it to it.
Do you suppose the Apple store at the mall, since I just got a 4S with Apple Care+ might be able to help me, or would there be a fee? I can't afford a new computer right now, and if mine just could never work with match period, might I get a refund?

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

ERROR on Event Viewer

Hi All
I have installed and configured EPM-11.1.1.3 Hyperion Foundation, Essbase, Planning, Reporting & Analysis and ERP Integrator. The Configuration was successful without any error. Financial Management, Startegic Finance and Performance Scorecard are installed but not configured as it is not needed.
Now my Event viewer giving me the below error.. what could be the cause..?
***** ERROR *****
Invalid setting data was retrieved from Hyperion® Shared Services Registry, contact your Strategic Finance representative for assistance.
Many Thanks

Hi,
I would like to install Hyperion Planning 11.1.1.3 in Windows server.
I need some details wheather I can go for Windows 2003 or Windows 2008 ( 32 bit or 64 bit).
Could you please proivde me some installation document & configuration doc for Hyperion Planning 11.1.1.3?
Edited by: user9172122 on Mar 31, 2011 10:34 PM
Edited by: user9172122 on Jun 22, 2011 2:59 AM

Event Viewer Windows 8.1 - Windows Error Reporting

Similar Messages

Maybe you are looking for