EventID: 1006 Source: MSExchange Mailbox Replication
Hi All,
On my Exchange 2010 i see the following Events in the Application Log.
The Mailbox Replication service was unable to process mailbox move requests in a mailbox database.
Database: MDB01
Error: Couldn't find system mailbox 'SystemMailbox{e0e13cb6-bd1c-4a67-b483-3fe8db9d3631}' in Active Directory.
But when i look at the Arbitration Mailboxes it's there.
[PS] C:\Windows\system32>Get-Mailbox -Arbitration | fl Name
Name : FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042
Name : SystemMailbox{A89BCF10-3F08-41C2-AC86-68E35C08D972}
Name : SystemMailbox{e0e13cb6-bd1c-4a67-b483-3fe8db9d3631}
Any ideas out there?
Regards Andres
-- MCSE 2003 MCSA 2003 Messaging MCITP: Enterpise Administrator MCTS: Windows Server 2008 MCTS: Exchange Server 2007 Configuration MCTS: Microsoft SQL Server 2005 VCP - VMWare Certified Professional
Hi Andres,
The arbitration mailboxes in your product environment are not created by a correct way. I suggest you delete all of them and recreate them.
1. Delete those AD accounts.
2. Run Setup.com /PrepareAD. The arbitration accounts will be recreated after this step.
3. Enable those mailboxes with the following commands.
- Enable-Mailbox –Arbitration –Identity “SystemMailbox{1f05a927-…}”
- Enable-Mailbox –Arbitration –Identity “SystemMailbox{e0dc1c29-…}”
- Set-mailbox –Arbitration –Identity “SystemMailbox{e0dc1c29-…}” -DisplayName “Microsoft Exchange”
Then please test the issue again. Thanks,
Elvis
Similar Messages
-
MSExchange Mailbox Replication warning
Hello All,
Looking for some help here.
Getting these warnings that are referring to a recovery database that was created to restore a mailbox and has since been removed.
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: Missing database (026eca3b-2899-4c05-9bea-cbc5736fd93a)
Error: Database '026eca3b-2899-4c05-9bea-cbc5736fd93a' doesn't exist.
Simple environment, single mailbox server, no DAG at this point..
What am I missing?
Thanks,
JasonHi Jason,
As S.Nithyanandham suggested, please check if the problematic database is removed cleanly using ADSIEdit, since the Microsoft Exchange Mailbox Replication service is still looking for it. If the problematic database exists in ADSIEDit, remove it and then
restart the Microsoft Exchange Mailbox Replication service and check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
HI all,
I ran into a problem with one of the servers in my DAG. Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server. The DAG continued to function on the other server. So this particular
DB01 had only some test accounts in it so I removed the database copy. Unfortunately the removal must not have completed correctly.
After recovering the needed space in the partition, I tried to recopy the database and it failed. So I deleted the entire database from the active server and it successfully removed it from the active server. Now on both the servers the database
is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists. I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
of the database (failed redundancy) but there should be zero copies.
This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists.
Can you point me to the location to clean this up?
Log Name: Application
Source: MSExchange Mailbox Replication
Date: 02/25/2011 2:00:07 PM
Event ID: 1006
Task Category: Service
Level: Warning
Keywords: Classic
User: N/A
Computer: email1.domain.com
Description:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: DB01
Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x3EB
Lid: 26937
Lid: 21921 StoreEc: 0x3EB
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 22086
Lid: 27206
Lid: 17990
Lid: 16966 StoreEc: 0x8004010F
Lid: 31433 StoreEc: 0x8004010F
Lid: 8620 StoreEc: 0x3EB
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x3EB
Lid: 26297
Lid: 16585 StoreEc: 0x3EB
Lid: 32441
Lid: 1706 StoreEc: 0x3EB
Lid: 24761
Lid: 20665 StoreEc: 0x3EB
Lid: 25785
Lid: 29881 StoreEc: 0x3EB
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Mailbox Replication" />
<EventID Qualifiers="32772">1006</EventID>
<Level>3</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
<EventRecordID>181576</EventRecordID>
<Channel>Application</Channel>
<Computer>email1.domain.com</Computer>
<Security />
</System>
<EventData>
<Data>DB01</Data>
<Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x3EB
Lid: 26937
Lid: 21921 StoreEc: 0x3EB
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 22086
Lid: 27206
Lid: 17990
Lid: 16966 StoreEc: 0x8004010F
Lid: 31433 StoreEc: 0x8004010F
Lid: 8620 StoreEc: 0x3EB
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x3EB
Lid: 26297
Lid: 16585 StoreEc: 0x3EB
Lid: 32441
Lid: 1706 StoreEc: 0x3EB
Lid: 24761
Lid: 20665 StoreEc: 0x3EB
Lid: 25785
Lid: 29881 StoreEc: 0x3EB </Data>
</EventData>
</Event>Hi
This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases.
Restarting the service will clear the cache.
Maybe it is the simplest way to solve it.
If it doesn’t work, you can try cmd to check it.
Get-MailboxDatabase : Can you find the database which you delete?
Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database. -
Since demoting a child domain a few days ago, Exchange 2013 is still trying to contact it and as a result generating errors in the application event logs. I had a similar problem which I solved by removing some old migration batches, now I have a problem
with the Microsoft Exchange Mailbox Replication service.
The event logged is:
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '0b6c0f5a-0563-48e2-8b97-e0781c6cc69a'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for
domain 'admin.riddlesdown.local'.. --> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or
configured incorrectly DNS server.
The domain doesn't exist in AD Sites and Services, I have removed all traces from DNS but this is still occurring. When I run Get-ADServerSettings | fl it reports no trace of the domain or a DC that was previously in it.
How can I stop these events occurring and is it likely to be causing something else not to work correctly.
We are running Exchange 2013 CU1No, that didn't work. Here are more details:
Source: MSExchange ADAccess (EventID: 2130)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Exchange Active Directory Provider could not find an available domain controller in domain admin.riddlesdown.local. This event may be caused by network connectivity issues or configured
incorrectly DNS server.
Source: MSExchange ADAccess (EventID: 2119)
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=2280). Error DNS_ERROR_RCODE_NAME_ERROR (0x8007232B) occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain admin.riddlesdown.local
The query was for the SRV record for _ldap._tcp.dc._msdcs.admin.riddlesdown.local
Common causes of this error include the following:
- The DNS SRV records required to locate a domain controller for the domain are not registered in DNS. These records are registered with a DNS server automatically when a domain controller is added to a domain. They are updated by the domain controller
at set intervals. This computer is configured to use DNS servers with following IP addresses:
10.59.100.7
10.59.100.8
fec0:0:0:ffff::1Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::2Microsoft.Exchange.Directory.TopologyService.exe
fec0:0:0:ffff::3Microsoft.Exchange.Directory.TopologyService.exe
- One or more of the following zones do not include delegation to its child zone:
admin.riddlesdown.local
riddlesdown.local
local
. (the root zone)
Source: MSExchange Mailbox Replication Service (EventID: 1121)
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '87f4b926-0621-43d3-afeb-fe475ee6d850'
Database GUID: '23258311-ad29-41c2-a842-522f48baa267'
Error: Unable to read from Active Directory. --> The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
--> Unable to find a suitable directory server for domain 'admin.riddlesdown.local'..
Something is cause the Exchange server to go looking for our old domain, but what and why? -
Hi Guys,
a few issues all relating to AD/Exchange Setup, Causeing migration issues.
quick overview:
1. installed new server (Server 2012 R2), installed exchange 2013 install completed properly, issues logging into ecp and owa, ssl certs werent created, created manually didnt solve. - scrapped that server deleted from adsi exchange administration servers
(time spent troubleshooting was 5 days)
2. fixed ca issues, re-installed server installed exchange 2013, /preparead ,system mailboxes created migration mailbox created, create mailbox db, system mailboxes are there if checked with get-mailbox -arbitration
Try to migrate, migration mailbox not found in organization (accounts were there, made sure change user password on logon was not ticked on the account and never expire was ticked, account was disabled like it should be too so no go.
delete all system accounts from ad, recreate with /preparead, enable them according to articles:
http://technet.microsoft.com/en-us/library/gg588318%28v=exchg.150%29.aspx
http://www.telnetport25.com/2013/01/quick-tiprecovering-from-a-missing-migration-mailbox-in-exchange-2013/
http://social.technet.microsoft.com/wiki/contents/articles/5317.recreate-and-enable-missing-arbitration-user-accounts-and-mailboxes-in-exchange-server-2010.aspx
http://social.technet.microsoft.com/wiki/contents/articles/6874.how-to-recreate-system-mailbox-federatedemail-discoverysearchmailbox-in-exchange-2010.aspx
get-mailbox -arbitration found all mailboxes, check w/o -arbitration and discovery mailbox was there too.
3. Tried migration again no errors in ecp, migration not starting, encountered above error id's
Error 2002 - MSExchange Migration
error info ('Migration.MigrationMailboxNotFoundException|The migration mailbox for the organization is either missing or invalid.
Error 1006 - MSExchange Mailbox Replication (ps: no dag's setup yet either)
-> error info ('The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: CL1-3_Main-DB
same error for each db on the server with different mailboxes
Error: Couldn't find system mailbox '6d5f301b-7323-47c1-85eb-a76a01b9b3c0' in Active Directory.')
Error: Couldn't find system mailbox 'f6ba51f8-c076-42e9-b00f-014a1c6b3634' in Active Directory
Error: Couldn't find system mailbox 'SystemMailbox{eae9aad5-0984-440d-b37c-7a399961e171}' in Active Directory.
Error: Couldn't find system mailbox '8c6d0335-af32-41e3-86b1-e4c15fd14a23' in Active Directory.
SystemMailbox{eae9aad5-0984-440d-b37c-7a399961e171}' is in Active Directory and mail enabled according to above articles.
also received this error id 1006 - MSExchangeDiagnostics
error info ('The performance counter '\\CL1-3\LogicalDisk(HarddiskVolume17)\Free Megabytes' sustained a value of '207.00', for the '15' minute(s) interval starting at '8/22/2014 7:12:00 AM'. Additional information: None. Trigger Name:DatabaseDriveSpaceTrigger.
Instance:harddiskvolume17')
I don't want to reinstall again as i feel that would just add wood to the fire... can anyone help diagnose this?
been trying to fix this myself for over a month.
Thanks!!Hi,
Even if you think re-installation is annoyed, I still suggest perform the re-installation.
Because fix this issue also annoyed.
Remove the Exchange server and use ADSIedit to clear it up.
Also remove the Windows server 2012 from AD.
Then re-install Windows server 2012 and Exchange 2013 server via articles from TechNet.
Thanks -
Hello all,
We migrated our Exchange server from 2003 to 2010. After the mailbox move requests were finished we had one that was stuck. We basically skipped it as we had a lot of other things to finish over the weekend. Here we are a year later, the old exchange server
is gone and so is an old DC. I am receiving an error every four minutes in event viewer.
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '3e46b7cb-2ac0-42c1-98e8-57517a19ee40'
Database GUID: '5c6c573b-4f45-4ce3-b296-11cf69c2e2b6'
Error: Unable to find 'OLD Domain Controller' computer information in domain controller 'OLD Domain Controller' to perform the suitability check. Verify the fully qualified domain name..
I have checked in EMC for move requests. None are listed. I have checked the DCs listed in EMC properties. Old DC is not listed.
I also ran these commands in shell to attempt to cancel the stuck request.
Get-MoveRequest -MoveStatus Completed;Pending;InProgress;Failed;CompletedWithWarning;Suspended;Queued;CompletionWithProgress : Remove-MoveRequest
NO changes. Still throwing error. Any suggestions? I also tried using the guid and shell to look at the move request. Systems replies no such request.Hello,
Please try to restart iis services to check the result.
If the issue persists, I recommend you ping you DC server on your exchange server to check if your exchange server can communicate with your DC server.
If there are other DCs, please try to use set-adserversettings cmdlet to specify a DC for your exchange server.
Set-AdServerSettings
http://technet.microsoft.com/en-us/library/dd298063(v=exchg.150).aspx
Besides, please install the lasted rollup to check the result.
Cara Chen
TechNet Community Support -
Hello,
We have a multi domain parent child AD domain infrastructure and now we upgraded our exchange from Exchange 2007 to Exchange 2013. Since last few days, we see the below error on the mailbox server event viewer.
EVENT ID : 1121
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '93a7d1ca-68a1-4cd9-9edb-a4ce2f7bb4cd'
Database GUID: '83d028ec-439d-4904-a0e4-1d3bc0f58809'
Error: An Active Directory Constraint Violation error occurred on <domain controller FQDN>. Additional information: The name reference is invalid.
This may be caused by replication latency between Active Directory domain controllers.
Active directory response: 000020B5: AtrErr: DSID-0315286E, #1:
Our Exchange setup is in parent domain, but we keep on getting this error for various domain controllers in each child domain in the same site. We then configured one of the parent domain domain controller on Exchange. Still we are getting this error for
the configured parent domain DC.
Verified the AD replication and there is no latency or pending stuffs.
Any support to resolve this issue will be highly appreciated. Thank you in advance.
Regards,
Jnana R DashHi,
In addition to Ed's suggestion, I would like to clarify the following things for troubleshooting:
1. Please restart IIS at first.
2. If the issue persists, please ping your DC on your Exchange server to check if Exchange can communicate with DC.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Every morning receive Event Source MSExchange Common ID 4999
Every morning at 2/2/2012 2:06:02 AM
for weeks now we receive Event Source MSExchange Common ID
SBS 2011
Standard – Exchange 2010 => build 14.01.0355.002 (Update Rollup 6 for Exchange Server 2010 SP1)
Event Details:
Watson report about to be sent for process id: 12000, with parameters: E12, c-buddy-RTL-AMD64, 14.01.0355.001, BPA, M.E.Data.Directory, M.E.D.D.DSAccessTopologyProvider..ctor, S.IO.FileLoadException, 72f, 14.01.0355.001. ErrorReportingEnabled:
False
This is an Intel machine so we are not sure why there is “AMD64” in the details - This Event does not seem to cause any problem that we can detect.
Anyone tried
- Exchange Server 2010 SP2 December 4, 2011 Build 14.2.247.6 on a SBS2011 Standard yet? -
Since one of the KB articles – I found says -
Maybe -
http://support.microsoft.com/kb/2447629 (Rollup 3 but we have 6)Hi,
It seems that the issue is related to the special characters in the database name cause an
IndexOutOfRangeException exception. This exception crashes the
MSExchangeServicesAppPool application pool.
For more detailed information, you could refer to the article below:
Title: Event ID 4999 is logged on an Exchange Server 2010 Client Access server (CAS)
URL:
http://support.microsoft.com/kb/2665115
From the KB article resolution, you need to obtain Interim Update (IU) by contacting Microsoft Customer Service and Support.
Regards,
James
James Xiong
TechNet Community Support -
Restore source system without replication
Hi,
Normally one would do a restore of a source system after it has been refreshed with RSA1.
The "downside" is that it also do a replication of the datasources.
We want to split the procedure and do the restore of the source system without replication and the replication itself separately. Are there any transactions, FMs, reports, ... to achieve these tasks separately?
EddyEddy,
I found out about that, but i never tried it, it is an interesting program, but i don't know how if it will ask whether a datasource need to be 3.x or 7. I guess if you execute as a background job it will not ask.
Regards,
Jorge Diogo -
Exchange 2013 Mailbox Replication Service not installed
I have two Exchange 2013 Exchange CA servers running in a HA/Load Balance environment. Both are missing the Mailbox Replication Service. I didn't have any errors at any point during my installation. I look at the list of services on the
server and they're simply not there.
If I go to c:\program files\Microsoft\Exchange Server\v15\Bin the exe and config files are there. I tried just clicking the exe, but nothing changed. I need to be able to import mailboxes, so this is critical. I'm sure it is critical for
other reasons too.
Anything I can do here?Hey,
It's a default behavior in Exchange 2013. Mailbox Replication service runs on MBX server role. You can review architecture of Exchange 2013 on below mentioned link.
http://blogs.technet.com/b/marwahasamir/archive/2012/08/28/what-s-new-in-exchange-2013.aspx
Pls mark this as answer if it resolves your issue. Thanks.
Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365 -
Event ID 8365, app log error, source MSExchangeAL
I had this error show up in my app log early this morning:
Event ID 8365, source MSExchangeAL, text "Could not read the Security Descriptor from the Exchange Server object with guid=B661C17D309B914BB1AC85C1CFF9ADD8. As a result the Proxy Address Calculation RPC interface will not be available on the local Exchange Server."
I'm not sure if I should be concerned about this or not. I only have one Exchange Server, and it has a different guid. It's possible that the above-referenced guid belongs to the old Exchange 2003 server I migrated from and subsequently decommissioned, but I can't tell because that object doesn't exist in AD anymore (at least as far as I can tell). Is there a way to search for a guid and find out what object it's attached to?I'm getting an event ID 8365 error in the app log on my Win Server 2008 R2 Std Edition server running Exchange Server 2010 Standard Edition. The Exchange organization was migrated from Exchange 2003, and the 2003 server has since been decommissioned.
The source for this error is MSExchangeAL, and the text associated with it is "Could not read the Security Descriptor from the Exchange Server object with guid=B661C17D309B914BB1AC85C1CFF9ADD8. As a result the Proxy Address Calculation RPC interface will
not be available on the local Exchange Server." The error occurs every few days, sometimes a couple times in one day, but I haven't discerned a pattern yet. I'd love to find out what that guid refers to, but can't figure out how to look that up,
so if anyone can enlighten me about that, I think that'd help. Of course, a solution to the whole issue would be great too. Thanks. -
Good Day all,
Stretched dag between site a and site b. Cas array at each site. Mailboxes primarily are located in site a unless there is a major outage then the dag flips to site b. setup two archive databases, one in site A on a non replicated partition
of the dag server and one in site B on a separate mailbox only server.
All exchange servers are patched to the latest sp and rollup.
site a has no issues at all, everything i import queues up and processes with no problems
at site b two imports will process and then stop until i restart the microsoft exchange mailbox replication service on the cas server. No errors no nothing just lots of move request sitting in the queue.
considering i have an insane amount of psts to import there does anyone have any suggestions besides setting up a task to restart the imicrosoft exchange mailbox replication service every 15 minutes?
thanks for your help in advanceYeah I know from my research when I was setting up the dag you were not a fan of the stretched DAG but it works for us really well and passed all fail over tests that we ran on it <knocking on wood>.
Yes its running but it stops working after one session. I have had success in raising the transfer count from 2 to 5 but I can't really go much higher without taking down the server. the problem is when I am transferring someone with hundreds
of PSTs I have to babysit it...which sucks..
anyway, thanks for your help and have a great day :) -
Event 9217 source MSEXchange Tansport
I have exchange 2010 and I got error with event number 9217 source MS Exchange Transport
More than one Active Directory object is configured with the recipient address
IMCEAEX-ADCDisabledMail@mydomain. Messages to this recipient will be deferred until the configuration is corrected in Active Directory
how can fix the problem ?Hi,
From your description, the issue is related to the legacyExchangeDN, I recommend you use the following cmdlet in Windows PowerShell to clear it and check the result.
Get-ADObject -LDAPFilter "(&(objectClass=user)(objectCategory=person)(legacyExchangeDN=ADCDisabledMail))" -Properties LegacyExchangeDN | Set-ADObject -Clear LegacyExchangeDN
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Creating exact mailbox replication
We are using Exchange Server 2007 SP2. We have one user for whom we want exactly replicated mailbox. That is if there are 10 mails in Sent Items, 4 in Inbox and 2 in Deleted, then same should be the case with the replicating mailbox.
We tried doing this with transport level mail forwarding, however all mails gets forwarded to Inbox of the replicating mailbox. We want to move any mail sent by our user to Sent Items of the replicating mailbox. Is such configuration possible? If not in 2007
is it possible in other versions?Hi,
From your description, I would like to verify if you want to achieve the following thing:
Let user A see all the items in user B's mailbox.
If yes, you can grant user A full access permission to user B's mailbox using the following cmdlet.
Add-MailboxPermission -Identity "user B" -User "user A" -AccessRights Fullaccess -InheritanceType all
If I have misunderstood your concern, please let me know.
Best regards,
Amy Wang
TechNet Community Support -
Hi all,
4 Exchange Servers (2 DB + 2 CAS NLB Cluster) all Exchange 2010 SP1
Outlook work fine.
If I delete a message in OWA i became the following errors:
Internet Explorer:
Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 0.
Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 0
Firefox:
Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 302.
Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 302
Event ID 1006 MSExchange Mailbox Replication
Fehler: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Before SP1 it worked fine.
Can somebody help me ?
Kind regards AndyHi,
First, I would like to confirm the following questions:
1. Does the issue occur on certain user mailbox via OWA or each user mailbox?
2. Which OWA folder’s email cannot be deleted, Inbox, Sent Items or each folder?
3. Which version of operating system is installed on the client machine, Windows XP, Windows Vista or Windows 7?
At this stage, I suggest you temporarily disable firewall and anti-spam for a test. If the emails still cannot be removed via OWA, please refer to the following article
and use isinteg tool to check and repair Information Store.
Description of the Isinteg utility
Thanks.
Novak Wu-MSFT
Maybe you are looking for
-
I washed my nano with my jeans in the washing machine. It still works when I use external power, but not on the battery. I've charaged it, but it doesn't hold the charge. Sugggestions?
-
Anyone else having trouble with iphone accessing app store
anyone else having trouble accessing the app store on iphone this weekend.
-
I purchased a 25 song album but only 4 songs downloaded. Who do I contact?
-
How to post good receipt for an inbound delivery with HU in the stock?
Hello, We have an inbound delivery of a purchase order with 10 Handling Units inside on. The HU's has been put in a storage bin (by transport order + confirmation) before a good receipt has been posted for the whole delivery. Due to this it's not pos
-
Multiple fade/hide/show effects - spry
I have release notes that I am putting on a web page. I have 4 versions of the release notes and I already have buttons on the top of the page. what I am trying to do is when you click the button, it shows the release notes for that version. I can't