EventID 2001 after SP1 install

Hi.
After upgrading to SP1 for Exchange 2013, I keep getting this error:
Event 2001, MSExchange RPC Over HTTP Autoconfig
A transient failure has occurred. The problem may resolve itself in a while. The service will retry in 00:00:15. Message:
Filename:
Error: Cannot add duplicate collection entry of type 'add' with unique key attribute 'path' set to 'C:\Windows\System32\RpcProxy\RpcProxy.dll'
'It does not seem to be causing any problems, but it is annoying to have this error log every 15 seconds.
Unfortunately I do not know anything about IIS, but it seems to be where problems is.
Anybody know how to fix this?
Regards
Jens Hyllegaard

I had this error on my new exchange 2013 install for a client.
After migrating a number of users over and testing OWA (send & receive) i assumed all was well, one of the batches had finished so i asked the user to open up outlook, but it was throwing up U/N & P/W box, even with typing in the correct details
it was not accepting anything, then not being able to connect.
After a lot of hours troubleshooting this issue (Exchange 2013 is new to me!) i found that the RPC to HTTPS feature was not installed (this is required for outlook anywhere to
run, which connects outlook to exchange 2013). After finding this i installed this feature and thought job done.
Logged back onto the users machine and still had the same error, after more troubleshooting i found this event ID in my exchange log's. Every 15 seconds this was popping up, so after removing the RPC to HTTPS feature, rebooting the server and re-installing
this has cured the issue for me!
Thought i would post up to prevent anyone else spending there evening looking through exchange 2013 logs!
Regards
Mike

Similar Messages

Configuration Manager Cannot Connect to the Site After SP1 Install

I've been working on this all morning and can't seem to get anywhere on it. I've updated SCCM 2012 to SCCM 2012 SP1 and SQL Server 2008 to SQL Server 2008 SP3 CU4 and I can no longer connect to the site database. I've checked though the SQL settings as well
as SPN settings and everything checks out. I've looked at the SMSAdminUI log and to me it looks like SCCM can't even see the site database.
[4, PID:4948][01/28/2013 09:49:03] :System.Management.ManagementException\r\nProvider load failure \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'ISD'";
ProviderName = "WinMgmt";
\r\n
[4, PID:4948][01/28/2013 09:49:03] :Transport error; failed to connect, message: 'The SMS Provider reported an error.'\r\nMicrosoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException\r\nThe SMS Provider reported an error.\r\n
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.Connect(String configMgrServerPath)
at Microsoft.ConfigurationManagement.AdminConsole.SmsSiteConnectionNode.GetConnectionManagerInstance(String connectionManagerInstance)\r\nConfigMgr Error Object:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'ISD'";
ProviderName = "WinMgmt";
Error Code:
ProviderLoadFailure
\r\nSystem.Management.ManagementException\r\nProvider load failure \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecQuery";
ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'ISD'";
ProviderName = "WinMgmt";
\r\n
[4, PID:4948][01/28/2013 09:49:03] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String methodClass, String methodName, Dictionary`2 methodParameters, Boolean traceParameters)\r\nManagementException details:
instance of __ExtendedStatus
Operation = "ExecMethod";
ParameterInfo = "SMS_ObjectLock";
ProviderName = "WinMgmt";
\r\n
I tried to re-compile smsprov.mof and I get the following error (Yes, I was logged on as Admin with elevated rights):
Microsoft (R) MOF Compiler Version 6.2.9200.16398
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
Parsing MOF file: E:\SCCM\bin\X64\smsprov.mof
MOF file has been successfully parsed
Storing data in the repository...
An error occurred while processing item 3 defined on lines 29 - 37 in file E:\SC
CM\bin\X64\smsprov.mof:
Error Number: 0x80041026, Facility: WMI
Description: Class has instances
Compiler returned error 0x80041026
Is it possible there is something wrong with my WMI? I'm not really sure where to go from here and I'm dead in the water. Any help would be greatly appreciated!

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

CR2008 will not start after SP1 was downloaded and installed

Just wanted to post this message about CR2008. I didn't find a "installation problem" forum, so I'll post this here.
I have just begun using CR2008. New install worked fine. After a couple of days, I downloaded and ran SP1 for 2008. No problem with the SP1 installation process.
But when I attempted to start CR2008 after the SP1 install, I received a cryptic error message about not being able to start this or that DLL, etc.
I rebooted, etc, to no avail.
So, today I've uninstall CR2008 and I am going to only reinstall CR2008 without the SP1.
I looked for problem issues on the forums, but did not find much.
So I guess the SP1 problem that I experienced is very rare...? I'd appreciate any links or advice on this.
Thanks very much,
Dave

Thanks for the reply. Unfortunately, I have uninstalled CR2008 -- everything -- and I cannot reinstall the basic CR2008 package. It keeps giving me a series of errors and finally the installation is aborted.
Don't know what I''m doing wrong. I have sent a request for help to customer service...
Dave

K8N Diamond - Bluescreen after Win XP (SP1) Install

Hi. After building my system today I installed Win XP (SP1). The pre-install and graphical install went fine with no errors. On the first boot after the install, the Win XP logo appears for 5 seconds, there is then a quick flash of bluescreen then the system resets. The system is booting off of an Adaptec 29160 SCSI Controller with SCSI HDs. IDE is enabled in the bios for DVD & DVD Writer and the SATA controller is disabled in the bios. I did not use the Nvidia or Silicom SATA drivers during the initial OS install since I had disabled the onboard SATA/RAID controllers.
If I boot the system and boot into safe mode rather than normal I can get into Windows but there isn't any decent logs so far to go on without some additional work.
Is there something I've missed out ? I've done a quick search but couldn't find any related posts on the forum. I've listed my spec below.
Thanks for any help.
KN8 Diamond
2 x 512MB Dual Channel EL PC-3200 OCZ Platinum Rev2
OCZ Powerstream 600W PSU
Adaptec 29160 Raid Controller
Gainward 6800 Ultra Golden Sample
Creative Audigy 2 ZS Platinum Pro

Hi. I'm just going to start removing/moving hardware and carry out more testing, but I've booted into safe mode and justed the error settings so that I can actually read the error. The Windows stop error is 0x0000009C MACHINE_CHECK_EXCEPTION. I've just completed a MEM86 test and had no errors on the 2 x 512 Sticks.
I'll adjust some of the hardware and if that doesn't make any different the only bits it leaves are the CPU and motherboard.
Thanks again.

TF10121: The path '' is not found or not supported. Type or select a different path. After SQL2012 install and Solution upgraded to VS2010

I have recently upgraded a solution from vs2008 to vs2010. This solution happens to contain several .rptproj file (SSRS 2008R2 reports). I was able to upgrade the solution after I installed SQL2012 (which installed the necessary templates
into vs2010).
However whenever I open the solution the Output window now pops up and continuously lists the same error (shows output from Source Control - Team Foundation).
TF10121: The path '' is not found or not supported. Type or select a different path.
I have tried reinstalling Team Explorer SP1, and VS2010 SP1, but with no change.
If I unbind the solution from source control the messages go away. Rebind and they return.
The problem doesn't always start straight away, it may take a few solution explorer clicks.
Opening an rdl into the editor seems to halt the messages, until I go back to clicking in solution explorer (similarly the issue doesn't always re-occur first click).
E.g.
TF10121: The path '' is not found or not supported. Type or select a different path.
TF10121: The path '' is not found or not supported. Type or select a different path.
Audit.rdl has been automatically checked out for editing.
Then no errors until going back and clicking in solution explorer (which is using auto hide)
[See also:
http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/8c7cc472-3ac1-4800-8199-5f4b41414748]
Does anyone else out there share this problem or more importantly a solution/work around?

Hi Evanw21,
Based on the current information, it seems to be the known issue described in the following KB article:
FIX: TF10121 error when you right-click a project file of the project or a folder in the project in Visual Studio 2010
The root cause of the problem is that we hold onto a stale reference to the old project and get back an empty string when we try to get its directory path. To resolve this problem, contact Microsoft Customer Support Services to obtain the hotfix. For a complete
list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Besides, there is one easy workaround. If we close the solution and re-open it prior to attempting to re-add the project, we should be able to add it successfully.
References:
TF10121
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Single client cannot get updated virus defs after client install

I have a single Windows XP workstation that cannot get it's new virus defs after the install of the FEP 2010 client. I have uninstalled and reinstalled with the same error.
Have attempted to stop and restart FEP and Automatic updates with no luck.
Event Log Errors
#1 Windows update agent Event ID 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Definition Update for Microsoft Forefront Endpoint Protection 2010 - KB2461484 (Definition 1.99.1245.0).
#2 Source Microsoft Antimalware Event ID 2001
Microsoft Antimalware has encountered an error trying to update signatures.
New Signature Version:
Previous Signature Version: 0.0.0.0
Update Source: Microsoft Update Server
Update Stage: Install
Source Path: http://www.microsoft.com
Signature Type: AntiVirus
Update Type: Full
User: NT AUTHORITY\SYSTEM
Current Engine Version:
Previous Engine Version: 0.0.0.0
Error code: 0x80070643
Error description: Fatal error during installation.

This is old post and there have been several changes in FEP, now the successor of FEP is System Center Endpoint Protection (SCEP) and several things been improved. Try reproduce your issue in SCEP and if problem persist, please post it as a new question.

(Windows Server 2003) Cannot run SQLSERVERAGENT service under non admin user after SP1 Installation

Hi All,
I need a hand here, referring to this knowledge base on Microsoft (http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811) i applied this knowledge base, and it worked, the MSSQL and SQLSERVERAGENT have run under local non admin account.
But after i installed SP1, MSSQL service is ok, but SQLSERVERAGENT wont run. The warning message is : "Some service run and then stop if they have no work to do."
Is there any way i can install SP1 but in the same time run SQLSERVERAGENT under local non admin account?
Your assistance will be much appreciated
thank you very much in advance.
Felix Adhitya

Please go to the windows services list and check that the service is configured as start Automatic first
1. run -> services.msc -> look for a service named "SQL Server Agent" -> proporties
2. make sure the startup type is Automatic
3. start the service again.
4. If it stop then post for us the full error message from the sql log file
5. move to the "Log On" tab and check what Log on you are using (this will be used for next step if startup type Automatic did not help, therefore write this information).
[Personal Site] [Blog] [Facebook]

Interface bouncing after S219 install on 4250 IDS/4.1

I installed the S219 updates on one of our client's IDSes. After the install, the eth0 (sniffing) interface started bouncing. I'm getting the following errors constantly (i.e. 2300 in 2 hours)
evError: eventId=1084139354956127055 severity=warning
originator:
hostId: xxxxx.blah.com
appName: kernel
appInstanceId:
time: offset=-300 timeZone=EST 1141813394351496000
errorMessage: name=errSyslog e1000: eth0 NIC Link is Down
evError: eventId=1084146174954547201 severity=warning
originator:
hostId: xxxxx.blah.com
appName: kernel
appInstanceId:
time: offset=-300 timeZone=EST 1141816178210210000
errorMessage: name=errSyslog e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex
Just a thought, but perhaps it somehow got forced in 1000/full? Should I try setting it to auto/auto? If so, do I do that from the service account? And what commands would I issue?
Thanks all!

The error message is generated by the sensor the sensing process (SensorApp) should always be running. If it is not, you do not receive any alerts. If the interface is down, make sure the sensing port is connected properly:
a. Make sure the sensing port is connected properly on the appliance.
See the chapter on your appliance in the Cisco Intrusion Detection System Appliance and Module Installation and Configuration Guide Version 4.1.
b. Make sure the sensing port is connected to the correct SPAN or VACL capture port on the IDSM-2.

"Application failed to evaluate" during OSD after SP1 Upgrade

Hi,
Today i upgraded out configuration manager from 2012 rtm to 2012 sp1. The update process completet without any errors but now i'm unable to install application during osd. The first application crashed with the message:
Installation job completed with exit code 0x00000000
Execution status received: 16 (Application failed to evaluate )
in smsts.log
I know that there are some gotcha's regarding application installation during osd after sp1 upgrade. I already did the following steps:
- Update the deployment type of the application in my osd task sequence
- Re-Add the Network Access Account
- Removed the first application in the task sequence to see if the problem is application related
- Checked the option "Allow this application to be installed.." in the application properties
- Reboot my site servers
I can install application via Software Center without any problems, also the software updates are working normally.
Thanks in advance

Hi,
How are things going? Please let us know if there is any progress.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

Some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

At a total loss on how to fix PSCS6 after CSCC Install

I am assuming that the CC version of Photoshop had something to do with this as it started just after the install and they are both doing this.
The very next image I edited after the install was gif_01.gif. I saved it to: project/005885/site/image/gif_01.gif.
Soon I started working on another graphic and went to save it, say.... desktop\graphic.jpg
The warning box pops up, Warning, saving this image will overwrite the image gif_01.gif do you want to continue.
Now, everytime I save a jpeg it has this message. No other images do it, except of course gif_01.gif if in that folder.
Not a huge deal except for it is having a bit of a water board effect and is starting to feel like someone died every time it pops.
Shift+Ctrl+Alt+DBLClick = Reseting up my whole work environment and still having the gif issue. Oh ya, another issue with it is every time I save a jpeg to any file it also save that gif image to the file. It is an 1800x2400 pixel image so it will really suck to have a few thousand extra on the drives.
Any clues would be great. I hate to uninstall and reinstall as I am software heavy on this machine and it is used for many tasks. Sometime reinstalling a single program turns into setting the machine back up and it is a 3 day process.
Windows 8 Enterprise
CS6 - All Apps +(
MS Visual Studio Ultimate
Netbeans
Eclipse
MS Office Professional 2013 +Skype +Sharepoint Builder +Forms Tools
Core FTP
PUTTY (3 app pack)
Windows Defender
Spybot (dormat-manual scans and immunizations)
Windows Firewall
Everything file searcing app
Skype
Custom Apps (In House, Air Apps)
All of the internet browsers (at least the most popular dozen or so)
Mobile simulator, graphics pad software, video capture etc. Several more apps but none that should effect this)
AMD 8 Core
2xGTX 570 (Quadro 6K soon)
64gb Ram
SSD eSata III 512gb x 4 in Raid 10
1200watt PSU
Also, I have cleared as many of the temp files and etc. I use 2 256gb SSD eSata II disks for scratch and temp files for CS6 with a 300GB HDD for video
Every program system wide and all drivers are 100% up to date with the latest versions.
Also, I just realized it only does it when Save for the WEB is chosen and not when Save As and then JPEG is picked.

I would hazard a guess you copied your plugins from cs6 to the cc installation which is not recommended!
Don't think the advice to reformat and reinstall is the best way and don't know why it was suggested!

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

After I install itunes my windows 7 - 64 bit machine will not boot and I have to use Restore to boot with a date before I installed itunes

After I install itunes on my windows 7 - 64 bit machine it will not reboot and I need to restore to a date before itunes was install. How do I fix this?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

How did my desktop appear on another computer after Leopard install?

I have a Mac G5 connected by ethernet to a cable company. I bought a MacBook for Chicago which is 2,000 miles away. After upgrading my G5 with Leopard I physically took the Leopard CD to Chicago and installed it on my MacBook in Chicago where I have wireless (router) After the install, my desktop was duplicated on this MacBook from the G5 in California. I never had these two computers connected, nor have I ever done a file sharing manipulation between these two computers.
One of the files on the desk top on my MacBook, when opened reveals all my files just like the one in CA except I can't open any of them because the program cannot be found. That is not suprising at all because I never installed any of these programs.
One program did open and can be used however and that is PhotoShop which I use lot on my G5. I never installed that program on my MacBook.
How did this stuff get on my MacBook? I believe there is a bug in the Leopard CD that performs all the functions I could do manually to get this desk top to duplicate.
What do you say?

Lizard33, Welcome to the discussion area!
Do you have a .Mac account? If so you are probably seeing the new Leopard "Back to My Mac" feature in operation.

EventID 2001 after SP1 install

Similar Messages

Maybe you are looking for