EventId: 32, disk - The driver detected that the device \Device\Harddisk0\DR0 has its write cache enabled
Virtualized 2012 R2 Domain Controller running on hyper-V. Every boot lists the following error three times:
EventId: 32, disk - The driver detected that the device \Device\Harddisk0\DR0 has its write cache enabled.
Data corruption may occur.
Having checked the virtual SCSI disks all have their write cache enabled, is this correct or do I need to take some action to prevent these events?
Hi,
This is normal and you can't change it. This tells AD that write caching is enabled so it uses a different method to store information.
http://www.hyper-v.nu/archives/hvredevoort/2013/07/keeping-your-virtual-active-directory-domain-controllers-safe/
More information there.
Thanks
Denis
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
Blog: http://www.windows-support.co.uk
Twitter: LinkedIn:
Similar Messages
-
I am tring to installe OS X Mavericks. When I get to the select disk page it says that the HD is uesd as time machine drive. How can I remove time machine backup from my Mac.
Open up your Finder and click on Go on the top menu bar. Select Computer and then double click Macintosh HD. In here delete the backup folder. Might be called backups.backupdb.
-
How can i ensure that the harddisk3 designation is relatd with USB etxernal disk?
I have several erros in LOGs:
An error was detected on device \Device\Harddisk3\DR3 during a paging operation.
and
The driver detected a controller error on \Device\Harddisk3\DR7
All times are HardDisk3 and sometimes it references to DR3 and sometimes DR7
My disk structure is:
2 RAID5 arrays fomr the same disks (80GB and 2 TB)
and USB 2 TB External hard disk with several partitions
I´m 99% sure that the error is related to the external USB disk and the Dell DIag tool shows no problems with any component
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 80 GB 0 B
Disk 1 Online 2711 GB 0 B *
Disk 2 Online 1862 GB 1024 KB
DISKPART> sele disk 0
Disk 0 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: 6EFE3928
Type : RAID
Status : Online
Path : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 3 System Rese NTFS Partition 100 MB Healthy System
Volume 4 C DISCO NTFS Partition 79 GB Healthy Boot
DISKPART> sele disk 1
Disk 1 is now the selected disk.
DISKPART> detail disk
DELL PERC H700 SCSI Disk Device
Disk ID: {A42559A8-43EF-4570-B4CF-336A22A718BF}
Type : RAID
Status : Online
Path : 1
Target : 1
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0400)#PCI(0000)#RAID(P01T01L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 5 DADOS NTFS Partition 2711 GB Healthy
C:\DADOS\
DISKPART> sele disk 2
Disk 2 is now the selected disk.
DISKPART> detail disk
HP External HDD USB Device
Disk ID: 000904F0
Type : USB
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 6 SOFTWARE NTFS Partition 300 GB Healthy
C:\DADOS\DISCO-EXTRA\
Volume 7 TEMPORARIO- NTFS Partition 148 GB Healthy
C:\DADOS\NEW_TRANSF\TEMPORARIO\
Volume 8 TRANSF_LIXO NTFS Partition 149 GB Healthy
C:\DADOS\NEW_TRANSF\TRANSF_LIXO\
Volume 9 R RESTORE NTFS Partition 1264 GB HealthyHi,
For finding the exact hard disk you could refer to this article. It is an old article but the structure is not changed:
How to Distinguish a Physical Disk Device from an Event Message
http://support.microsoft.com/kb/159865
Meanwhile for the error message "error was detected on device \Device\Harddisk3\DR3 during a paging operation", according to my search result it could be related to fragments. So please try a defragment on your hard disk (if it is the USB disk then perform
a defragment on USB disk) and see the result.
If you have any feedback on our support, please send to [email protected] -
The driver detected a controller error on \Device\Harddisk1-4\DR1-4.
Hello all
I just recently bought a new gaming PC on black friday and is running just fine. Then one day i decided to take a look in the event log and i notice an error that would appear four time during startup of the machine.
The driver detected a controller error on \Device\Harddisk1\DR1.
The driver detected a controller error on \Device\Harddisk2\DR2.
The driver detected a controller error on \Device\Harddisk3\DR3.
The driver detected a controller error on \Device\Harddisk4\DR4.
I only have one internal hard drive located on disk 0 and an external located on disk 5. So i have no idea why i'm getting this error when nothing is connected.
I installed the latest controller drivers and just for fun everything else related to my GIGABYTE motherboard but unfortunately still occurs after turning my computer. (note for the bios i have version F4 not sure if updating it to F5 is worth doing for
this issue).
If anyone could help me with this error or if i can just ignore it.
Thank youAngel
If the drive is an SSD update the firmware.
Are the message an error (red symbol) or a warning (yellow symbol)?
I would also run CHKDSK and get the diagnostic utility (and run it of course) from the HD mfr.
CHKDSK /R /F
Chkdsk disclaimer: While performing chkdsk on the hard drive if any bad sectors are found any data available on that sector might be lost so as usual backup your data.
Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.
Do this for each hard drive on your system.
When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.
Then reboot and let the test run.
It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.
http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/
See "CHKDSK LogFile" below in order to check the results of the test.
CHKDSK LogFile:
Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter
Expand the Windows logs heading, then select the Application log file entry.
Double click on the Source column header.
Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).
Copy/paste the results into your next post.
Wanikiya and Dyami--Team Zigzag -
Hi!
I recently took over management of a Windows 2003 domain that had only one domain controller. I was building a second DC for redundancy and discovered that the SYSVOL share on the original DC is in "JRNL_WRAP_ERROR" after the SYSVOL and NETLOGON
share would not create on the new DC. This error goes back as far as the log goes back so I don't know how long it has been in this state.
The message in the event log states to enable "Enable Journal Wrap Automatic Restore" but I found a KB article that says to use the BurFlags key instead. http://support.microsoft.com/kb/290762
Should I run an authoritative restore since I don't have another domain controller with a good SYSVOL?
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.> The message in the event log states to enable "Enable Journal Wrap
> Automatic Restore" but I found a KB article that says to use the
> BurFlags key instead.
http://support.microsoft.com/kb/290762
>
> Should I run an authoritative restore since I don't have another domain
> controller with a good SYSVOL?
The automatic restore process AFAIK will initiate a D2 restore. And if
there's no other DC, sysvol might be gone.
I really would prefer to have control - this means I would do a D4.
Absolutely I would :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut " plays fine, HELP !!
Yes it is the right Disc...
2Z691-6040-A (OEM) Drop-in DVD...
System Requirements Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 or above to install this 10.5 upgrade.
Compatibility eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
http://www.welovemacs.com/2z6916040a.html
I'd try to find another Mac to make a DMG of it & burn a copy to see if that works better. -
We had a major storm over the weekend which caused an unexpected shutdown.
I am having an issue with one of my domain controller with Event ID 13568
The domain controller which is running Windows Server 2012 was added successfully just a couple of days ago.
I do not have a full backup of the server yet.
It only has a GC role on it.
What are the things I should look out for before I attempt to Enable Journal Wrap Automatic Restore and set it to 1?
Would it be safer to just demote the server and start from scratch?
Thank you all for reading!
Mladen
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this
error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs"
followed by "net start ntfrs" to restart the File Replication Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from
making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.I set Enable Journal Wrap Automatic Restore to 1 and it was
successful.
I will monitor it to make sure it does not occur again.
Thanks everyone on your replies
Mladen -
I want to give away or sell a 6500/250 running 7.6.1. How can the hard disk be erased so that the data are gone, not recoverable? thanks, LifeisRich
I'd recommend that you check for Mac User Group(s) in Orange County. That's where you'd likely find a diehard Mac fanatic who might want to add your 6500 to his/her collection. Even if you got nothing for it, it would be better than e-cycling it. I upgraded my 6500/275 with what was a "large" hard drive at the time (15 GBs), maxed the memory at 128 MBs, installed the 512K L2 cache card, a better ATI Rage Pro PCI graphics card, a USB PCI card, and an internal 56K modem. With it running OS 9.1, it did all of the pre-OS X stuff I needed it to do. As I previously mentioned, it's a nice-sounding MP3 player. Internet Explorer 5.1.7 (the final release from 2001) kept it useful for surfing the web up until 2005, when it became too outdated/incompatible with many web sites. Unfortunately, the demands of the internet and the need for a modern browser, as well as faster processing to digest it all, are what retired many older Macs from active duty. So my (2) 6500s and (3) 6400s (same tower design) sit in storage. There is one concern that I'll pass along: The motherboard has a 4.5-volt alkaline battery, that's a small, black plastic cube, secured in place by velcro. If your 6500 has been disconnected from electricity for a long time, the battery will undoubtedly be dead. Unlike the many Apple computers that used a small ½AA lithium battery (that I've never seen leak when completely dead), the 6500's battery can and usually does start leaking. Because the motherboard sits vertically oriented on its side edge when installed, the leaking battery will drip alkaline solution down the board, corroding any components in it path. I've seen motherboards ruined from this. If you're going to give it away or sell it, you might want to pull the motherboard (remove the two machine screws on the rear I/O panel, next to the pull tabs). Slide out the board and unplug the battery's small connector (has red & black wires), then lift up on the battery, while holding down the "toothed" velcro mount with something non-conductive, like a popsicle stick. Once it's free, dispose of the battery. If you're interested, a replacement can be purchased for about $5-$7 from battery specialty retailers - it's a Rayovac 870 or 871. Even if you don't replace it, removing one that will eventually leak is a good idea, (hopefully) before any damage is done.
-
The driver detected a controller error on \Device\Harddisk1\D
Hope someone can help, yesterday in the event viewer I encountered the following error
"The driver detected a controller error on \Device\Harddisk1\D
....I have added no new hardware for months, I checked this out on the microsoft website but they recommend changing the cable!
I ran diagnostics on the hard drives and they found no errors at all ....I got a feeling it the motherboard, frustrating as this is the second board Ive had!
Can anyone advise on this error?
My setup is as follows
P4 3.2GHZ
1GB Transcend Memory
1 NEC 2510 DVD Wrtier
1 IDE 120GB Maxtor Diamond Max
2 X SATA HDD
450 watt Thermaltake Butterfly PSUThis seems to be a common problem between ICH5 chipsets and SATA NCQ drives. Apparantly a BIOS update will be able to fixed the problem but I'm not sure which BIOS you should use. I suggest that you check MSI's website to look into your mobo's BIOS release notes to find out more first.
Please also note that there's an amount of risk to flashing your mobo's BIOS as and improper flash will caused the mobo to die immediately or having multiple errors due to bad flash. I would recommend that you flash through a floppy bootdisk which seems to be the best method till date. -
I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.comSuddenly from yesterday I am getting this error while trying to opening gmail
-
Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP. -
I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder
Djembe wrote:
UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
5. No special drivers are needed.
Thanks. What about the thunderbolt port?
7. I think Lenovo estimates 6 hours.
Lenovo says 6 hours with the 6-cell battery on its website.
BrendaEM wrote:
Hi,
There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD -
keep getting this error:
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
I've also tried in IE and got this page can not be displayed.
Cleared cache, deleted cookies.
I'm trying to access grrlzrock.com I was using it about an hour ago, and now it doesn't work. any idea?Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Google calendar is getting the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." I have tried disabling cookies, clearing cookies and cache but that didn't work.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly -
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
* This problem can sometimes be caused by disabling or refusing to accept
cookies.In my experience this is most of the times a server issue of the website provider.
Does this error occur on all Websites or just one specific Website?
Does this Website load in Internet Explorer (or any other Browser?)?
Maybe you are looking for
-
NHL Gamecenter Premium Upgrade on Samsung Galaxy TAB 2 Tablet
For the past 4 days, I have been trying to get the premium upgrade on my tablet. During this process I have been on the phone with NHL support 3x and been DMed by VZWSupport through twitter. Nothing has been resolved at all. When I install the app (Y
-
i have a login UI , when i clich on change password it opens a JDialog , i am passing 2 parameters with the call, the username and the login frame object , In the constructor of Jdialog class i am again taking 2 parameters , the username and the fram
-
Hi,does the ipod nano 5th generation have a dedicated data lead?
hi,does the ipod nano 5th gen have a dedicated usb data lead,i cannot get mine to connect to the pc?
-
Hi, Ive to connect an eDirectory to a cms application. I tried it with an Active Directory, that works fine. Is there an eDirectory test account, where I can test the eDirectory integration. I got from this http://forums.novell.com/novell-prod...sapp
-
Products are being deleted from manually created invoices upon saving.
What happens is I create a manual invoice and save it, but upon saving, some of the products are removed from the invoice. Are you only allowed to list a certain product once on an invoice? It may be this that is causing it? However I wish to list pr